instalacja

[bogut82]

Cześć,

wybacznie za lamerstwo ale mam problem z instalacją tego dodatku. po skopiowaniu plików do katalogu nic nie widać. druga metoda przez hacs działa połownicznie tj. dodatek jest widoczny:

ale w integracjach już mi tego nie znajduje:

Dopiero zaczynam swoją przygodę z HA więc mogę czegoś jeszcze nie wiedzieć.

ps. restarty robione klikukrotnie nie pomagają

z góry dzięki za pomoc, Łukasz

[djg-io]

Niestety mam tak samo:( Najnowsza dostępna wersja HA.
W zeszłym tygodniu wymieniony zostal rekuperator ze sterownikiem tech. Szkoda, że projekt nie jest rozwijany. Pozdrawiam

[xeolcz]

I have the same problem, any solution?

[djg-io]

I have the same problem, any solution?

Try this one fork: https://github.com/souzen/tech-controllers. Works for me (installation).

[Kacper2Kaczmarek]

I have the same problem, any solution?

Try this one fork: https://github.com/souzen/tech-controllers. Works for me (installation).

Is it still working for you? I'm trying to install it and it's not showing up in the Add integrations menu

[djg-io]

Yes, it is but ... my module is not supported Karino ST-340 v.1.0.22 (recuperator) so i can't see any entities. Just active integration :( wt., 4 paź 2022 o 17:45 Kacper2Kaczmarek ***@***.***> napisał(a):

…

I have the same problem, any solution? Try this one fork: https://github.com/souzen/tech-controllers. Works for me (installation). Is it still working for you? I'm trying to install it and it's not showing up in the Add integrations menu — Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAEWBZAYHNJ2S6ZUILOS45LWBRGH3ANCNFSM52OZAZCA> . You are receiving this because you commented.Message ID: ***@***.***>

[djg-io]

Can someone help me add support for Tech controler Karino ST-340 v.1.0.22 (recuperator)? I would like to be able to read the temperature, change the fan speed, turn on, turn off the bypass and airing.

[Zbiku91]

Same here... controller WANAS: ST-340 V2 (v.2.0.11), added to the HA but no entity available.
I was able to get the API response from the driver's api but probably this needs to be implemented...
FYI, this is the JSON response:
{ "zones": { "transaction_time": null, "elements": [], "globalSchedules": { "time": null, "duringChange": null, "elements": [] }, "controllerParameters": {} }, "tiles": [ { "id": 5509, "parentId": 0, "type": 50, "menuId": 0, "orderId": null, "visibility": true, "params": { "description": "Controller software version", "version": "2.0.11", "txtId": 1634, "iconId": 29, "companyId": 23, "controllerName": "ST-340 V2", "mainControllerId": 93 } }, { "id": 5761, "parentId": 0, "type": 1, "menuId": 0, "orderId": null, "visibility": true, "params": { "description": "Temperature sensor", "workingStatus": true, "txtId": 795, "value": 110, "batteryLevel": null, "signalStrength": null } }, { "id": 5785, "parentId": 0, "type": 1, "menuId": 0, "orderId": null, "visibility": true, "params": { "description": "Temperature sensor", "workingStatus": true, "txtId": 1841, "value": 132, "batteryLevel": null, "signalStrength": null } }, { "id": 6038, "parentId": 0, "type": 1, "menuId": 0, "orderId": null, "visibility": true, "params": { "description": "Temperature sensor", "workingStatus": true, "txtId": 1840, "value": 131, "batteryLevel": null, "signalStrength": null } }, { "id": 6039, "parentId": 0, "type": 1, "menuId": 0, "orderId": null, "visibility": true, "params": { "description": "Temperature sensor", "workingStatus": true, "txtId": 1842, "value": 107, "batteryLevel": null, "signalStrength": null } }, { "id": 6050, "parentId": 0, "type": 11, "menuId": 1049, "orderId": null, "visibility": true, "params": { "description": "Relay", "workingStatus": false, "txtId": 1814, "iconId": 123 } }, { "id": 6051, "parentId": 0, "type": 6, "menuId": 1051, "orderId": null, "visibility": true, "params": { "description": "Universal status with widgets", "statusId": 1, "iconId": 86, "widget1": { "txtId": 0, "value": 0, "unit": -1, "type": 0, "params": [ 0, 0, 0, 0, 0 ] }, "widget2": { "txtId": 5756, "value": 0, "unit": 14, "type": 1, "params": [ 0, 0, 0, 0, 0 ] } } }, { "id": 6053, "parentId": 0, "type": 6, "menuId": 1053, "orderId": null, "visibility": true, "params": { "description": "Universal status with widgets", "statusId": 0, "iconId": 5, "widget1": { "txtId": 0, "value": 0, "unit": -1, "type": 0, "params": [ 0, 0, 0, 0, 0 ] }, "widget2": { "txtId": 1843, "value": 0, "unit": 16, "type": 1, "params": [ 0, 0, 0, 0, 0 ] } } }, { "id": 6054, "parentId": 0, "type": 6, "menuId": 1054, "orderId": null, "visibility": true, "params": { "description": "Universal status with widgets", "statusId": 0, "iconId": 146, "widget1": { "txtId": 0, "value": 0, "unit": -1, "type": 0, "params": [ 0, 0, 0, 0, 0 ] }, "widget2": { "txtId": 1844, "value": 0, "unit": 17, "type": 1, "params": [ 0, 0, 0, 0, 0 ] } } }, { "id": 6073, "parentId": 0, "type": 41, "menuId": 0, "orderId": null, "visibility": true, "params": { "description": "Date", "year": 2023, "month": 4, "day": 19, "dayId": 3, "hours": 8, "minutes": 33 } }, { "id": 6341, "parentId": 0, "type": 6, "menuId": 0, "orderId": null, "visibility": true, "params": { "description": "Universal status with widgets", "statusId": 0, "iconId": 102, "widget1": { "txtId": 0, "value": 0, "unit": -1, "type": 0, "params": [ 0, 0, 0, 0, 0 ] }, "widget2": { "txtId": 6158, "value": 12, "unit": 0, "type": 1, "params": [ 0, 0, 0, 0, 0 ] } } }, { "id": 6342, "parentId": 0, "type": 6, "menuId": 0, "orderId": null, "visibility": true, "params": { "description": "Universal status with widgets", "statusId": 0, "iconId": 102, "widget1": { "txtId": 0, "value": 0, "unit": -1, "type": 0, "params": [ 0, 0, 0, 0, 0 ] }, "widget2": { "txtId": 6157, "value": 21, "unit": 0, "type": 1, "params": [ 0, 0, 0, 0, 0 ] } } }, { "id": 6445, "parentId": 0, "type": 11, "menuId": 1445, "orderId": null, "visibility": true, "params": { "description": "Relay", "workingStatus": false, "txtId": 1844, "iconId": 123 } } ] }

[djg-io]

Modbu isn't working for me too:/ Anyone have an example of reading data from st-340 using modbus?

[kLaMeRsIk]

I also have ST-340 so if anyone knows how to connect it with HA, I will be grateful for help.