+ extern uint32_t SystemCoreClock;
+#endif
+
+#define configUSE_PREEMPTION 1
+#define configUSE_IDLE_HOOK 0
+#define configUSE_TICK_HOOK 0
+#define configCPU_CLOCK_HZ (SystemCoreClock)
+#define configTICK_RATE_HZ ((TickType_t)1000)
+#define configMAX_PRIORITIES (7)
+#define configMINIMAL_STACK_SIZE ((uint16_t)128)
+#define configTOTAL_HEAP_SIZE ((size_t)(15 * 1024))
+#define configMAX_TASK_NAME_LEN (16)
+#define configUSE_TRACE_FACILITY 1
+#define configUSE_16_BIT_TICKS 0
+#define configIDLE_SHOULD_YIELD 1
+#define configUSE_MUTEXES 1
+#define configQUEUE_REGISTRY_SIZE 8
+#define configCHECK_FOR_STACK_OVERFLOW 0
+#define configUSE_RECURSIVE_MUTEXES 1
+#define configUSE_MALLOC_FAILED_HOOK 0
+#define configUSE_APPLICATION_TASK_TAG 0
+#define configUSE_COUNTING_SEMAPHORES 1
+#define configGENERATE_RUN_TIME_STATS 0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES 0
+#define configMAX_CO_ROUTINE_PRIORITIES (2)
+
+/* Software timer definitions. */
+#define configUSE_TIMERS 0
+#define configTIMER_TASK_PRIORITY (2)
+#define configTIMER_QUEUE_LENGTH 10
+#define configTIMER_TASK_STACK_DEPTH (configMINIMAL_STACK_SIZE * 2)
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+#define INCLUDE_vTaskPrioritySet 1
+#define INCLUDE_uxTaskPriorityGet 1
+#define INCLUDE_vTaskDelete 1
+#define INCLUDE_vTaskCleanUpResources 0
+#define INCLUDE_vTaskSuspend 1
+#define INCLUDE_vTaskDelayUntil 0
+#define INCLUDE_vTaskDelay 1
+#define INCLUDE_xTaskGetSchedulerState 1
+
+/* Cortex-M specific definitions. */
+#ifdef __NVIC_PRIO_BITS
+ /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
+ #define configPRIO_BITS __NVIC_PRIO_BITS
+#else
+ #define configPRIO_BITS 4 /* 15 priority levels */
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority"
+function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 0xf
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
+
+/* Interrupt priorities used by the kernel port layer itself. These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* Normal assert() semantics without relying on the provision of an assert.h
+header file. */
+#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); }
+
+/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
+ standard names. */
+#define vPortSVCHandler SVC_Handler
+#define xPortPendSVHandler PendSV_Handler
+
+/* IMPORTANT: This define MUST be commented when used with STM32Cube firmware,
+ to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
+/* #define xPortSysTickHandler SysTick_Handler */
+
+#endif /* FREERTOS_CONFIG_H */
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h
new file mode 100644
index 0000000..13c6b82
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h
@@ -0,0 +1,171 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+#ifndef STACK_MACROS_H
+#define STACK_MACROS_H
+
+/*
+ * Call the stack overflow hook function if the stack of the task being swapped
+ * out is currently overflowed, or looks like it might have overflowed in the
+ * past.
+ *
+ * Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check
+ * the current stack state only - comparing the current top of stack value to
+ * the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1
+ * will also cause the last few stack bytes to be checked to ensure the value
+ * to which the bytes were set when the task was created have not been
+ * overwritten. Note this second test does not guarantee that an overflowed
+ * stack will always be recognised.
+ */
+
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) )
+
+ /* Only the current stack state is to be checked. */
+ #define taskCHECK_FOR_STACK_OVERFLOW() \
+ { \
+ /* Is the currently saved stack pointer within the stack limit? */ \
+ if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \
+ { \
+ vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
+ } \
+ }
+
+#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) )
+
+ /* Only the current stack state is to be checked. */
+ #define taskCHECK_FOR_STACK_OVERFLOW() \
+ { \
+ \
+ /* Is the currently saved stack pointer within the stack limit? */ \
+ if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \
+ { \
+ vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
+ } \
+ }
+
+#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )
+
+ #define taskCHECK_FOR_STACK_OVERFLOW() \
+ { \
+ const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack; \
+ const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5; \
+ \
+ if( ( pulStack[ 0 ] != ulCheckValue ) || \
+ ( pulStack[ 1 ] != ulCheckValue ) || \
+ ( pulStack[ 2 ] != ulCheckValue ) || \
+ ( pulStack[ 3 ] != ulCheckValue ) ) \
+ { \
+ vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
+ } \
+ }
+
+#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )
+
+ #define taskCHECK_FOR_STACK_OVERFLOW() \
+ { \
+ int8_t *pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack; \
+ static const uint8_t ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \
+ \
+ \
+ pcEndOfStack -= sizeof( ucExpectedStackBytes ); \
+ \
+ /* Has the extremity of the task stack ever been written over? */ \
+ if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \
+ { \
+ vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
+ } \
+ }
+
+#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
+/*-----------------------------------------------------------*/
+
+/* Remove stack overflow macro if not being used. */
+#ifndef taskCHECK_FOR_STACK_OVERFLOW
+ #define taskCHECK_FOR_STACK_OVERFLOW()
+#endif
+
+
+
+#endif /* STACK_MACROS_H */
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h
new file mode 100644
index 0000000..4f003a0
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h
@@ -0,0 +1,762 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+#ifndef CO_ROUTINE_H
+#define CO_ROUTINE_H
+
+#ifndef INC_FREERTOS_H
+ #error "include FreeRTOS.h must appear in source files before include croutine.h"
+#endif
+
+#include "list.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Used to hide the implementation of the co-routine control block. The
+control block structure however has to be included in the header due to
+the macro implementation of the co-routine functionality. */
+typedef void * CoRoutineHandle_t;
+
+/* Defines the prototype to which co-routine functions must conform. */
+typedef void (*crCOROUTINE_CODE)( CoRoutineHandle_t, UBaseType_t );
+
+typedef struct corCoRoutineControlBlock
+{
+ crCOROUTINE_CODE pxCoRoutineFunction;
+ ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */
+ ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */
+ UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */
+ UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
+ uint16_t uxState; /*< Used internally by the co-routine implementation. */
+} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */
+
+/**
+ * croutine. h
+ *
+ BaseType_t xCoRoutineCreate(
+ crCOROUTINE_CODE pxCoRoutineCode,
+ UBaseType_t uxPriority,
+ UBaseType_t uxIndex
+ );
+ *
+ * Create a new co-routine and add it to the list of co-routines that are
+ * ready to run.
+ *
+ * @param pxCoRoutineCode Pointer to the co-routine function. Co-routine
+ * functions require special syntax - see the co-routine section of the WEB
+ * documentation for more information.
+ *
+ * @param uxPriority The priority with respect to other co-routines at which
+ * the co-routine will run.
+ *
+ * @param uxIndex Used to distinguish between different co-routines that
+ * execute the same function. See the example below and the co-routine section
+ * of the WEB documentation for further information.
+ *
+ * @return pdPASS if the co-routine was successfully created and added to a ready
+ * list, otherwise an error code defined with ProjDefs.h.
+ *
+ * Example usage:
+
+ // Co-routine to be created.
+ void vFlashCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ // This may not be necessary for const variables.
+ static const char cLedToFlash[ 2 ] = { 5, 6 };
+ static const TickType_t uxFlashRates[ 2 ] = { 200, 400 };
+
+ // Must start every co-routine with a call to crSTART();
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // This co-routine just delays for a fixed period, then toggles
+ // an LED. Two co-routines are created using this function, so
+ // the uxIndex parameter is used to tell the co-routine which
+ // LED to flash and how int32_t to delay. This assumes xQueue has
+ // already been created.
+ vParTestToggleLED( cLedToFlash[ uxIndex ] );
+ crDELAY( xHandle, uxFlashRates[ uxIndex ] );
+ }
+
+ // Must end every co-routine with a call to crEND();
+ crEND();
+ }
+
+ // Function that creates two co-routines.
+ void vOtherFunction( void )
+ {
+ uint8_t ucParameterToPass;
+ TaskHandle_t xHandle;
+
+ // Create two co-routines at priority 0. The first is given index 0
+ // so (from the code above) toggles LED 5 every 200 ticks. The second
+ // is given index 1 so toggles LED 6 every 400 ticks.
+ for( uxIndex = 0; uxIndex < 2; uxIndex++ )
+ {
+ xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
+ }
+ }
+
+ * \defgroup xCoRoutineCreate xCoRoutineCreate
+ * \ingroup Tasks
+ */
+BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex );
+
+
+/**
+ * croutine. h
+ *
+ void vCoRoutineSchedule( void );
+ *
+ * Run a co-routine.
+ *
+ * vCoRoutineSchedule() executes the highest priority co-routine that is able
+ * to run. The co-routine will execute until it either blocks, yields or is
+ * preempted by a task. Co-routines execute cooperatively so one
+ * co-routine cannot be preempted by another, but can be preempted by a task.
+ *
+ * If an application comprises of both tasks and co-routines then
+ * vCoRoutineSchedule should be called from the idle task (in an idle task
+ * hook).
+ *
+ * Example usage:
+
+ // This idle task hook will schedule a co-routine each time it is called.
+ // The rest of the idle task will execute between co-routine calls.
+ void vApplicationIdleHook( void )
+ {
+ vCoRoutineSchedule();
+ }
+
+ // Alternatively, if you do not require any other part of the idle task to
+ // execute, the idle task hook can call vCoRoutineScheduler() within an
+ // infinite loop.
+ void vApplicationIdleHook( void )
+ {
+ for( ;; )
+ {
+ vCoRoutineSchedule();
+ }
+ }
+
+ * \defgroup vCoRoutineSchedule vCoRoutineSchedule
+ * \ingroup Tasks
+ */
+void vCoRoutineSchedule( void );
+
+/**
+ * croutine. h
+ *
+ crSTART( CoRoutineHandle_t xHandle );
+ *
+ * This macro MUST always be called at the start of a co-routine function.
+ *
+ * Example usage:
+
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static int32_t ulAVariable;
+
+ // Must start every co-routine with a call to crSTART();
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Co-routine functionality goes here.
+ }
+
+ // Must end every co-routine with a call to crEND();
+ crEND();
+ }
+ * \defgroup crSTART crSTART
+ * \ingroup Tasks
+ */
+#define crSTART( pxCRCB ) switch( ( ( CRCB_t * )( pxCRCB ) )->uxState ) { case 0:
+
+/**
+ * croutine. h
+ *
+ crEND();
+ *
+ * This macro MUST always be called at the end of a co-routine function.
+ *
+ * Example usage:
+
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static int32_t ulAVariable;
+
+ // Must start every co-routine with a call to crSTART();
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Co-routine functionality goes here.
+ }
+
+ // Must end every co-routine with a call to crEND();
+ crEND();
+ }
+ * \defgroup crSTART crSTART
+ * \ingroup Tasks
+ */
+#define crEND() }
+
+/*
+ * These macros are intended for internal use by the co-routine implementation
+ * only. The macros should not be used directly by application writers.
+ */
+#define crSET_STATE0( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = (__LINE__ * 2); return; case (__LINE__ * 2):
+#define crSET_STATE1( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = ((__LINE__ * 2)+1); return; case ((__LINE__ * 2)+1):
+
+/**
+ * croutine. h
+ *
+ crDELAY( CoRoutineHandle_t xHandle, TickType_t xTicksToDelay );
+ *
+ * Delay a co-routine for a fixed period of time.
+ *
+ * crDELAY can only be called from the co-routine function itself - not
+ * from within a function called by the co-routine function. This is because
+ * co-routines do not maintain their own stack.
+ *
+ * @param xHandle The handle of the co-routine to delay. This is the xHandle
+ * parameter of the co-routine function.
+ *
+ * @param xTickToDelay The number of ticks that the co-routine should delay
+ * for. The actual amount of time this equates to is defined by
+ * configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_PERIOD_MS
+ * can be used to convert ticks to milliseconds.
+ *
+ * Example usage:
+
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ // This may not be necessary for const variables.
+ // We are to delay for 200ms.
+ static const xTickType xDelayTime = 200 / portTICK_PERIOD_MS;
+
+ // Must start every co-routine with a call to crSTART();
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Delay for 200ms.
+ crDELAY( xHandle, xDelayTime );
+
+ // Do something here.
+ }
+
+ // Must end every co-routine with a call to crEND();
+ crEND();
+ }
+ * \defgroup crDELAY crDELAY
+ * \ingroup Tasks
+ */
+#define crDELAY( xHandle, xTicksToDelay ) \
+ if( ( xTicksToDelay ) > 0 ) \
+ { \
+ vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \
+ } \
+ crSET_STATE0( ( xHandle ) );
+
+/**
+ *
+ crQUEUE_SEND(
+ CoRoutineHandle_t xHandle,
+ QueueHandle_t pxQueue,
+ void *pvItemToQueue,
+ TickType_t xTicksToWait,
+ BaseType_t *pxResult
+ )
+ *
+ * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
+ * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
+ *
+ * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
+ * xQueueSend() and xQueueReceive() can only be used from tasks.
+ *
+ * crQUEUE_SEND can only be called from the co-routine function itself - not
+ * from within a function called by the co-routine function. This is because
+ * co-routines do not maintain their own stack.
+ *
+ * See the co-routine section of the WEB documentation for information on
+ * passing data between tasks and co-routines and between ISR's and
+ * co-routines.
+ *
+ * @param xHandle The handle of the calling co-routine. This is the xHandle
+ * parameter of the co-routine function.
+ *
+ * @param pxQueue The handle of the queue on which the data will be posted.
+ * The handle is obtained as the return value when the queue is created using
+ * the xQueueCreate() API function.
+ *
+ * @param pvItemToQueue A pointer to the data being posted onto the queue.
+ * The number of bytes of each queued item is specified when the queue is
+ * created. This number of bytes is copied from pvItemToQueue into the queue
+ * itself.
+ *
+ * @param xTickToDelay The number of ticks that the co-routine should block
+ * to wait for space to become available on the queue, should space not be
+ * available immediately. The actual amount of time this equates to is defined
+ * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
+ * portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see example
+ * below).
+ *
+ * @param pxResult The variable pointed to by pxResult will be set to pdPASS if
+ * data was successfully posted onto the queue, otherwise it will be set to an
+ * error defined within ProjDefs.h.
+ *
+ * Example usage:
+
+ // Co-routine function that blocks for a fixed period then posts a number onto
+ // a queue.
+ static void prvCoRoutineFlashTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static BaseType_t xNumberToPost = 0;
+ static BaseType_t xResult;
+
+ // Co-routines must begin with a call to crSTART().
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // This assumes the queue has already been created.
+ crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
+
+ if( xResult != pdPASS )
+ {
+ // The message was not posted!
+ }
+
+ // Increment the number to be posted onto the queue.
+ xNumberToPost++;
+
+ // Delay for 100 ticks.
+ crDELAY( xHandle, 100 );
+ }
+
+ // Co-routines must end with a call to crEND().
+ crEND();
+ }
+ * \defgroup crQUEUE_SEND crQUEUE_SEND
+ * \ingroup Tasks
+ */
+#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
+{ \
+ *( pxResult ) = xQueueCRSend( ( pxQueue) , ( pvItemToQueue) , ( xTicksToWait ) ); \
+ if( *( pxResult ) == errQUEUE_BLOCKED ) \
+ { \
+ crSET_STATE0( ( xHandle ) ); \
+ *pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \
+ } \
+ if( *pxResult == errQUEUE_YIELD ) \
+ { \
+ crSET_STATE1( ( xHandle ) ); \
+ *pxResult = pdPASS; \
+ } \
+}
+
+/**
+ * croutine. h
+ *
+ crQUEUE_RECEIVE(
+ CoRoutineHandle_t xHandle,
+ QueueHandle_t pxQueue,
+ void *pvBuffer,
+ TickType_t xTicksToWait,
+ BaseType_t *pxResult
+ )
+ *
+ * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
+ * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
+ *
+ * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
+ * xQueueSend() and xQueueReceive() can only be used from tasks.
+ *
+ * crQUEUE_RECEIVE can only be called from the co-routine function itself - not
+ * from within a function called by the co-routine function. This is because
+ * co-routines do not maintain their own stack.
+ *
+ * See the co-routine section of the WEB documentation for information on
+ * passing data between tasks and co-routines and between ISR's and
+ * co-routines.
+ *
+ * @param xHandle The handle of the calling co-routine. This is the xHandle
+ * parameter of the co-routine function.
+ *
+ * @param pxQueue The handle of the queue from which the data will be received.
+ * The handle is obtained as the return value when the queue is created using
+ * the xQueueCreate() API function.
+ *
+ * @param pvBuffer The buffer into which the received item is to be copied.
+ * The number of bytes of each queued item is specified when the queue is
+ * created. This number of bytes is copied into pvBuffer.
+ *
+ * @param xTickToDelay The number of ticks that the co-routine should block
+ * to wait for data to become available from the queue, should data not be
+ * available immediately. The actual amount of time this equates to is defined
+ * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
+ * portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see the
+ * crQUEUE_SEND example).
+ *
+ * @param pxResult The variable pointed to by pxResult will be set to pdPASS if
+ * data was successfully retrieved from the queue, otherwise it will be set to
+ * an error code as defined within ProjDefs.h.
+ *
+ * Example usage:
+
+ // A co-routine receives the number of an LED to flash from a queue. It
+ // blocks on the queue until the number is received.
+ static void prvCoRoutineFlashWorkTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static BaseType_t xResult;
+ static UBaseType_t uxLEDToFlash;
+
+ // All co-routines must start with a call to crSTART().
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Wait for data to become available on the queue.
+ crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
+
+ if( xResult == pdPASS )
+ {
+ // We received the LED to flash - flash it!
+ vParTestToggleLED( uxLEDToFlash );
+ }
+ }
+
+ crEND();
+ }
+ * \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE
+ * \ingroup Tasks
+ */
+#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
+{ \
+ *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), ( xTicksToWait ) ); \
+ if( *( pxResult ) == errQUEUE_BLOCKED ) \
+ { \
+ crSET_STATE0( ( xHandle ) ); \
+ *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), 0 ); \
+ } \
+ if( *( pxResult ) == errQUEUE_YIELD ) \
+ { \
+ crSET_STATE1( ( xHandle ) ); \
+ *( pxResult ) = pdPASS; \
+ } \
+}
+
+/**
+ * croutine. h
+ *
+ crQUEUE_SEND_FROM_ISR(
+ QueueHandle_t pxQueue,
+ void *pvItemToQueue,
+ BaseType_t xCoRoutinePreviouslyWoken
+ )
+ *
+ * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
+ * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
+ * functions used by tasks.
+ *
+ * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
+ * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
+ * xQueueReceiveFromISR() can only be used to pass data between a task and and
+ * ISR.
+ *
+ * crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue
+ * that is being used from within a co-routine.
+ *
+ * See the co-routine section of the WEB documentation for information on
+ * passing data between tasks and co-routines and between ISR's and
+ * co-routines.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto
+ * the same queue multiple times from a single interrupt. The first call
+ * should always pass in pdFALSE. Subsequent calls should pass in
+ * the value returned from the previous call.
+ *
+ * @return pdTRUE if a co-routine was woken by posting onto the queue. This is
+ * used by the ISR to determine if a context switch may be required following
+ * the ISR.
+ *
+ * Example usage:
+
+ // A co-routine that blocks on a queue waiting for characters to be received.
+ static void vReceivingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ char cRxedChar;
+ BaseType_t xResult;
+
+ // All co-routines must start with a call to crSTART().
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Wait for data to become available on the queue. This assumes the
+ // queue xCommsRxQueue has already been created!
+ crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
+
+ // Was a character received?
+ if( xResult == pdPASS )
+ {
+ // Process the character here.
+ }
+ }
+
+ // All co-routines must end with a call to crEND().
+ crEND();
+ }
+
+ // An ISR that uses a queue to send characters received on a serial port to
+ // a co-routine.
+ void vUART_ISR( void )
+ {
+ char cRxedChar;
+ BaseType_t xCRWokenByPost = pdFALSE;
+
+ // We loop around reading characters until there are none left in the UART.
+ while( UART_RX_REG_NOT_EMPTY() )
+ {
+ // Obtain the character from the UART.
+ cRxedChar = UART_RX_REG;
+
+ // Post the character onto a queue. xCRWokenByPost will be pdFALSE
+ // the first time around the loop. If the post causes a co-routine
+ // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
+ // In this manner we can ensure that if more than one co-routine is
+ // blocked on the queue only one is woken by this ISR no matter how
+ // many characters are posted to the queue.
+ xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
+ }
+ }
+ * \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR
+ * \ingroup Tasks
+ */
+#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )
+
+
+/**
+ * croutine. h
+ *
+ crQUEUE_SEND_FROM_ISR(
+ QueueHandle_t pxQueue,
+ void *pvBuffer,
+ BaseType_t * pxCoRoutineWoken
+ )
+ *
+ * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
+ * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
+ * functions used by tasks.
+ *
+ * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
+ * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
+ * xQueueReceiveFromISR() can only be used to pass data between a task and and
+ * ISR.
+ *
+ * crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data
+ * from a queue that is being used from within a co-routine (a co-routine
+ * posted to the queue).
+ *
+ * See the co-routine section of the WEB documentation for information on
+ * passing data between tasks and co-routines and between ISR's and
+ * co-routines.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvBuffer A pointer to a buffer into which the received item will be
+ * placed. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from the queue into
+ * pvBuffer.
+ *
+ * @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become
+ * available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a
+ * co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise
+ * *pxCoRoutineWoken will remain unchanged.
+ *
+ * @return pdTRUE an item was successfully received from the queue, otherwise
+ * pdFALSE.
+ *
+ * Example usage:
+
+ // A co-routine that posts a character to a queue then blocks for a fixed
+ // period. The character is incremented each time.
+ static void vSendingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // cChar holds its value while this co-routine is blocked and must therefore
+ // be declared static.
+ static char cCharToTx = 'a';
+ BaseType_t xResult;
+
+ // All co-routines must start with a call to crSTART().
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Send the next character to the queue.
+ crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
+
+ if( xResult == pdPASS )
+ {
+ // The character was successfully posted to the queue.
+ }
+ else
+ {
+ // Could not post the character to the queue.
+ }
+
+ // Enable the UART Tx interrupt to cause an interrupt in this
+ // hypothetical UART. The interrupt will obtain the character
+ // from the queue and send it.
+ ENABLE_RX_INTERRUPT();
+
+ // Increment to the next character then block for a fixed period.
+ // cCharToTx will maintain its value across the delay as it is
+ // declared static.
+ cCharToTx++;
+ if( cCharToTx > 'x' )
+ {
+ cCharToTx = 'a';
+ }
+ crDELAY( 100 );
+ }
+
+ // All co-routines must end with a call to crEND().
+ crEND();
+ }
+
+ // An ISR that uses a queue to receive characters to send on a UART.
+ void vUART_ISR( void )
+ {
+ char cCharToTx;
+ BaseType_t xCRWokenByPost = pdFALSE;
+
+ while( UART_TX_REG_EMPTY() )
+ {
+ // Are there any characters in the queue waiting to be sent?
+ // xCRWokenByPost will automatically be set to pdTRUE if a co-routine
+ // is woken by the post - ensuring that only a single co-routine is
+ // woken no matter how many times we go around this loop.
+ if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
+ {
+ SEND_CHARACTER( cCharToTx );
+ }
+ }
+ }
+ * \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR
+ * \ingroup Tasks
+ */
+#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )
+
+/*
+ * This function is intended for internal use by the co-routine macros only.
+ * The macro nature of the co-routine implementation requires that the
+ * prototype appears here. The function should not be used by application
+ * writers.
+ *
+ * Removes the current co-routine from its ready list and places it in the
+ * appropriate delayed list.
+ */
+void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList );
+
+/*
+ * This function is intended for internal use by the queue implementation only.
+ * The function should not be used by application writers.
+ *
+ * Removes the highest priority co-routine from the event list and places it in
+ * the pending ready list.
+ */
+BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CO_ROUTINE_H */
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h
new file mode 100644
index 0000000..4ea816c
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h
@@ -0,0 +1,321 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+#ifndef DEPRECATED_DEFINITIONS_H
+#define DEPRECATED_DEFINITIONS_H
+
+
+/* Each FreeRTOS port has a unique portmacro.h header file. Originally a
+pre-processor definition was used to ensure the pre-processor found the correct
+portmacro.h file for the port being used. That scheme was deprecated in favour
+of setting the compiler's include path such that it found the correct
+portmacro.h file - removing the need for the constant and allowing the
+portmacro.h file to be located anywhere in relation to the port being used. The
+definitions below remain in the code for backward compatibility only. New
+projects should not use them. */
+
+#ifdef OPEN_WATCOM_INDUSTRIAL_PC_PORT
+ #include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h"
+ typedef void ( __interrupt __far *pxISR )();
+#endif
+
+#ifdef OPEN_WATCOM_FLASH_LITE_186_PORT
+ #include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h"
+ typedef void ( __interrupt __far *pxISR )();
+#endif
+
+#ifdef GCC_MEGA_AVR
+ #include "../portable/GCC/ATMega323/portmacro.h"
+#endif
+
+#ifdef IAR_MEGA_AVR
+ #include "../portable/IAR/ATMega323/portmacro.h"
+#endif
+
+#ifdef MPLAB_PIC24_PORT
+ #include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h"
+#endif
+
+#ifdef MPLAB_DSPIC_PORT
+ #include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h"
+#endif
+
+#ifdef MPLAB_PIC18F_PORT
+ #include "../../Source/portable/MPLAB/PIC18F/portmacro.h"
+#endif
+
+#ifdef MPLAB_PIC32MX_PORT
+ #include "../../Source/portable/MPLAB/PIC32MX/portmacro.h"
+#endif
+
+#ifdef _FEDPICC
+ #include "libFreeRTOS/Include/portmacro.h"
+#endif
+
+#ifdef SDCC_CYGNAL
+ #include "../../Source/portable/SDCC/Cygnal/portmacro.h"
+#endif
+
+#ifdef GCC_ARM7
+ #include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h"
+#endif
+
+#ifdef GCC_ARM7_ECLIPSE
+ #include "portmacro.h"
+#endif
+
+#ifdef ROWLEY_LPC23xx
+ #include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h"
+#endif
+
+#ifdef IAR_MSP430
+ #include "..\..\Source\portable\IAR\MSP430\portmacro.h"
+#endif
+
+#ifdef GCC_MSP430
+ #include "../../Source/portable/GCC/MSP430F449/portmacro.h"
+#endif
+
+#ifdef ROWLEY_MSP430
+ #include "../../Source/portable/Rowley/MSP430F449/portmacro.h"
+#endif
+
+#ifdef ARM7_LPC21xx_KEIL_RVDS
+ #include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h"
+#endif
+
+#ifdef SAM7_GCC
+ #include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h"
+#endif
+
+#ifdef SAM7_IAR
+ #include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h"
+#endif
+
+#ifdef SAM9XE_IAR
+ #include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h"
+#endif
+
+#ifdef LPC2000_IAR
+ #include "..\..\Source\portable\IAR\LPC2000\portmacro.h"
+#endif
+
+#ifdef STR71X_IAR
+ #include "..\..\Source\portable\IAR\STR71x\portmacro.h"
+#endif
+
+#ifdef STR75X_IAR
+ #include "..\..\Source\portable\IAR\STR75x\portmacro.h"
+#endif
+
+#ifdef STR75X_GCC
+ #include "..\..\Source\portable\GCC\STR75x\portmacro.h"
+#endif
+
+#ifdef STR91X_IAR
+ #include "..\..\Source\portable\IAR\STR91x\portmacro.h"
+#endif
+
+#ifdef GCC_H8S
+ #include "../../Source/portable/GCC/H8S2329/portmacro.h"
+#endif
+
+#ifdef GCC_AT91FR40008
+ #include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h"
+#endif
+
+#ifdef RVDS_ARMCM3_LM3S102
+ #include "../../Source/portable/RVDS/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef GCC_ARMCM3_LM3S102
+ #include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef GCC_ARMCM3
+ #include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef IAR_ARM_CM3
+ #include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef IAR_ARMCM3_LM
+ #include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef HCS12_CODE_WARRIOR
+ #include "../../Source/portable/CodeWarrior/HCS12/portmacro.h"
+#endif
+
+#ifdef MICROBLAZE_GCC
+ #include "../../Source/portable/GCC/MicroBlaze/portmacro.h"
+#endif
+
+#ifdef TERN_EE
+ #include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h"
+#endif
+
+#ifdef GCC_HCS12
+ #include "../../Source/portable/GCC/HCS12/portmacro.h"
+#endif
+
+#ifdef GCC_MCF5235
+ #include "../../Source/portable/GCC/MCF5235/portmacro.h"
+#endif
+
+#ifdef COLDFIRE_V2_GCC
+ #include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h"
+#endif
+
+#ifdef COLDFIRE_V2_CODEWARRIOR
+ #include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h"
+#endif
+
+#ifdef GCC_PPC405
+ #include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h"
+#endif
+
+#ifdef GCC_PPC440
+ #include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h"
+#endif
+
+#ifdef _16FX_SOFTUNE
+ #include "..\..\Source\portable\Softune\MB96340\portmacro.h"
+#endif
+
+#ifdef BCC_INDUSTRIAL_PC_PORT
+ /* A short file name has to be used in place of the normal
+ FreeRTOSConfig.h when using the Borland compiler. */
+ #include "frconfig.h"
+ #include "..\portable\BCC\16BitDOS\PC\prtmacro.h"
+ typedef void ( __interrupt __far *pxISR )();
+#endif
+
+#ifdef BCC_FLASH_LITE_186_PORT
+ /* A short file name has to be used in place of the normal
+ FreeRTOSConfig.h when using the Borland compiler. */
+ #include "frconfig.h"
+ #include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h"
+ typedef void ( __interrupt __far *pxISR )();
+#endif
+
+#ifdef __GNUC__
+ #ifdef __AVR32_AVR32A__
+ #include "portmacro.h"
+ #endif
+#endif
+
+#ifdef __ICCAVR32__
+ #ifdef __CORE__
+ #if __CORE__ == __AVR32A__
+ #include "portmacro.h"
+ #endif
+ #endif
+#endif
+
+#ifdef __91467D
+ #include "portmacro.h"
+#endif
+
+#ifdef __96340
+ #include "portmacro.h"
+#endif
+
+
+#ifdef __IAR_V850ES_Fx3__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_V850ES_Jx3__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_V850ES_Jx3_L__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_V850ES_Jx2__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_V850ES_Hx2__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_78K0R_Kx3__
+ #include "../../Source/portable/IAR/78K0R/portmacro.h"
+#endif
+
+#ifdef __IAR_78K0R_Kx3L__
+ #include "../../Source/portable/IAR/78K0R/portmacro.h"
+#endif
+
+#endif /* DEPRECATED_DEFINITIONS_H */
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h
new file mode 100644
index 0000000..7331c91
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h
@@ -0,0 +1,797 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+#ifndef EVENT_GROUPS_H
+#define EVENT_GROUPS_H
+
+#ifndef INC_FREERTOS_H
+ #error "include FreeRTOS.h" must appear in source files before "include event_groups.h"
+#endif
+
+/* FreeRTOS includes. */
+#include "timers.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * An event group is a collection of bits to which an application can assign a
+ * meaning. For example, an application may create an event group to convey
+ * the status of various CAN bus related events in which bit 0 might mean "A CAN
+ * message has been received and is ready for processing", bit 1 might mean "The
+ * application has queued a message that is ready for sending onto the CAN
+ * network", and bit 2 might mean "It is time to send a SYNC message onto the
+ * CAN network" etc. A task can then test the bit values to see which events
+ * are active, and optionally enter the Blocked state to wait for a specified
+ * bit or a group of specified bits to be active. To continue the CAN bus
+ * example, a CAN controlling task can enter the Blocked state (and therefore
+ * not consume any processing time) until either bit 0, bit 1 or bit 2 are
+ * active, at which time the bit that was actually active would inform the task
+ * which action it had to take (process a received message, send a message, or
+ * send a SYNC).
