No module named "dateparser"

[RT3K]

Im getting this error when starting main.py. I did no changes to the files.

[Shaun-Harrison]

Did you follow the instructions here first?

All instructions there are required to be ran first

Looks to me though like a python package is missing - something along the lines of pip3 install dataparser or pip install dataparser depending on what version of pip you have installed

[RT3K]

I did the instructions up to the point where i have to git the file. I took yours .

[RT3K]

Other question. Can i add chia coin to the list ? And how do i do that ?

[Shaun-Harrison]

As long as the coin is in this list - https://api.coingecko.com/api/v3/coins/list you can add it in!

For adding you'll need too

• Open main.py
• Add the coin ID into the list on line 21
• Add a new elif statement in line 34 for the new coin
• If the value of the coin is less than $1 then you may need to open data\plot.py and add a new if statement in line 46

Can't think of anything else off the top of my head, let me know how you get on

[RT3K]

I get the same error no module named dateparser. When i remove the module out of main.py then i get the error no module named pytz.
I reinstalled pip3 and pandas and the system says me that i have these modules installed but they doesnt work in main.py

[Shaun-Harrison]

What command are you using to run the script?

Trying to think of what could be the issue if the modules are installed

[Shaun-Harrison]

Here is the list of packages I have installed

NOTE: There are two versions of dataparser - maybe this is the issue?

Package            Version
------------------ ---------
asn1crypto         0.24.0
attrs              19.3.0
bcrypt             3.1.7
cached-property    1.5.1
certifi            2018.8.24
cffi               1.14.0
chardet            3.0.4
cryptography       2.6.1
dataparser         0.0.2
dateparser         1.0.0
docker             4.2.0
docker-compose     1.25.4
dockerpty          0.4.1
docopt             0.6.2
entrypoints        0.3
fail2ban           0.10.2
idna               2.6
importlib-metadata 1.5.0
inky               1.2.0
jsonschema         3.2.0
keyring            17.1.1
keyrings.alt       3.1.1
numpy              1.16.2
olefile            0.46
paho-mqtt          1.5.0
paramiko           2.7.1
Pillow             5.4.1
pip                18.1
psutil             5.6.3
pycparser          2.20
pycrypto           2.6.1
PyGObject          3.30.4
pyinotify          0.9.6
PyNaCl             1.3.0
pyrsistent         0.15.7
python-apt         1.8.4.3
python-dateutil    2.8.1
pytz               2019.2
pyxdg              0.25
PyYAML             5.2
regex              2021.4.4
requests           2.21.0
RPi.GPIO           0.7.0
SecretStorage      2.3.1
setuptools         40.8.0
six                1.12.0
smbus2             0.4.1
spidev             3.5
ssh-import-id      5.7
systemd-python     234
texttable          1.6.2
tzlocal            2.1
urllib3            1.24.1
waveshare-epd      0.0.0
websocket-client   0.57.0
wheel              0.32.3
zipp               3.1.0

[Mathostx]

As long as the coin is in this list - https://api.coingecko.com/api/v3/coins/list you can add it in!

For adding you'll need too

• Open main.py
• Add the coin ID into the list on line 21
• Add a new elif statement in line 34 for the new coin
• If the value of the coin is less than $1 then you may need to open data\plot.py and add a new if statement in line 46

Can't think of anything else off the top of my head, let me know how you get on

So after installing the original version we just substitute main and change some lines, correct?

[Mathostx]

Any ideas why this is happening? Installed and worked (the original BTC ticker)
Then I just substituted the original main.py with yours.

Traceback (most recent call last): File "/home/pi/zero-btc-screen/main.py", line 99, in main() File "/home/pi/zero-btc-screen/main.py", line 88, in main data_sink.update_observers(prices) File "/home/pi/zero-btc-screen/presentation/observer.py", line 18, in update_observers observer.update(data) File "/home/pi/zero-btc-screen/presentation/screens/epd2in13v2.py", line 54, in update self.form_image(data, self.screen_draw) File "/home/pi/zero-btc-screen/presentation/screens/epd2in13v2.py", line 41, in form_image Plot.candle(prices, size=(SCREEN_WIDTH - 45, 93), position=(41, 0), draw=screen_draw) File "/home/pi/zero-btc-screen/data/plot.py", line 63, in candle open = window[0][0] TypeError: 'float' object is not subscriptable

[Shaun-Harrison]

Any ideas why this is happening? Installed and worked (the original BTC ticker) Then I just substituted the original main.py with yours.

