From 1e64d9b8ba9910f90a928e956cc02348550b7224 Mon Sep 17 00:00:00 2001
From: dominiquef <dominiquef@mirageoscience.com>
Date: Tue, 29 Apr 2025 13:06:21 -0700
Subject: [PATCH 1/2] Update uijson

---
 .../uijson/plate_simulation.ui.json           | 493 +++++++++---------
 1 file changed, 251 insertions(+), 242 deletions(-)

diff --git a/plate_simulation-assets/uijson/plate_simulation.ui.json b/plate_simulation-assets/uijson/plate_simulation.ui.json
index 8ca757a..773b8d2 100644
--- a/plate_simulation-assets/uijson/plate_simulation.ui.json
+++ b/plate_simulation-assets/uijson/plate_simulation.ui.json
@@ -1,244 +1,253 @@
 {
-  "title": "Plate simulation",
-  "run_command": "plate_simulation.driver",
-  "conda_environment": "plate_simulation",
-  "monitoring_directory": "",
-  "geoh5": "",
-  "workspace_geoh5": "",
-  "simulation": {
-    "main": true,
-    "label": "TEM SimPEG Group",
-    "groupType": "{55ed3daf-c192-4d4b-a439-60fa987fe2b8}",
-    "value": "",
-    "enabled": true,
-    "tooltip": "Forward modelling SimPEG group with at least the topogarphy and survey set. "
-  },
-  "name": {
-    "main": true,
-    "label": "Label",
-    "value": "plate",
-    "enabled": true,
-    "tooltip": "Provide the name for the result group."
-  },
-  "background": {
-    "main": true,
-    "group": "Basement",
-    "label": "Physical property (SI)",
-    "value": 2000.0,
-    "tooltip": "Value of the basement resisitivity (ohm-m), density (g/cc) or susceptibility (SI)",
-    "enabled": true
-  },
-  "overburden": {
-    "main": true,
-    "group": "Overburden",
-    "label": "Physical property (SI)",
-    "value": 8000.0,
-    "tooltip": "Value of the overburden resisitivity (ohm-m), density (g/cc) or susceptibility (SI)",
-    "enabled": true
-  },
-  "thickness": {
-    "main": true,
-    "group": "Overburden",
-    "label": "Thickness",
-    "value": 200.0,
-    "enabled": true,
-    "tooltip": "Thickness of the overburden."
-  },
-  "number": {
-    "main": true,
-    "group": "Plate",
-    "label": "Number of plates",
-    "value": 1,
-    "enabled": true,
-    "tooltip": "If more than one the plates will be parallel, equally spaced over the center of the model."
-  },
-  "spacing": {
-    "main": true,
-    "group": "Plate",
-    "label": "Spacing (m)",
-    "value": 0.0,
-    "enabled": true,
-    "tooltip": "Spacing between plates."
-  },
-  "plate": {
-    "main": true,
-    "group": "Plate",
-    "label": "Physical property (SI)",
-    "value": 20.0,
-    "tooltip": "Value of the plate resisitivity (ohm-m), density (g/cc) or susceptibility (SI)",
-    "enabled": true
-  },
-  "width": {
-    "label": "Thickness",
-    "group": "Plate",
-    "main": true,
-    "value": 90.0,
-    "enabled": true,
-    "tooltip": "Thickness of the plate."
-  },
-  "strike_length": {
-    "label": "Strike Length",
-    "group": "Plate",
-    "main": true,
-    "value": 800.0,
-    "enabled": true,
-    "tooltip": "Length of the plate along the strike direction."
-  },
-  "dip_length": {
-    "label": "Dip Length",
-    "group": "Plate",
-    "main": true,
-    "value": 800.0,
-    "enabled": true,
-    "tooltip": "Length of the plate along the dip direction."
-  },
-  "dip": {
-    "label": "Dip",
-    "group": "Plate",
-    "main": true,
-    "value": 60.0,
-    "enabled": true,
-    "min": 0.0,
-    "max": 90.0,
-    "tooltip": "Dip of the plate in degrees from horizontal."
-  },
-  "dip_direction": {
-    "label": "Dip Direction",
-    "group": "Plate",
-    "main": true,
-    "value": 90.0,
-    "enabled": true,
-    "min": 0.0,
-    "max": 360.0,
-    "tooltip": "Direction of the dip vector in degrees from North."