+ *
+ * The event groups implementation contains intelligence to avoid race
+ * conditions that would otherwise occur were an application to use a simple
+ * variable for the same purpose. This is particularly important with respect
+ * to when a bit within an event group is to be cleared, and when bits have to
+ * be set and then tested atomically - as is the case where event groups are
+ * used to create a synchronisation point between multiple tasks (a
+ * 'rendezvous').
+ *
+ * \defgroup EventGroup
+ */
+
+
+
+/**
+ * event_groups.h
+ *
+ * Type by which event groups are referenced. For example, a call to
+ * xEventGroupCreate() returns an EventGroupHandle_t variable that can then
+ * be used as a parameter to other event group functions.
+ *
+ * \defgroup EventGroupHandle_t EventGroupHandle_t
+ * \ingroup EventGroup
+ */
+typedef void * EventGroupHandle_t;
+
+/*
+ * The type that holds event bits always matches TickType_t - therefore the
+ * number of bits it holds is set by configUSE_16_BIT_TICKS (16 bits if set to 1,
+ * 32 bits if set to 0.
+ *
+ * \defgroup EventBits_t EventBits_t
+ * \ingroup EventGroup
+ */
+typedef TickType_t EventBits_t;
+
+/**
+ * event_groups.h
+ *
+ EventGroupHandle_t xEventGroupCreate( void );
+
+ *
+ * Create a new event group.
+ *
+ * Internally, within the FreeRTOS implementation, event groups use a [small]
+ * block of memory, in which the event group's structure is stored. If an event
+ * groups is created using xEventGropuCreate() then the required memory is
+ * automatically dynamically allocated inside the xEventGroupCreate() function.
+ * (see http://www.freertos.org/a00111.html). If an event group is created
+ * using xEventGropuCreateStatic() then the application writer must instead
+ * provide the memory that will get used by the event group.
+ * xEventGroupCreateStatic() therefore allows an event group to be created
+ * without using any dynamic memory allocation.
+ *
+ * Although event groups are not related to ticks, for internal implementation
+ * reasons the number of bits available for use in an event group is dependent
+ * on the configUSE_16_BIT_TICKS setting in FreeRTOSConfig.h. If
+ * configUSE_16_BIT_TICKS is 1 then each event group contains 8 usable bits (bit
+ * 0 to bit 7). If configUSE_16_BIT_TICKS is set to 0 then each event group has
+ * 24 usable bits (bit 0 to bit 23). The EventBits_t type is used to store
+ * event bits within an event group.
+ *
+ * @return If the event group was created then a handle to the event group is
+ * returned. If there was insufficient FreeRTOS heap available to create the
+ * event group then NULL is returned. See http://www.freertos.org/a00111.html
+ *
+ * Example usage:
+
+ // Declare a variable to hold the created event group.
+ EventGroupHandle_t xCreatedEventGroup;
+
+ // Attempt to create the event group.
+ xCreatedEventGroup = xEventGroupCreate();
+
+ // Was the event group created successfully?
+ if( xCreatedEventGroup == NULL )
+ {
+ // The event group was not created because there was insufficient
+ // FreeRTOS heap available.
+ }
+ else
+ {
+ // The event group was created.
+ }
+
+ * \defgroup xEventGroupCreate xEventGroupCreate
+ * \ingroup EventGroup
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ EventGroupHandle_t xEventGroupCreate( void ) PRIVILEGED_FUNCTION;
+#endif
+
+/**
+ * event_groups.h
+ *
+ EventGroupHandle_t xEventGroupCreateStatic( EventGroupHandle_t * pxEventGroupBuffer );
+
+ *
+ * Create a new event group.
+ *
+ * Internally, within the FreeRTOS implementation, event groups use a [small]
+ * block of memory, in which the event group's structure is stored. If an event
+ * groups is created using xEventGropuCreate() then the required memory is
+ * automatically dynamically allocated inside the xEventGroupCreate() function.
+ * (see http://www.freertos.org/a00111.html). If an event group is created
+ * using xEventGropuCreateStatic() then the application writer must instead
+ * provide the memory that will get used by the event group.
+ * xEventGroupCreateStatic() therefore allows an event group to be created
+ * without using any dynamic memory allocation.
+ *
+ * Although event groups are not related to ticks, for internal implementation
+ * reasons the number of bits available for use in an event group is dependent
+ * on the configUSE_16_BIT_TICKS setting in FreeRTOSConfig.h. If
+ * configUSE_16_BIT_TICKS is 1 then each event group contains 8 usable bits (bit
+ * 0 to bit 7). If configUSE_16_BIT_TICKS is set to 0 then each event group has
+ * 24 usable bits (bit 0 to bit 23). The EventBits_t type is used to store
+ * event bits within an event group.
+ *
+ * @param pxEventGroupBuffer pxEventGroupBuffer must point to a variable of type
+ * StaticEventGroup_t, which will be then be used to hold the event group's data
+ * structures, removing the need for the memory to be allocated dynamically.
+ *
+ * @return If the event group was created then a handle to the event group is
+ * returned. If pxEventGroupBuffer was NULL then NULL is returned.
+ *
+ * Example usage:
+
+ // StaticEventGroup_t is a publicly accessible structure that has the same
+ // size and alignment requirements as the real event group structure. It is
+ // provided as a mechanism for applications to know the size of the event
+ // group (which is dependent on the architecture and configuration file
+ // settings) without breaking the strict data hiding policy by exposing the
+ // real event group internals. This StaticEventGroup_t variable is passed
+ // into the xSemaphoreCreateEventGroupStatic() function and is used to store
+ // the event group's data structures
+ StaticEventGroup_t xEventGroupBuffer;
+
+ // Create the event group without dynamically allocating any memory.
+ xEventGroup = xEventGroupCreateStatic( &xEventGroupBuffer );
+
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer ) PRIVILEGED_FUNCTION;
+#endif
+
+/**
+ * event_groups.h
+ *
+ EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup,
+ const EventBits_t uxBitsToWaitFor,
+ const BaseType_t xClearOnExit,
+ const BaseType_t xWaitForAllBits,
+ const TickType_t xTicksToWait );
+
+ *
+ * [Potentially] block to wait for one or more bits to be set within a
+ * previously created event group.
+ *
+ * This function cannot be called from an interrupt.
+ *
+ * @param xEventGroup The event group in which the bits are being tested. The
+ * event group must have previously been created using a call to
+ * xEventGroupCreate().
+ *
+ * @param uxBitsToWaitFor A bitwise value that indicates the bit or bits to test
+ * inside the event group. For example, to wait for bit 0 and/or bit 2 set
+ * uxBitsToWaitFor to 0x05. To wait for bits 0 and/or bit 1 and/or bit 2 set
+ * uxBitsToWaitFor to 0x07. Etc.
+ *
+ * @param xClearOnExit If xClearOnExit is set to pdTRUE then any bits within
+ * uxBitsToWaitFor that are set within the event group will be cleared before
+ * xEventGroupWaitBits() returns if the wait condition was met (if the function
+ * returns for a reason other than a timeout). If xClearOnExit is set to
+ * pdFALSE then the bits set in the event group are not altered when the call to
+ * xEventGroupWaitBits() returns.
+ *
+ * @param xWaitForAllBits If xWaitForAllBits is set to pdTRUE then
+ * xEventGroupWaitBits() will return when either all the bits in uxBitsToWaitFor
+ * are set or the specified block time expires. If xWaitForAllBits is set to
+ * pdFALSE then xEventGroupWaitBits() will return when any one of the bits set
+ * in uxBitsToWaitFor is set or the specified block time expires. The block
+ * time is specified by the xTicksToWait parameter.
+ *
+ * @param xTicksToWait The maximum amount of time (specified in 'ticks') to wait
+ * for one/all (depending on the xWaitForAllBits value) of the bits specified by
+ * uxBitsToWaitFor to become set.
+ *
+ * @return The value of the event group at the time either the bits being waited
+ * for became set, or the block time expired. Test the return value to know
+ * which bits were set. If xEventGroupWaitBits() returned because its timeout
+ * expired then not all the bits being waited for will be set. If
+ * xEventGroupWaitBits() returned because the bits it was waiting for were set
+ * then the returned value is the event group value before any bits were
+ * automatically cleared in the case that xClearOnExit parameter was set to
+ * pdTRUE.
+ *
+ * Example usage:
+
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
+
+ void aFunction( EventGroupHandle_t xEventGroup )
+ {
+ EventBits_t uxBits;
+ const TickType_t xTicksToWait = 100 / portTICK_PERIOD_MS;
+
+ // Wait a maximum of 100ms for either bit 0 or bit 4 to be set within
+ // the event group. Clear the bits before exiting.
+ uxBits = xEventGroupWaitBits(
+ xEventGroup, // The event group being tested.
+ BIT_0 | BIT_4, // The bits within the event group to wait for.
+ pdTRUE, // BIT_0 and BIT_4 should be cleared before returning.
+ pdFALSE, // Don't wait for both bits, either bit will do.
+ xTicksToWait ); // Wait a maximum of 100ms for either bit to be set.
+
+ if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+ {
+ // xEventGroupWaitBits() returned because both bits were set.
+ }
+ else if( ( uxBits & BIT_0 ) != 0 )
+ {
+ // xEventGroupWaitBits() returned because just BIT_0 was set.
+ }
+ else if( ( uxBits & BIT_4 ) != 0 )
+ {
+ // xEventGroupWaitBits() returned because just BIT_4 was set.
+ }
+ else
+ {
+ // xEventGroupWaitBits() returned because xTicksToWait ticks passed
+ // without either BIT_0 or BIT_4 becoming set.
+ }
+ }
+
+ * \defgroup xEventGroupWaitBits xEventGroupWaitBits
+ * \ingroup EventGroup
+ */
+EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * event_groups.h
+ *
+ EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear );
+
+ *
+ * Clear bits within an event group. This function cannot be called from an
+ * interrupt.
+ *
+ * @param xEventGroup The event group in which the bits are to be cleared.
+ *
+ * @param uxBitsToClear A bitwise value that indicates the bit or bits to clear
+ * in the event group. For example, to clear bit 3 only, set uxBitsToClear to
+ * 0x08. To clear bit 3 and bit 0 set uxBitsToClear to 0x09.
+ *
+ * @return The value of the event group before the specified bits were cleared.
+ *
+ * Example usage:
+
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
+
+ void aFunction( EventGroupHandle_t xEventGroup )
+ {
+ EventBits_t uxBits;
+
+ // Clear bit 0 and bit 4 in xEventGroup.
+ uxBits = xEventGroupClearBits(
+ xEventGroup, // The event group being updated.
+ BIT_0 | BIT_4 );// The bits being cleared.
+
+ if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+ {
+ // Both bit 0 and bit 4 were set before xEventGroupClearBits() was
+ // called. Both will now be clear (not set).
+ }
+ else if( ( uxBits & BIT_0 ) != 0 )
+ {
+ // Bit 0 was set before xEventGroupClearBits() was called. It will
+ // now be clear.
+ }
+ else if( ( uxBits & BIT_4 ) != 0 )
+ {
+ // Bit 4 was set before xEventGroupClearBits() was called. It will
+ // now be clear.
+ }
+ else
+ {
+ // Neither bit 0 nor bit 4 were set in the first place.
+ }
+ }
+
+ * \defgroup xEventGroupClearBits xEventGroupClearBits
+ * \ingroup EventGroup
+ */
+EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) PRIVILEGED_FUNCTION;
+
+/**
+ * event_groups.h
+ *
+ BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+
+ *
+ * A version of xEventGroupClearBits() that can be called from an interrupt.
+ *
+ * Setting bits in an event group is not a deterministic operation because there
+ * are an unknown number of tasks that may be waiting for the bit or bits being
+ * set. FreeRTOS does not allow nondeterministic operations to be performed
+ * while interrupts are disabled, so protects event groups that are accessed
+ * from tasks by suspending the scheduler rather than disabling interrupts. As
+ * a result event groups cannot be accessed directly from an interrupt service
+ * routine. Therefore xEventGroupClearBitsFromISR() sends a message to the
+ * timer task to have the clear operation performed in the context of the timer
+ * task.
+ *
+ * @param xEventGroup The event group in which the bits are to be cleared.
+ *
+ * @param uxBitsToClear A bitwise value that indicates the bit or bits to clear.
+ * For example, to clear bit 3 only, set uxBitsToClear to 0x08. To clear bit 3
+ * and bit 0 set uxBitsToClear to 0x09.
+ *
+ * @return If the request to execute the function was posted successfully then
+ * pdPASS is returned, otherwise pdFALSE is returned. pdFALSE will be returned
+ * if the timer service queue was full.
+ *
+ * Example usage:
+
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
+
+ // An event group which it is assumed has already been created by a call to
+ // xEventGroupCreate().
+ EventGroupHandle_t xEventGroup;
+
+ void anInterruptHandler( void )
+ {
+ // Clear bit 0 and bit 4 in xEventGroup.
+ xResult = xEventGroupClearBitsFromISR(
+ xEventGroup, // The event group being updated.
+ BIT_0 | BIT_4 ); // The bits being set.
+
+ if( xResult == pdPASS )
+ {
+ // The message was posted successfully.
+ }
+ }
+
+ * \defgroup xEventGroupClearBitsFromISR xEventGroupClearBitsFromISR
+ * \ingroup EventGroup
+ */
+#if( configUSE_TRACE_FACILITY == 1 )
+ BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) PRIVILEGED_FUNCTION;
+#else
+ #define xEventGroupClearBitsFromISR( xEventGroup, uxBitsToClear ) xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToClear, NULL )
+#endif
+
+/**
+ * event_groups.h
+ *
+ EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+
+ *
+ * Set bits within an event group.
+ * This function cannot be called from an interrupt. xEventGroupSetBitsFromISR()
+ * is a version that can be called from an interrupt.
+ *
+ * Setting bits in an event group will automatically unblock tasks that are
+ * blocked waiting for the bits.
+ *
+ * @param xEventGroup The event group in which the bits are to be set.
+ *
+ * @param uxBitsToSet A bitwise value that indicates the bit or bits to set.
+ * For example, to set bit 3 only, set uxBitsToSet to 0x08. To set bit 3
+ * and bit 0 set uxBitsToSet to 0x09.
+ *
+ * @return The value of the event group at the time the call to
+ * xEventGroupSetBits() returns. There are two reasons why the returned value
+ * might have the bits specified by the uxBitsToSet parameter cleared. First,
+ * if setting a bit results in a task that was waiting for the bit leaving the
+ * blocked state then it is possible the bit will be cleared automatically
+ * (see the xClearBitOnExit parameter of xEventGroupWaitBits()). Second, any
+ * unblocked (or otherwise Ready state) task that has a priority above that of
+ * the task that called xEventGroupSetBits() will execute and may change the
+ * event group value before the call to xEventGroupSetBits() returns.
+ *
+ * Example usage:
+
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
+
+ void aFunction( EventGroupHandle_t xEventGroup )
+ {
+ EventBits_t uxBits;
+
+ // Set bit 0 and bit 4 in xEventGroup.
+ uxBits = xEventGroupSetBits(
+ xEventGroup, // The event group being updated.
+ BIT_0 | BIT_4 );// The bits being set.
+
+ if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+ {
+ // Both bit 0 and bit 4 remained set when the function returned.
+ }
+ else if( ( uxBits & BIT_0 ) != 0 )
+ {
+ // Bit 0 remained set when the function returned, but bit 4 was
+ // cleared. It might be that bit 4 was cleared automatically as a
+ // task that was waiting for bit 4 was removed from the Blocked
+ // state.
+ }
+ else if( ( uxBits & BIT_4 ) != 0 )
+ {
+ // Bit 4 remained set when the function returned, but bit 0 was
+ // cleared. It might be that bit 0 was cleared automatically as a
+ // task that was waiting for bit 0 was removed from the Blocked
+ // state.
+ }
+ else
+ {
+ // Neither bit 0 nor bit 4 remained set. It might be that a task
+ // was waiting for both of the bits to be set, and the bits were
+ // cleared as the task left the Blocked state.
+ }
+ }
+
+ * \defgroup xEventGroupSetBits xEventGroupSetBits
+ * \ingroup EventGroup
+ */
+EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) PRIVILEGED_FUNCTION;
+
+/**
+ * event_groups.h
+ *
+ BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken );
+
+ *
+ * A version of xEventGroupSetBits() that can be called from an interrupt.
+ *
+ * Setting bits in an event group is not a deterministic operation because there
+ * are an unknown number of tasks that may be waiting for the bit or bits being
+ * set. FreeRTOS does not allow nondeterministic operations to be performed in
+ * interrupts or from critical sections. Therefore xEventGroupSetBitsFromISR()
+ * sends a message to the timer task to have the set operation performed in the
+ * context of the timer task - where a scheduler lock is used in place of a
+ * critical section.
+ *
+ * @param xEventGroup The event group in which the bits are to be set.
+ *
+ * @param uxBitsToSet A bitwise value that indicates the bit or bits to set.
+ * For example, to set bit 3 only, set uxBitsToSet to 0x08. To set bit 3
+ * and bit 0 set uxBitsToSet to 0x09.
+ *
+ * @param pxHigherPriorityTaskWoken As mentioned above, calling this function
+ * will result in a message being sent to the timer daemon task. If the
+ * priority of the timer daemon task is higher than the priority of the
+ * currently running task (the task the interrupt interrupted) then
+ * *pxHigherPriorityTaskWoken will be set to pdTRUE by
+ * xEventGroupSetBitsFromISR(), indicating that a context switch should be
+ * requested before the interrupt exits. For that reason
+ * *pxHigherPriorityTaskWoken must be initialised to pdFALSE. See the
+ * example code below.
+ *
+ * @return If the request to execute the function was posted successfully then
+ * pdPASS is returned, otherwise pdFALSE is returned. pdFALSE will be returned
+ * if the timer service queue was full.
+ *
+ * Example usage:
+
+ #define BIT_0 ( 1 << 0 )
+ #define BIT_4 ( 1 << 4 )
+
+ // An event group which it is assumed has already been created by a call to
+ // xEventGroupCreate().
+ EventGroupHandle_t xEventGroup;
+
+ void anInterruptHandler( void )
+ {
+ BaseType_t xHigherPriorityTaskWoken, xResult;
+
+ // xHigherPriorityTaskWoken must be initialised to pdFALSE.
+ xHigherPriorityTaskWoken = pdFALSE;
+
+ // Set bit 0 and bit 4 in xEventGroup.
+ xResult = xEventGroupSetBitsFromISR(
+ xEventGroup, // The event group being updated.
+ BIT_0 | BIT_4 // The bits being set.
+ &xHigherPriorityTaskWoken );
+
+ // Was the message posted successfully?
+ if( xResult == pdPASS )
+ {
+ // If xHigherPriorityTaskWoken is now set to pdTRUE then a context
+ // switch should be requested. The macro used is port specific and
+ // will be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() -
+ // refer to the documentation page for the port being used.
+ portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+ }
+ }
+
+ * \defgroup xEventGroupSetBitsFromISR xEventGroupSetBitsFromISR
+ * \ingroup EventGroup
+ */
+#if( configUSE_TRACE_FACILITY == 1 )
+ BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+#else
+ #define xEventGroupSetBitsFromISR( xEventGroup, uxBitsToSet, pxHigherPriorityTaskWoken ) xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToSet, pxHigherPriorityTaskWoken )
+#endif
+
+/**
+ * event_groups.h
+ *
+ EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup,
+ const EventBits_t uxBitsToSet,
+ const EventBits_t uxBitsToWaitFor,
+ TickType_t xTicksToWait );
+
+ *
+ * Atomically set bits within an event group, then wait for a combination of
+ * bits to be set within the same event group. This functionality is typically
+ * used to synchronise multiple tasks, where each task has to wait for the other
+ * tasks to reach a synchronisation point before proceeding.
+ *
+ * This function cannot be used from an interrupt.
+ *
+ * The function will return before its block time expires if the bits specified
+ * by the uxBitsToWait parameter are set, or become set within that time. In
+ * this case all the bits specified by uxBitsToWait will be automatically
+ * cleared before the function returns.
+ *
+ * @param xEventGroup The event group in which the bits are being tested. The
+ * event group must have previously been created using a call to
+ * xEventGroupCreate().
+ *
+ * @param uxBitsToSet The bits to set in the event group before determining
+ * if, and possibly waiting for, all the bits specified by the uxBitsToWait
+ * parameter are set.
+ *
+ * @param uxBitsToWaitFor A bitwise value that indicates the bit or bits to test
+ * inside the event group. For example, to wait for bit 0 and bit 2 set
+ * uxBitsToWaitFor to 0x05. To wait for bits 0 and bit 1 and bit 2 set
+ * uxBitsToWaitFor to 0x07. Etc.
+ *
+ * @param xTicksToWait The maximum amount of time (specified in 'ticks') to wait
+ * for all of the bits specified by uxBitsToWaitFor to become set.
+ *
+ * @return The value of the event group at the time either the bits being waited
+ * for became set, or the block time expired. Test the return value to know
+ * which bits were set. If xEventGroupSync() returned because its timeout
+ * expired then not all the bits being waited for will be set. If
+ * xEventGroupSync() returned because all the bits it was waiting for were
+ * set then the returned value is the event group value before any bits were
+ * automatically cleared.
+ *
+ * Example usage:
+
+ // Bits used by the three tasks.
+ #define TASK_0_BIT ( 1 << 0 )
+ #define TASK_1_BIT ( 1 << 1 )
+ #define TASK_2_BIT ( 1 << 2 )
+
+ #define ALL_SYNC_BITS ( TASK_0_BIT | TASK_1_BIT | TASK_2_BIT )
+
+ // Use an event group to synchronise three tasks. It is assumed this event
+ // group has already been created elsewhere.
+ EventGroupHandle_t xEventBits;
+
+ void vTask0( void *pvParameters )
+ {
+ EventBits_t uxReturn;
+ TickType_t xTicksToWait = 100 / portTICK_PERIOD_MS;
+
+ for( ;; )
+ {
+ // Perform task functionality here.
+
+ // Set bit 0 in the event flag to note this task has reached the
+ // sync point. The other two tasks will set the other two bits defined
+ // by ALL_SYNC_BITS. All three tasks have reached the synchronisation
+ // point when all the ALL_SYNC_BITS are set. Wait a maximum of 100ms
+ // for this to happen.
+ uxReturn = xEventGroupSync( xEventBits, TASK_0_BIT, ALL_SYNC_BITS, xTicksToWait );
+
+ if( ( uxReturn & ALL_SYNC_BITS ) == ALL_SYNC_BITS )
+ {
+ // All three tasks reached the synchronisation point before the call
+ // to xEventGroupSync() timed out.
+ }
+ }
+ }
+
+ void vTask1( void *pvParameters )
+ {
+ for( ;; )
+ {
+ // Perform task functionality here.
+
+ // Set bit 1 in the event flag to note this task has reached the
+ // synchronisation point. The other two tasks will set the other two
+ // bits defined by ALL_SYNC_BITS. All three tasks have reached the
+ // synchronisation point when all the ALL_SYNC_BITS are set. Wait
+ // indefinitely for this to happen.
+ xEventGroupSync( xEventBits, TASK_1_BIT, ALL_SYNC_BITS, portMAX_DELAY );
+
+ // xEventGroupSync() was called with an indefinite block time, so
+ // this task will only reach here if the syncrhonisation was made by all
+ // three tasks, so there is no need to test the return value.
+ }
+ }
+
+ void vTask2( void *pvParameters )
+ {
+ for( ;; )
+ {
+ // Perform task functionality here.
+
+ // Set bit 2 in the event flag to note this task has reached the
+ // synchronisation point. The other two tasks will set the other two
+ // bits defined by ALL_SYNC_BITS. All three tasks have reached the
+ // synchronisation point when all the ALL_SYNC_BITS are set. Wait
+ // indefinitely for this to happen.
+ xEventGroupSync( xEventBits, TASK_2_BIT, ALL_SYNC_BITS, portMAX_DELAY );
+
+ // xEventGroupSync() was called with an indefinite block time, so
+ // this task will only reach here if the syncrhonisation was made by all
+ // three tasks, so there is no need to test the return value.
+ }
+ }
+
+
+ * \defgroup xEventGroupSync xEventGroupSync
+ * \ingroup EventGroup
+ */
+EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+
+/**
+ * event_groups.h
+ *
+ EventBits_t xEventGroupGetBits( EventGroupHandle_t xEventGroup );
+
+ *
+ * Returns the current value of the bits in an event group. This function
+ * cannot be used from an interrupt.
+ *
+ * @param xEventGroup The event group being queried.
+ *
+ * @return The event group bits at the time xEventGroupGetBits() was called.
+ *
+ * \defgroup xEventGroupGetBits xEventGroupGetBits
+ * \ingroup EventGroup
+ */
+#define xEventGroupGetBits( xEventGroup ) xEventGroupClearBits( xEventGroup, 0 )
+
+/**
+ * event_groups.h
+ *
+ EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup );
+
+ *
+ * A version of xEventGroupGetBits() that can be called from an ISR.
+ *
+ * @param xEventGroup The event group being queried.
+ *
+ * @return The event group bits at the time xEventGroupGetBitsFromISR() was called.
+ *
+ * \defgroup xEventGroupGetBitsFromISR xEventGroupGetBitsFromISR
+ * \ingroup EventGroup
+ */
+EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION;
+
+/**
+ * event_groups.h
+ *
+ void xEventGroupDelete( EventGroupHandle_t xEventGroup );
+
+ *
+ * Delete an event group that was previously created by a call to
+ * xEventGroupCreate(). Tasks that are blocked on the event group will be
+ * unblocked and obtain 0 as the event group's value.
+ *
+ * @param xEventGroup The event group being deleted.
+ */
+void vEventGroupDelete( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION;
+
+/* For internal use only. */
+void vEventGroupSetBitsCallback( void *pvEventGroup, const uint32_t ulBitsToSet ) PRIVILEGED_FUNCTION;
+void vEventGroupClearBitsCallback( void *pvEventGroup, const uint32_t ulBitsToClear ) PRIVILEGED_FUNCTION;
+
+
+#if (configUSE_TRACE_FACILITY == 1)
+ UBaseType_t uxEventGroupGetNumber( void* xEventGroup ) PRIVILEGED_FUNCTION;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* EVENT_GROUPS_H */
+
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/list.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/list.h
new file mode 100644
index 0000000..a080d27
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/list.h
@@ -0,0 +1,453 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+/*
+ * This is the list implementation used by the scheduler. While it is tailored
+ * heavily for the schedulers needs, it is also available for use by
+ * application code.
+ *
+ * list_ts can only store pointers to list_item_ts. Each ListItem_t contains a
+ * numeric value (xItemValue). Most of the time the lists are sorted in
+ * descending item value order.
+ *
+ * Lists are created already containing one list item. The value of this
+ * item is the maximum possible that can be stored, it is therefore always at
+ * the end of the list and acts as a marker. The list member pxHead always
+ * points to this marker - even though it is at the tail of the list. This
+ * is because the tail contains a wrap back pointer to the true head of
+ * the list.
+ *
+ * In addition to it's value, each list item contains a pointer to the next
+ * item in the list (pxNext), a pointer to the list it is in (pxContainer)
+ * and a pointer to back to the object that contains it. These later two
+ * pointers are included for efficiency of list manipulation. There is
+ * effectively a two way link between the object containing the list item and
+ * the list item itself.
+ *
+ *
+ * \page ListIntroduction List Implementation
+ * \ingroup FreeRTOSIntro
+ */
+
+#ifndef INC_FREERTOS_H
+ #error FreeRTOS.h must be included before list.h
+#endif
+
+#ifndef LIST_H
+#define LIST_H
+
+/*
+ * The list structure members are modified from within interrupts, and therefore
+ * by rights should be declared volatile. However, they are only modified in a
+ * functionally atomic way (within critical sections of with the scheduler
+ * suspended) and are either passed by reference into a function or indexed via
+ * a volatile variable. Therefore, in all use cases tested so far, the volatile
+ * qualifier can be omitted in order to provide a moderate performance
+ * improvement without adversely affecting functional behaviour. The assembly
+ * instructions generated by the IAR, ARM and GCC compilers when the respective
+ * compiler's options were set for maximum optimisation has been inspected and
+ * deemed to be as intended. That said, as compiler technology advances, and
+ * especially if aggressive cross module optimisation is used (a use case that
+ * has not been exercised to any great extend) then it is feasible that the
+ * volatile qualifier will be needed for correct optimisation. It is expected
+ * that a compiler removing essential code because, without the volatile
+ * qualifier on the list structure members and with aggressive cross module
+ * optimisation, the compiler deemed the code unnecessary will result in
+ * complete and obvious failure of the scheduler. If this is ever experienced
+ * then the volatile qualifier can be inserted in the relevant places within the
+ * list structures by simply defining configLIST_VOLATILE to volatile in
+ * FreeRTOSConfig.h (as per the example at the bottom of this comment block).
