From f45fe52ea26a26e241b8ee268eb0206948b3e9b8 Mon Sep 17 00:00:00 2001 From: x-shark <958274685@qq.com> Date: Wed, 29 Apr 2026 17:29:18 +0800 Subject: [PATCH 1/2] add c2000_max led Co-authored-by: Copilot --- .../qmodem/files/etc/init.d/qmodem_led | 45 ++++ .../usr/share/qmodem/led_scripts/c2000_max.sh | 205 ++++++++++++++++++ 2 files changed, 250 insertions(+) create mode 100644 application/qmodem/files/etc/init.d/qmodem_led create mode 100755 application/qmodem/files/usr/share/qmodem/led_scripts/c2000_max.sh diff --git a/application/qmodem/files/etc/init.d/qmodem_led b/application/qmodem/files/etc/init.d/qmodem_led new file mode 100644 index 00000000..73f4bba1 --- /dev/null +++ b/application/qmodem/files/etc/init.d/qmodem_led @@ -0,0 +1,45 @@ +#!/bin/sh /etc/rc.common +START=99 +STOP=13 +USE_PROCD=1 + +service_triggers() +{ + procd_add_reload_trigger "qmodem" + +} + +start_service(){ + load_led_services +} + +stop_service(){ + config_load qmodem + config_foreach _turn_off_leds modem-device +} + +load_led_services(){ + config_load qmodem + config_foreach _led_services modem-device +} + + +_led_services() +{ + local led_script + config_get led_script "$1" led_script + if [ -n "$led_script" ] && [ -x "/usr/share/qmodem/led_scripts/${led_script}.sh" ]; then + procd_open_instance led_$1 + procd_set_param command "/usr/share/qmodem/led_scripts/${led_script}.sh" "$1" + procd_set_param respawn 120 15 10 + procd_close_instance + fi +} + +_turn_off_leds(){ + local led_script + config_get led_script "$1" led_script + if [ -n "$led_script" ] && [ -x "/usr/share/qmodem/led_scripts/${led_script}.sh" ]; then + /usr/share/qmodem/led_scripts/${led_script}.sh "$1" "off" + fi +} \ No newline at end of file diff --git a/application/qmodem/files/usr/share/qmodem/led_scripts/c2000_max.sh b/application/qmodem/files/usr/share/qmodem/led_scripts/c2000_max.sh new file mode 100755 index 00000000..ea4c9d7a --- /dev/null +++ b/application/qmodem/files/usr/share/qmodem/led_scripts/c2000_max.sh @@ -0,0 +1,205 @@ +#!/bin/sh + +# envs +# led names +# LED_4G_POOR="red:4g" +# LED_4G_GOOD="blue:4g" +# LED_5G_POOR="red:5g" +# LED_5G_GOOD="blue:5g" +# LED_INTERNET_BLUE="blue:internet" +# LED_INTERNET_RED="red:internet" +# modem_cfg +# MODEM_CFG / AT_PORT / NET_DEV / USE_UBUS_DAEMON + +. /usr/share/qmodem/modem_util.sh +. /lib/functions.sh +LED_SIG1="hc:blue:sig1" +LED_SIG2="hc:blue:sig2" +LED_SIG3="hc:blue:sig3" +LED_STATUS="hc:blue:status" +LED_ERROR="hc:red:error" +MODEM_CFG=$1 +ON_OFF=$2 + +update_cfg(){ + config_load qmodem + config_get AT_PORT "$MODEM_CFG" at_port + config_get ALIAS "$MODEM_CFG" alias + config_get USE_UBUS "$MODEM_CFG" use_ubus + [ "$USE_UBUS" = "1" ] && use_ubus_flag="-u" +} + +update_netdev(){ + # if alias is set, network config name is alias else modem_cfg name + config_load network + if [ -n "$ALIAS" ]; then + config_get NET_DEV "$ALIAS" ifname + else + config_get NET_DEV "$MODEM_CFG" ifname + fi +} +last_siminserted="" +last_netstat="" +poll_counter=0 + +led_turn() { + local path="/sys/class/leds/$1" + local value="$2" + max_brightness=$(cat "$path/max_brightness") + if [ "$value" = "1" ]; then + brightness=$max_brightness + else + brightness="0" + fi + echo "$brightness" > "$path/brightness" +} + +led_heartbeat() { + local path="/sys/class/leds/$1" + max_brightness=$(cat "$path/max_brightness") + + echo "$max_brightness" > "$path/brightness" + echo "heartbeat" > "$path/trigger" +} + +led_netdev() { + local path="/sys/class/leds/$1" + local device="$2" + + echo "1" > "$path/brightness" + echo "netdev" > "$path/trigger" + echo "$device" > "$path/device_name" + echo "1" > "$path/link" + echo "1" > "$path/rx" + echo "1" > "$path/tx" +} + +led_off_all() { + led_turn "${LED_SIG1}" "0" + led_turn "${LED_SIG2}" "0" + led_turn "${LED_SIG3}" "0" +} + +sim_inserted() { + sim_status=$(/usr/share/qmodem/modem_ctrl.sh sim_info "$MODEM_CFG" | jq -r '.modem_info[] | select(.key=="SIM Status") | .value') + if [ "$sim_status" = "ready" ]; then + echo "1" + else + echo "0" + fi +} + +internet_led() { + if wget-ssl --spider --quiet --tries=1 --timeout=3 www.baidu.com; then + led_turn "${LED_STATUS}" "1" + led_turn "${LED_ERROR}" "0" + else + led_turn "${LED_STATUS}" "0" + led_turn "${LED_ERROR}" "1" + fi +} + +get_mode() { + local rat_mode="$1" + rat_code=$(at $AT_PORT "AT+COPS?" | grep +COPS: | awk -F, '{print $4}' | tr -d '"') + [ "$rat_code" -le "7" ] && echo "0" || echo "1" +} + +get_rsrq() { + rsrq=$(/usr/share/qmodem/modem_ctrl.sh cell_info "$MODEM_CFG" | jq -r '.modem_info[] | select(.key=="RSRQ") | .value') + # if rsrq is empty, return -999 + [ -z "$rsrq" ] && rsrq="-999" + # if rsrq out of range, return -999 + if [ "$rsrq" -gt "20" ] || [ "$rsrq" -lt "-43" ]; then + rsrq="-999" + fi + echo "$rsrq" +} + +main() { + local siminserted="$(sim_inserted)" + if [ "$siminserted" = "0" ] && [ "$siminserted" = "$last_siminserted" ]; then + # there's no update, return + return + fi + + last_siminserted="$siminserted" + + if [ "$siminserted" = "0" ]; then + led_off_all + led_turn "${LED_ERROR}" "1" + + last_netstat="" + return + fi + + local is_nr=$(get_mode) + local rsrq=$(get_rsrq) + local signal="0" + + # 根据RSRQ信号质量划分三档 + # RSRQ >= -12 dBm: 高信号 + # -19 dBm <= RSRQ < -12 dBm: 中信号 + # RSRQ < -19 dBm: 低信号 + if [ "$rsrq" = "-999" ]; then + signal="-1" + elif [ "$rsrq" -ge "-12" ]; then + signal="2" + elif [ "$rsrq" -ge "-19" ]; then + signal="1" + else + signal="0" + fi + + netstat="${NET_DEV}_${is_nr}_${signal}" + if [ "$netstat" = "$last_netstat" ]; then + # there's no update, return + return + fi + last_netstat="$netstat" + + case "$signal" in + "-1") + # 无信号，轮询显示sig1、sig2、sig3 + led_off_all + poll_counter=$((poll_counter % 3)) + case "$poll_counter" in + "0") + led_turn "${LED_SIG1}" "1" + ;; + "1") + led_turn "${LED_SIG2}" "1" + ;; + "2") + led_turn "${LED_SIG3}" "1" + ;; + esac + poll_counter=$((poll_counter + 1)) + ;; + "0") + led_off_all + led_turn "${LED_SIG3}" "1" + ;; + "1") + led_off_all + led_turn "${LED_SIG2}" "1" + ;; + "2") + led_off_all + led_turn "${LED_SIG1}" "1" + ;; + esac +} + +# Loop forever +update_cfg +if [ "$ON_OFF" = "off" ]; then + led_off_all + exit 0 +fi +while true; do + update_netdev + main + internet_led + sleep 5s +done From 7f367972b1a33764443ac8daeea966b594f1d620 Mon Sep 17 00:00:00 2001 From: x-shark <958274685@qq.com> Date: Wed, 29 Apr 2026 23:13:47 +0800 Subject: [PATCH 2/2] add c2000_max leds display Co-authored-by: Copilot --- .../files/etc/uci-defaults/99-add-5g-handler | 6 ++ .../usr/share/qmodem/led_scripts/c2000_max.sh | 99 ++++++++++++------- 2 files changed, 72 insertions(+), 33 deletions(-) diff --git a/application/qmodem/files/etc/uci-defaults/99-add-5g-handler b/application/qmodem/files/etc/uci-defaults/99-add-5g-handler index d38a2b19..12324980 100755 --- a/application/qmodem/files/etc/uci-defaults/99-add-5g-handler +++ b/application/qmodem/files/etc/uci-defaults/99-add-5g-handler @@ -34,6 +34,12 @@ modem_settings() #set led script uci set qmodem.wwan0.led_script="m60k63" ;; + nradio,c2000-max) + #usb slot 2-1 + add_usb_slot_cfg "eth2" "2-1" "eth2" "" "" "" "" "" ""\ + #set led script + uci set qmodem.wwan0.led_script="c2000-max" + ;; hiveton,h5000m) #usb slot uci set qmodem.usb0="modem-slot" diff --git a/application/qmodem/files/usr/share/qmodem/led_scripts/c2000_max.sh b/application/qmodem/files/usr/share/qmodem/led_scripts/c2000_max.sh index ea4c9d7a..6047bb34 100755 --- a/application/qmodem/files/usr/share/qmodem/led_scripts/c2000_max.sh +++ b/application/qmodem/files/usr/share/qmodem/led_scripts/c2000_max.sh @@ -1,5 +1,8 @@ #!