Base Dashboard layout for first release

[sebailfico]

Create a dashboard with few essential informations about the status of the system and it's components (miners, batteries, energy sources etc).

@riccardoaran will provide some UI and UX guidances.

[riccardoaran]

Overview

This issue defines the minimal set of components and data to display on the Dashboard for the v0.1.0 release. The goal is to keep the interface focused and functional, showing only essential real-time and forecast information.

IMPORTANT:
For this first release, the base use case assumes a single photovoltaic system (any other energy source type is out of scope for now, as solar PV covers ~99% of current use cases) and one or more miners.

---

Cards

Solar Forecast Card

Displays solar energy production forecast data:

• Today – total expected production for the current day
• Remaining today – estimated production left for the rest of the day
• Tomorrow – total expected production for the next day

---

Miner Card

Each miner configured in the system generates its own dedicated card. Each card displays:

• Status – ON / OFF
• Real-time power consumption (Live reading from the smart plug is more accurate)

---

Solar Plant Card

Displays the current state of the photovoltaic system:

• Battery level – current state of charge (%)
• Instantaneous production – current power output from the PV system
• Instantaneous load – current total power consumption

---

Charts

All charts are displayed within a single unified card. The three data series are overlaid on the same time axis (last 24 hours), each with a distinct color. A toggle filter allows showing or hiding each series independently:

• Battery – state of charge over 24h
• Solar production – PV output over 24h
• Loads – power consumption over 24h

Each series can be toggled on/off via a filter control, so the user can compare any combination of the three at a glance.

[markoceri]

This is the actual dashboard that provides a comprehensive real-time view of mining operations and energy management. Below is a breakdown of every section.

---

🔢 KPI Strip (top bar)

Key performance indicators updated in real time:

KPI	Description
Total Hash Rate	Aggregate hash rate across all active miners (TH/s / PH/s)
Power Draw	Total miner power consumption + home consumption (sub-value "Home")
Energy Production	Current energy production (e.g. solar PV)
Battery	Battery state of charge (SOC %)
Grid	Power exchanged with the grid, labeled "importing" or "exporting"
Miners	Running / active / total configured miners count
Optimization Units	Enabled optimization units out of total

---

⛏️ MINING Section (main column)

Three real-time charts for miner monitoring:

• Hash Rate — Time-series of the aggregate hash rate, with miner on/off event overlay.
• Power Consumption — Miner power draw over time, with miner on/off event overlay.
• Temperature & Fan — Combined chart with four series:
  • Chip Temperature (max)
  • Board Temperature (max)
  • Internal Fan Speed (RPM)
  • External Fan Speed (RPM)

Each panel supports fullscreen expansion and miner-event marker toggle.

---

⚡ ENERGY Section (main column)

Four real-time charts for energy balance:

• Home Consumption — Total household consumption over time.
• Energy Production — Solar/renewable production over time.
• Battery — Dual-series chart: SOC % (state of charge) and Power (charge/discharge rate).
• Grid Power — Power imported from / exported to the grid over time.

All charts support miner on/off event overlay to correlate energy variations with mining activity.

---

🔮 FORECAST Section (main column)

• Energy Forecast — Bar + line chart showing predicted energy (Wh) and max power (W) per hourly interval.
• Forecast Summary — Summary card with:
  • Energy: predicted production for Today / Remaining today / Tomorrow (kWh)
  • Power: average power today / average power tomorrow / peak power (kW)

---

🖥️ MINER FLEET Section (sidebar)

A tile grid for each configured miner, showing:

• Name and status (on/off)
• Current hash rate
• Power consumption

If no miners are configured, a direct link to Settings > Miners is displayed.

---

☀️ SUN Section (sidebar)

Card with astronomical data:

• Visual sun position indicator along the daily arc
• Current state: Daytime / Nighttime
• Sunrise and sunset times
• Time elapsed / remaining relative to sunrise/sunset
• Daylight hours
• Current solar elevation (degrees)

---

📋 ACTIVITY Section (sidebar)

Chronological feed of system events (e.g. "MinerPyAsic started"), with scroll to browse recent history.

---

🛡️ LAST POLICY RULE Section (sidebar)

Displays the last policy rule triggered by the rule engine based on energy conditions.
If no rule has been triggered yet, an informational placeholder is shown.

---

⏻ MINER ON/OFF EVENTS Section (sidebar)

Chronological list (last 20) of miner power-on/power-off events, showing:

• Timestamp
• Miner name
• Action (ON / OFF) with green/red color coding

---

I think this dashboard could be quite comprehensive for its first release, providing a view of most of the data available in the system. So, it goes well beyond the "few essential information." 😄 .

What do you think? Do you like it? Should anything be added or removed?
Let me know.