+ * If configLIST_VOLATILE is not defined then the preprocessor directives below
+ * will simply #define configLIST_VOLATILE away completely.
+ *
+ * To use volatile list structure members then add the following line to
+ * FreeRTOSConfig.h (without the quotes):
+ * "#define configLIST_VOLATILE volatile"
+ */
+#ifndef configLIST_VOLATILE
+ #define configLIST_VOLATILE
+#endif /* configSUPPORT_CROSS_MODULE_OPTIMISATION */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Macros that can be used to place known values within the list structures,
+then check that the known values do not get corrupted during the execution of
+the application. These may catch the list data structures being overwritten in
+memory. They will not catch data errors caused by incorrect configuration or
+use of FreeRTOS.*/
+#if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 )
+ /* Define the macros to do nothing. */
+ #define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE
+ #define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE
+ #define listFIRST_LIST_INTEGRITY_CHECK_VALUE
+ #define listSECOND_LIST_INTEGRITY_CHECK_VALUE
+ #define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
+ #define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
+ #define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList )
+ #define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList )
+ #define listTEST_LIST_ITEM_INTEGRITY( pxItem )
+ #define listTEST_LIST_INTEGRITY( pxList )
+#else
+ /* Define macros that add new members into the list structures. */
+ #define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue1;
+ #define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue2;
+ #define listFIRST_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue1;
+ #define listSECOND_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue2;
+
+ /* Define macros that set the new structure members to known values. */
+ #define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
+ #define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
+ #define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) ( pxList )->xListIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
+ #define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) ( pxList )->xListIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
+
+ /* Define macros that will assert if one of the structure members does not
+ contain its expected value. */
+ #define listTEST_LIST_ITEM_INTEGRITY( pxItem ) configASSERT( ( ( pxItem )->xListItemIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxItem )->xListItemIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
+ #define listTEST_LIST_INTEGRITY( pxList ) configASSERT( ( ( pxList )->xListIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxList )->xListIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
+#endif /* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES */
+
+
+/*
+ * Definition of the only type of object that a list can contain.
+ */
+struct xLIST_ITEM
+{
+ listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+ configLIST_VOLATILE TickType_t xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */
+ struct xLIST_ITEM * configLIST_VOLATILE pxNext; /*< Pointer to the next ListItem_t in the list. */
+ struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /*< Pointer to the previous ListItem_t in the list. */
+ void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */
+ void * configLIST_VOLATILE pvContainer; /*< Pointer to the list in which this list item is placed (if any). */
+ listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+};
+typedef struct xLIST_ITEM ListItem_t; /* For some reason lint wants this as two separate definitions. */
+
+struct xMINI_LIST_ITEM
+{
+ listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+ configLIST_VOLATILE TickType_t xItemValue;
+ struct xLIST_ITEM * configLIST_VOLATILE pxNext;
+ struct xLIST_ITEM * configLIST_VOLATILE pxPrevious;
+};
+typedef struct xMINI_LIST_ITEM MiniListItem_t;
+
+/*
+ * Definition of the type of queue used by the scheduler.
+ */
+typedef struct xLIST
+{
+ listFIRST_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+ configLIST_VOLATILE UBaseType_t uxNumberOfItems;
+ ListItem_t * configLIST_VOLATILE pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */
+ MiniListItem_t xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */
+ listSECOND_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+} List_t;
+
+/*
+ * Access macro to set the owner of a list item. The owner of a list item
+ * is the object (usually a TCB) that contains the list item.
+ *
+ * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
+ * \ingroup LinkedList
+ */
+#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( ( pxListItem )->pvOwner = ( void * ) ( pxOwner ) )
+
+/*
+ * Access macro to get the owner of a list item. The owner of a list item
+ * is the object (usually a TCB) that contains the list item.
+ *
+ * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
+ * \ingroup LinkedList
+ */
+#define listGET_LIST_ITEM_OWNER( pxListItem ) ( ( pxListItem )->pvOwner )
+
+/*
+ * Access macro to set the value of the list item. In most cases the value is
+ * used to sort the list in descending order.
+ *
+ * \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE
+ * \ingroup LinkedList
+ */
+#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( ( pxListItem )->xItemValue = ( xValue ) )
+
+/*
+ * Access macro to retrieve the value of the list item. The value can
+ * represent anything - for example the priority of a task, or the time at
+ * which a task should be unblocked.
+ *
+ * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
+ * \ingroup LinkedList
+ */
+#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )
+
+/*
+ * Access macro to retrieve the value of the list item at the head of a given
+ * list.
+ *
+ * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
+ * \ingroup LinkedList
+ */
+#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext->xItemValue )
+
+/*
+ * Return the list item at the head of the list.
+ *
+ * \page listGET_HEAD_ENTRY listGET_HEAD_ENTRY
+ * \ingroup LinkedList
+ */
+#define listGET_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext )
+
+/*
+ * Return the list item at the head of the list.
+ *
+ * \page listGET_NEXT listGET_NEXT
+ * \ingroup LinkedList
+ */
+#define listGET_NEXT( pxListItem ) ( ( pxListItem )->pxNext )
+
+/*
+ * Return the list item that marks the end of the list
+ *
+ * \page listGET_END_MARKER listGET_END_MARKER
+ * \ingroup LinkedList
+ */
+#define listGET_END_MARKER( pxList ) ( ( ListItem_t const * ) ( &( ( pxList )->xListEnd ) ) )
+
+/*
+ * Access macro to determine if a list contains any items. The macro will
+ * only have the value true if the list is empty.
+ *
+ * \page listLIST_IS_EMPTY listLIST_IS_EMPTY
+ * \ingroup LinkedList
+ */
+#define listLIST_IS_EMPTY( pxList ) ( ( BaseType_t ) ( ( pxList )->uxNumberOfItems == ( UBaseType_t ) 0 ) )
+
+/*
+ * Access macro to return the number of items in the list.
+ */
+#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )
+
+/*
+ * Access function to obtain the owner of the next entry in a list.
+ *
+ * The list member pxIndex is used to walk through a list. Calling
+ * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list
+ * and returns that entry's pxOwner parameter. Using multiple calls to this
+ * function it is therefore possible to move through every item contained in
+ * a list.
+ *
+ * The pxOwner parameter of a list item is a pointer to the object that owns
+ * the list item. In the scheduler this is normally a task control block.
+ * The pxOwner parameter effectively creates a two way link between the list
+ * item and its owner.
+ *
+ * @param pxTCB pxTCB is set to the address of the owner of the next list item.
+ * @param pxList The list from which the next item owner is to be returned.
+ *
+ * \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY
+ * \ingroup LinkedList
+ */
+#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \
+{ \
+List_t * const pxConstList = ( pxList ); \
+ /* Increment the index to the next item and return the item, ensuring */ \
+ /* we don't return the marker used at the end of the list. */ \
+ ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
+ if( ( void * ) ( pxConstList )->pxIndex == ( void * ) &( ( pxConstList )->xListEnd ) ) \
+ { \
+ ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
+ } \
+ ( pxTCB ) = ( pxConstList )->pxIndex->pvOwner; \
+}
+
+
+/*
+ * Access function to obtain the owner of the first entry in a list. Lists
+ * are normally sorted in ascending item value order.
+ *
+ * This function returns the pxOwner member of the first item in the list.
+ * The pxOwner parameter of a list item is a pointer to the object that owns
+ * the list item. In the scheduler this is normally a task control block.
+ * The pxOwner parameter effectively creates a two way link between the list
+ * item and its owner.
+ *
+ * @param pxList The list from which the owner of the head item is to be
+ * returned.
+ *
+ * \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY
+ * \ingroup LinkedList
+ */
+#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( (&( ( pxList )->xListEnd ))->pxNext->pvOwner )
+
+/*
+ * Check to see if a list item is within a list. The list item maintains a
+ * "container" pointer that points to the list it is in. All this macro does
+ * is check to see if the container and the list match.
+ *
+ * @param pxList The list we want to know if the list item is within.
+ * @param pxListItem The list item we want to know if is in the list.
+ * @return pdTRUE if the list item is in the list, otherwise pdFALSE.
+ */
+#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( BaseType_t ) ( ( pxListItem )->pvContainer == ( void * ) ( pxList ) ) )
+
+/*
+ * Return the list a list item is contained within (referenced from).
+ *
+ * @param pxListItem The list item being queried.
+ * @return A pointer to the List_t object that references the pxListItem
+ */
+#define listLIST_ITEM_CONTAINER( pxListItem ) ( ( pxListItem )->pvContainer )
+
+/*
+ * This provides a crude means of knowing if a list has been initialised, as
+ * pxList->xListEnd.xItemValue is set to portMAX_DELAY by the vListInitialise()
+ * function.
+ */
+#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY )
+
+/*
+ * Must be called before a list is used! This initialises all the members
+ * of the list structure and inserts the xListEnd item into the list as a
+ * marker to the back of the list.
+ *
+ * @param pxList Pointer to the list being initialised.
+ *
+ * \page vListInitialise vListInitialise
+ * \ingroup LinkedList
+ */
+void vListInitialise( List_t * const pxList ) PRIVILEGED_FUNCTION;
+
+/*
+ * Must be called before a list item is used. This sets the list container to
+ * null so the item does not think that it is already contained in a list.
+ *
+ * @param pxItem Pointer to the list item being initialised.
+ *
+ * \page vListInitialiseItem vListInitialiseItem
+ * \ingroup LinkedList
+ */
+void vListInitialiseItem( ListItem_t * const pxItem ) PRIVILEGED_FUNCTION;
+
+/*
+ * Insert a list item into a list. The item will be inserted into the list in
+ * a position determined by its item value (descending item value order).
+ *
+ * @param pxList The list into which the item is to be inserted.
+ *
+ * @param pxNewListItem The item that is to be placed in the list.
+ *
+ * \page vListInsert vListInsert
+ * \ingroup LinkedList
+ */
+void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
+
+/*
+ * Insert a list item into a list. The item will be inserted in a position
+ * such that it will be the last item within the list returned by multiple
+ * calls to listGET_OWNER_OF_NEXT_ENTRY.
+ *
+ * The list member pxIndex is used to walk through a list. Calling
+ * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list.
+ * Placing an item in a list using vListInsertEnd effectively places the item
+ * in the list position pointed to by pxIndex. This means that every other
+ * item within the list will be returned by listGET_OWNER_OF_NEXT_ENTRY before
+ * the pxIndex parameter again points to the item being inserted.
+ *
+ * @param pxList The list into which the item is to be inserted.
+ *
+ * @param pxNewListItem The list item to be inserted into the list.
+ *
+ * \page vListInsertEnd vListInsertEnd
+ * \ingroup LinkedList
+ */
+void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
+
+/*
+ * Remove an item from a list. The list item has a pointer to the list that
+ * it is in, so only the list item need be passed into the function.
+ *
+ * @param uxListRemove The item to be removed. The item will remove itself from
+ * the list pointed to by it's pxContainer parameter.
+ *
+ * @return The number of items that remain in the list after the list item has
+ * been removed.
+ *
+ * \page uxListRemove uxListRemove
+ * \ingroup LinkedList
+ */
+UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove ) PRIVILEGED_FUNCTION;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h
new file mode 100644
index 0000000..8f7500b
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h
@@ -0,0 +1,177 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+/*
+ * When the MPU is used the standard (non MPU) API functions are mapped to
+ * equivalents that start "MPU_", the prototypes for which are defined in this
+ * header files. This will cause the application code to call the MPU_ version
+ * which wraps the non-MPU version with privilege promoting then demoting code,
+ * so the kernel code always runs will full privileges.
+ */
+
+
+#ifndef MPU_PROTOTYPES_H
+#define MPU_PROTOTYPES_H
+
+/* MPU versions of tasks.h API function. */
+BaseType_t MPU_xTaskCreate( TaskFunction_t pxTaskCode, const char * const pcName, const uint16_t usStackDepth, void * const pvParameters, UBaseType_t uxPriority, TaskHandle_t * const pxCreatedTask );
+TaskHandle_t MPU_xTaskCreateStatic( TaskFunction_t pxTaskCode, const char * const pcName, const uint32_t ulStackDepth, void * const pvParameters, UBaseType_t uxPriority, StackType_t * const puxStackBuffer, StaticTask_t * const pxTaskBuffer );
+BaseType_t MPU_xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask );
+void MPU_vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions );
+void MPU_vTaskDelete( TaskHandle_t xTaskToDelete );
+void MPU_vTaskDelay( const TickType_t xTicksToDelay );
+void MPU_vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement );
+BaseType_t MPU_xTaskAbortDelay( TaskHandle_t xTask );
+UBaseType_t MPU_uxTaskPriorityGet( TaskHandle_t xTask );
+eTaskState MPU_eTaskGetState( TaskHandle_t xTask );
+void MPU_vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState );
+void MPU_vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority );
+void MPU_vTaskSuspend( TaskHandle_t xTaskToSuspend );
+void MPU_vTaskResume( TaskHandle_t xTaskToResume );
+void MPU_vTaskStartScheduler( void );
+void MPU_vTaskSuspendAll( void );
+BaseType_t MPU_xTaskResumeAll( void );
+TickType_t MPU_xTaskGetTickCount( void );
+UBaseType_t MPU_uxTaskGetNumberOfTasks( void );
+char * MPU_pcTaskGetName( TaskHandle_t xTaskToQuery );
+TaskHandle_t MPU_xTaskGetHandle( const char *pcNameToQuery );
+UBaseType_t MPU_uxTaskGetStackHighWaterMark( TaskHandle_t xTask );
+void MPU_vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction );
+TaskHookFunction_t MPU_xTaskGetApplicationTaskTag( TaskHandle_t xTask );
+void MPU_vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue );
+void * MPU_pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex );
+BaseType_t MPU_xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter );
+TaskHandle_t MPU_xTaskGetIdleTaskHandle( void );
+UBaseType_t MPU_uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime );
+void MPU_vTaskList( char * pcWriteBuffer );
+void MPU_vTaskGetRunTimeStats( char *pcWriteBuffer );
+BaseType_t MPU_xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue );
+BaseType_t MPU_xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait );
+uint32_t MPU_ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait );
+BaseType_t MPU_xTaskNotifyStateClear( TaskHandle_t xTask );
+BaseType_t MPU_xTaskIncrementTick( void );
+TaskHandle_t MPU_xTaskGetCurrentTaskHandle( void );
+void MPU_vTaskSetTimeOutState( TimeOut_t * const pxTimeOut );
+BaseType_t MPU_xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait );
+void MPU_vTaskMissedYield( void );
+BaseType_t MPU_xTaskGetSchedulerState( void );
+
+/* MPU versions of queue.h API function. */
+BaseType_t MPU_xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition );
+BaseType_t MPU_xQueueGenericReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait, const BaseType_t xJustPeek );
+UBaseType_t MPU_uxQueueMessagesWaiting( const QueueHandle_t xQueue );
+UBaseType_t MPU_uxQueueSpacesAvailable( const QueueHandle_t xQueue );
+void MPU_vQueueDelete( QueueHandle_t xQueue );
+QueueHandle_t MPU_xQueueCreateMutex( const uint8_t ucQueueType );
+QueueHandle_t MPU_xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue );
+QueueHandle_t MPU_xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount );
+QueueHandle_t MPU_xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue );
+void* MPU_xQueueGetMutexHolder( QueueHandle_t xSemaphore );
+BaseType_t MPU_xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait );
+BaseType_t MPU_xQueueGiveMutexRecursive( QueueHandle_t pxMutex );
+void MPU_vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcName );
+void MPU_vQueueUnregisterQueue( QueueHandle_t xQueue );
+const char * MPU_pcQueueGetName( QueueHandle_t xQueue );
+QueueHandle_t MPU_xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType );
+QueueHandle_t MPU_xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType );
+QueueSetHandle_t MPU_xQueueCreateSet( const UBaseType_t uxEventQueueLength );
+BaseType_t MPU_xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet );
+BaseType_t MPU_xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet );
+QueueSetMemberHandle_t MPU_xQueueSelectFromSet( QueueSetHandle_t xQueueSet, const TickType_t xTicksToWait );
+BaseType_t MPU_xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue );
+void MPU_vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber );
+UBaseType_t MPU_uxQueueGetQueueNumber( QueueHandle_t xQueue );
+uint8_t MPU_ucQueueGetQueueType( QueueHandle_t xQueue );
+
+/* MPU versions of timers.h API function. */
+TimerHandle_t MPU_xTimerCreate( const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction );
+TimerHandle_t MPU_xTimerCreateStatic( const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction, StaticTimer_t *pxTimerBuffer );
+void * MPU_pvTimerGetTimerID( const TimerHandle_t xTimer );
+void MPU_vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID );
+BaseType_t MPU_xTimerIsTimerActive( TimerHandle_t xTimer );
+TaskHandle_t MPU_xTimerGetTimerDaemonTaskHandle( void );
+BaseType_t MPU_xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait );
+const char * MPU_pcTimerGetName( TimerHandle_t xTimer );
+TickType_t MPU_xTimerGetPeriod( TimerHandle_t xTimer );
+TickType_t MPU_xTimerGetExpiryTime( TimerHandle_t xTimer );
+BaseType_t MPU_xTimerCreateTimerTask( void );
+BaseType_t MPU_xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait );
+
+/* MPU versions of event_group.h API function. */
+EventGroupHandle_t MPU_xEventGroupCreate( void );
+EventGroupHandle_t MPU_xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer );
+EventBits_t MPU_xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait );
+EventBits_t MPU_xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear );
+EventBits_t MPU_xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+EventBits_t MPU_xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait );
+void MPU_vEventGroupDelete( EventGroupHandle_t xEventGroup );
+UBaseType_t MPU_uxEventGroupGetNumber( void* xEventGroup );
+
+#endif /* MPU_PROTOTYPES_H */
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h
new file mode 100644
index 0000000..78f5a9a
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h
@@ -0,0 +1,201 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+#ifndef MPU_WRAPPERS_H
+#define MPU_WRAPPERS_H
+
+/* This file redefines API functions to be called through a wrapper macro, but
+only for ports that are using the MPU. */
+#ifdef portUSING_MPU_WRAPPERS
+
+ /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE will be defined when this file is
+ included from queue.c or task.c to prevent it from having an effect within
+ those files. */
+ #ifndef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+ /*
+ * Map standard (non MPU) API functions to equivalents that start
+ * "MPU_". This will cause the application code to call the MPU_
+ * version, which wraps the non-MPU version with privilege promoting
+ * then demoting code, so the kernel code always runs will full
+ * privileges.
+ */
+
+ /* Map standard tasks.h API functions to the MPU equivalents. */
+ #define xTaskCreate MPU_xTaskCreate
+ #define xTaskCreateStatic MPU_xTaskCreateStatic
+ #define xTaskCreateRestricted MPU_xTaskCreateRestricted
+ #define vTaskAllocateMPURegions MPU_vTaskAllocateMPURegions
+ #define vTaskDelete MPU_vTaskDelete
+ #define vTaskDelay MPU_vTaskDelay
+ #define vTaskDelayUntil MPU_vTaskDelayUntil
+ #define xTaskAbortDelay MPU_xTaskAbortDelay
+ #define uxTaskPriorityGet MPU_uxTaskPriorityGet
+ #define eTaskGetState MPU_eTaskGetState
+ #define vTaskGetInfo MPU_vTaskGetInfo
+ #define vTaskPrioritySet MPU_vTaskPrioritySet
+ #define vTaskSuspend MPU_vTaskSuspend
+ #define vTaskResume MPU_vTaskResume
+ #define vTaskSuspendAll MPU_vTaskSuspendAll
+ #define xTaskResumeAll MPU_xTaskResumeAll
+ #define xTaskGetTickCount MPU_xTaskGetTickCount
+ #define uxTaskGetNumberOfTasks MPU_uxTaskGetNumberOfTasks
+ #define pcTaskGetName MPU_pcTaskGetName
+ #define xTaskGetHandle MPU_xTaskGetHandle
+ #define uxTaskGetStackHighWaterMark MPU_uxTaskGetStackHighWaterMark
+ #define vTaskSetApplicationTaskTag MPU_vTaskSetApplicationTaskTag
+ #define xTaskGetApplicationTaskTag MPU_xTaskGetApplicationTaskTag
+ #define vTaskSetThreadLocalStoragePointer MPU_vTaskSetThreadLocalStoragePointer
+ #define pvTaskGetThreadLocalStoragePointer MPU_pvTaskGetThreadLocalStoragePointer
+ #define xTaskCallApplicationTaskHook MPU_xTaskCallApplicationTaskHook
+ #define xTaskGetIdleTaskHandle MPU_xTaskGetIdleTaskHandle
+ #define uxTaskGetSystemState MPU_uxTaskGetSystemState
+ #define vTaskList MPU_vTaskList
+ #define vTaskGetRunTimeStats MPU_vTaskGetRunTimeStats
+ #define xTaskGenericNotify MPU_xTaskGenericNotify
+ #define xTaskNotifyWait MPU_xTaskNotifyWait
+ #define ulTaskNotifyTake MPU_ulTaskNotifyTake
+ #define xTaskNotifyStateClear MPU_xTaskNotifyStateClear
+
+ #define xTaskGetCurrentTaskHandle MPU_xTaskGetCurrentTaskHandle
+ #define vTaskSetTimeOutState MPU_vTaskSetTimeOutState
+ #define xTaskCheckForTimeOut MPU_xTaskCheckForTimeOut
+ #define xTaskGetSchedulerState MPU_xTaskGetSchedulerState
+
+ /* Map standard queue.h API functions to the MPU equivalents. */
+ #define xQueueGenericSend MPU_xQueueGenericSend
+ #define xQueueGenericReceive MPU_xQueueGenericReceive
+ #define uxQueueMessagesWaiting MPU_uxQueueMessagesWaiting
+ #define uxQueueSpacesAvailable MPU_uxQueueSpacesAvailable
+ #define vQueueDelete MPU_vQueueDelete
+ #define xQueueCreateMutex MPU_xQueueCreateMutex
+ #define xQueueCreateMutexStatic MPU_xQueueCreateMutexStatic
+ #define xQueueCreateCountingSemaphore MPU_xQueueCreateCountingSemaphore
+ #define xQueueCreateCountingSemaphoreStatic MPU_xQueueCreateCountingSemaphoreStatic
+ #define xQueueGetMutexHolder MPU_xQueueGetMutexHolder
+ #define xQueueTakeMutexRecursive MPU_xQueueTakeMutexRecursive
+ #define xQueueGiveMutexRecursive MPU_xQueueGiveMutexRecursive
+ #define xQueueGenericCreate MPU_xQueueGenericCreate
+ #define xQueueGenericCreateStatic MPU_xQueueGenericCreateStatic
+ #define xQueueCreateSet MPU_xQueueCreateSet
+ #define xQueueAddToSet MPU_xQueueAddToSet
+ #define xQueueRemoveFromSet MPU_xQueueRemoveFromSet
+ #define xQueueSelectFromSet MPU_xQueueSelectFromSet
+ #define xQueueGenericReset MPU_xQueueGenericReset
+
+ #if( configQUEUE_REGISTRY_SIZE > 0 )
+ #define vQueueAddToRegistry MPU_vQueueAddToRegistry
+ #define vQueueUnregisterQueue MPU_vQueueUnregisterQueue
+ #define pcQueueGetName MPU_pcQueueGetName
+ #endif
+
+ /* Map standard timer.h API functions to the MPU equivalents. */
+ #define xTimerCreate MPU_xTimerCreate
+ #define xTimerCreateStatic MPU_xTimerCreateStatic
+ #define pvTimerGetTimerID MPU_pvTimerGetTimerID
+ #define vTimerSetTimerID MPU_vTimerSetTimerID
+ #define xTimerIsTimerActive MPU_xTimerIsTimerActive
+ #define xTimerGetTimerDaemonTaskHandle MPU_xTimerGetTimerDaemonTaskHandle
+ #define xTimerPendFunctionCall MPU_xTimerPendFunctionCall
+ #define pcTimerGetName MPU_pcTimerGetName
+ #define xTimerGetPeriod MPU_xTimerGetPeriod
+ #define xTimerGetExpiryTime MPU_xTimerGetExpiryTime
+ #define xTimerGenericCommand MPU_xTimerGenericCommand
+
+ /* Map standard event_group.h API functions to the MPU equivalents. */
+ #define xEventGroupCreate MPU_xEventGroupCreate
+ #define xEventGroupCreateStatic MPU_xEventGroupCreateStatic
+ #define xEventGroupWaitBits MPU_xEventGroupWaitBits
+ #define xEventGroupClearBits MPU_xEventGroupClearBits
+ #define xEventGroupSetBits MPU_xEventGroupSetBits
+ #define xEventGroupSync MPU_xEventGroupSync
+ #define vEventGroupDelete MPU_vEventGroupDelete
+
+ /* Remove the privileged function macro. */
+ #define PRIVILEGED_FUNCTION
+
+ #else /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
+
+ /* Ensure API functions go in the privileged execution section. */
+ #define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions")))
+ #define PRIVILEGED_DATA __attribute__((section("privileged_data")))
+
+ #endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
+
+#else /* portUSING_MPU_WRAPPERS */
+
+ #define PRIVILEGED_FUNCTION
+ #define PRIVILEGED_DATA
+ #define portUSING_MPU_WRAPPERS 0
+
+#endif /* portUSING_MPU_WRAPPERS */
+
+
+#endif /* MPU_WRAPPERS_H */
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/portable.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/portable.h
new file mode 100644
index 0000000..b9f8be3
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/portable.h
@@ -0,0 +1,207 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+/*-----------------------------------------------------------
+ * Portable layer API. Each function must be defined for each port.
+ *----------------------------------------------------------*/
+
+#ifndef PORTABLE_H
+#define PORTABLE_H
+
+/* Each FreeRTOS port has a unique portmacro.h header file. Originally a
+pre-processor definition was used to ensure the pre-processor found the correct
+portmacro.h file for the port being used. That scheme was deprecated in favour
+of setting the compiler's include path such that it found the correct
+portmacro.h file - removing the need for the constant and allowing the
+portmacro.h file to be located anywhere in relation to the port being used.
+Purely for reasons of backward compatibility the old method is still valid, but
+to make it clear that new projects should not use it, support for the port
+specific constants has been moved into the deprecated_definitions.h header
+file. */
+#include "deprecated_definitions.h"
+
+/* If portENTER_CRITICAL is not defined then including deprecated_definitions.h
+did not result in a portmacro.h header file being included - and it should be
+included here. In this case the path to the correct portmacro.h header file
+must be set in the compiler's include path. */
+#ifndef portENTER_CRITICAL
+ #include "portmacro.h"
+#endif
+
+#if portBYTE_ALIGNMENT == 32
+ #define portBYTE_ALIGNMENT_MASK ( 0x001f )
+#endif
+
+#if portBYTE_ALIGNMENT == 16
+ #define portBYTE_ALIGNMENT_MASK ( 0x000f )
+#endif
+
+#if portBYTE_ALIGNMENT == 8
+ #define portBYTE_ALIGNMENT_MASK ( 0x0007 )
+#endif
+
+#if portBYTE_ALIGNMENT == 4
+ #define portBYTE_ALIGNMENT_MASK ( 0x0003 )
+#endif
+
+#if portBYTE_ALIGNMENT == 2
+ #define portBYTE_ALIGNMENT_MASK ( 0x0001 )
+#endif
+
+#if portBYTE_ALIGNMENT == 1
+ #define portBYTE_ALIGNMENT_MASK ( 0x0000 )
+#endif
+
+#ifndef portBYTE_ALIGNMENT_MASK
+ #error "Invalid portBYTE_ALIGNMENT definition"
+#endif
+
+#ifndef portNUM_CONFIGURABLE_REGIONS
+ #define portNUM_CONFIGURABLE_REGIONS 1
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "mpu_wrappers.h"
+
+/*
+ * Setup the stack of a new task so it is ready to be placed under the
+ * scheduler control. The registers have to be placed on the stack in
+ * the order that the port expects to find them.
+ *
+ */
+#if( portUSING_MPU_WRAPPERS == 1 )
+ StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
+#else
+ StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) PRIVILEGED_FUNCTION;
+#endif
+
+/* Used by heap_5.c. */
+typedef struct HeapRegion
+{
+ uint8_t *pucStartAddress;
+ size_t xSizeInBytes;
+} HeapRegion_t;
+
+/*
+ * Used to define multiple heap regions for use by heap_5.c. This function
+ * must be called before any calls to pvPortMalloc() - not creating a task,
+ * queue, semaphore, mutex, software timer, event group, etc. will result in
+ * pvPortMalloc being called.
+ *
+ * pxHeapRegions passes in an array of HeapRegion_t structures - each of which
+ * defines a region of memory that can be used as the heap. The array is
+ * terminated by a HeapRegions_t structure that has a size of 0. The region
+ * with the lowest start address must appear first in the array.
+ */
+void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION;
+
+
+/*
+ * Map to the memory management routines required for the port.
+ */
+void *pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;
+void vPortFree( void *pv ) PRIVILEGED_FUNCTION;
+void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
+size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
+size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Setup the hardware ready for the scheduler to take control. This generally
+ * sets up a tick interrupt and sets timers for the correct tick frequency.
+ */
+BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
+ * the hardware is left in its original condition after the scheduler stops
+ * executing.
+ */
+void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The structures and methods of manipulating the MPU are contained within the
+ * port layer.
+ *
+ * Fills the xMPUSettings structure with the memory region information
+ * contained in xRegions.
