Boot guard disabled on a hasswell laptop 👀 The intelmetool shows the bootguard status "off" on the hasswell HP laptop. Is there another way to double check the bootguatd status.

[creepreee]

Hi dev. I was going to modify the uefi image of my laptop. And for cleaning intel ME related stuff, look what i have got the output of this tool.

danish@danish:~/coreboot/util/intelmetool$ sudo ./intelmetool -b
Bad news, you have a HM87 Express LPC Controller so you have ME hardware on board and you can't control or disable it, continuing...

MEI found: [8086:8c3a] 8 Series/C220 Series Chipset Family MEI Controller #1

ME Status : 0x1e000245
ME Status 2 : 0x66002306

ME: FW Partition Table : OK
ME: Bringup Loader Failure : NO
ME: Firmware Init Complete : YES
ME: Manufacturing Mode : NO
ME: Boot Options Present : NO
ME: Update In Progress : NO
ME: Current Working State : Normal
ME: Current Operation State : M0 with UMA
ME: Current Operation Mode : Normal
ME: Error Code : No Error
ME: Progress Phase : Host Communication
ME: Power Management Event : Pseudo-global reset
ME: Progress Phase State : Host communication established

ME: Extend SHA-256: f4303de02daefbff2bd5bad5988960f657c8c5465c150c568d95ecfbc3389e2f

ME: Firmware Version 9.0.1345.2 (code) 9.0.1345.2 (recovery) 9.0.1345.2 (fitc)

ME Capability: Full Network manageability : OFF
ME Capability: Regular Network manageability : OFF
ME Capability: Manageability : OFF
ME Capability: Small business technology : OFF
ME Capability: Level III manageability : OFF
ME Capability: IntelR Anti-Theft (AT) : ON
ME Capability: IntelR Capability Licensing Service (CLS) : ON
ME Capability: IntelR Power Sharing Technology (MPC) : OFF
ME Capability: ICC Over Clocking : ON
ME Capability: Protected Audio Video Path (PAVP) : ON
ME Capability: IPV6 : OFF
ME Capability: KVM Remote Control (KVM) : OFF
ME Capability: Outbreak Containment Heuristic (OCH) : OFF
ME Capability: Virtual LAN (VLAN) : ON
ME Capability: TLS : OFF
ME Capability: Wireless LAN (WLAN) : OFF
Bad news, you have a HM87 Express LPC Controller so you have ME hardware on board and you can't control or disable it, continuing...

Your system isn't Boot Guard ready.
You can flash other firmware!
danish@danish:~/coreboot/util/intelmetool$

"Your system isn't Boot Guard ready.
You can flash other firmware!"

I wondler somethings suspicious. Specs of laptop:

Hp envy leap motion 17 se nb laptop
Intel core i7 4th gen
16 gb ddr4 ram
Insydeh20 rev f70 uefi

It is unbelievable the output is shown this. Can you tell me any otber method by which i can see the status of bootguard?