-  },
-  "relative_locations": {
-    "label": "Relative locations",
-    "main": true,
-    "group": "Plate",
-    "value": true,
-    "enabled": true,
-    "tooltip": "If checked locations are relative to the survey center and either topography or overburden in z according to 'Depth reference' selection."
-  },
-  "easting": {
-    "label": "Easting (m)",
-    "group": "Plate",
-    "main": true,
-    "value": 0.0,
-    "enabled": true,
-    "tooltip": "If relative locations, Easting is relative to the center of the survey."
-  },
-  "northing": {
-    "label": "Northing (m)",
-    "main": true,
-    "group": "Plate",
-    "value": 0.0,
-    "enabled": true,
-    "tooltip": "If relative locations, Northing is relative to the center of the survey."
-  },
-  "elevation": {
-    "label": "Elevation (m)",
-    "main": true,
-    "group": "Plate",
-    "value": 0.0,
-    "enabled": true,
-    "tooltip": "If relative location, Elevation is relative to the topography or overburden according to 'Depth reference' selection."
-  },
-  "reference_surface": {
-    "label": "Depth reference",
-    "main": true,
-    "group": "Plate",
-    "dependency": "relative_locations",
-    "dependencyType": "enabled",
-    "choiceList": ["topography", "overburden"],
-    "tooltop": "If relative locations, the depth will be below the min/mean/max (according to 'Reference type') of the reference surface chosen.",
-    "value": "overburden"
-  },
-  "reference_type": {
-    "label": "Reference type",
-    "main": true,
-    "group": "Plate",
-    "dependency": "relative_locations",
-    "dependencyType": "enabled",
-    "choiceList": ["min", "mean", "max"],
-    "tooltip": "If relative locations, the depth will be below the min/mean/max of the 'Depth reference' chosen.",
-    "value": "min"
-  },
-  "generate_sweep": {
-    "label": "Generate sweep file",
-    "main": true,
-    "value": false
-  },
-  "u_cell_size": {
-    "min": 0.0,
-    "group": "Mesh",
-    "label": "Easting core cell size (m)",
-    "value": 25.0,
-    "enabled": true
-  },
-  "v_cell_size": {
-    "min": 0.0,
-    "group": "Mesh",
-    "label": "Northing core cell size (m)",
-    "value": 25.0,
-    "enabled": true
-  },
-  "w_cell_size": {
-    "min": 0.0,
-    "group": "Mesh",
-    "label": "Vertical core cell size (m)",
-    "value": 25.0,
-    "enabled": true
-  },
-  "depth_core": {
-    "min": 0.0,
-    "group": "Mesh",
-    "label": "Depth of core refinement volume",
-    "value": 500.0,
-    "enabled": true
-  },
-  "max_distance": {
-    "min": 0.0,
-    "group": "Mesh",
-    "label": "Maximum padding distance",
-    "value": 200.0,
-    "enabled": true
-  },
-  "padding_distance": {
-    "min": 0.0,
-    "group": "Mesh",
-    "label": "Padding distance",
-    "value": 1000.0,
-    "enabled": true
-  },
-  "diagonal_balance": {
-      "group": "Mesh",
-      "label": "Diagonal Balance",
-      "main": false,
-      "value": true,
-      "tooltip": "Assure single octree level change on corner neighbours. UBC compatible mesh."