+ */
+#if( portUSING_MPU_WRAPPERS == 1 )
+ struct xMEMORY_REGION;
+ void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth ) PRIVILEGED_FUNCTION;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTABLE_H */
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h
new file mode 100644
index 0000000..0b63fd8
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h
@@ -0,0 +1,161 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+#ifndef PROJDEFS_H
+#define PROJDEFS_H
+
+/*
+ * Defines the prototype to which task functions must conform. Defined in this
+ * file to ensure the type is known before portable.h is included.
+ */
+typedef void (*TaskFunction_t)( void * );
+
+/* Converts a time in milliseconds to a time in ticks. This macro can be
+overridden by a macro of the same name defined in FreeRTOSConfig.h in case the
+definition here is not suitable for your application. */
+#ifndef pdMS_TO_TICKS
+ #define pdMS_TO_TICKS( xTimeInMs ) ( ( TickType_t ) ( ( ( TickType_t ) ( xTimeInMs ) * ( TickType_t ) configTICK_RATE_HZ ) / ( TickType_t ) 1000 ) )
+#endif
+
+#define pdFALSE ( ( BaseType_t ) 0 )
+#define pdTRUE ( ( BaseType_t ) 1 )
+
+#define pdPASS ( pdTRUE )
+#define pdFAIL ( pdFALSE )
+#define errQUEUE_EMPTY ( ( BaseType_t ) 0 )
+#define errQUEUE_FULL ( ( BaseType_t ) 0 )
+
+/* FreeRTOS error definitions. */
+#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY ( -1 )
+#define errQUEUE_BLOCKED ( -4 )
+#define errQUEUE_YIELD ( -5 )
+
+/* Macros used for basic data corruption checks. */
+#ifndef configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES
+ #define configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES 0
+#endif
+
+#if( configUSE_16_BIT_TICKS == 1 )
+ #define pdINTEGRITY_CHECK_VALUE 0x5a5a
+#else
+ #define pdINTEGRITY_CHECK_VALUE 0x5a5a5a5aUL
+#endif
+
+/* The following errno values are used by FreeRTOS+ components, not FreeRTOS
+itself. */
+#define pdFREERTOS_ERRNO_NONE 0 /* No errors */
+#define pdFREERTOS_ERRNO_ENOENT 2 /* No such file or directory */
+#define pdFREERTOS_ERRNO_EINTR 4 /* Interrupted system call */
+#define pdFREERTOS_ERRNO_EIO 5 /* I/O error */
+#define pdFREERTOS_ERRNO_ENXIO 6 /* No such device or address */
+#define pdFREERTOS_ERRNO_EBADF 9 /* Bad file number */
+#define pdFREERTOS_ERRNO_EAGAIN 11 /* No more processes */
+#define pdFREERTOS_ERRNO_EWOULDBLOCK 11 /* Operation would block */
+#define pdFREERTOS_ERRNO_ENOMEM 12 /* Not enough memory */
+#define pdFREERTOS_ERRNO_EACCES 13 /* Permission denied */
+#define pdFREERTOS_ERRNO_EFAULT 14 /* Bad address */
+#define pdFREERTOS_ERRNO_EBUSY 16 /* Mount device busy */
+#define pdFREERTOS_ERRNO_EEXIST 17 /* File exists */
+#define pdFREERTOS_ERRNO_EXDEV 18 /* Cross-device link */
+#define pdFREERTOS_ERRNO_ENODEV 19 /* No such device */
+#define pdFREERTOS_ERRNO_ENOTDIR 20 /* Not a directory */
+#define pdFREERTOS_ERRNO_EISDIR 21 /* Is a directory */
+#define pdFREERTOS_ERRNO_EINVAL 22 /* Invalid argument */
+#define pdFREERTOS_ERRNO_ENOSPC 28 /* No space left on device */
+#define pdFREERTOS_ERRNO_ESPIPE 29 /* Illegal seek */
+#define pdFREERTOS_ERRNO_EROFS 30 /* Read only file system */
+#define pdFREERTOS_ERRNO_EUNATCH 42 /* Protocol driver not attached */
+#define pdFREERTOS_ERRNO_EBADE 50 /* Invalid exchange */
+#define pdFREERTOS_ERRNO_EFTYPE 79 /* Inappropriate file type or format */
+#define pdFREERTOS_ERRNO_ENMFILE 89 /* No more files */
+#define pdFREERTOS_ERRNO_ENOTEMPTY 90 /* Directory not empty */
+#define pdFREERTOS_ERRNO_ENAMETOOLONG 91 /* File or path name too long */
+#define pdFREERTOS_ERRNO_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
+#define pdFREERTOS_ERRNO_ENOBUFS 105 /* No buffer space available */
+#define pdFREERTOS_ERRNO_ENOPROTOOPT 109 /* Protocol not available */
+#define pdFREERTOS_ERRNO_EADDRINUSE 112 /* Address already in use */
+#define pdFREERTOS_ERRNO_ETIMEDOUT 116 /* Connection timed out */
+#define pdFREERTOS_ERRNO_EINPROGRESS 119 /* Connection already in progress */
+#define pdFREERTOS_ERRNO_EALREADY 120 /* Socket already connected */
+#define pdFREERTOS_ERRNO_EADDRNOTAVAIL 125 /* Address not available */
+#define pdFREERTOS_ERRNO_EISCONN 127 /* Socket is already connected */
+#define pdFREERTOS_ERRNO_ENOTCONN 128 /* Socket is not connected */
+#define pdFREERTOS_ERRNO_ENOMEDIUM 135 /* No medium inserted */
+#define pdFREERTOS_ERRNO_EILSEQ 138 /* An invalid UTF-16 sequence was encountered. */
+#define pdFREERTOS_ERRNO_ECANCELED 140 /* Operation canceled. */
+
+/* The following endian values are used by FreeRTOS+ components, not FreeRTOS
+itself. */
+#define pdFREERTOS_LITTLE_ENDIAN 0
+#define pdFREERTOS_BIG_ENDIAN 1
+
+#endif /* PROJDEFS_H */
+
+
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/queue.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/queue.h
new file mode 100644
index 0000000..30be360
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/queue.h
@@ -0,0 +1,1798 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+
+#ifndef QUEUE_H
+#define QUEUE_H
+
+#ifndef INC_FREERTOS_H
+ #error "include FreeRTOS.h" must appear in source files before "include queue.h"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/**
+ * Type by which queues are referenced. For example, a call to xQueueCreate()
+ * returns an QueueHandle_t variable that can then be used as a parameter to
+ * xQueueSend(), xQueueReceive(), etc.
+ */
+typedef void * QueueHandle_t;
+
+/**
+ * Type by which queue sets are referenced. For example, a call to
+ * xQueueCreateSet() returns an xQueueSet variable that can then be used as a
+ * parameter to xQueueSelectFromSet(), xQueueAddToSet(), etc.
+ */
+typedef void * QueueSetHandle_t;
+
+/**
+ * Queue sets can contain both queues and semaphores, so the
+ * QueueSetMemberHandle_t is defined as a type to be used where a parameter or
+ * return value can be either an QueueHandle_t or an SemaphoreHandle_t.
+ */
+typedef void * QueueSetMemberHandle_t;
+
+/* For internal use only. */
+#define queueSEND_TO_BACK ( ( BaseType_t ) 0 )
+#define queueSEND_TO_FRONT ( ( BaseType_t ) 1 )
+#define queueOVERWRITE ( ( BaseType_t ) 2 )
+
+/* For internal use only. These definitions *must* match those in queue.c. */
+#define queueQUEUE_TYPE_BASE ( ( uint8_t ) 0U )
+#define queueQUEUE_TYPE_SET ( ( uint8_t ) 0U )
+#define queueQUEUE_TYPE_MUTEX ( ( uint8_t ) 1U )
+#define queueQUEUE_TYPE_COUNTING_SEMAPHORE ( ( uint8_t ) 2U )
+#define queueQUEUE_TYPE_BINARY_SEMAPHORE ( ( uint8_t ) 3U )
+#define queueQUEUE_TYPE_RECURSIVE_MUTEX ( ( uint8_t ) 4U )
+
+/**
+ * queue. h
+ *
+ QueueHandle_t xQueueCreate(
+ UBaseType_t uxQueueLength,
+ UBaseType_t uxItemSize
+ );
+ *
+ *
+ * Creates a new queue instance, and returns a handle by which the new queue
+ * can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, queues use two blocks of
+ * memory. The first block is used to hold the queue's data structures. The
+ * second block is used to hold items placed into the queue. If a queue is
+ * created using xQueueCreate() then both blocks of memory are automatically
+ * dynamically allocated inside the xQueueCreate() function. (see
+ * http://www.freertos.org/a00111.html). If a queue is created using
+ * xQueueCreateStatic() then the application writer must provide the memory that
+ * will get used by the queue. xQueueCreateStatic() therefore allows a queue to
+ * be created without using any dynamic memory allocation.
+ *
+ * http://www.FreeRTOS.org/Embedded-RTOS-Queues.html
+ *
+ * @param uxQueueLength The maximum number of items that the queue can contain.
+ *
+ * @param uxItemSize The number of bytes each item in the queue will require.
+ * Items are queued by copy, not by reference, so this is the number of bytes
+ * that will be copied for each posted item. Each item on the queue must be
+ * the same size.
+ *
+ * @return If the queue is successfully create then a handle to the newly
+ * created queue is returned. If the queue cannot be created then 0 is
+ * returned.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ };
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+
+ // Create a queue capable of containing 10 uint32_t values.
+ xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+ if( xQueue1 == 0 )
+ {
+ // Queue was not created and must not be used.
+ }
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+ if( xQueue2 == 0 )
+ {
+ // Queue was not created and must not be used.
+ }
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueCreate xQueueCreate
+ * \ingroup QueueManagement
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ #define xQueueCreate( uxQueueLength, uxItemSize ) xQueueGenericCreate( ( uxQueueLength ), ( uxItemSize ), ( queueQUEUE_TYPE_BASE ) )
+#endif
+
+/**
+ * queue. h
+ *
+ QueueHandle_t xQueueCreateStatic(
+ UBaseType_t uxQueueLength,
+ UBaseType_t uxItemSize,
+ uint8_t *pucQueueStorageBuffer,
+ StaticQueue_t *pxQueueBuffer
+ );
+ *
+ *
+ * Creates a new queue instance, and returns a handle by which the new queue
+ * can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, queues use two blocks of
+ * memory. The first block is used to hold the queue's data structures. The
+ * second block is used to hold items placed into the queue. If a queue is
+ * created using xQueueCreate() then both blocks of memory are automatically
+ * dynamically allocated inside the xQueueCreate() function. (see
+ * http://www.freertos.org/a00111.html). If a queue is created using
+ * xQueueCreateStatic() then the application writer must provide the memory that
+ * will get used by the queue. xQueueCreateStatic() therefore allows a queue to
+ * be created without using any dynamic memory allocation.
+ *
+ * http://www.FreeRTOS.org/Embedded-RTOS-Queues.html
+ *
+ * @param uxQueueLength The maximum number of items that the queue can contain.
+ *
+ * @param uxItemSize The number of bytes each item in the queue will require.
+ * Items are queued by copy, not by reference, so this is the number of bytes
+ * that will be copied for each posted item. Each item on the queue must be
+ * the same size.
+ *
+ * @param pucQueueStorageBuffer If uxItemSize is not zero then
+ * pucQueueStorageBuffer must point to a uint8_t array that is at least large
+ * enough to hold the maximum number of items that can be in the queue at any
+ * one time - which is ( uxQueueLength * uxItemsSize ) bytes. If uxItemSize is
+ * zero then pucQueueStorageBuffer can be NULL.
+ *
+ * @param pxQueueBuffer Must point to a variable of type StaticQueue_t, which
+ * will be used to hold the queue's data structure.
+ *
+ * @return If the queue is created then a handle to the created queue is
+ * returned. If pxQueueBuffer is NULL then NULL is returned.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ };
+
+ #define QUEUE_LENGTH 10
+ #define ITEM_SIZE sizeof( uint32_t )
+
+ // xQueueBuffer will hold the queue structure.
+ StaticQueue_t xQueueBuffer;
+
+ // ucQueueStorage will hold the items posted to the queue. Must be at least
+ // [(queue length) * ( queue item size)] bytes long.
+ uint8_t ucQueueStorage[ QUEUE_LENGTH * ITEM_SIZE ];
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1;
+
+ // Create a queue capable of containing 10 uint32_t values.
+ xQueue1 = xQueueCreate( QUEUE_LENGTH, // The number of items the queue can hold.
+ ITEM_SIZE // The size of each item in the queue
+ &( ucQueueStorage[ 0 ] ), // The buffer that will hold the items in the queue.
+ &xQueueBuffer ); // The buffer that will hold the queue structure.
+
+ // The queue is guaranteed to be created successfully as no dynamic memory
+ // allocation is used. Therefore xQueue1 is now a handle to a valid queue.
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueCreateStatic xQueueCreateStatic
+ * \ingroup QueueManagement
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ #define xQueueCreateStatic( uxQueueLength, uxItemSize, pucQueueStorage, pxQueueBuffer ) xQueueGenericCreateStatic( ( uxQueueLength ), ( uxItemSize ), ( pucQueueStorage ), ( pxQueueBuffer ), ( queueQUEUE_TYPE_BASE ) )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueSendToToFront(
+ QueueHandle_t xQueue,
+ const void *pvItemToQueue,
+ TickType_t xTicksToWait
+ );
+ *
+ *
+ * This is a macro that calls xQueueGenericSend().
+ *
+ * Post an item to the front of a queue. The item is queued by copy, not by
+ * reference. This function must not be called from an interrupt service
+ * routine. See xQueueSendFromISR () for an alternative which may be used
+ * in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full. The call will return immediately if this is set to 0 and the
+ * queue is full. The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 uint32_t values.
+ xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+ // ...
+
+ if( xQueue1 != 0 )
+ {
+ // Send an uint32_t. Wait for 10 ticks for space to become
+ // available if necessary.
+ if( xQueueSendToFront( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+ {
+ // Failed to post the message, even after 10 ticks.
+ }
+ }
+
+ if( xQueue2 != 0 )
+ {
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSendToFront( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+ }
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_FRONT )
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueSendToBack(
+ QueueHandle_t xQueue,
+ const void *pvItemToQueue,
+ TickType_t xTicksToWait
+ );
+ *
+ *
+ * This is a macro that calls xQueueGenericSend().
+ *
+ * Post an item to the back of a queue. The item is queued by copy, not by
+ * reference. This function must not be called from an interrupt service
+ * routine. See xQueueSendFromISR () for an alternative which may be used
+ * in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full. The call will return immediately if this is set to 0 and the queue
+ * is full. The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 uint32_t values.
+ xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+ // ...
+
+ if( xQueue1 != 0 )
+ {
+ // Send an uint32_t. Wait for 10 ticks for space to become
+ // available if necessary.
+ if( xQueueSendToBack( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+ {
+ // Failed to post the message, even after 10 ticks.
+ }
+ }
+
+ if( xQueue2 != 0 )
+ {
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSendToBack( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+ }
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueSend(
+ QueueHandle_t xQueue,
+ const void * pvItemToQueue,
+ TickType_t xTicksToWait
+ );
+ *
+ *
+ * This is a macro that calls xQueueGenericSend(). It is included for
+ * backward compatibility with versions of FreeRTOS.org that did not
+ * include the xQueueSendToFront() and xQueueSendToBack() macros. It is
+ * equivalent to xQueueSendToBack().
+ *
+ * Post an item on a queue. The item is queued by copy, not by reference.
+ * This function must not be called from an interrupt service routine.
+ * See xQueueSendFromISR () for an alternative which may be used in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full. The call will return immediately if this is set to 0 and the
+ * queue is full. The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 uint32_t values.
+ xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+ // ...
+
+ if( xQueue1 != 0 )
+ {
+ // Send an uint32_t. Wait for 10 ticks for space to become
+ // available if necessary.
+ if( xQueueSend( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+ {
+ // Failed to post the message, even after 10 ticks.
+ }
+ }
+
+ if( xQueue2 != 0 )
+ {
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSend( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+ }
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueOverwrite(
+ QueueHandle_t xQueue,
+ const void * pvItemToQueue
+ );
+ *
+ *
+ * Only for use with queues that have a length of one - so the queue is either
+ * empty or full.
+ *
+ * Post an item on a queue. If the queue is already full then overwrite the
+ * value held in the queue. The item is queued by copy, not by reference.
+ *
+ * This function must not be called from an interrupt service routine.
+ * See xQueueOverwriteFromISR () for an alternative which may be used in an ISR.
+ *
+ * @param xQueue The handle of the queue to which the data is being sent.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @return xQueueOverwrite() is a macro that calls xQueueGenericSend(), and
+ * therefore has the same return values as xQueueSendToFront(). However, pdPASS
+ * is the only value that can be returned because xQueueOverwrite() will write
+ * to the queue even when the queue is already full.
+ *
+ * Example usage:
+
+
+ void vFunction( void *pvParameters )
+ {
+ QueueHandle_t xQueue;
+ uint32_t ulVarToSend, ulValReceived;
+
+ // Create a queue to hold one uint32_t value. It is strongly
+ // recommended *not* to use xQueueOverwrite() on queues that can
+ // contain more than one value, and doing so will trigger an assertion
+ // if configASSERT() is defined.
+ xQueue = xQueueCreate( 1, sizeof( uint32_t ) );
+
+ // Write the value 10 to the queue using xQueueOverwrite().
+ ulVarToSend = 10;
+ xQueueOverwrite( xQueue, &ulVarToSend );
+
+ // Peeking the queue should now return 10, but leave the value 10 in
+ // the queue. A block time of zero is used as it is known that the
+ // queue holds a value.
+ ulValReceived = 0;
+ xQueuePeek( xQueue, &ulValReceived, 0 );
+
+ if( ulValReceived != 10 )
+ {
+ // Error unless the item was removed by a different task.
+ }
+
+ // The queue is still full. Use xQueueOverwrite() to overwrite the
+ // value held in the queue with 100.
+ ulVarToSend = 100;
+ xQueueOverwrite( xQueue, &ulVarToSend );
+
+ // This time read from the queue, leaving the queue empty once more.
+ // A block time of 0 is used again.
+ xQueueReceive( xQueue, &ulValReceived, 0 );
+
+ // The value read should be the last value written, even though the
+ // queue was already full when the value was written.
+ if( ulValReceived != 100 )
+ {
+ // Error!
+ }
+
+ // ...
+}
+
+ * \defgroup xQueueOverwrite xQueueOverwrite
+ * \ingroup QueueManagement
+ */
+#define xQueueOverwrite( xQueue, pvItemToQueue ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), 0, queueOVERWRITE )
+
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueGenericSend(
+ QueueHandle_t xQueue,
+ const void * pvItemToQueue,
+ TickType_t xTicksToWait
+ BaseType_t xCopyPosition
+ );
+ *
+ *
+ * It is preferred that the macros xQueueSend(), xQueueSendToFront() and
+ * xQueueSendToBack() are used in place of calling this function directly.
+ *
+ * Post an item on a queue. The item is queued by copy, not by reference.
+ * This function must not be called from an interrupt service routine.
+ * See xQueueSendFromISR () for an alternative which may be used in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full. The call will return immediately if this is set to 0 and the
+ * queue is full. The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ *
+ * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the
+ * item at the back of the queue, or queueSEND_TO_FRONT to place the item
+ * at the front of the queue (for high priority messages).
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 uint32_t values.
+ xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+ // ...
+
+ if( xQueue1 != 0 )
+ {
+ // Send an uint32_t. Wait for 10 ticks for space to become
+ // available if necessary.
+ if( xQueueGenericSend( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10, queueSEND_TO_BACK ) != pdPASS )
+ {
+ // Failed to post the message, even after 10 ticks.
+ }
+ }
+
+ if( xQueue2 != 0 )
+ {
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueGenericSend( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0, queueSEND_TO_BACK );
+ }
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueuePeek(
+ QueueHandle_t xQueue,
+ void *pvBuffer,
+ TickType_t xTicksToWait
+ );
+ *
+ * This is a macro that calls the xQueueGenericReceive() function.
+ *
+ * Receive an item from a queue without removing the item from the queue.
+ * The item is received by copy so a buffer of adequate size must be
+ * provided. The number of bytes copied into the buffer was defined when
+ * the queue was created.
+ *
+ * Successfully received items remain on the queue so will be returned again
+ * by the next call, or a call to xQueueReceive().
+ *
+ * This macro must not be used in an interrupt service routine. See
+ * xQueuePeekFromISR() for an alternative that can be called from an interrupt
+ * service routine.
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for an item to receive should the queue be empty at the time
+ * of the call. The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ * xQueuePeek() will return immediately if xTicksToWait is 0 and the queue
+ * is empty.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ QueueHandle_t xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+ if( xQueue == 0 )
+ {
+ // Failed to create the queue.
+ }
+
+ // ...
+
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
+
+ // ... Rest of task code.
+ }
+
+ // Task to peek the data from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+ if( xQueue != 0 )
+ {
+ // Peek a message on the created queue. Block for 10 ticks if a
+ // message is not immediately available.
+ if( xQueuePeek( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
+ {
+ // pcRxedMessage now points to the struct AMessage variable posted
+ // by vATask, but the item still remains on the queue.
+ }
+ }
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueReceive xQueueReceive
+ * \ingroup QueueManagement
+ */
+#define xQueuePeek( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdTRUE )
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueuePeekFromISR(
+ QueueHandle_t xQueue,
+ void *pvBuffer,
+ );
+ *
+ * A version of xQueuePeek() that can be called from an interrupt service
+ * routine (ISR).
+ *
+ * Receive an item from a queue without removing the item from the queue.
+ * The item is received by copy so a buffer of adequate size must be
+ * provided. The number of bytes copied into the buffer was defined when
+ * the queue was created.
+ *
+ * Successfully received items remain on the queue so will be returned again
+ * by the next call, or a call to xQueueReceive().
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * \defgroup xQueuePeekFromISR xQueuePeekFromISR
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue, void * const pvBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueReceive(
+ QueueHandle_t xQueue,
+ void *pvBuffer,
+ TickType_t xTicksToWait
+ );
+ *
+ * This is a macro that calls the xQueueGenericReceive() function.
+ *
+ * Receive an item from a queue. The item is received by copy so a buffer of
+ * adequate size must be provided. The number of bytes copied into the buffer
+ * was defined when the queue was created.
+ *
+ * Successfully received items are removed from the queue.
+ *
+ * This function must not be used in an interrupt service routine. See
+ * xQueueReceiveFromISR for an alternative that can.
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for an item to receive should the queue be empty at the time
+ * of the call. xQueueReceive() will return immediately if xTicksToWait
+ * is zero and the queue is empty. The time is defined in tick periods so the
+ * constant portTICK_PERIOD_MS should be used to convert to real time if this is
+ * required.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ QueueHandle_t xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+ if( xQueue == 0 )
+ {
+ // Failed to create the queue.
+ }
+
+ // ...
+
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
+
+ // ... Rest of task code.
+ }
+
+ // Task to receive from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+ if( xQueue != 0 )
+ {
+ // Receive a message on the created queue. Block for 10 ticks if a
+ // message is not immediately available.
+ if( xQueueReceive( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
+ {
+ // pcRxedMessage now points to the struct AMessage variable posted
+ // by vATask.
+ }
+ }
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueReceive xQueueReceive
+ * \ingroup QueueManagement
+ */
+#define xQueueReceive( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdFALSE )
+
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueGenericReceive(
+ QueueHandle_t xQueue,
+ void *pvBuffer,
+ TickType_t xTicksToWait
+ BaseType_t xJustPeek
+ );
+ *
+ * It is preferred that the macro xQueueReceive() be used rather than calling
+ * this function directly.
+ *
+ * Receive an item from a queue. The item is received by copy so a buffer of
+ * adequate size must be provided. The number of bytes copied into the buffer
+ * was defined when the queue was created.
+ *
+ * This function must not be used in an interrupt service routine. See
+ * xQueueReceiveFromISR for an alternative that can.
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for an item to receive should the queue be empty at the time
+ * of the call. The time is defined in tick periods so the constant
+ * portTICK_PERIOD_MS should be used to convert to real time if this is required.
+ * xQueueGenericReceive() will return immediately if the queue is empty and
+ * xTicksToWait is 0.
+ *
+ * @param xJustPeek When set to true, the item received from the queue is not
+ * actually removed from the queue - meaning a subsequent call to
+ * xQueueReceive() will return the same item. When set to false, the item
+ * being received from the queue is also removed from the queue.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ QueueHandle_t xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+ if( xQueue == 0 )
+ {
+ // Failed to create the queue.
+ }
+
+ // ...
+
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
+
+ // ... Rest of task code.
+ }
+
+ // Task to receive from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+ if( xQueue != 0 )
+ {
+ // Receive a message on the created queue. Block for 10 ticks if a
+ // message is not immediately available.
+ if( xQueueGenericReceive( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
+ {
+ // pcRxedMessage now points to the struct AMessage variable posted
+ // by vATask.
+ }
+ }
+
+ // ... Rest of task code.
+ }
+
+ * \defgroup xQueueReceive xQueueReceive
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueueGenericReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait, const BaseType_t xJustPeek ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue );
+ *
+ * Return the number of messages stored in a queue.
+ *
+ * @param xQueue A handle to the queue being queried.
+ *
+ * @return The number of messages available in the queue.
+ *
+ * \defgroup uxQueueMessagesWaiting uxQueueMessagesWaiting
+ * \ingroup QueueManagement
+ */
+UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue );
+ *
+ * Return the number of free spaces available in a queue. This is equal to the
+ * number of items that can be sent to the queue before the queue becomes full
+ * if no items are removed.
+ *
+ * @param xQueue A handle to the queue being queried.
+ *
+ * @return The number of spaces available in the queue.
+ *
+ * \defgroup uxQueueMessagesWaiting uxQueueMessagesWaiting
+ * \ingroup QueueManagement
+ */
+UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ * void vQueueDelete( QueueHandle_t xQueue );
+ *
+ * Delete a queue - freeing all the memory allocated for storing of items
+ * placed on the queue.
+ *
+ * @param xQueue A handle to the queue to be deleted.
+ *
+ * \defgroup vQueueDelete vQueueDelete
+ * \ingroup QueueManagement
+ */
+void vQueueDelete( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueSendToFrontFromISR(
+ QueueHandle_t xQueue,
+ const void *pvItemToQueue,
+ BaseType_t *pxHigherPriorityTaskWoken
+ );
+
+ *
+ * This is a macro that calls xQueueGenericSendFromISR().
+ *
+ * Post an item to the front of a queue. It is safe to use this macro from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR. In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendToFrontFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueSendToFromFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPrioritTaskWoken;
+
+ // We have not woken a task at the start of the ISR.
+ xHigherPriorityTaskWoken = pdFALSE;
+
+ // Loop until the buffer is empty.
+ do
+ {
+ // Obtain a byte from the buffer.
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+ // Post the byte.
+ xQueueSendToFrontFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+ // Now the buffer is empty we can switch context if necessary.
+ if( xHigherPriorityTaskWoken )
+ {
+ taskYIELD ();
+ }
+ }
+
+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToFrontFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_FRONT )
+
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueSendToBackFromISR(
+ QueueHandle_t xQueue,
+ const void *pvItemToQueue,
+ BaseType_t *pxHigherPriorityTaskWoken
+ );
+
+ *
+ * This is a macro that calls xQueueGenericSendFromISR().
+ *
+ * Post an item to the back of a queue. It is safe to use this macro from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR. In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendToBackFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueSendToBackFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWoken;
+
+ // We have not woken a task at the start of the ISR.
+ xHigherPriorityTaskWoken = pdFALSE;
+
+ // Loop until the buffer is empty.
+ do
+ {
+ // Obtain a byte from the buffer.
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+ // Post the byte.
+ xQueueSendToBackFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+ // Now the buffer is empty we can switch context if necessary.
+ if( xHigherPriorityTaskWoken )
+ {
+ taskYIELD ();
+ }
+ }
+
+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToBackFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueOverwriteFromISR(
+ QueueHandle_t xQueue,
+ const void * pvItemToQueue,
+ BaseType_t *pxHigherPriorityTaskWoken
+ );
+ *
+ *
+ * A version of xQueueOverwrite() that can be used in an interrupt service
+ * routine (ISR).
+ *
+ * Only for use with queues that can hold a single item - so the queue is either
+ * empty or full.
+ *
+ * Post an item on a queue. If the queue is already full then overwrite the
+ * value held in the queue. The item is queued by copy, not by reference.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueOverwriteFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueOverwriteFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return xQueueOverwriteFromISR() is a macro that calls
+ * xQueueGenericSendFromISR(), and therefore has the same return values as
+ * xQueueSendToFrontFromISR(). However, pdPASS is the only value that can be
+ * returned because xQueueOverwriteFromISR() will write to the queue even when
+ * the queue is already full.
+ *
+ * Example usage:
+
+
+ QueueHandle_t xQueue;
+
+ void vFunction( void *pvParameters )
+ {
+ // Create a queue to hold one uint32_t value. It is strongly
+ // recommended *not* to use xQueueOverwriteFromISR() on queues that can
+ // contain more than one value, and doing so will trigger an assertion
+ // if configASSERT() is defined.
+ xQueue = xQueueCreate( 1, sizeof( uint32_t ) );
+}
+
+void vAnInterruptHandler( void )
+{
+// xHigherPriorityTaskWoken must be set to pdFALSE before it is used.
+BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+uint32_t ulVarToSend, ulValReceived;
+
+ // Write the value 10 to the queue using xQueueOverwriteFromISR().
+ ulVarToSend = 10;
+ xQueueOverwriteFromISR( xQueue, &ulVarToSend, &xHigherPriorityTaskWoken );
+
+ // The queue is full, but calling xQueueOverwriteFromISR() again will still
+ // pass because the value held in the queue will be overwritten with the
+ // new value.
+ ulVarToSend = 100;
+ xQueueOverwriteFromISR( xQueue, &ulVarToSend, &xHigherPriorityTaskWoken );
+
+ // Reading from the queue will now return 100.
+
+ // ...
+
+ if( xHigherPrioritytaskWoken == pdTRUE )
+ {
+ // Writing to the queue caused a task to unblock and the unblocked task
+ // has a priority higher than or equal to the priority of the currently
+ // executing task (the task this interrupt interrupted). Perform a context
+ // switch so this interrupt returns directly to the unblocked task.