/bin/sh - +# Copyright (C) 2026 x-shark +_Vendor="nradio c2000-max" +_Author="x-shark" +_Maintainer="x-shark " # envs # led names # LED_4G_POOR="red:4g" @@ -81,7 +84,7 @@ led_off_all() { } sim_inserted() { - sim_status=$(/usr/share/qmodem/modem_ctrl.sh sim_info "$MODEM_CFG" | jq -r '.modem_info[] | select(.key=="SIM Status") | .value') + sim_status=$(ubus call qmodem sim_info "{\"config_section\":\"$MODEM_CFG\"}" | jq -r '.modem_info[] | select(.key=="SIM Status") | .value') if [ "$sim_status" = "ready" ]; then echo "1" else @@ -100,20 +103,27 @@ internet_led() { } get_mode() { - local rat_mode="$1" - rat_code=$(at $AT_PORT "AT+COPS?" | grep +COPS: | awk -F, '{print $4}' | tr -d '"') - [ "$rat_code" -le "7" ] && echo "0" || echo "1" + local network_mode=$(ubus call qmodem cell_info "{\"config_section\":\"$MODEM_CFG\"}" | jq -r '.modem_info[] | select(.key=="network_mode") | .value') + if [[ "$network_mode" == *"5G"* ]] || [[ "$network_mode" == *"NR"* ]]; then + echo "1" + else + echo "0" + fi } get_rsrq() { - rsrq=$(/usr/share/qmodem/modem_ctrl.sh cell_info "$MODEM_CFG" | jq -r '.modem_info[] | select(.key=="RSRQ") | .value') - # if rsrq is empty, return -999 - [ -z "$rsrq" ] && rsrq="-999" - # if rsrq out of range, return -999 + rsrq=$(ubus call qmodem cell_info "{\"config_section\":\"$MODEM_CFG\"}" | jq -r '.modem_info[] | select(.key=="RSRQ") | .value') + # if rsrq is empty or null, return -1 to indicate no signal + if [ -z "$rsrq" ] || [ "$rsrq" = "null" ]; then + echo "-1" + return + fi + # if rsrq out of range, return -1 if [ "$rsrq" -gt "20" ] || [ "$rsrq" -lt "-43" ]; then - rsrq="-999" + echo "-1" + else + echo "$rsrq" fi - echo "$rsrq" } main() { @@ -141,7 +151,7 @@ main() { # RSRQ >= -12 dBm: 高信号 # -19 dBm <= RSRQ < -12 dBm: 中信号 # RSRQ < -19 dBm: 低信号 - if [ "$rsrq" = "-999" ]; then + if [ "$rsrq" = "-1" ]; then signal="-1" elif [ "$rsrq" -ge "-12" ]; then signal="2" @@ -152,30 +162,15 @@ main() { fi netstat="${NET_DEV}_${is_nr}_${signal}" - if [ "$netstat" = "$last_netstat" ]; then + + # 非轮询模式才检查是否有更新 + if [ "$signal" != "-1" ] && [ "$netstat" = "$last_netstat" ]; then # there's no update, return return fi last_netstat="$netstat" case "$signal" in - "-1") - # 无信号，轮询显示sig1、sig2、sig3 - led_off_all - poll_counter=$((poll_counter % 3)) - case "$poll_counter" in - "0") - led_turn "${LED_SIG1}" "1" - ;; - "1") - led_turn "${LED_SIG2}" "1" - ;; - "2") - led_turn "${LED_SIG3}" "1" - ;; - esac - poll_counter=$((poll_counter + 1)) - ;; "0") led_off_all led_turn "${LED_SIG3}" "1" @@ -191,6 +186,23 @@ main() { esac } +polling_display() { + local count=$1 + led_off_all + case $((poll_counter % 3)) in + "0") + led_turn "${LED_SIG1}" "1" + ;; + "1") + led_turn "${LED_SIG2}" "1" + ;; + "2") + led_turn "${LED_SIG3}" "1" + ;; + esac + poll_counter=$((poll_counter + 1)) +} + # Loop forever update_cfg if [ "$ON_OFF" = "off" ]; then @@ -199,7 +211,28 @@ if [ "$ON_OFF" = "off" ]; then fi while true; do update_netdev - main - internet_led - sleep 5s + + # 检查是否进入轮询模式 + siminserted="$(sim_inserted)" + if [ "$siminserted" = "1" ]; then + rsrq=$(ubus call qmodem cell_info "{\"config_section\":\"$MODEM_CFG\"}" | jq -r '.modem_info[] | select(.key=="RSRQ") | .value') + # 当rsrq为空时进入轮询模式 + if [ -z "$rsrq" ] || [ "$rsrq" = "null" ]; then + # 进入轮询模式：在5秒内以1秒间隔轮询显示 + for i in 1 2 3 4 5; do + polling_display + sleep 1s + done + else + # 正常模式：执行主程序并等待5秒 + main + internet_led + sleep 5s + fi + else + # SIM卡未插入 + main + internet_led + sleep 5s + fi done