diff --git a/Makefile.am b/Makefile.am
index 78e238a..9387aa6 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -29,6 +29,7 @@ xconfd_DATA = conf/xorg.conf.d/10-dummy.conf
 
 CLEANFILES = $(noinst_SCRIPTS) conf/bumblebee.conf $(bin_SCRIPTS)
 EXTRA_DIST = scripts/systemd/bumblebeed.service.in \
+	scripts/bumblebee.bash.in \
 	scripts/upstart/bumblebeed.conf.in \
 	conf/99-bumblebee-nvidia-dev.rules \
 	conf/bumblebee.conf.in \
@@ -103,10 +104,22 @@ do_subst = sed -e 's|[@]GITVERSION[@]|$(GITVERSION)|g' \
 conf/bumblebee.conf: $(srcdir)/conf/bumblebee.conf.in
 	mkdir -p conf
 	$(do_subst) < $< > $@
-
-scripts/systemd/bumblebeed.service: $(srcdir)/scripts/systemd/bumblebeed.service.in
+if CONF_WILD
+  scripts/systemd/bumblebeed.service: $(srcdir)/scripts/systemd/bumblebeed_wild.service.in
 	mkdir -p scripts/systemd
 	$(do_subst) < $< > $@
+  sbin_SCRIPTS = scripts/bumblebee.bash
+  CLEANFILES += $(sbin_SCRIPTS)
+else
+  scripts/systemd/bumblebeed.service: $(srcdir)/scripts/systemd/bumblebeed.service.in
+	mkdir -p scripts/systemd
+	$(do_subst) < $< > $@
+endif
+
+
+scripts/bumblebee.bash: $(srcdir)/scripts/bumblebee.bash.in
+	mkdir -p scripts
+	$(do_subst) < $< > $@
 
 scripts/bumblebee-bugreport: $(srcdir)/scripts/bumblebee-bugreport.in
 	mkdir -p scripts
diff --git a/conf/xorg.conf.nvidia b/conf/xorg.conf.nvidia
index 5bd686e..73c1c6e 100644
--- a/conf/xorg.conf.nvidia
+++ b/conf/xorg.conf.nvidia
@@ -29,8 +29,8 @@ Section "Device"
     Option "ProbeAllGpus" "false"
 
     Option "NoLogo" "true"
-    Option "UseEDID" "false"
-    Option "UseDisplayDevice" "none"
+#    Option "UseEDID" "false"
+#    Option "UseDisplayDevice" "none"
 
 #   If your NVIDIA drivers are version 331.13 or newer, and you have a laptop
 #   where some of the video outputs such as HDMI or DisplayPort are connected
@@ -39,5 +39,5 @@ Section "Device"
 #   below to allow using the external monitor when it is connected while also
 #   allowing the X server to start when the monitor is disconnected.
 
-#   Option "AllowEmptyInitialConfiguration"
+    Option "AllowEmptyInitialConfiguration"
 EndSection
diff --git a/configure.ac b/configure.ac
index 65b2bb0..bfbf500 100644
--- a/configure.ac
+++ b/configure.ac
@@ -101,6 +101,17 @@ AS_IF([test "x$with_pidfile" != xno],
 	])
 AM_CONDITIONAL([WITH_PIDFILE], [test "x$with_pidfile" != xno])
 