+ portYIELD_FROM_ISR(); // or portEND_SWITCHING_ISR() depending on the port.
+ }
+}
+
+ * \defgroup xQueueOverwriteFromISR xQueueOverwriteFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueOverwriteFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueOVERWRITE )
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueSendFromISR(
+ QueueHandle_t xQueue,
+ const void *pvItemToQueue,
+ BaseType_t *pxHigherPriorityTaskWoken
+ );
+
+ *
+ * This is a macro that calls xQueueGenericSendFromISR(). It is included
+ * for backward compatibility with versions of FreeRTOS.org that did not
+ * include the xQueueSendToBackFromISR() and xQueueSendToFrontFromISR()
+ * macros.
+ *
+ * Post an item to the back of a queue. It is safe to use this function from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR. In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueSendFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWoken;
+
+ // We have not woken a task at the start of the ISR.
+ xHigherPriorityTaskWoken = pdFALSE;
+
+ // Loop until the buffer is empty.
+ do
+ {
+ // Obtain a byte from the buffer.
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+ // Post the byte.
+ xQueueSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+ // Now the buffer is empty we can switch context if necessary.
+ if( xHigherPriorityTaskWoken )
+ {
+ // Actual macro used here is port specific.
+ portYIELD_FROM_ISR ();
+ }
+ }
+
+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueGenericSendFromISR(
+ QueueHandle_t xQueue,
+ const void *pvItemToQueue,
+ BaseType_t *pxHigherPriorityTaskWoken,
+ BaseType_t xCopyPosition
+ );
+
+ *
+ * It is preferred that the macros xQueueSendFromISR(),
+ * xQueueSendToFrontFromISR() and xQueueSendToBackFromISR() be used in place
+ * of calling this function directly. xQueueGiveFromISR() is an
+ * equivalent for use by semaphores that don't actually copy any data.
+ *
+ * Post an item on a queue. It is safe to use this function from within an
+ * interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR. In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueGenericSendFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueGenericSendFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the
+ * item at the back of the queue, or queueSEND_TO_FRONT to place the item
+ * at the front of the queue (for high priority messages).
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWokenByPost;
+
+ // We have not woken a task at the start of the ISR.
+ xHigherPriorityTaskWokenByPost = pdFALSE;
+
+ // Loop until the buffer is empty.
+ do
+ {
+ // Obtain a byte from the buffer.
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+ // Post each byte.
+ xQueueGenericSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWokenByPost, queueSEND_TO_BACK );
+
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+ // Now the buffer is empty we can switch context if necessary. Note that the
+ // name of the yield function required is port specific.
+ if( xHigherPriorityTaskWokenByPost )
+ {
+ taskYIELD_YIELD_FROM_ISR();
+ }
+ }
+
+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueueGenericSendFromISR( QueueHandle_t xQueue, const void * const pvItemToQueue, BaseType_t * const pxHigherPriorityTaskWoken, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/**
+ * queue. h
+ *
+ BaseType_t xQueueReceiveFromISR(
+ QueueHandle_t xQueue,
+ void *pvBuffer,
+ BaseType_t *pxTaskWoken
+ );
+ *
+ *
+ * Receive an item from a queue. It is safe to use this function from within an
+ * interrupt service routine.
+ *
+ * @param xQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param pxTaskWoken A task may be blocked waiting for space to become
+ * available on the queue. If xQueueReceiveFromISR causes such a task to
+ * unblock *pxTaskWoken will get set to pdTRUE, otherwise *pxTaskWoken will
+ * remain unchanged.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+
+
+ QueueHandle_t xQueue;
+
+ // Function to create a queue and post some values.
+ void vAFunction( void *pvParameters )
+ {
+ char cValueToPost;
+ const TickType_t xTicksToWait = ( TickType_t )0xff;
+
+ // Create a queue capable of containing 10 characters.
+ xQueue = xQueueCreate( 10, sizeof( char ) );
+ if( xQueue == 0 )
+ {
+ // Failed to create the queue.
+ }
+
+ // ...
+
+ // Post some characters that will be used within an ISR. If the queue
+ // is full then this task will block for xTicksToWait ticks.
+ cValueToPost = 'a';
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+ cValueToPost = 'b';
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+
+ // ... keep posting characters ... this task may block when the queue
+ // becomes full.
+
+ cValueToPost = 'c';
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+ }
+
+ // ISR that outputs all the characters received on the queue.
+ void vISR_Routine( void )
+ {
+ BaseType_t xTaskWokenByReceive = pdFALSE;
+ char cRxedChar;
+
+ while( xQueueReceiveFromISR( xQueue, ( void * ) &cRxedChar, &xTaskWokenByReceive) )
+ {
+ // A character was received. Output the character now.
+ vOutputCharacter( cRxedChar );
+
+ // If removing the character from the queue woke the task that was
+ // posting onto the queue cTaskWokenByReceive will have been set to
+ // pdTRUE. No matter how many times this loop iterates only one
+ // task will be woken.
+ }
+
+ if( cTaskWokenByPost != ( char ) pdFALSE;
+ {
+ taskYIELD ();
+ }
+ }
+
+ * \defgroup xQueueReceiveFromISR xQueueReceiveFromISR
+ * \ingroup QueueManagement
+ */
+BaseType_t xQueueReceiveFromISR( QueueHandle_t xQueue, void * const pvBuffer, BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/*
+ * Utilities to query queues that are safe to use from an ISR. These utilities
+ * should be used only from witin an ISR, or within a critical section.
+ */
+BaseType_t xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueIsQueueFullFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+UBaseType_t uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * The functions defined above are for passing data to and from tasks. The
+ * functions below are the equivalents for passing data to and from
+ * co-routines.
+ *
+ * These functions are called from the co-routine macro implementation and
+ * should not be called directly from application code. Instead use the macro
+ * wrappers defined within croutine.h.
+ */
+BaseType_t xQueueCRSendFromISR( QueueHandle_t xQueue, const void *pvItemToQueue, BaseType_t xCoRoutinePreviouslyWoken );
+BaseType_t xQueueCRReceiveFromISR( QueueHandle_t xQueue, void *pvBuffer, BaseType_t *pxTaskWoken );
+BaseType_t xQueueCRSend( QueueHandle_t xQueue, const void *pvItemToQueue, TickType_t xTicksToWait );
+BaseType_t xQueueCRReceive( QueueHandle_t xQueue, void *pvBuffer, TickType_t xTicksToWait );
+
+/*
+ * For internal use only. Use xSemaphoreCreateMutex(),
+ * xSemaphoreCreateCounting() or xSemaphoreGetMutexHolder() instead of calling
+ * these functions directly.
+ */
+QueueHandle_t xQueueCreateMutex( const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount ) PRIVILEGED_FUNCTION;
+QueueHandle_t xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue ) PRIVILEGED_FUNCTION;
+void* xQueueGetMutexHolder( QueueHandle_t xSemaphore ) PRIVILEGED_FUNCTION;
+
+/*
+ * For internal use only. Use xSemaphoreTakeMutexRecursive() or
+ * xSemaphoreGiveMutexRecursive() instead of calling these functions directly.
+ */
+BaseType_t xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex ) PRIVILEGED_FUNCTION;
+
+/*
+ * Reset a queue back to its original empty state. The return value is now
+ * obsolete and is always set to pdPASS.
+ */
+#define xQueueReset( xQueue ) xQueueGenericReset( xQueue, pdFALSE )
+
+/*
+ * The registry is provided as a means for kernel aware debuggers to
+ * locate queues, semaphores and mutexes. Call vQueueAddToRegistry() add
+ * a queue, semaphore or mutex handle to the registry if you want the handle
+ * to be available to a kernel aware debugger. If you are not using a kernel
+ * aware debugger then this function can be ignored.
+ *
+ * configQUEUE_REGISTRY_SIZE defines the maximum number of handles the
+ * registry can hold. configQUEUE_REGISTRY_SIZE must be greater than 0
+ * within FreeRTOSConfig.h for the registry to be available. Its value
+ * does not effect the number of queues, semaphores and mutexes that can be
+ * created - just the number that the registry can hold.
+ *
+ * @param xQueue The handle of the queue being added to the registry. This
+ * is the handle returned by a call to xQueueCreate(). Semaphore and mutex
+ * handles can also be passed in here.
+ *
+ * @param pcName The name to be associated with the handle. This is the
+ * name that the kernel aware debugger will display. The queue registry only
+ * stores a pointer to the string - so the string must be persistent (global or
+ * preferably in ROM/Flash), not on the stack.
+ */
+#if( configQUEUE_REGISTRY_SIZE > 0 )
+ void vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcName ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif
+
+/*
+ * The registry is provided as a means for kernel aware debuggers to
+ * locate queues, semaphores and mutexes. Call vQueueAddToRegistry() add
+ * a queue, semaphore or mutex handle to the registry if you want the handle
+ * to be available to a kernel aware debugger, and vQueueUnregisterQueue() to
+ * remove the queue, semaphore or mutex from the register. If you are not using
+ * a kernel aware debugger then this function can be ignored.
+ *
+ * @param xQueue The handle of the queue being removed from the registry.
+ */
+#if( configQUEUE_REGISTRY_SIZE > 0 )
+ void vQueueUnregisterQueue( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * The queue registry is provided as a means for kernel aware debuggers to
+ * locate queues, semaphores and mutexes. Call pcQueueGetName() to look
+ * up and return the name of a queue in the queue registry from the queue's
+ * handle.
+ *
+ * @param xQueue The handle of the queue the name of which will be returned.
+ * @return If the queue is in the registry then a pointer to the name of the
+ * queue is returned. If the queue is not in the registry then NULL is
+ * returned.
+ */
+#if( configQUEUE_REGISTRY_SIZE > 0 )
+ const char *pcQueueGetName( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif
+
+/*
+ * Generic version of the function used to creaet a queue using dynamic memory
+ * allocation. This is called by other functions and macros that create other
+ * RTOS objects that use the queue structure as their base.
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ QueueHandle_t xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * Generic version of the function used to creaet a queue using dynamic memory
+ * allocation. This is called by other functions and macros that create other
+ * RTOS objects that use the queue structure as their base.
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ QueueHandle_t xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * Queue sets provide a mechanism to allow a task to block (pend) on a read
+ * operation from multiple queues or semaphores simultaneously.
+ *
+ * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this
+ * function.
+ *
+ * A queue set must be explicitly created using a call to xQueueCreateSet()
+ * before it can be used. Once created, standard FreeRTOS queues and semaphores
+ * can be added to the set using calls to xQueueAddToSet().
+ * xQueueSelectFromSet() is then used to determine which, if any, of the queues
+ * or semaphores contained in the set is in a state where a queue read or
+ * semaphore take operation would be successful.
+ *
+ * Note 1: See the documentation on http://wwwFreeRTOS.org/RTOS-queue-sets.html
+ * for reasons why queue sets are very rarely needed in practice as there are
+ * simpler methods of blocking on multiple objects.
+ *
+ * Note 2: Blocking on a queue set that contains a mutex will not cause the
+ * mutex holder to inherit the priority of the blocked task.
+ *
+ * Note 3: An additional 4 bytes of RAM is required for each space in a every
+ * queue added to a queue set. Therefore counting semaphores that have a high
+ * maximum count value should not be added to a queue set.
+ *
+ * Note 4: A receive (in the case of a queue) or take (in the case of a
+ * semaphore) operation must not be performed on a member of a queue set unless
+ * a call to xQueueSelectFromSet() has first returned a handle to that set member.
+ *
+ * @param uxEventQueueLength Queue sets store events that occur on
+ * the queues and semaphores contained in the set. uxEventQueueLength specifies
+ * the maximum number of events that can be queued at once. To be absolutely
+ * certain that events are not lost uxEventQueueLength should be set to the
+ * total sum of the length of the queues added to the set, where binary
+ * semaphores and mutexes have a length of 1, and counting semaphores have a
+ * length set by their maximum count value. Examples:
+ * + If a queue set is to hold a queue of length 5, another queue of length 12,
+ * and a binary semaphore, then uxEventQueueLength should be set to
+ * (5 + 12 + 1), or 18.
+ * + If a queue set is to hold three binary semaphores then uxEventQueueLength
+ * should be set to (1 + 1 + 1 ), or 3.
+ * + If a queue set is to hold a counting semaphore that has a maximum count of
+ * 5, and a counting semaphore that has a maximum count of 3, then
+ * uxEventQueueLength should be set to (5 + 3), or 8.
+ *
+ * @return If the queue set is created successfully then a handle to the created
+ * queue set is returned. Otherwise NULL is returned.
+ */
+QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQueueLength ) PRIVILEGED_FUNCTION;
+
+/*
+ * Adds a queue or semaphore to a queue set that was previously created by a
+ * call to xQueueCreateSet().
+ *
+ * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this
+ * function.
+ *
+ * Note 1: A receive (in the case of a queue) or take (in the case of a
+ * semaphore) operation must not be performed on a member of a queue set unless
+ * a call to xQueueSelectFromSet() has first returned a handle to that set member.
+ *
+ * @param xQueueOrSemaphore The handle of the queue or semaphore being added to
+ * the queue set (cast to an QueueSetMemberHandle_t type).
+ *
+ * @param xQueueSet The handle of the queue set to which the queue or semaphore
+ * is being added.
+ *
+ * @return If the queue or semaphore was successfully added to the queue set
+ * then pdPASS is returned. If the queue could not be successfully added to the
+ * queue set because it is already a member of a different queue set then pdFAIL
+ * is returned.
+ */
+BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
+
+/*
+ * Removes a queue or semaphore from a queue set. A queue or semaphore can only
+ * be removed from a set if the queue or semaphore is empty.
+ *
+ * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this
+ * function.
+ *
+ * @param xQueueOrSemaphore The handle of the queue or semaphore being removed
+ * from the queue set (cast to an QueueSetMemberHandle_t type).
+ *
+ * @param xQueueSet The handle of the queue set in which the queue or semaphore
+ * is included.
+ *
+ * @return If the queue or semaphore was successfully removed from the queue set
+ * then pdPASS is returned. If the queue was not in the queue set, or the
+ * queue (or semaphore) was not empty, then pdFAIL is returned.
+ */
+BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
+
+/*
+ * xQueueSelectFromSet() selects from the members of a queue set a queue or
+ * semaphore that either contains data (in the case of a queue) or is available
+ * to take (in the case of a semaphore). xQueueSelectFromSet() effectively
+ * allows a task to block (pend) on a read operation on all the queues and
+ * semaphores in a queue set simultaneously.
+ *
+ * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this
+ * function.
+ *
+ * Note 1: See the documentation on http://wwwFreeRTOS.org/RTOS-queue-sets.html
+ * for reasons why queue sets are very rarely needed in practice as there are
+ * simpler methods of blocking on multiple objects.
+ *
+ * Note 2: Blocking on a queue set that contains a mutex will not cause the
+ * mutex holder to inherit the priority of the blocked task.
+ *
+ * Note 3: A receive (in the case of a queue) or take (in the case of a
+ * semaphore) operation must not be performed on a member of a queue set unless
+ * a call to xQueueSelectFromSet() has first returned a handle to that set member.
+ *
+ * @param xQueueSet The queue set on which the task will (potentially) block.
+ *
+ * @param xTicksToWait The maximum time, in ticks, that the calling task will
+ * remain in the Blocked state (with other tasks executing) to wait for a member
+ * of the queue set to be ready for a successful queue read or semaphore take
+ * operation.
+ *
+ * @return xQueueSelectFromSet() will return the handle of a queue (cast to
+ * a QueueSetMemberHandle_t type) contained in the queue set that contains data,
+ * or the handle of a semaphore (cast to a QueueSetMemberHandle_t type) contained
+ * in the queue set that is available, or NULL if no such queue or semaphore
+ * exists before before the specified block time expires.
+ */
+QueueSetMemberHandle_t xQueueSelectFromSet( QueueSetHandle_t xQueueSet, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * A version of xQueueSelectFromSet() that can be used from an ISR.
+ */
+QueueSetMemberHandle_t xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION;
+
+/* Not public API functions. */
+void vQueueWaitForMessageRestricted( QueueHandle_t xQueue, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely ) PRIVILEGED_FUNCTION;
+BaseType_t xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue ) PRIVILEGED_FUNCTION;
+void vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber ) PRIVILEGED_FUNCTION;
+UBaseType_t uxQueueGetQueueNumber( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+uint8_t ucQueueGetQueueType( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION;
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* QUEUE_H */
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h
new file mode 100644
index 0000000..a674b02
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h
@@ -0,0 +1,1171 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+#ifndef SEMAPHORE_H
+#define SEMAPHORE_H
+
+#ifndef INC_FREERTOS_H
+ #error "include FreeRTOS.h" must appear in source files before "include semphr.h"
+#endif
+
+#include "queue.h"
+
+typedef QueueHandle_t SemaphoreHandle_t;
+
+#define semBINARY_SEMAPHORE_QUEUE_LENGTH ( ( uint8_t ) 1U )
+#define semSEMAPHORE_QUEUE_ITEM_LENGTH ( ( uint8_t ) 0U )
+#define semGIVE_BLOCK_TIME ( ( TickType_t ) 0U )
+
+
+/**
+ * semphr. h
+ * vSemaphoreCreateBinary( SemaphoreHandle_t xSemaphore )
+ *
+ * In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a binary semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * This old vSemaphoreCreateBinary() macro is now deprecated in favour of the
+ * xSemaphoreCreateBinary() function. Note that binary semaphores created using
+ * the vSemaphoreCreateBinary() macro are created in a state such that the
+ * first call to 'take' the semaphore would pass, whereas binary semaphores
+ * created using xSemaphoreCreateBinary() are created in a state such that the
+ * the semaphore must first be 'given' before it can be 'taken'.
+ *
+ * Macro that implements a semaphore by using the existing queue mechanism.
+ * The queue length is 1 as this is a binary semaphore. The data size is 0
+ * as we don't want to actually store any data - we just want to know if the
+ * queue is empty or full.
+ *
+ * This type of semaphore can be used for pure synchronisation between tasks or
+ * between an interrupt and a task. The semaphore need not be given back once
+ * obtained, so one task/interrupt can continuously 'give' the semaphore while
+ * another continuously 'takes' the semaphore. For this reason this type of
+ * semaphore does not use a priority inheritance mechanism. For an alternative
+ * that does use priority inheritance see xSemaphoreCreateMutex().
+ *
+ * @param xSemaphore Handle to the created semaphore. Should be of type SemaphoreHandle_t.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+ // Semaphore cannot be used before a call to vSemaphoreCreateBinary ().
+ // This is a macro so pass the variable in directly.
+ vSemaphoreCreateBinary( xSemaphore );
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+
+ * \defgroup vSemaphoreCreateBinary vSemaphoreCreateBinary
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ #define vSemaphoreCreateBinary( xSemaphore ) \
+ { \
+ ( xSemaphore ) = xQueueGenericCreate( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE ); \
+ if( ( xSemaphore ) != NULL ) \
+ { \
+ ( void ) xSemaphoreGive( ( xSemaphore ) ); \
+ } \
+ }
+#endif
+
+/**
+ * semphr. h
+ * SemaphoreHandle_t xSemaphoreCreateBinary( void )
+ *
+ * Creates a new binary semaphore instance, and returns a handle by which the
+ * new semaphore can be referenced.
+ *
+ * In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a binary semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * Internally, within the FreeRTOS implementation, binary semaphores use a block
+ * of memory, in which the semaphore structure is stored. If a binary semaphore
+ * is created using xSemaphoreCreateBinary() then the required memory is
+ * automatically dynamically allocated inside the xSemaphoreCreateBinary()
+ * function. (see http://www.freertos.org/a00111.html). If a binary semaphore
+ * is created using xSemaphoreCreateBinaryStatic() then the application writer
+ * must provide the memory. xSemaphoreCreateBinaryStatic() therefore allows a
+ * binary semaphore to be created without using any dynamic memory allocation.
+ *
+ * The old vSemaphoreCreateBinary() macro is now deprecated in favour of this
+ * xSemaphoreCreateBinary() function. Note that binary semaphores created using
+ * the vSemaphoreCreateBinary() macro are created in a state such that the
+ * first call to 'take' the semaphore would pass, whereas binary semaphores
+ * created using xSemaphoreCreateBinary() are created in a state such that the
+ * the semaphore must first be 'given' before it can be 'taken'.
+ *
+ * This type of semaphore can be used for pure synchronisation between tasks or
+ * between an interrupt and a task. The semaphore need not be given back once
+ * obtained, so one task/interrupt can continuously 'give' the semaphore while
+ * another continuously 'takes' the semaphore. For this reason this type of
+ * semaphore does not use a priority inheritance mechanism. For an alternative
+ * that does use priority inheritance see xSemaphoreCreateMutex().
+ *
+ * @return Handle to the created semaphore, or NULL if the memory required to
+ * hold the semaphore's data structures could not be allocated.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+ // Semaphore cannot be used before a call to xSemaphoreCreateBinary().
+ // This is a macro so pass the variable in directly.
+ xSemaphore = xSemaphoreCreateBinary();
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+
+ * \defgroup xSemaphoreCreateBinary xSemaphoreCreateBinary
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ #define xSemaphoreCreateBinary() xQueueGenericCreate( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE )
+#endif
+
+/**
+ * semphr. h
+ * SemaphoreHandle_t xSemaphoreCreateBinaryStatic( StaticSemaphore_t *pxSemaphoreBuffer )
+ *
+ * Creates a new binary semaphore instance, and returns a handle by which the
+ * new semaphore can be referenced.
+ *
+ * NOTE: In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a binary semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * Internally, within the FreeRTOS implementation, binary semaphores use a block
+ * of memory, in which the semaphore structure is stored. If a binary semaphore
+ * is created using xSemaphoreCreateBinary() then the required memory is
+ * automatically dynamically allocated inside the xSemaphoreCreateBinary()
+ * function. (see http://www.freertos.org/a00111.html). If a binary semaphore
+ * is created using xSemaphoreCreateBinaryStatic() then the application writer
+ * must provide the memory. xSemaphoreCreateBinaryStatic() therefore allows a
+ * binary semaphore to be created without using any dynamic memory allocation.
+ *
+ * This type of semaphore can be used for pure synchronisation between tasks or
+ * between an interrupt and a task. The semaphore need not be given back once
+ * obtained, so one task/interrupt can continuously 'give' the semaphore while
+ * another continuously 'takes' the semaphore. For this reason this type of
+ * semaphore does not use a priority inheritance mechanism. For an alternative
+ * that does use priority inheritance see xSemaphoreCreateMutex().
+ *
+ * @param pxSemaphoreBuffer Must point to a variable of type StaticSemaphore_t,
+ * which will then be used to hold the semaphore's data structure, removing the
+ * need for the memory to be allocated dynamically.
+ *
+ * @return If the semaphore is created then a handle to the created semaphore is
+ * returned. If pxSemaphoreBuffer is NULL then NULL is returned.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore = NULL;
+ StaticSemaphore_t xSemaphoreBuffer;
+
+ void vATask( void * pvParameters )
+ {
+ // Semaphore cannot be used before a call to xSemaphoreCreateBinary().
+ // The semaphore's data structures will be placed in the xSemaphoreBuffer
+ // variable, the address of which is passed into the function. The
+ // function's parameter is not NULL, so the function will not attempt any
+ // dynamic memory allocation, and therefore the function will not return
+ // return NULL.
+ xSemaphore = xSemaphoreCreateBinary( &xSemaphoreBuffer );
+
+ // Rest of task code goes here.
+ }
+
+ * \defgroup xSemaphoreCreateBinaryStatic xSemaphoreCreateBinaryStatic
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ #define xSemaphoreCreateBinaryStatic( pxStaticSemaphore ) xQueueGenericCreateStatic( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, NULL, pxStaticSemaphore, queueQUEUE_TYPE_BINARY_SEMAPHORE )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * semphr. h
+ * xSemaphoreTake(
+ * SemaphoreHandle_t xSemaphore,
+ * TickType_t xBlockTime
+ * )
+ *
+ * Macro to obtain a semaphore. The semaphore must have previously been
+ * created with a call to xSemaphoreCreateBinary(), xSemaphoreCreateMutex() or
+ * xSemaphoreCreateCounting().
+ *
+ * @param xSemaphore A handle to the semaphore being taken - obtained when
+ * the semaphore was created.
+ *
+ * @param xBlockTime The time in ticks to wait for the semaphore to become
+ * available. The macro portTICK_PERIOD_MS can be used to convert this to a
+ * real time. A block time of zero can be used to poll the semaphore. A block
+ * time of portMAX_DELAY can be used to block indefinitely (provided
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h).
+ *
+ * @return pdTRUE if the semaphore was obtained. pdFALSE
+ * if xBlockTime expired without the semaphore becoming available.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ // A task that creates a semaphore.
+ void vATask( void * pvParameters )
+ {
+ // Create the semaphore to guard a shared resource.
+ xSemaphore = xSemaphoreCreateBinary();
+ }
+
+ // A task that uses the semaphore.
+ void vAnotherTask( void * pvParameters )
+ {
+ // ... Do other things.
+
+ if( xSemaphore != NULL )
+ {
+ // See if we can obtain the semaphore. If the semaphore is not available
+ // wait 10 ticks to see if it becomes free.
+ if( xSemaphoreTake( xSemaphore, ( TickType_t ) 10 ) == pdTRUE )
+ {
+ // We were able to obtain the semaphore and can now access the
+ // shared resource.
+
+ // ...
+
+ // We have finished accessing the shared resource. Release the
+ // semaphore.
+ xSemaphoreGive( xSemaphore );
+ }
+ else
+ {
+ // We could not obtain the semaphore and can therefore not access
+ // the shared resource safely.
+ }
+ }
+ }
+
+ * \defgroup xSemaphoreTake xSemaphoreTake
+ * \ingroup Semaphores
+ */
+#define xSemaphoreTake( xSemaphore, xBlockTime ) xQueueGenericReceive( ( QueueHandle_t ) ( xSemaphore ), NULL, ( xBlockTime ), pdFALSE )
+
+/**
+ * semphr. h
+ * xSemaphoreTakeRecursive(
+ * SemaphoreHandle_t xMutex,
+ * TickType_t xBlockTime
+ * )
+ *
+ * Macro to recursively obtain, or 'take', a mutex type semaphore.
+ * The mutex must have previously been created using a call to
+ * xSemaphoreCreateRecursiveMutex();
+ *
+ * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this
+ * macro to be available.
+ *
+ * This macro must not be used on mutexes created using xSemaphoreCreateMutex().
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also 'given' the mutex back
+ * exactly five times.
+ *
+ * @param xMutex A handle to the mutex being obtained. This is the
+ * handle returned by xSemaphoreCreateRecursiveMutex();
+ *
+ * @param xBlockTime The time in ticks to wait for the semaphore to become
+ * available. The macro portTICK_PERIOD_MS can be used to convert this to a
+ * real time. A block time of zero can be used to poll the semaphore. If
+ * the task already owns the semaphore then xSemaphoreTakeRecursive() will
+ * return immediately no matter what the value of xBlockTime.
+ *
+ * @return pdTRUE if the semaphore was obtained. pdFALSE if xBlockTime
+ * expired without the semaphore becoming available.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xMutex = NULL;
+
+ // A task that creates a mutex.
+ void vATask( void * pvParameters )
+ {
+ // Create the mutex to guard a shared resource.
+ xMutex = xSemaphoreCreateRecursiveMutex();
+ }
+
+ // A task that uses the mutex.
+ void vAnotherTask( void * pvParameters )
+ {
+ // ... Do other things.
+
+ if( xMutex != NULL )
+ {
+ // See if we can obtain the mutex. If the mutex is not available
+ // wait 10 ticks to see if it becomes free.
+ if( xSemaphoreTakeRecursive( xSemaphore, ( TickType_t ) 10 ) == pdTRUE )
+ {
+ // We were able to obtain the mutex and can now access the
+ // shared resource.
+
+ // ...
+ // For some reason due to the nature of the code further calls to
+ // xSemaphoreTakeRecursive() are made on the same mutex. In real
+ // code these would not be just sequential calls as this would make
+ // no sense. Instead the calls are likely to be buried inside
+ // a more complex call structure.
+ xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+ xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+
+ // The mutex has now been 'taken' three times, so will not be
+ // available to another task until it has also been given back
+ // three times. Again it is unlikely that real code would have
+ // these calls sequentially, but instead buried in a more complex
+ // call structure. This is just for illustrative purposes.
+ xSemaphoreGiveRecursive( xMutex );
+ xSemaphoreGiveRecursive( xMutex );
+ xSemaphoreGiveRecursive( xMutex );
+
+ // Now the mutex can be taken by other tasks.
+ }
+ else
+ {
+ // We could not obtain the mutex and can therefore not access
+ // the shared resource safely.
+ }
+ }
+ }
+
+ * \defgroup xSemaphoreTakeRecursive xSemaphoreTakeRecursive
+ * \ingroup Semaphores
+ */
+#if( configUSE_RECURSIVE_MUTEXES == 1 )
+ #define xSemaphoreTakeRecursive( xMutex, xBlockTime ) xQueueTakeMutexRecursive( ( xMutex ), ( xBlockTime ) )
+#endif
+
+/**
+ * semphr. h
+ * xSemaphoreGive( SemaphoreHandle_t xSemaphore )
+ *
+ * Macro to release a semaphore. The semaphore must have previously been
+ * created with a call to xSemaphoreCreateBinary(), xSemaphoreCreateMutex() or
+ * xSemaphoreCreateCounting(). and obtained using sSemaphoreTake().
+ *
+ * This macro must not be used from an ISR. See xSemaphoreGiveFromISR () for
+ * an alternative which can be used from an ISR.
+ *
+ * This macro must also not be used on semaphores created using
+ * xSemaphoreCreateRecursiveMutex().
+ *
+ * @param xSemaphore A handle to the semaphore being released. This is the
+ * handle returned when the semaphore was created.
+ *
+ * @return pdTRUE if the semaphore was released. pdFALSE if an error occurred.
+ * Semaphores are implemented using queues. An error can occur if there is
+ * no space on the queue to post a message - indicating that the
+ * semaphore was not first obtained correctly.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+ // Create the semaphore to guard a shared resource.