-  },
-  "minimum_level": {
-      "enabled": true,
-      "group": "Mesh",
-      "label": "Minimum refinement level.",
-      "main": false,
-      "min": 1,
-      "tooltip": "Minimum refinement in padding region: 2**(n-1) x base_cell.",
-      "value": 6
-  },
-  "export_model": {
-    "main": false,
-    "label": "Export mesh/model",
-    "value": true,
-    "enabled": true
-  },
-  "out_group": {
-    "label": "Simulation group",
-    "value": "",
-    "groupType": "{BB50AC61-A657-4926-9C82-067658E246A0}",
-    "visible": true,
-    "optional": true,
-    "enabled": false
-  }
+    "icon": "maxwellplate",
+    "version": "0.2.0-alpha.1",
+    "title": "Plate simulation",
+    "documentation": "https://mirageoscience-plate-simulation.readthedocs-hosted.com/",
+    "conda_environment": "plate_simulation",
+    "run_command": "plate_simulation.driver",
+    "geoh5": "",
+    "monitoring_directory": "",
+    "simulation": {
+        "main": true,
+        "label": "TEM SimPEG Group",
+        "groupType": "{55ed3daf-c192-4d4b-a439-60fa987fe2b8}",
+        "value": "",
+        "enabled": true,
+        "tooltip": "Forward modelling SimPEG group with at least the topogarphy and survey set"
+    },
+    "name": {
+        "main": true,
+        "label": "Label",
+        "value": "plate",
+        "enabled": true,
+        "tooltip": "Provide the name for the result group"
+    },
+    "background": {
+        "main": true,
+        "group": "Basement",
+        "label": "Physical property (SI)",
+        "value": 2000.0,
+        "tooltip": "Value of the basement resisitivity (ohm-m), density (g/cc) or susceptibility (SI)",
+        "enabled": true
+    },
+    "overburden": {
+        "main": true,
+        "group": "Overburden",
+        "label": "Physical property (SI)",
+        "value": 8000.0,
+        "tooltip": "Value of the overburden resisitivity (ohm-m), density (g/cc) or susceptibility (SI)",
+        "enabled": true
+    },
+    "thickness": {
+        "main": true,
+        "group": "Overburden",
+        "label": "Thickness",
+        "value": 200.0,
+        "enabled": true,
+        "tooltip": "Thickness of the overburden"
+    },
+    "number": {
+        "main": true,
+        "group": "Plate",
+        "label": "Number of plates",
+        "value": 1,
+        "enabled": true,
+        "tooltip": "If more than one the plates will be parallel, equally spaced over the center of the model"
+    },
+    "spacing": {
+        "main": true,
+        "group": "Plate",
+        "label": "Spacing (m)",
+        "value": 0.0,
+        "enabled": true,
+        "tooltip": "Spacing between plates"
+    },
+    "plate": {
+        "main": true,
+        "group": "Plate",
+        "label": "Physical property (SI)",
+        "value": 20.0,
+        "tooltip": "Value of the plate resisitivity (ohm-m), density (g/cc) or susceptibility (SI)",
+        "enabled": true
+    },
+    "width": {
+        "label": "Thickness",
+        "group": "Plate",
+        "main": true,
+        "value": 90.0,
+        "enabled": true,
+        "tooltip": "Thickness of the plate"
+    },
+    "strike_length": {
+        "label": "Strike length",
+        "group": "Plate",
+        "main": true,
+        "value": 800.0,
+        "enabled": true,
+        "tooltip": "Length of the plate along the strike direction"
+    },
+    "dip_length": {
+        "label": "Dip length",
+        "group": "Plate",
+        "main": true,
+        "value": 800.0,
+        "enabled": true,
+        "tooltip": "Length of the plate along the dip direction"
+    },
+    "dip": {
+        "label": "Dip",
+        "group": "Plate",
+        "main": true,
+        "value": 60.0,
+        "enabled": true,
+        "min": 0.0,
+        "max": 90.0,
+        "tooltip": "Dip of the plate in degrees from horizontal"
+    },
+    "dip_direction": {
+        "label": "Dip direction",
+        "group": "Plate",
+        "main": true,
+        "value": 90.0,
+        "enabled": true,
+        "min": 0.0,
+        "max": 360.0,
+        "tooltip": "Direction of the dip vector in degrees from North"
+    },
+    "relative_locations": {
+        "label": "Relative locations",
+        "main": true,
+        "group": "Plate",
+        "value": true,
+        "enabled": true,
+        "tooltip": "If checked locations are relative to the survey center and either topography or overburden in z according to 'Depth reference' selection"
+    },
+    "easting": {
+        "label": "Easting (m)",
+        "group": "Plate",
+        "main": true,
+        "value": 0.0,
+        "enabled": true,
+        "tooltip": "If relative locations, Easting is relative to the center of the survey"
