consult some suggestions

[Learnconfig]

Dear author：
I scan the README.md.I want to consult some suggestions.The program only support Texas Instruments MCU.Does this project support STM32 family MCU or GD32 series such as STM32F407VET6，GD32F407VET6.
all best for you

[SummerFalls]

@Learnconfig

English machine translation version:

Hello, Leo

There are two warehouses. Please pay attention to distinguish them

1. The release package in this repository at https://github.com/DigitalAllianceStudio/HSS_DataVisualizer only supports the Windows 64-bit operating system. The package includes HSS_DataVisualizer.exe and UNI_DataVisualizer.exe. Note: Currently, both HSS_DataVisualizer.exe and UNI_DataVisualizer.exe in the release package only support the HSS mode. The RTT mode has been developed but has not been officially released yet.

HSS_DataVisualizer is dedicated to JLink/JTrace (it can achieve a higher sampling rate, of course, it also depends on your JLink model. If it is JLink Plus or lower model, the HSS mode is only 1Khz). It supports ARM architecture, including the STM32, GD32, and other series you mentioned. The specific chip models supported depend on the JLink driver software you have installed.

The versatility of UNI_DataVisualizer is higher, but its sampling performance is inferior to that of HSS_DataVisualizer.
The UNI_DataVisualizer debugger supports: ST-Link V2/V3, J-Link, Black Magic, FTDI (such as Olimex ARM-USB series debuggers: OLIMEX-ARM-USB-TINY-H, OLIMEX-ARM-USB-TINY, OLIMEX-ARM-USB-OCD-H, OLIMEX-ARM-USB-OCD), WCH-Link, CH347usbjtag, and Glasgow Interface Explorer. The UNI_DataVisualizer chip supports mainstream ARM/RISC-V/XTENSA architecture chips. If the chip model you are using is not listed in the built-in chip support list, you can add support for that series of chips by manually adding the chip's pack support package in UNI_DataVisualizer.

2. The release package in the repository: https://github.com/DigitalAllianceStudio/DSS_DataVisualizer, only supports the Windows 64-bit operating system. The package contains DSS_DataVisualizer.exe

DSS_DataVisualizer is dedicated to TI chips and TI debuggers. The supported chip series include but are not limited to: TI C2000, TI MSP430, and the supported debuggers include but are not limited to: XDS110, XDS100 v2, XDS100 v3, XDS560, etc

Original Chinese version:

你好，Leo

有两个仓库请注意分辨

1. https://github.com/DigitalAllianceStudio/HSS_DataVisualizer

本仓库中的发布包仅支持 Windows 64bit 操作系统，发布包内含 HSS_DataVisualizer.exe 和 UNI_DataVisualizer.exe
注意：当前发布包内的 HSS_DataVisualizer.exe 和 UNI_DataVisualizer.exe 均只支持 HSS 模式，RTT 模式已经开发完成，但是还未正式发布。

HSS_DataVisualizer

HSS_DataVisualizer 为 JLink/JTrace 专用（所能达到的采样速率更高，当然也取决于你的 JLink 型号，如果是 JLink Plus 及以下版本，HSS 模式仅 1Khz），支持 ARM 架构，其中就包括你说的 STM32、GD32 等系列，具体支持的芯片型号取决于你所安装的 JLink 驱动软件。

UNI_DataVisualizer

UNI_DataVisualizer 的通用性则更高，但是采样性能不如 HSS_DataVisualizer。
UNI_DataVisualizer 调试器支持：ST-Link V2/V3、J-Link、Black Magic、FTDI（例如 Olimex ARM-USB 系列调试器：OLIMEX-ARM-USB-TINY-H、OLIMEX-ARM-USB-TINY、OLIMEX-ARM-USB-OCD-H、OLIMEX-ARM-USB-OCD）、WCH-Link、CH347usbjtag、Glasgow Interface Explorer
UNI_DataVisualizer 芯片支持：支持主流的 ARM/RISC-V/XTENSA 架构的芯片，如若内建的芯片支持列表不存在你所使用的芯片型号，你可以通过在 UNI_DataVisualizer 中手动添加芯片的 pack 支持包来添加对该系列芯片的支持。

2. https://github.com/DigitalAllianceStudio/DSS_DataVisualizer

本仓库中的发布包仅支持 Windows 64bit 操作系统，发布包内含 DSS_DataVisualizer.exe

DSS_DataVisualizer

DSS_DataVisualizer 为 TI 芯片、TI 调试器专用，支持的芯片系列包括但不限于：TI C2000、TI MSP430，支持的调试器包括但不限于：XDS110、XDS100 v2、XDS100 v3、XDS560 等

[SummerFalls]

EN:
In addition, the current three software programs do not support multiple languages and only support Chinese. If you are a native English speaker, you may need to use on-screen translation software during the initial stage. Currently, there are no clear plans for multi-language support.

Additionally, there are respective function menus available by right-clicking on the blank space of the interface and on the variable observation list.

CN:
另外，当前的 3 个软件都没有做多语言适配，仅支持中文，如果你是英语为母语，初期使用可能需要借助屏幕划词翻译软件。对于多语言的支持，目前还没有明确的计划。

另外一提：界面空白处右键、变量观测列表右键，有各自的功能菜单。