+ xSemaphore = vSemaphoreCreateBinary();
+
+ if( xSemaphore != NULL )
+ {
+ if( xSemaphoreGive( xSemaphore ) != pdTRUE )
+ {
+ // We would expect this call to fail because we cannot give
+ // a semaphore without first "taking" it!
+ }
+
+ // Obtain the semaphore - don't block if the semaphore is not
+ // immediately available.
+ if( xSemaphoreTake( xSemaphore, ( TickType_t ) 0 ) )
+ {
+ // We now have the semaphore and can access the shared resource.
+
+ // ...
+
+ // We have finished accessing the shared resource so can free the
+ // semaphore.
+ if( xSemaphoreGive( xSemaphore ) != pdTRUE )
+ {
+ // We would not expect this call to fail because we must have
+ // obtained the semaphore to get here.
+ }
+ }
+ }
+ }
+
+ * \defgroup xSemaphoreGive xSemaphoreGive
+ * \ingroup Semaphores
+ */
+#define xSemaphoreGive( xSemaphore ) xQueueGenericSend( ( QueueHandle_t ) ( xSemaphore ), NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK )
+
+/**
+ * semphr. h
+ * xSemaphoreGiveRecursive( SemaphoreHandle_t xMutex )
+ *
+ * Macro to recursively release, or 'give', a mutex type semaphore.
+ * The mutex must have previously been created using a call to
+ * xSemaphoreCreateRecursiveMutex();
+ *
+ * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this
+ * macro to be available.
+ *
+ * This macro must not be used on mutexes created using xSemaphoreCreateMutex().
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also 'given' the mutex back
+ * exactly five times.
+ *
+ * @param xMutex A handle to the mutex being released, or 'given'. This is the
+ * handle returned by xSemaphoreCreateMutex();
+ *
+ * @return pdTRUE if the semaphore was given.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xMutex = NULL;
+
+ // A task that creates a mutex.
+ void vATask( void * pvParameters )
+ {
+ // Create the mutex to guard a shared resource.
+ xMutex = xSemaphoreCreateRecursiveMutex();
+ }
+
+ // A task that uses the mutex.
+ void vAnotherTask( void * pvParameters )
+ {
+ // ... Do other things.
+
+ if( xMutex != NULL )
+ {
+ // See if we can obtain the mutex. If the mutex is not available
+ // wait 10 ticks to see if it becomes free.
+ if( xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 ) == pdTRUE )
+ {
+ // We were able to obtain the mutex and can now access the
+ // shared resource.
+
+ // ...
+ // For some reason due to the nature of the code further calls to
+ // xSemaphoreTakeRecursive() are made on the same mutex. In real
+ // code these would not be just sequential calls as this would make
+ // no sense. Instead the calls are likely to be buried inside
+ // a more complex call structure.
+ xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+ xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+
+ // The mutex has now been 'taken' three times, so will not be
+ // available to another task until it has also been given back
+ // three times. Again it is unlikely that real code would have
+ // these calls sequentially, it would be more likely that the calls
+ // to xSemaphoreGiveRecursive() would be called as a call stack
+ // unwound. This is just for demonstrative purposes.
+ xSemaphoreGiveRecursive( xMutex );
+ xSemaphoreGiveRecursive( xMutex );
+ xSemaphoreGiveRecursive( xMutex );
+
+ // Now the mutex can be taken by other tasks.
+ }
+ else
+ {
+ // We could not obtain the mutex and can therefore not access
+ // the shared resource safely.
+ }
+ }
+ }
+
+ * \defgroup xSemaphoreGiveRecursive xSemaphoreGiveRecursive
+ * \ingroup Semaphores
+ */
+#if( configUSE_RECURSIVE_MUTEXES == 1 )
+ #define xSemaphoreGiveRecursive( xMutex ) xQueueGiveMutexRecursive( ( xMutex ) )
+#endif
+
+/**
+ * semphr. h
+ *
+ xSemaphoreGiveFromISR(
+ SemaphoreHandle_t xSemaphore,
+ BaseType_t *pxHigherPriorityTaskWoken
+ )
+ *
+ * Macro to release a semaphore. The semaphore must have previously been
+ * created with a call to xSemaphoreCreateBinary() or xSemaphoreCreateCounting().
+ *
+ * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())
+ * must not be used with this macro.
+ *
+ * This macro can be used from an ISR.
+ *
+ * @param xSemaphore A handle to the semaphore being released. This is the
+ * handle returned when the semaphore was created.
+ *
+ * @param pxHigherPriorityTaskWoken xSemaphoreGiveFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if giving the semaphore caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xSemaphoreGiveFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the semaphore was successfully given, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+
+ \#define LONG_TIME 0xffff
+ \#define TICKS_TO_WAIT 10
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ // Repetitive task.
+ void vATask( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // We want this task to run every 10 ticks of a timer. The semaphore
+ // was created before this task was started.
+
+ // Block waiting for the semaphore to become available.
+ if( xSemaphoreTake( xSemaphore, LONG_TIME ) == pdTRUE )
+ {
+ // It is time to execute.
+
+ // ...
+
+ // We have finished our task. Return to the top of the loop where
+ // we will block on the semaphore until it is time to execute
+ // again. Note when using the semaphore for synchronisation with an
+ // ISR in this manner there is no need to 'give' the semaphore back.
+ }
+ }
+ }
+
+ // Timer ISR
+ void vTimerISR( void * pvParameters )
+ {
+ static uint8_t ucLocalTickCount = 0;
+ static BaseType_t xHigherPriorityTaskWoken;
+
+ // A timer tick has occurred.
+
+ // ... Do other time functions.
+
+ // Is it time for vATask () to run?
+ xHigherPriorityTaskWoken = pdFALSE;
+ ucLocalTickCount++;
+ if( ucLocalTickCount >= TICKS_TO_WAIT )
+ {
+ // Unblock the task by releasing the semaphore.
+ xSemaphoreGiveFromISR( xSemaphore, &xHigherPriorityTaskWoken );
+
+ // Reset the count so we release the semaphore again in 10 ticks time.
+ ucLocalTickCount = 0;
+ }
+
+ if( xHigherPriorityTaskWoken != pdFALSE )
+ {
+ // We can force a context switch here. Context switching from an
+ // ISR uses port specific syntax. Check the demo task for your port
+ // to find the syntax required.
+ }
+ }
+
+ * \defgroup xSemaphoreGiveFromISR xSemaphoreGiveFromISR
+ * \ingroup Semaphores
+ */
+#define xSemaphoreGiveFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueGiveFromISR( ( QueueHandle_t ) ( xSemaphore ), ( pxHigherPriorityTaskWoken ) )
+
+/**
+ * semphr. h
+ *
+ xSemaphoreTakeFromISR(
+ SemaphoreHandle_t xSemaphore,
+ BaseType_t *pxHigherPriorityTaskWoken
+ )
+ *
+ * Macro to take a semaphore from an ISR. The semaphore must have
+ * previously been created with a call to xSemaphoreCreateBinary() or
+ * xSemaphoreCreateCounting().
+ *
+ * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())
+ * must not be used with this macro.
+ *
+ * This macro can be used from an ISR, however taking a semaphore from an ISR
+ * is not a common operation. It is likely to only be useful when taking a
+ * counting semaphore when an interrupt is obtaining an object from a resource
+ * pool (when the semaphore count indicates the number of resources available).
+ *
+ * @param xSemaphore A handle to the semaphore being taken. This is the
+ * handle returned when the semaphore was created.
+ *
+ * @param pxHigherPriorityTaskWoken xSemaphoreTakeFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if taking the semaphore caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xSemaphoreTakeFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the semaphore was successfully taken, otherwise
+ * pdFALSE
+ */
+#define xSemaphoreTakeFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueReceiveFromISR( ( QueueHandle_t ) ( xSemaphore ), NULL, ( pxHigherPriorityTaskWoken ) )
+
+/**
+ * semphr. h
+ * SemaphoreHandle_t xSemaphoreCreateMutex( void )
+ *
+ * Creates a new mutex type semaphore instance, and returns a handle by which
+ * the new mutex can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, mutex semaphores use a block
+ * of memory, in which the mutex structure is stored. If a mutex is created
+ * using xSemaphoreCreateMutex() then the required memory is automatically
+ * dynamically allocated inside the xSemaphoreCreateMutex() function. (see
+ * http://www.freertos.org/a00111.html). If a mutex is created using
+ * xSemaphoreCreateMutexStatic() then the application writer must provided the
+ * memory. xSemaphoreCreateMutexStatic() therefore allows a mutex to be created
+ * without using any dynamic memory allocation.
+ *
+ * Mutexes created using this function can be accessed using the xSemaphoreTake()
+ * and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and
+ * xSemaphoreGiveRecursive() macros must not be used.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See xSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @return If the mutex was successfully created then a handle to the created
+ * semaphore is returned. If there was not enough heap to allocate the mutex
+ * data structures then NULL is returned.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ // Semaphore cannot be used before a call to xSemaphoreCreateMutex().
+ // This is a macro so pass the variable in directly.
+ xSemaphore = xSemaphoreCreateMutex();
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+
+ * \defgroup xSemaphoreCreateMutex xSemaphoreCreateMutex
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ #define xSemaphoreCreateMutex() xQueueCreateMutex( queueQUEUE_TYPE_MUTEX )
+#endif
+
+/**
+ * semphr. h
+ * SemaphoreHandle_t xSemaphoreCreateMutexStatic( StaticSemaphore_t *pxMutexBuffer )
+ *
+ * Creates a new mutex type semaphore instance, and returns a handle by which
+ * the new mutex can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, mutex semaphores use a block
+ * of memory, in which the mutex structure is stored. If a mutex is created
+ * using xSemaphoreCreateMutex() then the required memory is automatically
+ * dynamically allocated inside the xSemaphoreCreateMutex() function. (see
+ * http://www.freertos.org/a00111.html). If a mutex is created using
+ * xSemaphoreCreateMutexStatic() then the application writer must provided the
+ * memory. xSemaphoreCreateMutexStatic() therefore allows a mutex to be created
+ * without using any dynamic memory allocation.
+ *
+ * Mutexes created using this function can be accessed using the xSemaphoreTake()
+ * and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and
+ * xSemaphoreGiveRecursive() macros must not be used.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See xSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @param pxMutexBuffer Must point to a variable of type StaticSemaphore_t,
+ * which will be used to hold the mutex's data structure, removing the need for
+ * the memory to be allocated dynamically.
+ *
+ * @return If the mutex was successfully created then a handle to the created
+ * mutex is returned. If pxMutexBuffer was NULL then NULL is returned.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xMutexBuffer;
+
+ void vATask( void * pvParameters )
+ {
+ // A mutex cannot be used before it has been created. xMutexBuffer is
+ // into xSemaphoreCreateMutexStatic() so no dynamic memory allocation is
+ // attempted.
+ xSemaphore = xSemaphoreCreateMutexStatic( &xMutexBuffer );
+
+ // As no dynamic memory allocation was performed, xSemaphore cannot be NULL,
+ // so there is no need to check it.
+ }
+
+ * \defgroup xSemaphoreCreateMutexStatic xSemaphoreCreateMutexStatic
+ * \ingroup Semaphores
+ */
+ #if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ #define xSemaphoreCreateMutexStatic( pxMutexBuffer ) xQueueCreateMutexStatic( queueQUEUE_TYPE_MUTEX, ( pxMutexBuffer ) )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+
+/**
+ * semphr. h
+ * SemaphoreHandle_t xSemaphoreCreateRecursiveMutex( void )
+ *
+ * Creates a new recursive mutex type semaphore instance, and returns a handle
+ * by which the new recursive mutex can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, recursive mutexs use a block
+ * of memory, in which the mutex structure is stored. If a recursive mutex is
+ * created using xSemaphoreCreateRecursiveMutex() then the required memory is
+ * automatically dynamically allocated inside the
+ * xSemaphoreCreateRecursiveMutex() function. (see
+ * http://www.freertos.org/a00111.html). If a recursive mutex is created using
+ * xSemaphoreCreateRecursiveMutexStatic() then the application writer must
+ * provide the memory that will get used by the mutex.
+ * xSemaphoreCreateRecursiveMutexStatic() therefore allows a recursive mutex to
+ * be created without using any dynamic memory allocation.
+ *
+ * Mutexes created using this macro can be accessed using the
+ * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The
+ * xSemaphoreTake() and xSemaphoreGive() macros must not be used.
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also 'given' the mutex back
+ * exactly five times.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See xSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @return xSemaphore Handle to the created mutex semaphore. Should be of type
+ * SemaphoreHandle_t.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ // Semaphore cannot be used before a call to xSemaphoreCreateMutex().
+ // This is a macro so pass the variable in directly.
+ xSemaphore = xSemaphoreCreateRecursiveMutex();
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+
+ * \defgroup xSemaphoreCreateRecursiveMutex xSemaphoreCreateRecursiveMutex
+ * \ingroup Semaphores
+ */
+#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configUSE_RECURSIVE_MUTEXES == 1 ) )
+ #define xSemaphoreCreateRecursiveMutex() xQueueCreateMutex( queueQUEUE_TYPE_RECURSIVE_MUTEX )
+#endif
+
+/**
+ * semphr. h
+ * SemaphoreHandle_t xSemaphoreCreateRecursiveMutexStatic( StaticSemaphore_t *pxMutexBuffer )
+ *
+ * Creates a new recursive mutex type semaphore instance, and returns a handle
+ * by which the new recursive mutex can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, recursive mutexs use a block
+ * of memory, in which the mutex structure is stored. If a recursive mutex is
+ * created using xSemaphoreCreateRecursiveMutex() then the required memory is
+ * automatically dynamically allocated inside the
+ * xSemaphoreCreateRecursiveMutex() function. (see
+ * http://www.freertos.org/a00111.html). If a recursive mutex is created using
+ * xSemaphoreCreateRecursiveMutexStatic() then the application writer must
+ * provide the memory that will get used by the mutex.
+ * xSemaphoreCreateRecursiveMutexStatic() therefore allows a recursive mutex to
+ * be created without using any dynamic memory allocation.
+ *
+ * Mutexes created using this macro can be accessed using the
+ * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The
+ * xSemaphoreTake() and xSemaphoreGive() macros must not be used.
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also 'given' the mutex back
+ * exactly five times.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See xSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @param pxMutexBuffer Must point to a variable of type StaticSemaphore_t,
+ * which will then be used to hold the recursive mutex's data structure,
+ * removing the need for the memory to be allocated dynamically.
+ *
+ * @return If the recursive mutex was successfully created then a handle to the
+ * created recursive mutex is returned. If pxMutexBuffer was NULL then NULL is
+ * returned.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xMutexBuffer;
+
+ void vATask( void * pvParameters )
+ {
+ // A recursive semaphore cannot be used before it is created. Here a
+ // recursive mutex is created using xSemaphoreCreateRecursiveMutexStatic().
+ // The address of xMutexBuffer is passed into the function, and will hold
+ // the mutexes data structures - so no dynamic memory allocation will be
+ // attempted.
+ xSemaphore = xSemaphoreCreateRecursiveMutexStatic( &xMutexBuffer );
+
+ // As no dynamic memory allocation was performed, xSemaphore cannot be NULL,
+ // so there is no need to check it.
+ }
+
+ * \defgroup xSemaphoreCreateRecursiveMutexStatic xSemaphoreCreateRecursiveMutexStatic
+ * \ingroup Semaphores
+ */
+#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configUSE_RECURSIVE_MUTEXES == 1 ) )
+ #define xSemaphoreCreateRecursiveMutexStatic( pxStaticSemaphore ) xQueueCreateMutexStatic( queueQUEUE_TYPE_RECURSIVE_MUTEX, pxStaticSemaphore )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * semphr. h
+ * SemaphoreHandle_t xSemaphoreCreateCounting( UBaseType_t uxMaxCount, UBaseType_t uxInitialCount )
+ *
+ * Creates a new counting semaphore instance, and returns a handle by which the
+ * new counting semaphore can be referenced.
+ *
+ * In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a counting semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * Internally, within the FreeRTOS implementation, counting semaphores use a
+ * block of memory, in which the counting semaphore structure is stored. If a
+ * counting semaphore is created using xSemaphoreCreateCounting() then the
+ * required memory is automatically dynamically allocated inside the
+ * xSemaphoreCreateCounting() function. (see
+ * http://www.freertos.org/a00111.html). If a counting semaphore is created
+ * using xSemaphoreCreateCountingStatic() then the application writer can
+ * instead optionally provide the memory that will get used by the counting
+ * semaphore. xSemaphoreCreateCountingStatic() therefore allows a counting
+ * semaphore to be created without using any dynamic memory allocation.
+ *
+ * Counting semaphores are typically used for two things:
+ *
+ * 1) Counting events.
+ *
+ * In this usage scenario an event handler will 'give' a semaphore each time
+ * an event occurs (incrementing the semaphore count value), and a handler
+ * task will 'take' a semaphore each time it processes an event
+ * (decrementing the semaphore count value). The count value is therefore
+ * the difference between the number of events that have occurred and the
+ * number that have been processed. In this case it is desirable for the
+ * initial count value to be zero.
+ *
+ * 2) Resource management.
+ *
+ * In this usage scenario the count value indicates the number of resources
+ * available. To obtain control of a resource a task must first obtain a
+ * semaphore - decrementing the semaphore count value. When the count value
+ * reaches zero there are no free resources. When a task finishes with the
+ * resource it 'gives' the semaphore back - incrementing the semaphore count
+ * value. In this case it is desirable for the initial count value to be
+ * equal to the maximum count value, indicating that all resources are free.
+ *
+ * @param uxMaxCount The maximum count value that can be reached. When the
+ * semaphore reaches this value it can no longer be 'given'.
+ *
+ * @param uxInitialCount The count value assigned to the semaphore when it is
+ * created.
+ *
+ * @return Handle to the created semaphore. Null if the semaphore could not be
+ * created.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ // Semaphore cannot be used before a call to xSemaphoreCreateCounting().
+ // The max value to which the semaphore can count should be 10, and the
+ // initial value assigned to the count should be 0.
+ xSemaphore = xSemaphoreCreateCounting( 10, 0 );
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+
+ * \defgroup xSemaphoreCreateCounting xSemaphoreCreateCounting
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ #define xSemaphoreCreateCounting( uxMaxCount, uxInitialCount ) xQueueCreateCountingSemaphore( ( uxMaxCount ), ( uxInitialCount ) )
+#endif
+
+/**
+ * semphr. h
+ * SemaphoreHandle_t xSemaphoreCreateCountingStatic( UBaseType_t uxMaxCount, UBaseType_t uxInitialCount, StaticSemaphore_t *pxSemaphoreBuffer )
+ *
+ * Creates a new counting semaphore instance, and returns a handle by which the
+ * new counting semaphore can be referenced.
+ *
+ * In many usage scenarios it is faster and more memory efficient to use a
+ * direct to task notification in place of a counting semaphore!
+ * http://www.freertos.org/RTOS-task-notifications.html
+ *
+ * Internally, within the FreeRTOS implementation, counting semaphores use a
+ * block of memory, in which the counting semaphore structure is stored. If a
+ * counting semaphore is created using xSemaphoreCreateCounting() then the
+ * required memory is automatically dynamically allocated inside the
+ * xSemaphoreCreateCounting() function. (see
+ * http://www.freertos.org/a00111.html). If a counting semaphore is created
+ * using xSemaphoreCreateCountingStatic() then the application writer must
+ * provide the memory. xSemaphoreCreateCountingStatic() therefore allows a
+ * counting semaphore to be created without using any dynamic memory allocation.
+ *
+ * Counting semaphores are typically used for two things:
+ *
+ * 1) Counting events.
+ *
+ * In this usage scenario an event handler will 'give' a semaphore each time
+ * an event occurs (incrementing the semaphore count value), and a handler
+ * task will 'take' a semaphore each time it processes an event
+ * (decrementing the semaphore count value). The count value is therefore
+ * the difference between the number of events that have occurred and the
+ * number that have been processed. In this case it is desirable for the
+ * initial count value to be zero.
+ *
+ * 2) Resource management.
+ *
+ * In this usage scenario the count value indicates the number of resources
+ * available. To obtain control of a resource a task must first obtain a
+ * semaphore - decrementing the semaphore count value. When the count value
+ * reaches zero there are no free resources. When a task finishes with the
+ * resource it 'gives' the semaphore back - incrementing the semaphore count
+ * value. In this case it is desirable for the initial count value to be
+ * equal to the maximum count value, indicating that all resources are free.
+ *
+ * @param uxMaxCount The maximum count value that can be reached. When the
+ * semaphore reaches this value it can no longer be 'given'.
+ *
+ * @param uxInitialCount The count value assigned to the semaphore when it is
+ * created.
+ *
+ * @param pxSemaphoreBuffer Must point to a variable of type StaticSemaphore_t,
+ * which will then be used to hold the semaphore's data structure, removing the
+ * need for the memory to be allocated dynamically.
+ *
+ * @return If the counting semaphore was successfully created then a handle to
+ * the created counting semaphore is returned. If pxSemaphoreBuffer was NULL
+ * then NULL is returned.
+ *
+ * Example usage:
+
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xSemaphoreBuffer;
+
+ void vATask( void * pvParameters )
+ {
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ // Counting semaphore cannot be used before they have been created. Create
+ // a counting semaphore using xSemaphoreCreateCountingStatic(). The max
+ // value to which the semaphore can count is 10, and the initial value
+ // assigned to the count will be 0. The address of xSemaphoreBuffer is
+ // passed in and will be used to hold the semaphore structure, so no dynamic
+ // memory allocation will be used.
+ xSemaphore = xSemaphoreCreateCounting( 10, 0, &xSemaphoreBuffer );
+
+ // No memory allocation was attempted so xSemaphore cannot be NULL, so there
+ // is no need to check its value.
+ }
+
+ * \defgroup xSemaphoreCreateCountingStatic xSemaphoreCreateCountingStatic
+ * \ingroup Semaphores
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ #define xSemaphoreCreateCountingStatic( uxMaxCount, uxInitialCount, pxSemaphoreBuffer ) xQueueCreateCountingSemaphoreStatic( ( uxMaxCount ), ( uxInitialCount ), ( pxSemaphoreBuffer ) )
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * semphr. h
+ * void vSemaphoreDelete( SemaphoreHandle_t xSemaphore );
+ *
+ * Delete a semaphore. This function must be used with care. For example,
+ * do not delete a mutex type semaphore if the mutex is held by a task.
+ *
+ * @param xSemaphore A handle to the semaphore to be deleted.
+ *
+ * \defgroup vSemaphoreDelete vSemaphoreDelete
+ * \ingroup Semaphores
+ */
+#define vSemaphoreDelete( xSemaphore ) vQueueDelete( ( QueueHandle_t ) ( xSemaphore ) )
+
+/**
+ * semphr.h
+ * TaskHandle_t xSemaphoreGetMutexHolder( SemaphoreHandle_t xMutex );
+ *
+ * If xMutex is indeed a mutex type semaphore, return the current mutex holder.
+ * If xMutex is not a mutex type semaphore, or the mutex is available (not held
+ * by a task), return NULL.
+ *
+ * Note: This is a good way of determining if the calling task is the mutex
+ * holder, but not a good way of determining the identity of the mutex holder as
+ * the holder may change between the function exiting and the returned value
+ * being tested.
+ */
+#define xSemaphoreGetMutexHolder( xSemaphore ) xQueueGetMutexHolder( ( xSemaphore ) )
+
+/**
+ * semphr.h
+ * UBaseType_t uxSemaphoreGetCount( SemaphoreHandle_t xSemaphore );
+ *
+ * If the semaphore is a counting semaphore then uxSemaphoreGetCount() returns
+ * its current count value. If the semaphore is a binary semaphore then
+ * uxSemaphoreGetCount() returns 1 if the semaphore is available, and 0 if the
+ * semaphore is not available.
+ *
+ */
+#define uxSemaphoreGetCount( xSemaphore ) uxQueueMessagesWaiting( ( QueueHandle_t ) ( xSemaphore ) )
+
+#endif /* SEMAPHORE_H */
+
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/task.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/task.h
new file mode 100644
index 0000000..d0643c0
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/task.h
@@ -0,0 +1,2267 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+
+#ifndef INC_TASK_H
+#define INC_TASK_H
+
+#ifndef INC_FREERTOS_H
+ #error "include FreeRTOS.h must appear in source files before include task.h"
+#endif
+
+#include "list.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * MACROS AND DEFINITIONS
+ *----------------------------------------------------------*/
+
+#define tskKERNEL_VERSION_NUMBER "V9.0.0"
+#define tskKERNEL_VERSION_MAJOR 9
+#define tskKERNEL_VERSION_MINOR 0
+#define tskKERNEL_VERSION_BUILD 0
+
+/**
+ * task. h
+ *
+ * Type by which tasks are referenced. For example, a call to xTaskCreate
+ * returns (via a pointer parameter) an TaskHandle_t variable that can then
+ * be used as a parameter to vTaskDelete to delete the task.
+ *
+ * \defgroup TaskHandle_t TaskHandle_t
+ * \ingroup Tasks
+ */
+typedef void * TaskHandle_t;
+
+/*
+ * Defines the prototype to which the application task hook function must
+ * conform.
+ */
+typedef BaseType_t (*TaskHookFunction_t)( void * );
+
+/* Task states returned by eTaskGetState. */
+typedef enum
+{
+ eRunning = 0, /* A task is querying the state of itself, so must be running. */
+ eReady, /* The task being queried is in a read or pending ready list. */
+ eBlocked, /* The task being queried is in the Blocked state. */
+ eSuspended, /* The task being queried is in the Suspended state, or is in the Blocked state with an infinite time out. */
+ eDeleted, /* The task being queried has been deleted, but its TCB has not yet been freed. */
+ eInvalid /* Used as an 'invalid state' value. */
+} eTaskState;
+
+/* Actions that can be performed when vTaskNotify() is called. */
+typedef enum
+{
+ eNoAction = 0, /* Notify the task without updating its notify value. */
+ eSetBits, /* Set bits in the task's notification value. */
+ eIncrement, /* Increment the task's notification value. */
+ eSetValueWithOverwrite, /* Set the task's notification value to a specific value even if the previous value has not yet been read by the task. */
+ eSetValueWithoutOverwrite /* Set the task's notification value if the previous value has been read by the task. */
+} eNotifyAction;
+
+/*
+ * Used internally only.
+ */
+typedef struct xTIME_OUT
+{
+ BaseType_t xOverflowCount;
+ TickType_t xTimeOnEntering;
+} TimeOut_t;
+
+/*
+ * Defines the memory ranges allocated to the task when an MPU is used.
+ */
+typedef struct xMEMORY_REGION
+{
+ void *pvBaseAddress;
+ uint32_t ulLengthInBytes;
+ uint32_t ulParameters;
+} MemoryRegion_t;
+
+/*
+ * Parameters required to create an MPU protected task.
+ */
+typedef struct xTASK_PARAMETERS
+{
+ TaskFunction_t pvTaskCode;
+ const char * const pcName; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ uint16_t usStackDepth;
+ void *pvParameters;
+ UBaseType_t uxPriority;
+ StackType_t *puxStackBuffer;
+ MemoryRegion_t xRegions[ portNUM_CONFIGURABLE_REGIONS ];
+} TaskParameters_t;
+
+/* Used with the uxTaskGetSystemState() function to return the state of each task
+in the system. */
+typedef struct xTASK_STATUS
+{
+ TaskHandle_t xHandle; /* The handle of the task to which the rest of the information in the structure relates. */
+ const char *pcTaskName; /* A pointer to the task's name. This value will be invalid if the task was deleted since the structure was populated! */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ UBaseType_t xTaskNumber; /* A number unique to the task. */
+ eTaskState eCurrentState; /* The state in which the task existed when the structure was populated. */
+ UBaseType_t uxCurrentPriority; /* The priority at which the task was running (may be inherited) when the structure was populated. */
+ UBaseType_t uxBasePriority; /* The priority to which the task will return if the task's current priority has been inherited to avoid unbounded priority inversion when obtaining a mutex. Only valid if configUSE_MUTEXES is defined as 1 in FreeRTOSConfig.h. */
+ uint32_t ulRunTimeCounter; /* The total run time allocated to the task so far, as defined by the run time stats clock. See http://www.freertos.org/rtos-run-time-stats.html. Only valid when configGENERATE_RUN_TIME_STATS is defined as 1 in FreeRTOSConfig.h. */
+ StackType_t *pxStackBase; /* Points to the lowest address of the task's stack area. */
+ uint16_t usStackHighWaterMark; /* The minimum amount of stack space that has remained for the task since the task was created. The closer this value is to zero the closer the task has come to overflowing its stack. */
+} TaskStatus_t;
+
+/* Possible return values for eTaskConfirmSleepModeStatus(). */
+typedef enum
+{
+ eAbortSleep = 0, /* A task has been made ready or a context switch pended since portSUPPORESS_TICKS_AND_SLEEP() was called - abort entering a sleep mode. */
+ eStandardSleep, /* Enter a sleep mode that will not last any longer than the expected idle time. */
+ eNoTasksWaitingTimeout /* No tasks are waiting for a timeout so it is safe to enter a sleep mode that can only be exited by an external interrupt. */
+} eSleepModeStatus;
+
+/**
+ * Defines the priority used by the idle task. This must not be modified.
+ *
+ * \ingroup TaskUtils
+ */
+#define tskIDLE_PRIORITY ( ( UBaseType_t ) 0U )
+
+/**
+ * task. h
+ *
+ * Macro for forcing a context switch.
+ *
+ * \defgroup taskYIELD taskYIELD
+ * \ingroup SchedulerControl
+ */
+#define taskYIELD() portYIELD()
+
+/**
+ * task. h
+ *
+ * Macro to mark the start of a critical code region. Preemptive context
+ * switches cannot occur when in a critical region.
+ *
+ * NOTE: This may alter the stack (depending on the portable implementation)
+ * so must be used with care!
+ *
+ * \defgroup taskENTER_CRITICAL taskENTER_CRITICAL
+ * \ingroup SchedulerControl
+ */
+#define taskENTER_CRITICAL() portENTER_CRITICAL()
+#define taskENTER_CRITICAL_FROM_ISR() portSET_INTERRUPT_MASK_FROM_ISR()
+
+/**
+ * task. h
+ *
+ * Macro to mark the end of a critical code region. Preemptive context
+ * switches cannot occur when in a critical region.