Traceback (most recent call last): File "/home/pi/zero-btc-screen/main.py", line 99, in main() File "/home/pi/zero-btc-screen/main.py", line 88, in main data_sink.update_observers(prices) File "/home/pi/zero-btc-screen/presentation/observer.py", line 18, in update_observers observer.update(data) File "/home/pi/zero-btc-screen/presentation/screens/epd2in13v2.py", line 54, in update self.form_image(data, self.screen_draw) File "/home/pi/zero-btc-screen/presentation/screens/epd2in13v2.py", line 41, in form_image Plot.candle(prices, size=(SCREEN_WIDTH - 45, 93), position=(41, 0), draw=screen_draw) File "/home/pi/zero-btc-screen/data/plot.py", line 63, in candle open = window[0][0] TypeError: 'float' object is not subscriptable

Hello, I have made changes in other areas not just main.py

You need the whole of this repo cloned

[SteefW95]

Any ideas why this is happening? Installed and worked (the original BTC ticker) Then I just substituted the original main.py with yours.

Traceback (most recent call last): File "/home/pi/zero-btc-screen/main.py", line 99, in main() File "/home/pi/zero-btc-screen/main.py", line 88, in main data_sink.update_observers(prices) File "/home/pi/zero-btc-screen/presentation/observer.py", line 18, in update_observers observer.update(data) File "/home/pi/zero-btc-screen/presentation/screens/epd2in13v2.py", line 54, in update self.form_image(data, self.screen_draw) File "/home/pi/zero-btc-screen/presentation/screens/epd2in13v2.py", line 41, in form_image Plot.candle(prices, size=(SCREEN_WIDTH - 45, 93), position=(41, 0), draw=screen_draw) File "/home/pi/zero-btc-screen/data/plot.py", line 63, in candle open = window[0][0] TypeError: 'float' object is not subscriptable

Did you find a solution? Because I have the same problem. But I cloned the whole repo of Shaun and override it over the files of dr-mod

[devjstr]

I had the same problem with datepraser, so i commend it out on configuration.cfg. But then the problems with epd2in13v3 kicks in. The epd2in13bv3 screen just works fine but on the epd2in13v3 screen this problem appears:

pi@pi:~ $ python3 ~/zero-btc-screen/main.py
module 'presentation.screens' has no attribute 'epd2in13v3'
Traceback (most recent call last):
File "/home/pijan/zero-btc-screen/config/builder.py", line 16, in bind
package = getattr(screens, screen.lower())
AttributeError: module 'presentation.screens' has no attribute 'epd2in13v3'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "/home/pijan/zero-btc-screen/main.py", line 99, in
main()
File "/home/pijan/zero-btc-screen/main.py", line 81, in main
builder.bind(data_sink)
File "/home/pijan/zero-btc-screen/config/builder.py", line 27, in bind
raise BtcConfigError(
config.builder.BtcConfigError: Cannot instantiate epd2in13v3

EDIT: I looked into the folder (/cryptoTickerGraph-main\presentation\screens) and there is no file for the edp2in13v3 screen. Only for edp2in13v2 and edp2in13bv3, so it will not work, whatever i do :(((

[Shaun-Harrison]

For those with the original issue of No module named "dateparser"

I've figured this out while re installing this repo

You need to run

pip install dateparser

pip3 install a dateparser, but not the 'right' one, which I don't know why, but i had to uninstall pip3 dataparser, and only have pip dateparser

I had the dataparser error and using the install command fixed that but I still get this error when I try to run it.
Original Zero BTC screen works fine

[Shaun-Harrison]

You just need to create a folder in /var/log called python

It may need the file called cryptoGraph.txt but that should get created