+    },
+    "northing": {
+        "label": "Northing (m)",
+        "main": true,
+        "group": "Plate",
+        "value": 0.0,
+        "enabled": true,
+        "tooltip": "If relative locations, Northing is relative to the center of the survey"
+    },
+    "elevation": {
+        "label": "Elevation (m)",
+        "main": true,
+        "group": "Plate",
+        "value": 0.0,
+        "enabled": true,
+        "tooltip": "If relative location, Elevation is relative to the topography or overburden according to 'Depth reference' selection"
+    },
+    "reference_surface": {
+        "label": "Depth reference",
+        "main": true,
+        "group": "Plate",
+        "dependency": "relative_locations",
+        "dependencyType": "enabled",
+        "choiceList": [
+            "topography",
+            "overburden"
+        ],
+        "tooltop": "If relative locations, the depth will be below the min/mean/max (according to 'Reference type') of the reference surface chosen.",
+        "value": "overburden"
+    },
+    "reference_type": {
+        "label": "Reference type",
+        "main": true,
+        "group": "Plate",
+        "dependency": "relative_locations",
+        "dependencyType": "enabled",
+        "choiceList": [
+            "min",
+            "mean",
+            "max"
+        ],
+        "tooltip": "If relative locations, the depth will be below the min/mean/max of the 'Depth reference' chosen",
+        "value": "min"
+    },
+    "generate_sweep": {
+        "label": "Generate sweep file",
+        "main": true,
+        "value": false
+    },
+    "u_cell_size": {
+        "min": 0.0,
+        "group": "Mesh",
+        "label": "Easting core cell size (m)",
+        "value": 25.0,
+        "enabled": true
+    },
+    "v_cell_size": {
+        "min": 0.0,
+        "group": "Mesh",
+        "label": "Northing core cell size (m)",
+        "value": 25.0,
+        "enabled": true
+    },
+    "w_cell_size": {
+        "min": 0.0,
+        "group": "Mesh",
+        "label": "Vertical core cell size (m)",
+        "value": 25.0,
+        "enabled": true
+    },
+    "depth_core": {
+        "min": 0.0,
+        "group": "Mesh",
+        "label": "Depth of core refinement volume",
+        "value": 500.0,
+        "enabled": true
+    },
+    "max_distance": {
+        "min": 0.0,
+        "group": "Mesh",
+        "label": "Maximum padding distance",
+        "value": 200.0,
+        "enabled": true
+    },
+    "padding_distance": {
+        "min": 0.0,
+        "group": "Mesh",
+        "label": "Padding distance",
+        "value": 1000.0,
+        "enabled": true
+    },
+    "diagonal_balance": {
+        "group": "Mesh",
+        "label": "Diagonal balance",
+        "main": false,
+        "value": true,
+        "tooltip": "Assure single octree level change on corner neighbours. UBC compatible mesh"
+    },
+    "minimum_level": {
+        "enabled": true,
+        "group": "Mesh",
+        "label": "Minimum refinement level",
+        "main": false,
+        "min": 1,
+        "tooltip": "Minimum refinement in padding region: 2**(n-1) x base_cell",
+        "value": 6
+    },
+    "export_model": {
+        "main": false,
+        "label": "Export mesh/model",
+        "value": true,
+        "enabled": true
+    },
+    "out_group": {
+        "label": "Simulation group",
+        "value": "",
+        "groupType": "{BB50AC61-A657-4926-9C82-067658E246A0}",
+        "visible": true,
+        "optional": true,
+        "enabled": false
+    }
 }

From e40a794c3b3f9a2d09854e0d1c9cc09582b0be78 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?S=C3=A9bastien=20Hensgen?= <sebastienh@mirageoscience.com>
Date: Wed, 30 Apr 2025 17:53:23 -0400
Subject: [PATCH 2/2] Update
 plate_simulation-assets/uijson/plate_simulation.ui.json

---
 plate_simulation-assets/uijson/plate_simulation.ui.json | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/plate_simulation-assets/uijson/plate_simulation.ui.json b/plate_simulation-assets/uijson/plate_simulation.ui.json
index 773b8d2..e28c381 100644
--- a/plate_simulation-assets/uijson/plate_simulation.ui.json
+++ b/plate_simulation-assets/uijson/plate_simulation.ui.json
@@ -2,7 +2,7 @@
     "icon": "maxwellplate",
     "version": "0.2.0-alpha.1",
     "title": "Plate simulation",
-    "documentation": "https://mirageoscience-plate-simulation.readthedocs-hosted.com/",
+    "documentation": "https://mirageoscience-plate-simulation.readthedocs-hosted.com/en/latest/",
     "conda_environment": "plate_simulation",
     "run_command": "plate_simulation.driver",
     "geoh5": "",