+ *
+ * NOTE: This may alter the stack (depending on the portable implementation)
+ * so must be used with care!
+ *
+ * \defgroup taskEXIT_CRITICAL taskEXIT_CRITICAL
+ * \ingroup SchedulerControl
+ */
+#define taskEXIT_CRITICAL() portEXIT_CRITICAL()
+#define taskEXIT_CRITICAL_FROM_ISR( x ) portCLEAR_INTERRUPT_MASK_FROM_ISR( x )
+/**
+ * task. h
+ *
+ * Macro to disable all maskable interrupts.
+ *
+ * \defgroup taskDISABLE_INTERRUPTS taskDISABLE_INTERRUPTS
+ * \ingroup SchedulerControl
+ */
+#define taskDISABLE_INTERRUPTS() portDISABLE_INTERRUPTS()
+
+/**
+ * task. h
+ *
+ * Macro to enable microcontroller interrupts.
+ *
+ * \defgroup taskENABLE_INTERRUPTS taskENABLE_INTERRUPTS
+ * \ingroup SchedulerControl
+ */
+#define taskENABLE_INTERRUPTS() portENABLE_INTERRUPTS()
+
+/* Definitions returned by xTaskGetSchedulerState(). taskSCHEDULER_SUSPENDED is
+0 to generate more optimal code when configASSERT() is defined as the constant
+is used in assert() statements. */
+#define taskSCHEDULER_SUSPENDED ( ( BaseType_t ) 0 )
+#define taskSCHEDULER_NOT_STARTED ( ( BaseType_t ) 1 )
+#define taskSCHEDULER_RUNNING ( ( BaseType_t ) 2 )
+
+
+/*-----------------------------------------------------------
+ * TASK CREATION API
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ *
+ BaseType_t xTaskCreate(
+ TaskFunction_t pvTaskCode,
+ const char * const pcName,
+ uint16_t usStackDepth,
+ void *pvParameters,
+ UBaseType_t uxPriority,
+ TaskHandle_t *pvCreatedTask
+ );
+ *
+ * Create a new task and add it to the list of tasks that are ready to run.
+ *
+ * Internally, within the FreeRTOS implementation, tasks use two blocks of
+ * memory. The first block is used to hold the task's data structures. The
+ * second block is used by the task as its stack. If a task is created using
+ * xTaskCreate() then both blocks of memory are automatically dynamically
+ * allocated inside the xTaskCreate() function. (see
+ * http://www.freertos.org/a00111.html). If a task is created using
+ * xTaskCreateStatic() then the application writer must provide the required
+ * memory. xTaskCreateStatic() therefore allows a task to be created without
+ * using any dynamic memory allocation.
+ *
+ * See xTaskCreateStatic() for a version that does not use any dynamic memory
+ * allocation.
+ *
+ * xTaskCreate() can only be used to create a task that has unrestricted
+ * access to the entire microcontroller memory map. Systems that include MPU
+ * support can alternatively create an MPU constrained task using
+ * xTaskCreateRestricted().
+ *
+ * @param pvTaskCode Pointer to the task entry function. Tasks
+ * must be implemented to never return (i.e. continuous loop).
+ *
+ * @param pcName A descriptive name for the task. This is mainly used to
+ * facilitate debugging. Max length defined by configMAX_TASK_NAME_LEN - default
+ * is 16.
+ *
+ * @param usStackDepth The size of the task stack specified as the number of
+ * variables the stack can hold - not the number of bytes. For example, if
+ * the stack is 16 bits wide and usStackDepth is defined as 100, 200 bytes
+ * will be allocated for stack storage.
+ *
+ * @param pvParameters Pointer that will be used as the parameter for the task
+ * being created.
+ *
+ * @param uxPriority The priority at which the task should run. Systems that
+ * include MPU support can optionally create tasks in a privileged (system)
+ * mode by setting bit portPRIVILEGE_BIT of the priority parameter. For
+ * example, to create a privileged task at priority 2 the uxPriority parameter
+ * should be set to ( 2 | portPRIVILEGE_BIT ).
+ *
+ * @param pvCreatedTask Used to pass back a handle by which the created task
+ * can be referenced.
+ *
+ * @return pdPASS if the task was successfully created and added to a ready
+ * list, otherwise an error code defined in the file projdefs.h
+ *
+ * Example usage:
+
+ // Task to be created.
+ void vTaskCode( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // Task code goes here.
+ }
+ }
+
+ // Function that creates a task.
+ void vOtherFunction( void )
+ {
+ static uint8_t ucParameterToPass;
+ TaskHandle_t xHandle = NULL;
+
+ // Create the task, storing the handle. Note that the passed parameter ucParameterToPass
+ // must exist for the lifetime of the task, so in this case is declared static. If it was just an
+ // an automatic stack variable it might no longer exist, or at least have been corrupted, by the time
+ // the new task attempts to access it.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, &ucParameterToPass, tskIDLE_PRIORITY, &xHandle );
+ configASSERT( xHandle );
+
+ // Use the handle to delete the task.
+ if( xHandle != NULL )
+ {
+ vTaskDelete( xHandle );
+ }
+ }
+
+ * \defgroup xTaskCreate xTaskCreate
+ * \ingroup Tasks
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ BaseType_t xTaskCreate( TaskFunction_t pxTaskCode,
+ const char * const pcName,
+ const uint16_t usStackDepth,
+ void * const pvParameters,
+ UBaseType_t uxPriority,
+ TaskHandle_t * const pxCreatedTask ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif
+
+/**
+ * task. h
+ *
+ TaskHandle_t xTaskCreateStatic( TaskFunction_t pvTaskCode,
+ const char * const pcName,
+ uint32_t ulStackDepth,
+ void *pvParameters,
+ UBaseType_t uxPriority,
+ StackType_t *pxStackBuffer,
+ StaticTask_t *pxTaskBuffer );
+ *
+ * Create a new task and add it to the list of tasks that are ready to run.
+ *
+ * Internally, within the FreeRTOS implementation, tasks use two blocks of
+ * memory. The first block is used to hold the task's data structures. The
+ * second block is used by the task as its stack. If a task is created using
+ * xTaskCreate() then both blocks of memory are automatically dynamically
+ * allocated inside the xTaskCreate() function. (see
+ * http://www.freertos.org/a00111.html). If a task is created using
+ * xTaskCreateStatic() then the application writer must provide the required
+ * memory. xTaskCreateStatic() therefore allows a task to be created without
+ * using any dynamic memory allocation.
+ *
+ * @param pvTaskCode Pointer to the task entry function. Tasks
+ * must be implemented to never return (i.e. continuous loop).
+ *
+ * @param pcName A descriptive name for the task. This is mainly used to
+ * facilitate debugging. The maximum length of the string is defined by
+ * configMAX_TASK_NAME_LEN in FreeRTOSConfig.h.
+ *
+ * @param ulStackDepth The size of the task stack specified as the number of
+ * variables the stack can hold - not the number of bytes. For example, if
+ * the stack is 32-bits wide and ulStackDepth is defined as 100 then 400 bytes
+ * will be allocated for stack storage.
+ *
+ * @param pvParameters Pointer that will be used as the parameter for the task
+ * being created.
+ *
+ * @param uxPriority The priority at which the task will run.
+ *
+ * @param pxStackBuffer Must point to a StackType_t array that has at least
+ * ulStackDepth indexes - the array will then be used as the task's stack,
+ * removing the need for the stack to be allocated dynamically.
+ *
+ * @param pxTaskBuffer Must point to a variable of type StaticTask_t, which will
+ * then be used to hold the task's data structures, removing the need for the
+ * memory to be allocated dynamically.
+ *
+ * @return If neither pxStackBuffer or pxTaskBuffer are NULL, then the task will
+ * be created and pdPASS is returned. If either pxStackBuffer or pxTaskBuffer
+ * are NULL then the task will not be created and
+ * errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY is returned.
+ *
+ * Example usage:
+
+
+ // Dimensions the buffer that the task being created will use as its stack.
+ // NOTE: This is the number of words the stack will hold, not the number of
+ // bytes. For example, if each stack item is 32-bits, and this is set to 100,
+ // then 400 bytes (100 * 32-bits) will be allocated.
+ #define STACK_SIZE 200
+
+ // Structure that will hold the TCB of the task being created.
+ StaticTask_t xTaskBuffer;
+
+ // Buffer that the task being created will use as its stack. Note this is
+ // an array of StackType_t variables. The size of StackType_t is dependent on
+ // the RTOS port.
+ StackType_t xStack[ STACK_SIZE ];
+
+ // Function that implements the task being created.
+ void vTaskCode( void * pvParameters )
+ {
+ // The parameter value is expected to be 1 as 1 is passed in the
+ // pvParameters value in the call to xTaskCreateStatic().
+ configASSERT( ( uint32_t ) pvParameters == 1UL );
+
+ for( ;; )
+ {
+ // Task code goes here.
+ }
+ }
+
+ // Function that creates a task.
+ void vOtherFunction( void )
+ {
+ TaskHandle_t xHandle = NULL;
+
+ // Create the task without using any dynamic memory allocation.
+ xHandle = xTaskCreateStatic(
+ vTaskCode, // Function that implements the task.
+ "NAME", // Text name for the task.
+ STACK_SIZE, // Stack size in words, not bytes.
+ ( void * ) 1, // Parameter passed into the task.
+ tskIDLE_PRIORITY,// Priority at which the task is created.
+ xStack, // Array to use as the task's stack.
+ &xTaskBuffer ); // Variable to hold the task's data structure.
+
+ // puxStackBuffer and pxTaskBuffer were not NULL, so the task will have
+ // been created, and xHandle will be the task's handle. Use the handle
+ // to suspend the task.
+ vTaskSuspend( xHandle );
+ }
+
+ * \defgroup xTaskCreateStatic xTaskCreateStatic
+ * \ingroup Tasks
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ TaskHandle_t xTaskCreateStatic( TaskFunction_t pxTaskCode,
+ const char * const pcName,
+ const uint32_t ulStackDepth,
+ void * const pvParameters,
+ UBaseType_t uxPriority,
+ StackType_t * const puxStackBuffer,
+ StaticTask_t * const pxTaskBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * task. h
+ *
+ BaseType_t xTaskCreateRestricted( TaskParameters_t *pxTaskDefinition, TaskHandle_t *pxCreatedTask );
+ *
+ * xTaskCreateRestricted() should only be used in systems that include an MPU
+ * implementation.
+ *
+ * Create a new task and add it to the list of tasks that are ready to run.
+ * The function parameters define the memory regions and associated access
+ * permissions allocated to the task.
+ *
+ * @param pxTaskDefinition Pointer to a structure that contains a member
+ * for each of the normal xTaskCreate() parameters (see the xTaskCreate() API
+ * documentation) plus an optional stack buffer and the memory region
+ * definitions.
+ *
+ * @param pxCreatedTask Used to pass back a handle by which the created task
+ * can be referenced.
+ *
+ * @return pdPASS if the task was successfully created and added to a ready
+ * list, otherwise an error code defined in the file projdefs.h
+ *
+ * Example usage:
+
+// Create an TaskParameters_t structure that defines the task to be created.
+static const TaskParameters_t xCheckTaskParameters =
+{
+ vATask, // pvTaskCode - the function that implements the task.
+ "ATask", // pcName - just a text name for the task to assist debugging.
+ 100, // usStackDepth - the stack size DEFINED IN WORDS.
+ NULL, // pvParameters - passed into the task function as the function parameters.
+ ( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.
+ cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.
+
+ // xRegions - Allocate up to three separate memory regions for access by
+ // the task, with appropriate access permissions. Different processors have
+ // different memory alignment requirements - refer to the FreeRTOS documentation
+ // for full information.
+ {
+ // Base address Length Parameters
+ { cReadWriteArray, 32, portMPU_REGION_READ_WRITE },
+ { cReadOnlyArray, 32, portMPU_REGION_READ_ONLY },
+ { cPrivilegedOnlyAccessArray, 128, portMPU_REGION_PRIVILEGED_READ_WRITE }
+ }
+};
+
+int main( void )
+{
+TaskHandle_t xHandle;
+
+ // Create a task from the const structure defined above. The task handle
+ // is requested (the second parameter is not NULL) but in this case just for
+ // demonstration purposes as its not actually used.
+ xTaskCreateRestricted( &xRegTest1Parameters, &xHandle );
+
+ // Start the scheduler.
+ vTaskStartScheduler();
+
+ // Will only get here if there was insufficient memory to create the idle
+ // and/or timer task.
+ for( ;; );
+}
+
+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted
+ * \ingroup Tasks
+ */
+#if( portUSING_MPU_WRAPPERS == 1 )
+ BaseType_t xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask ) PRIVILEGED_FUNCTION;
+#endif
+
+/**
+ * task. h
+ *
+ void vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions );
+ *
+ * Memory regions are assigned to a restricted task when the task is created by
+ * a call to xTaskCreateRestricted(). These regions can be redefined using
+ * vTaskAllocateMPURegions().
+ *
+ * @param xTask The handle of the task being updated.
+ *
+ * @param xRegions A pointer to an MemoryRegion_t structure that contains the
+ * new memory region definitions.
+ *
+ * Example usage:
+
+// Define an array of MemoryRegion_t structures that configures an MPU region
+// allowing read/write access for 1024 bytes starting at the beginning of the
+// ucOneKByte array. The other two of the maximum 3 definable regions are
+// unused so set to zero.
+static const MemoryRegion_t xAltRegions[ portNUM_CONFIGURABLE_REGIONS ] =
+{
+ // Base address Length Parameters
+ { ucOneKByte, 1024, portMPU_REGION_READ_WRITE },
+ { 0, 0, 0 },
+ { 0, 0, 0 }
+};
+
+void vATask( void *pvParameters )
+{
+ // This task was created such that it has access to certain regions of
+ // memory as defined by the MPU configuration. At some point it is
+ // desired that these MPU regions are replaced with that defined in the
+ // xAltRegions const struct above. Use a call to vTaskAllocateMPURegions()
+ // for this purpose. NULL is used as the task handle to indicate that this
+ // function should modify the MPU regions of the calling task.
+ vTaskAllocateMPURegions( NULL, xAltRegions );
+
+ // Now the task can continue its function, but from this point on can only
+ // access its stack and the ucOneKByte array (unless any other statically
+ // defined or shared regions have been declared elsewhere).
+}
+
+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted
+ * \ingroup Tasks
+ */
+void vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskDelete( TaskHandle_t xTask );
+ *
+ * INCLUDE_vTaskDelete must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Remove a task from the RTOS real time kernel's management. The task being
+ * deleted will be removed from all ready, blocked, suspended and event lists.
+ *
+ * NOTE: The idle task is responsible for freeing the kernel allocated
+ * memory from tasks that have been deleted. It is therefore important that
+ * the idle task is not starved of microcontroller processing time if your
+ * application makes any calls to vTaskDelete (). Memory allocated by the
+ * task code is not automatically freed, and should be freed before the task
+ * is deleted.
+ *
+ * See the demo application file death.c for sample code that utilises
+ * vTaskDelete ().
+ *
+ * @param xTask The handle of the task to be deleted. Passing NULL will
+ * cause the calling task to be deleted.
+ *
+ * Example usage:
+
+ void vOtherFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+ // Create the task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // Use the handle to delete the task.
+ vTaskDelete( xHandle );
+ }
+
+ * \defgroup vTaskDelete vTaskDelete
+ * \ingroup Tasks
+ */
+void vTaskDelete( TaskHandle_t xTaskToDelete ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * TASK CONTROL API
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * void vTaskDelay( const TickType_t xTicksToDelay );
+ *
+ * Delay a task for a given number of ticks. The actual time that the
+ * task remains blocked depends on the tick rate. The constant
+ * portTICK_PERIOD_MS can be used to calculate real time from the tick
+ * rate - with the resolution of one tick period.
+ *
+ * INCLUDE_vTaskDelay must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ *
+ * vTaskDelay() specifies a time at which the task wishes to unblock relative to
+ * the time at which vTaskDelay() is called. For example, specifying a block
+ * period of 100 ticks will cause the task to unblock 100 ticks after
+ * vTaskDelay() is called. vTaskDelay() does not therefore provide a good method
+ * of controlling the frequency of a periodic task as the path taken through the
+ * code, as well as other task and interrupt activity, will effect the frequency
+ * at which vTaskDelay() gets called and therefore the time at which the task
+ * next executes. See vTaskDelayUntil() for an alternative API function designed
+ * to facilitate fixed frequency execution. It does this by specifying an
+ * absolute time (rather than a relative time) at which the calling task should
+ * unblock.
+ *
+ * @param xTicksToDelay The amount of time, in tick periods, that
+ * the calling task should block.
+ *
+ * Example usage:
+
+ void vTaskFunction( void * pvParameters )
+ {
+ // Block for 500ms.
+ const TickType_t xDelay = 500 / portTICK_PERIOD_MS;
+
+ for( ;; )
+ {
+ // Simply toggle the LED every 500ms, blocking between each toggle.
+ vToggleLED();
+ vTaskDelay( xDelay );
+ }
+ }
+
+ * \defgroup vTaskDelay vTaskDelay
+ * \ingroup TaskCtrl
+ */
+void vTaskDelay( const TickType_t xTicksToDelay ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskDelayUntil( TickType_t *pxPreviousWakeTime, const TickType_t xTimeIncrement );
+ *
+ * INCLUDE_vTaskDelayUntil must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Delay a task until a specified time. This function can be used by periodic
+ * tasks to ensure a constant execution frequency.
+ *
+ * This function differs from vTaskDelay () in one important aspect: vTaskDelay () will
+ * cause a task to block for the specified number of ticks from the time vTaskDelay () is
+ * called. It is therefore difficult to use vTaskDelay () by itself to generate a fixed
+ * execution frequency as the time between a task starting to execute and that task
+ * calling vTaskDelay () may not be fixed [the task may take a different path though the
+ * code between calls, or may get interrupted or preempted a different number of times
+ * each time it executes].
+ *
+ * Whereas vTaskDelay () specifies a wake time relative to the time at which the function
+ * is called, vTaskDelayUntil () specifies the absolute (exact) time at which it wishes to
+ * unblock.
+ *
+ * The constant portTICK_PERIOD_MS can be used to calculate real time from the tick
+ * rate - with the resolution of one tick period.
+ *
+ * @param pxPreviousWakeTime Pointer to a variable that holds the time at which the
+ * task was last unblocked. The variable must be initialised with the current time
+ * prior to its first use (see the example below). Following this the variable is
+ * automatically updated within vTaskDelayUntil ().
+ *
+ * @param xTimeIncrement The cycle time period. The task will be unblocked at
+ * time *pxPreviousWakeTime + xTimeIncrement. Calling vTaskDelayUntil with the
+ * same xTimeIncrement parameter value will cause the task to execute with
+ * a fixed interface period.
+ *
+ * Example usage:
+
+ // Perform an action every 10 ticks.
+ void vTaskFunction( void * pvParameters )
+ {
+ TickType_t xLastWakeTime;
+ const TickType_t xFrequency = 10;
+
+ // Initialise the xLastWakeTime variable with the current time.
+ xLastWakeTime = xTaskGetTickCount ();
+ for( ;; )
+ {
+ // Wait for the next cycle.
+ vTaskDelayUntil( &xLastWakeTime, xFrequency );
+
+ // Perform action here.
+ }
+ }
+
+ * \defgroup vTaskDelayUntil vTaskDelayUntil
+ * \ingroup TaskCtrl
+ */
+void vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * BaseType_t xTaskAbortDelay( TaskHandle_t xTask );
+ *
+ * INCLUDE_xTaskAbortDelay must be defined as 1 in FreeRTOSConfig.h for this
+ * function to be available.
+ *
+ * A task will enter the Blocked state when it is waiting for an event. The
+ * event it is waiting for can be a temporal event (waiting for a time), such
+ * as when vTaskDelay() is called, or an event on an object, such as when
+ * xQueueReceive() or ulTaskNotifyTake() is called. If the handle of a task
+ * that is in the Blocked state is used in a call to xTaskAbortDelay() then the
+ * task will leave the Blocked state, and return from whichever function call
+ * placed the task into the Blocked state.
+ *
+ * @param xTask The handle of the task to remove from the Blocked state.
+ *
+ * @return If the task referenced by xTask was not in the Blocked state then
+ * pdFAIL is returned. Otherwise pdPASS is returned.
+ *
+ * \defgroup xTaskAbortDelay xTaskAbortDelay
+ * \ingroup TaskCtrl
+ */
+BaseType_t xTaskAbortDelay( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * UBaseType_t uxTaskPriorityGet( TaskHandle_t xTask );
+ *
+ * INCLUDE_uxTaskPriorityGet must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Obtain the priority of any task.
+ *
+ * @param xTask Handle of the task to be queried. Passing a NULL
+ * handle results in the priority of the calling task being returned.
+ *
+ * @return The priority of xTask.
+ *
+ * Example usage:
+
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+ // Create a task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // ...
+
+ // Use the handle to obtain the priority of the created task.
+ // It was created with tskIDLE_PRIORITY, but may have changed
+ // it itself.
+ if( uxTaskPriorityGet( xHandle ) != tskIDLE_PRIORITY )
+ {
+ // The task has changed it's priority.
+ }
+
+ // ...
+
+ // Is our priority higher than the created task?
+ if( uxTaskPriorityGet( xHandle ) < uxTaskPriorityGet( NULL ) )
+ {
+ // Our priority (obtained using NULL handle) is higher.
+ }
+ }
+
+ * \defgroup uxTaskPriorityGet uxTaskPriorityGet
+ * \ingroup TaskCtrl
+ */
+UBaseType_t uxTaskPriorityGet( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * UBaseType_t uxTaskPriorityGetFromISR( TaskHandle_t xTask );
+ *
+ * A version of uxTaskPriorityGet() that can be used from an ISR.
+ */
+UBaseType_t uxTaskPriorityGetFromISR( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * eTaskState eTaskGetState( TaskHandle_t xTask );
+ *
+ * INCLUDE_eTaskGetState must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Obtain the state of any task. States are encoded by the eTaskState
+ * enumerated type.
+ *
+ * @param xTask Handle of the task to be queried.
+ *
+ * @return The state of xTask at the time the function was called. Note the
+ * state of the task might change between the function being called, and the
+ * functions return value being tested by the calling task.
+ */
+eTaskState eTaskGetState( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState );
+ *
+ * configUSE_TRACE_FACILITY must be defined as 1 for this function to be
+ * available. See the configuration section for more information.
+ *
+ * Populates a TaskStatus_t structure with information about a task.
+ *
+ * @param xTask Handle of the task being queried. If xTask is NULL then
+ * information will be returned about the calling task.
+ *
+ * @param pxTaskStatus A pointer to the TaskStatus_t structure that will be
+ * filled with information about the task referenced by the handle passed using
+ * the xTask parameter.
+ *
+ * @xGetFreeStackSpace The TaskStatus_t structure contains a member to report
+ * the stack high water mark of the task being queried. Calculating the stack
+ * high water mark takes a relatively long time, and can make the system
+ * temporarily unresponsive - so the xGetFreeStackSpace parameter is provided to
+ * allow the high water mark checking to be skipped. The high watermark value
+ * will only be written to the TaskStatus_t structure if xGetFreeStackSpace is
+ * not set to pdFALSE;
+ *
+ * @param eState The TaskStatus_t structure contains a member to report the
+ * state of the task being queried. Obtaining the task state is not as fast as
+ * a simple assignment - so the eState parameter is provided to allow the state
+ * information to be omitted from the TaskStatus_t structure. To obtain state
+ * information then set eState to eInvalid - otherwise the value passed in
+ * eState will be reported as the task state in the TaskStatus_t structure.
+ *
+ * Example usage:
+
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+ TaskStatus_t xTaskDetails;
+
+ // Obtain the handle of a task from its name.
+ xHandle = xTaskGetHandle( "Task_Name" );
+
+ // Check the handle is not NULL.
+ configASSERT( xHandle );
+
+ // Use the handle to obtain further information about the task.
+ vTaskGetInfo( xHandle,
+ &xTaskDetails,
+ pdTRUE, // Include the high water mark in xTaskDetails.
+ eInvalid ); // Include the task state in xTaskDetails.
+ }
+
+ * \defgroup vTaskGetInfo vTaskGetInfo
+ * \ingroup TaskCtrl
+ */
+void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority );
+ *
+ * INCLUDE_vTaskPrioritySet must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Set the priority of any task.
+ *
+ * A context switch will occur before the function returns if the priority
+ * being set is higher than the currently executing task.
+ *
+ * @param xTask Handle to the task for which the priority is being set.
+ * Passing a NULL handle results in the priority of the calling task being set.
+ *
+ * @param uxNewPriority The priority to which the task will be set.
+ *
+ * Example usage:
+
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+ // Create a task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // ...
+
+ // Use the handle to raise the priority of the created task.
+ vTaskPrioritySet( xHandle, tskIDLE_PRIORITY + 1 );
+
+ // ...
+
+ // Use a NULL handle to raise our priority to the same value.
+ vTaskPrioritySet( NULL, tskIDLE_PRIORITY + 1 );
+ }
+
+ * \defgroup vTaskPrioritySet vTaskPrioritySet
+ * \ingroup TaskCtrl
+ */
+void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskSuspend( TaskHandle_t xTaskToSuspend );
+ *
+ * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Suspend any task. When suspended a task will never get any microcontroller
+ * processing time, no matter what its priority.
+ *
+ * Calls to vTaskSuspend are not accumulative -
+ * i.e. calling vTaskSuspend () twice on the same task still only requires one
+ * call to vTaskResume () to ready the suspended task.
+ *
+ * @param xTaskToSuspend Handle to the task being suspended. Passing a NULL
+ * handle will cause the calling task to be suspended.
+ *
+ * Example usage:
+
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+ // Create a task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // ...
+
+ // Use the handle to suspend the created task.
+ vTaskSuspend( xHandle );
+
+ // ...
+
+ // The created task will not run during this period, unless
+ // another task calls vTaskResume( xHandle ).
+
+ //...
+
+
+ // Suspend ourselves.
+ vTaskSuspend( NULL );
+
+ // We cannot get here unless another task calls vTaskResume
+ // with our handle as the parameter.
+ }
+
+ * \defgroup vTaskSuspend vTaskSuspend
+ * \ingroup TaskCtrl
+ */
+void vTaskSuspend( TaskHandle_t xTaskToSuspend ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskResume( TaskHandle_t xTaskToResume );
+ *
+ * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Resumes a suspended task.
+ *
+ * A task that has been suspended by one or more calls to vTaskSuspend ()
+ * will be made available for running again by a single call to
+ * vTaskResume ().
+ *
+ * @param xTaskToResume Handle to the task being readied.
+ *
+ * Example usage:
+
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+ // Create a task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // ...
+
+ // Use the handle to suspend the created task.
+ vTaskSuspend( xHandle );
+
+ // ...
+
+ // The created task will not run during this period, unless
+ // another task calls vTaskResume( xHandle ).
+
+ //...
+
+
+ // Resume the suspended task ourselves.
+ vTaskResume( xHandle );
+
+ // The created task will once again get microcontroller processing
+ // time in accordance with its priority within the system.
+ }
+
+ * \defgroup vTaskResume vTaskResume
+ * \ingroup TaskCtrl
+ */
+void vTaskResume( TaskHandle_t xTaskToResume ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void xTaskResumeFromISR( TaskHandle_t xTaskToResume );
+ *
+ * INCLUDE_xTaskResumeFromISR must be defined as 1 for this function to be
+ * available. See the configuration section for more information.
+ *
+ * An implementation of vTaskResume() that can be called from within an ISR.
+ *
+ * A task that has been suspended by one or more calls to vTaskSuspend ()
+ * will be made available for running again by a single call to
+ * xTaskResumeFromISR ().
+ *
+ * xTaskResumeFromISR() should not be used to synchronise a task with an
+ * interrupt if there is a chance that the interrupt could arrive prior to the
+ * task being suspended - as this can lead to interrupts being missed. Use of a
+ * semaphore as a synchronisation mechanism would avoid this eventuality.
+ *
+ * @param xTaskToResume Handle to the task being readied.
+ *
+ * @return pdTRUE if resuming the task should result in a context switch,
+ * otherwise pdFALSE. This is used by the ISR to determine if a context switch
+ * may be required following the ISR.
+ *
+ * \defgroup vTaskResumeFromISR vTaskResumeFromISR
+ * \ingroup TaskCtrl
+ */
+BaseType_t xTaskResumeFromISR( TaskHandle_t xTaskToResume ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * SCHEDULER CONTROL
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * void vTaskStartScheduler( void );
+ *
+ * Starts the real time kernel tick processing. After calling the kernel
+ * has control over which tasks are executed and when.
+ *
+ * See the demo application file main.c for an example of creating
+ * tasks and starting the kernel.
+ *
+ * Example usage:
+
+ void vAFunction( void )
+ {
+ // Create at least one task before starting the kernel.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+
+ // Start the real time kernel with preemption.
+ vTaskStartScheduler ();
+
+ // Will not get here unless a task calls vTaskEndScheduler ()
+ }
+
+ *
+ * \defgroup vTaskStartScheduler vTaskStartScheduler
+ * \ingroup SchedulerControl
+ */
+void vTaskStartScheduler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskEndScheduler( void );
+ *
+ * NOTE: At the time of writing only the x86 real mode port, which runs on a PC
+ * in place of DOS, implements this function.
+ *
+ * Stops the real time kernel tick. All created tasks will be automatically
+ * deleted and multitasking (either preemptive or cooperative) will
+ * stop. Execution then resumes from the point where vTaskStartScheduler ()
+ * was called, as if vTaskStartScheduler () had just returned.
+ *
+ * See the demo application file main. c in the demo/PC directory for an
+ * example that uses vTaskEndScheduler ().
+ *
+ * vTaskEndScheduler () requires an exit function to be defined within the
+ * portable layer (see vPortEndScheduler () in port. c for the PC port). This
+ * performs hardware specific operations such as stopping the kernel tick.
+ *
+ * vTaskEndScheduler () will cause all of the resources allocated by the
+ * kernel to be freed - but will not free resources allocated by application
+ * tasks.