+
+AC_ARG_ENABLE([wild],
+[  --enable-wild    Turn on wildcard support],
+[case "${enableval}" in
+  yes) conf_wild=yes ;;
+  no)  conf_wild=no ;;
+  *) AC_MSG_ERROR([bad value ${enableval} for --enable-wild]) ;;
+esac],[conf_wild=no])
+AM_CONDITIONAL([CONF_WILD], [test "x$conf_wild" != xno])
+
+
 UDEV_RULES_DIR=/lib/udev/rules.d
 AC_ARG_WITH([udev-rules],
 	[AS_HELP_STRING([--with-udev-rules@<:@=DIR@:>@],
diff --git a/quickinstall.bash b/quickinstall.bash
new file mode 100644
index 0000000..07f5ae1
--- /dev/null
+++ b/quickinstall.bash
@@ -0,0 +1,14 @@
+#!/bin/bash
+
+autoreconf -fi
+./configure CONF_DRIVER=nvidia CONF_DRIVER_MODULE_NVIDIA=nvidia-375 \
+  CONF_PRIMUS_LD_PATH=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus \
+  CONF_LDPATH_NVIDIA=/usr/lib/nvidia-375:/usr/lib32/nvidia-375 \
+  CONF_MODPATH_NVIDIA=/usr/lib/nvidia-375/xorg,/usr/lib/xorg/modules \
+
+make clean
+make
+sudo make install
+sudo cp scripts/systemd/bumblebeed.service /lib/systemd/system/.
+
+
diff --git a/quickinstall_wild.bash b/quickinstall_wild.bash
new file mode 100644
index 0000000..8a069e0
--- /dev/null
+++ b/quickinstall_wild.bash
@@ -0,0 +1,14 @@
+#!/bin/bash
+
+autoreconf -fi
+./configure CONF_DRIVER=nvidia CONF_DRIVER_MODULE_NVIDIA=nvidia???? \
+  CONF_PRIMUS_LD_PATH=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus \
+  CONF_LDPATH_NVIDIA=/usr/lib/nvidia????:/usr/lib32/nvidia???? \
+  CONF_MODPATH_NVIDIA=/usr/lib/nvidia????/xorg,/usr/lib/xorg/modules \
+  --enable-wild
+make clean
+make
+sudo make install
+sudo cp scripts/systemd/bumblebeed.service /lib/systemd/system/.
+
+
diff --git a/scripts/bumblebee.bash.in b/scripts/bumblebee.bash.in
new file mode 100644
index 0000000..df3adaa
--- /dev/null
+++ b/scripts/bumblebee.bash.in
@@ -0,0 +1,52 @@
+#!/bin/bash
+
+
+if [ 0 -eq $# ]
+then
+  ConfFile="@BBCONFDIR@/bumblebee.conf"
+else
+  ConfFile=$1
+fi
+
+
+ConfDriver=$( crudini --get $ConfFile bumblebeed driver )
+ConfKernelDriver=$( crudini --get $ConfFile driver-nvidia kerneldriver )
+ConfLibraryPath=$( crudini --get $ConfFile driver-nvidia librarypath )
+ConfXorgModulePath=$( crudini --get $ConfFile driver-nvidia xorgmodulepath )
+
+echo "Bumblebee config file: $ConfFile"
+echo "  Raw config parameters: "
+echo "    Driver = $ConfDriver"
+echo "    KernelDriver = $ConfKernelDriver"
+echo "    LibraryPath = $ConfLibraryPath"
+echo "    XorgModulePath = $ConfXorgModulePath"
+
+Driver=$ConfDriver
+
+KernelDriver=$(find /lib/modules/$(uname -r) -name $ConfKernelDriver.ko -printf "%f\n" | tail --lines=1 )
+KernelDriver=${KernelDriver:0:-3}
+
+LibraryPath=
+for i in $(echo "$ConfLibraryPath" | sed "s/:/ /g")
+do
+  LibraryPath=$LibraryPath:$(ls -drt $i | tail --lines=1 )
+done
+LibraryPath=${LibraryPath:1}
+
+XorgModulePath=
+for i in $(echo "$ConfXorgModulePath" | sed "s/,/ /g")
+do
+  XorgModulePath=$XorgModulePath,$(ls -drt $i | tail --lines=1 )
+done
+XorgModulePath=${XorgModulePath:1}
+
+echo "  After applying wildcard:"
+echo "    Driver = $Driver"
+echo "    KernelDriver = $KernelDriver"
+echo "    LibraryPath = $LibraryPath"
+echo "    XorgModulePath = $XorgModulePath"
+
+bboptions="--driver $Driver --driver-module $KernelDriver --ldpath $LibraryPath --module-path $XorgModulePath"
+
+@SBINDIR@/bumblebeed -C $ConfFile -vvvv --use-syslog $bboptions
+
diff --git a/scripts/systemd/bumblebeed_wild.service.in b/scripts/systemd/bumblebeed_wild.service.in
new file mode 100644
index 0000000..a94ff02
--- /dev/null
+++ b/scripts/systemd/bumblebeed_wild.service.in
@@ -0,0 +1,12 @@
+[Unit]
+Description=Bumblebee C Daemon
+
+[Service]
+Type=simple
+ExecStartPre=-/usr/bin/prime-select intel
+ExecStart=@SBINDIR@/bumblebee.bash @BBCONFDIR@/bumblebee.conf
+Restart=always
+RestartSec=60
+
+[Install]
+WantedBy=multi-user.target