+ *
+ * Example usage:
+
+ void vTaskCode( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // Task code goes here.
+
+ // At some point we want to end the real time kernel processing
+ // so call ...
+ vTaskEndScheduler ();
+ }
+ }
+
+ void vAFunction( void )
+ {
+ // Create at least one task before starting the kernel.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+
+ // Start the real time kernel with preemption.
+ vTaskStartScheduler ();
+
+ // Will only get here when the vTaskCode () task has called
+ // vTaskEndScheduler (). When we get here we are back to single task
+ // execution.
+ }
+
+ *
+ * \defgroup vTaskEndScheduler vTaskEndScheduler
+ * \ingroup SchedulerControl
+ */
+void vTaskEndScheduler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskSuspendAll( void );
+ *
+ * Suspends the scheduler without disabling interrupts. Context switches will
+ * not occur while the scheduler is suspended.
+ *
+ * After calling vTaskSuspendAll () the calling task will continue to execute
+ * without risk of being swapped out until a call to xTaskResumeAll () has been
+ * made.
+ *
+ * API functions that have the potential to cause a context switch (for example,
+ * vTaskDelayUntil(), xQueueSend(), etc.) must not be called while the scheduler
+ * is suspended.
+ *
+ * Example usage:
+
+ void vTask1( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // Task code goes here.
+
+ // ...
+
+ // At some point the task wants to perform a long operation during
+ // which it does not want to get swapped out. It cannot use
+ // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the
+ // operation may cause interrupts to be missed - including the
+ // ticks.
+
+ // Prevent the real time kernel swapping out the task.
+ vTaskSuspendAll ();
+
+ // Perform the operation here. There is no need to use critical
+ // sections as we have all the microcontroller processing time.
+ // During this time interrupts will still operate and the kernel
+ // tick count will be maintained.
+
+ // ...
+
+ // The operation is complete. Restart the kernel.
+ xTaskResumeAll ();
+ }
+ }
+
+ * \defgroup vTaskSuspendAll vTaskSuspendAll
+ * \ingroup SchedulerControl
+ */
+void vTaskSuspendAll( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * BaseType_t xTaskResumeAll( void );
+ *
+ * Resumes scheduler activity after it was suspended by a call to
+ * vTaskSuspendAll().
+ *
+ * xTaskResumeAll() only resumes the scheduler. It does not unsuspend tasks
+ * that were previously suspended by a call to vTaskSuspend().
+ *
+ * @return If resuming the scheduler caused a context switch then pdTRUE is
+ * returned, otherwise pdFALSE is returned.
+ *
+ * Example usage:
+
+ void vTask1( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // Task code goes here.
+
+ // ...
+
+ // At some point the task wants to perform a long operation during
+ // which it does not want to get swapped out. It cannot use
+ // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the
+ // operation may cause interrupts to be missed - including the
+ // ticks.
+
+ // Prevent the real time kernel swapping out the task.
+ vTaskSuspendAll ();
+
+ // Perform the operation here. There is no need to use critical
+ // sections as we have all the microcontroller processing time.
+ // During this time interrupts will still operate and the real
+ // time kernel tick count will be maintained.
+
+ // ...
+
+ // The operation is complete. Restart the kernel. We want to force
+ // a context switch - but there is no point if resuming the scheduler
+ // caused a context switch already.
+ if( !xTaskResumeAll () )
+ {
+ taskYIELD ();
+ }
+ }
+ }
+
+ * \defgroup xTaskResumeAll xTaskResumeAll
+ * \ingroup SchedulerControl
+ */
+BaseType_t xTaskResumeAll( void ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * TASK UTILITIES
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * TickType_t xTaskGetTickCount( void );
+ *
+ * @return The count of ticks since vTaskStartScheduler was called.
+ *
+ * \defgroup xTaskGetTickCount xTaskGetTickCount
+ * \ingroup TaskUtils
+ */
+TickType_t xTaskGetTickCount( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * TickType_t xTaskGetTickCountFromISR( void );
+ *
+ * @return The count of ticks since vTaskStartScheduler was called.
+ *
+ * This is a version of xTaskGetTickCount() that is safe to be called from an
+ * ISR - provided that TickType_t is the natural word size of the
+ * microcontroller being used or interrupt nesting is either not supported or
+ * not being used.
+ *
+ * \defgroup xTaskGetTickCountFromISR xTaskGetTickCountFromISR
+ * \ingroup TaskUtils
+ */
+TickType_t xTaskGetTickCountFromISR( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * uint16_t uxTaskGetNumberOfTasks( void );
+ *
+ * @return The number of tasks that the real time kernel is currently managing.
+ * This includes all ready, blocked and suspended tasks. A task that
+ * has been deleted but not yet freed by the idle task will also be
+ * included in the count.
+ *
+ * \defgroup uxTaskGetNumberOfTasks uxTaskGetNumberOfTasks
+ * \ingroup TaskUtils
+ */
+UBaseType_t uxTaskGetNumberOfTasks( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * char *pcTaskGetName( TaskHandle_t xTaskToQuery );
+ *
+ * @return The text (human readable) name of the task referenced by the handle
+ * xTaskToQuery. A task can query its own name by either passing in its own
+ * handle, or by setting xTaskToQuery to NULL.
+ *
+ * \defgroup pcTaskGetName pcTaskGetName
+ * \ingroup TaskUtils
+ */
+char *pcTaskGetName( TaskHandle_t xTaskToQuery ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * task. h
+ * TaskHandle_t xTaskGetHandle( const char *pcNameToQuery );
+ *
+ * NOTE: This function takes a relatively long time to complete and should be
+ * used sparingly.
+ *
+ * @return The handle of the task that has the human readable name pcNameToQuery.
+ * NULL is returned if no matching name is found. INCLUDE_xTaskGetHandle
+ * must be set to 1 in FreeRTOSConfig.h for pcTaskGetHandle() to be available.
+ *
+ * \defgroup pcTaskGetHandle pcTaskGetHandle
+ * \ingroup TaskUtils
+ */
+TaskHandle_t xTaskGetHandle( const char *pcNameToQuery ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * task.h
+ * UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask );
+ *
+ * INCLUDE_uxTaskGetStackHighWaterMark must be set to 1 in FreeRTOSConfig.h for
+ * this function to be available.
+ *
+ * Returns the high water mark of the stack associated with xTask. That is,
+ * the minimum free stack space there has been (in words, so on a 32 bit machine
+ * a value of 1 means 4 bytes) since the task started. The smaller the returned
+ * number the closer the task has come to overflowing its stack.
+ *
+ * @param xTask Handle of the task associated with the stack to be checked.
+ * Set xTask to NULL to check the stack of the calling task.
+ *
+ * @return The smallest amount of free stack space there has been (in words, so
+ * actual spaces on the stack rather than bytes) since the task referenced by
+ * xTask was created.
+ */
+UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/* When using trace macros it is sometimes necessary to include task.h before
+FreeRTOS.h. When this is done TaskHookFunction_t will not yet have been defined,
+so the following two prototypes will cause a compilation error. This can be
+fixed by simply guarding against the inclusion of these two prototypes unless
+they are explicitly required by the configUSE_APPLICATION_TASK_TAG configuration
+constant. */
+#ifdef configUSE_APPLICATION_TASK_TAG
+ #if configUSE_APPLICATION_TASK_TAG == 1
+ /**
+ * task.h
+ * void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction );
+ *
+ * Sets pxHookFunction to be the task hook function used by the task xTask.
+ * Passing xTask as NULL has the effect of setting the calling tasks hook
+ * function.
+ */
+ void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction ) PRIVILEGED_FUNCTION;
+
+ /**
+ * task.h
+ * void xTaskGetApplicationTaskTag( TaskHandle_t xTask );
+ *
+ * Returns the pxHookFunction value assigned to the task xTask.
+ */
+ TaskHookFunction_t xTaskGetApplicationTaskTag( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+ #endif /* configUSE_APPLICATION_TASK_TAG ==1 */
+#endif /* ifdef configUSE_APPLICATION_TASK_TAG */
+
+#if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 )
+
+ /* Each task contains an array of pointers that is dimensioned by the
+ configNUM_THREAD_LOCAL_STORAGE_POINTERS setting in FreeRTOSConfig.h. The
+ kernel does not use the pointers itself, so the application writer can use
+ the pointers for any purpose they wish. The following two functions are
+ used to set and query a pointer respectively. */
+ void vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue ) PRIVILEGED_FUNCTION;
+ void *pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/**
+ * task.h
+ * BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter );
+ *
+ * Calls the hook function associated with xTask. Passing xTask as NULL has
+ * the effect of calling the Running tasks (the calling task) hook function.
+ *
+ * pvParameter is passed to the hook function for the task to interpret as it
+ * wants. The return value is the value returned by the task hook function
+ * registered by the user.
+ */
+BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter ) PRIVILEGED_FUNCTION;
+
+/**
+ * xTaskGetIdleTaskHandle() is only available if
+ * INCLUDE_xTaskGetIdleTaskHandle is set to 1 in FreeRTOSConfig.h.
+ *
+ * Simply returns the handle of the idle task. It is not valid to call
+ * xTaskGetIdleTaskHandle() before the scheduler has been started.
+ */
+TaskHandle_t xTaskGetIdleTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * configUSE_TRACE_FACILITY must be defined as 1 in FreeRTOSConfig.h for
+ * uxTaskGetSystemState() to be available.
+ *
+ * uxTaskGetSystemState() populates an TaskStatus_t structure for each task in
+ * the system. TaskStatus_t structures contain, among other things, members
+ * for the task handle, task name, task priority, task state, and total amount
+ * of run time consumed by the task. See the TaskStatus_t structure
+ * definition in this file for the full member list.
+ *
+ * NOTE: This function is intended for debugging use only as its use results in
+ * the scheduler remaining suspended for an extended period.
+ *
+ * @param pxTaskStatusArray A pointer to an array of TaskStatus_t structures.
+ * The array must contain at least one TaskStatus_t structure for each task
+ * that is under the control of the RTOS. The number of tasks under the control
+ * of the RTOS can be determined using the uxTaskGetNumberOfTasks() API function.
+ *
+ * @param uxArraySize The size of the array pointed to by the pxTaskStatusArray
+ * parameter. The size is specified as the number of indexes in the array, or
+ * the number of TaskStatus_t structures contained in the array, not by the
+ * number of bytes in the array.
+ *
+ * @param pulTotalRunTime If configGENERATE_RUN_TIME_STATS is set to 1 in
+ * FreeRTOSConfig.h then *pulTotalRunTime is set by uxTaskGetSystemState() to the
+ * total run time (as defined by the run time stats clock, see
+ * http://www.freertos.org/rtos-run-time-stats.html) since the target booted.
+ * pulTotalRunTime can be set to NULL to omit the total run time information.
+ *
+ * @return The number of TaskStatus_t structures that were populated by
+ * uxTaskGetSystemState(). This should equal the number returned by the
+ * uxTaskGetNumberOfTasks() API function, but will be zero if the value passed
+ * in the uxArraySize parameter was too small.
+ *
+ * Example usage:
+
+ // This example demonstrates how a human readable table of run time stats
+ // information is generated from raw data provided by uxTaskGetSystemState().
+ // The human readable table is written to pcWriteBuffer
+ void vTaskGetRunTimeStats( char *pcWriteBuffer )
+ {
+ TaskStatus_t *pxTaskStatusArray;
+ volatile UBaseType_t uxArraySize, x;
+ uint32_t ulTotalRunTime, ulStatsAsPercentage;
+
+ // Make sure the write buffer does not contain a string.
+ *pcWriteBuffer = 0x00;
+
+ // Take a snapshot of the number of tasks in case it changes while this
+ // function is executing.
+ uxArraySize = uxTaskGetNumberOfTasks();
+
+ // Allocate a TaskStatus_t structure for each task. An array could be
+ // allocated statically at compile time.
+ pxTaskStatusArray = pvPortMalloc( uxArraySize * sizeof( TaskStatus_t ) );
+
+ if( pxTaskStatusArray != NULL )
+ {
+ // Generate raw status information about each task.
+ uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, &ulTotalRunTime );
+
+ // For percentage calculations.
+ ulTotalRunTime /= 100UL;
+
+ // Avoid divide by zero errors.
+ if( ulTotalRunTime > 0 )
+ {
+ // For each populated position in the pxTaskStatusArray array,
+ // format the raw data as human readable ASCII data
+ for( x = 0; x < uxArraySize; x++ )
+ {
+ // What percentage of the total run time has the task used?
+ // This will always be rounded down to the nearest integer.
+ // ulTotalRunTimeDiv100 has already been divided by 100.
+ ulStatsAsPercentage = pxTaskStatusArray[ x ].ulRunTimeCounter / ulTotalRunTime;
+
+ if( ulStatsAsPercentage > 0UL )
+ {
+ sprintf( pcWriteBuffer, "%s\t\t%lu\t\t%lu%%\r\n", pxTaskStatusArray[ x ].pcTaskName, pxTaskStatusArray[ x ].ulRunTimeCounter, ulStatsAsPercentage );
+ }
+ else
+ {
+ // If the percentage is zero here then the task has
+ // consumed less than 1% of the total run time.
+ sprintf( pcWriteBuffer, "%s\t\t%lu\t\t<1%%\r\n", pxTaskStatusArray[ x ].pcTaskName, pxTaskStatusArray[ x ].ulRunTimeCounter );
+ }
+
+ pcWriteBuffer += strlen( ( char * ) pcWriteBuffer );
+ }
+ }
+
+ // The array is no longer needed, free the memory it consumes.
+ vPortFree( pxTaskStatusArray );
+ }
+ }
+
+ */
+UBaseType_t uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * void vTaskList( char *pcWriteBuffer );
+ *
+ * configUSE_TRACE_FACILITY and configUSE_STATS_FORMATTING_FUNCTIONS must
+ * both be defined as 1 for this function to be available. See the
+ * configuration section of the FreeRTOS.org website for more information.
+ *
+ * NOTE 1: This function will disable interrupts for its duration. It is
+ * not intended for normal application runtime use but as a debug aid.
+ *
+ * Lists all the current tasks, along with their current state and stack
+ * usage high water mark.
+ *
+ * Tasks are reported as blocked ('B'), ready ('R'), deleted ('D') or
+ * suspended ('S').
+ *
+ * PLEASE NOTE:
+ *
+ * This function is provided for convenience only, and is used by many of the
+ * demo applications. Do not consider it to be part of the scheduler.
+ *
+ * vTaskList() calls uxTaskGetSystemState(), then formats part of the
+ * uxTaskGetSystemState() output into a human readable table that displays task
+ * names, states and stack usage.
+ *
+ * vTaskList() has a dependency on the sprintf() C library function that might
+ * bloat the code size, use a lot of stack, and provide different results on
+ * different platforms. An alternative, tiny, third party, and limited
+ * functionality implementation of sprintf() is provided in many of the
+ * FreeRTOS/Demo sub-directories in a file called printf-stdarg.c (note
+ * printf-stdarg.c does not provide a full snprintf() implementation!).
+ *
+ * It is recommended that production systems call uxTaskGetSystemState()
+ * directly to get access to raw stats data, rather than indirectly through a
+ * call to vTaskList().
+ *
+ * @param pcWriteBuffer A buffer into which the above mentioned details
+ * will be written, in ASCII form. This buffer is assumed to be large
+ * enough to contain the generated report. Approximately 40 bytes per
+ * task should be sufficient.
+ *
+ * \defgroup vTaskList vTaskList
+ * \ingroup TaskUtils
+ */
+void vTaskList( char * pcWriteBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * task. h
+ * void vTaskGetRunTimeStats( char *pcWriteBuffer );
+ *
+ * configGENERATE_RUN_TIME_STATS and configUSE_STATS_FORMATTING_FUNCTIONS
+ * must both be defined as 1 for this function to be available. The application
+ * must also then provide definitions for
+ * portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() and portGET_RUN_TIME_COUNTER_VALUE()
+ * to configure a peripheral timer/counter and return the timers current count
+ * value respectively. The counter should be at least 10 times the frequency of
+ * the tick count.
+ *
+ * NOTE 1: This function will disable interrupts for its duration. It is
+ * not intended for normal application runtime use but as a debug aid.
+ *
+ * Setting configGENERATE_RUN_TIME_STATS to 1 will result in a total
+ * accumulated execution time being stored for each task. The resolution
+ * of the accumulated time value depends on the frequency of the timer
+ * configured by the portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() macro.
+ * Calling vTaskGetRunTimeStats() writes the total execution time of each
+ * task into a buffer, both as an absolute count value and as a percentage
+ * of the total system execution time.
+ *
+ * NOTE 2:
+ *
+ * This function is provided for convenience only, and is used by many of the
+ * demo applications. Do not consider it to be part of the scheduler.
+ *
+ * vTaskGetRunTimeStats() calls uxTaskGetSystemState(), then formats part of the
+ * uxTaskGetSystemState() output into a human readable table that displays the
+ * amount of time each task has spent in the Running state in both absolute and
+ * percentage terms.
+ *
+ * vTaskGetRunTimeStats() has a dependency on the sprintf() C library function
+ * that might bloat the code size, use a lot of stack, and provide different
+ * results on different platforms. An alternative, tiny, third party, and
+ * limited functionality implementation of sprintf() is provided in many of the
+ * FreeRTOS/Demo sub-directories in a file called printf-stdarg.c (note
+ * printf-stdarg.c does not provide a full snprintf() implementation!).
+ *
+ * It is recommended that production systems call uxTaskGetSystemState() directly
+ * to get access to raw stats data, rather than indirectly through a call to
+ * vTaskGetRunTimeStats().
+ *
+ * @param pcWriteBuffer A buffer into which the execution times will be
+ * written, in ASCII form. This buffer is assumed to be large enough to
+ * contain the generated report. Approximately 40 bytes per task should
+ * be sufficient.
+ *
+ * \defgroup vTaskGetRunTimeStats vTaskGetRunTimeStats
+ * \ingroup TaskUtils
+ */
+void vTaskGetRunTimeStats( char *pcWriteBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * task. h
+ * BaseType_t xTaskNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction );
+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object. Examples of such
+ * objects are queues, semaphores, mutexes and event groups. Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value. In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * A notification sent to a task will remain pending until it is cleared by the
+ * task calling xTaskNotifyWait() or ulTaskNotifyTake(). If the task was
+ * already in the Blocked state to wait for a notification when the notification
+ * arrives then the task will automatically be removed from the Blocked state
+ * (unblocked) and the notification cleared.
+ *
+ * A task can use xTaskNotifyWait() to [optionally] block to wait for a
+ * notification to be pending, or ulTaskNotifyTake() to [optionally] block
+ * to wait for its notification value to have a non-zero value. The task does
+ * not consume any CPU time while it is in the Blocked state.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param xTaskToNotify The handle of the task being notified. The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @param ulValue Data that can be sent with the notification. How the data is
+ * used depends on the value of the eAction parameter.
+ *
+ * @param eAction Specifies how the notification updates the task's notification
+ * value, if at all. Valid values for eAction are as follows:
+ *
+ * eSetBits -
+ * The task's notification value is bitwise ORed with ulValue. xTaskNofify()
+ * always returns pdPASS in this case.
+ *
+ * eIncrement -
+ * The task's notification value is incremented. ulValue is not used and
+ * xTaskNotify() always returns pdPASS in this case.
+ *
+ * eSetValueWithOverwrite -
+ * The task's notification value is set to the value of ulValue, even if the
+ * task being notified had not yet processed the previous notification (the
+ * task already had a notification pending). xTaskNotify() always returns
+ * pdPASS in this case.
+ *
+ * eSetValueWithoutOverwrite -
+ * If the task being notified did not already have a notification pending then
+ * the task's notification value is set to ulValue and xTaskNotify() will
+ * return pdPASS. If the task being notified already had a notification
+ * pending then no action is performed and pdFAIL is returned.
+ *
+ * eNoAction -
+ * The task receives a notification without its notification value being
+ * updated. ulValue is not used and xTaskNotify() always returns pdPASS in
+ * this case.
+ *
+ * pulPreviousNotificationValue -
+ * Can be used to pass out the subject task's notification value before any
+ * bits are modified by the notify function.
+ *
+ * @return Dependent on the value of eAction. See the description of the
+ * eAction parameter.
+ *
+ * \defgroup xTaskNotify xTaskNotify
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue ) PRIVILEGED_FUNCTION;
+#define xTaskNotify( xTaskToNotify, ulValue, eAction ) xTaskGenericNotify( ( xTaskToNotify ), ( ulValue ), ( eAction ), NULL )
+#define xTaskNotifyAndQuery( xTaskToNotify, ulValue, eAction, pulPreviousNotifyValue ) xTaskGenericNotify( ( xTaskToNotify ), ( ulValue ), ( eAction ), ( pulPreviousNotifyValue ) )
+
+/**
+ * task. h
+ * BaseType_t xTaskNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * A version of xTaskNotify() that can be used from an interrupt service routine
+ * (ISR).
+ *
+ * Events can be sent to a task using an intermediary object. Examples of such
+ * objects are queues, semaphores, mutexes and event groups. Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value. In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * A notification sent to a task will remain pending until it is cleared by the
+ * task calling xTaskNotifyWait() or ulTaskNotifyTake(). If the task was
+ * already in the Blocked state to wait for a notification when the notification
+ * arrives then the task will automatically be removed from the Blocked state
+ * (unblocked) and the notification cleared.
+ *
+ * A task can use xTaskNotifyWait() to [optionally] block to wait for a
+ * notification to be pending, or ulTaskNotifyTake() to [optionally] block
+ * to wait for its notification value to have a non-zero value. The task does
+ * not consume any CPU time while it is in the Blocked state.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param xTaskToNotify The handle of the task being notified. The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @param ulValue Data that can be sent with the notification. How the data is
+ * used depends on the value of the eAction parameter.
+ *
+ * @param eAction Specifies how the notification updates the task's notification
+ * value, if at all. Valid values for eAction are as follows:
+ *
+ * eSetBits -
+ * The task's notification value is bitwise ORed with ulValue. xTaskNofify()
+ * always returns pdPASS in this case.
+ *
+ * eIncrement -
+ * The task's notification value is incremented. ulValue is not used and
+ * xTaskNotify() always returns pdPASS in this case.
+ *
+ * eSetValueWithOverwrite -
+ * The task's notification value is set to the value of ulValue, even if the
+ * task being notified had not yet processed the previous notification (the
+ * task already had a notification pending). xTaskNotify() always returns
+ * pdPASS in this case.
+ *
+ * eSetValueWithoutOverwrite -
+ * If the task being notified did not already have a notification pending then
+ * the task's notification value is set to ulValue and xTaskNotify() will
+ * return pdPASS. If the task being notified already had a notification
+ * pending then no action is performed and pdFAIL is returned.
+ *
+ * eNoAction -
+ * The task receives a notification without its notification value being
+ * updated. ulValue is not used and xTaskNotify() always returns pdPASS in
+ * this case.
+ *
+ * @param pxHigherPriorityTaskWoken xTaskNotifyFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending the notification caused the
+ * task to which the notification was sent to leave the Blocked state, and the
+ * unblocked task has a priority higher than the currently running task. If
+ * xTaskNotifyFromISR() sets this value to pdTRUE then a context switch should
+ * be requested before the interrupt is exited. How a context switch is
+ * requested from an ISR is dependent on the port - see the documentation page
+ * for the port in use.
+ *
+ * @return Dependent on the value of eAction. See the description of the
+ * eAction parameter.
+ *
+ * \defgroup xTaskNotify xTaskNotify
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskGenericNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+#define xTaskNotifyFromISR( xTaskToNotify, ulValue, eAction, pxHigherPriorityTaskWoken ) xTaskGenericNotifyFromISR( ( xTaskToNotify ), ( ulValue ), ( eAction ), NULL, ( pxHigherPriorityTaskWoken ) )
+#define xTaskNotifyAndQueryFromISR( xTaskToNotify, ulValue, eAction, pulPreviousNotificationValue, pxHigherPriorityTaskWoken ) xTaskGenericNotifyFromISR( ( xTaskToNotify ), ( ulValue ), ( eAction ), ( pulPreviousNotificationValue ), ( pxHigherPriorityTaskWoken ) )
+
+/**
+ * task. h
+ * BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait );
+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object. Examples of such
+ * objects are queues, semaphores, mutexes and event groups. Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value. In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * A notification sent to a task will remain pending until it is cleared by the
+ * task calling xTaskNotifyWait() or ulTaskNotifyTake(). If the task was
+ * already in the Blocked state to wait for a notification when the notification
+ * arrives then the task will automatically be removed from the Blocked state
+ * (unblocked) and the notification cleared.
+ *
+ * A task can use xTaskNotifyWait() to [optionally] block to wait for a
+ * notification to be pending, or ulTaskNotifyTake() to [optionally] block
+ * to wait for its notification value to have a non-zero value. The task does
+ * not consume any CPU time while it is in the Blocked state.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param ulBitsToClearOnEntry Bits that are set in ulBitsToClearOnEntry value
+ * will be cleared in the calling task's notification value before the task
+ * checks to see if any notifications are pending, and optionally blocks if no
+ * notifications are pending. Setting ulBitsToClearOnEntry to ULONG_MAX (if
+ * limits.h is included) or 0xffffffffUL (if limits.h is not included) will have
+ * the effect of resetting the task's notification value to 0. Setting
+ * ulBitsToClearOnEntry to 0 will leave the task's notification value unchanged.
+ *
+ * @param ulBitsToClearOnExit If a notification is pending or received before
+ * the calling task exits the xTaskNotifyWait() function then the task's
+ * notification value (see the xTaskNotify() API function) is passed out using
+ * the pulNotificationValue parameter. Then any bits that are set in
+ * ulBitsToClearOnExit will be cleared in the task's notification value (note
+ * *pulNotificationValue is set before any bits are cleared). Setting
+ * ulBitsToClearOnExit to ULONG_MAX (if limits.h is included) or 0xffffffffUL
+ * (if limits.h is not included) will have the effect of resetting the task's
+ * notification value to 0 before the function exits. Setting
+ * ulBitsToClearOnExit to 0 will leave the task's notification value unchanged
+ * when the function exits (in which case the value passed out in
+ * pulNotificationValue will match the task's notification value).
+ *
+ * @param pulNotificationValue Used to pass the task's notification value out
+ * of the function. Note the value passed out will not be effected by the
+ * clearing of any bits caused by ulBitsToClearOnExit being non-zero.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait in
+ * the Blocked state for a notification to be received, should a notification
+ * not already be pending when xTaskNotifyWait() was called. The task
+ * will not consume any processing time while it is in the Blocked state. This
+ * is specified in kernel ticks, the macro pdMS_TO_TICSK( value_in_ms ) can be
+ * used to convert a time specified in milliseconds to a time specified in
+ * ticks.
+ *
+ * @return If a notification was received (including notifications that were
+ * already pending when xTaskNotifyWait was called) then pdPASS is
+ * returned. Otherwise pdFAIL is returned.
+ *
+ * \defgroup xTaskNotifyWait xTaskNotifyWait
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * BaseType_t xTaskNotifyGive( TaskHandle_t xTaskToNotify );
+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this macro
+ * to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object. Examples of such
+ * objects are queues, semaphores, mutexes and event groups. Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value. In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * xTaskNotifyGive() is a helper macro intended for use when task notifications
+ * are used as light weight and faster binary or counting semaphore equivalents.
+ * Actual FreeRTOS semaphores are given using the xSemaphoreGive() API function,
+ * the equivalent action that instead uses a task notification is
+ * xTaskNotifyGive().
+ *
+ * When task notifications are being used as a binary or counting semaphore
+ * equivalent then the task being notified should wait for the notification
+ * using the ulTaskNotificationTake() API function rather than the
+ * xTaskNotifyWait() API function.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for more details.
+ *
+ * @param xTaskToNotify The handle of the task being notified. The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @return xTaskNotifyGive() is a macro that calls xTaskNotify() with the
+ * eAction parameter set to eIncrement - so pdPASS is always returned.
+ *
+ * \defgroup xTaskNotifyGive xTaskNotifyGive
+ * \ingroup TaskNotifications
+ */
+#define xTaskNotifyGive( xTaskToNotify ) xTaskGenericNotify( ( xTaskToNotify ), ( 0 ), eIncrement, NULL )
+
+/**
+ * task. h
+ * void vTaskNotifyGiveFromISR( TaskHandle_t xTaskHandle, BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this macro
+ * to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * A version of xTaskNotifyGive() that can be called from an interrupt service
+ * routine (ISR).
+ *
+ * Events can be sent to a task using an intermediary object. Examples of such
+ * objects are queues, semaphores, mutexes and event groups. Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value. In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * vTaskNotifyGiveFromISR() is intended for use when task notifications are
+ * used as light weight and faster binary or counting semaphore equivalents.
+ * Actual FreeRTOS semaphores are given from an ISR using the
+ * xSemaphoreGiveFromISR() API function, the equivalent action that instead uses
+ * a task notification is vTaskNotifyGiveFromISR().
+ *
+ * When task notifications are being used as a binary or counting semaphore
+ * equivalent then the task being notified should wait for the notification
+ * using the ulTaskNotificationTake() API function rather than the
+ * xTaskNotifyWait() API function.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for more details.
+ *
+ * @param xTaskToNotify The handle of the task being notified. The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @param pxHigherPriorityTaskWoken vTaskNotifyGiveFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending the notification caused the
+ * task to which the notification was sent to leave the Blocked state, and the
+ * unblocked task has a priority higher than the currently running task. If
+ * vTaskNotifyGiveFromISR() sets this value to pdTRUE then a context switch
+ * should be requested before the interrupt is exited. How a context switch is
+ * requested from an ISR is dependent on the port - see the documentation page
+ * for the port in use.
+ *
+ * \defgroup xTaskNotifyWait xTaskNotifyWait
+ * \ingroup TaskNotifications
+ */
+void vTaskNotifyGiveFromISR( TaskHandle_t xTaskToNotify, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait );
+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object. Examples of such
+ * objects are queues, semaphores, mutexes and event groups. Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value. In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * ulTaskNotifyTake() is intended for use when a task notification is used as a
+ * faster and lighter weight binary or counting semaphore alternative. Actual
+ * FreeRTOS semaphores are taken using the xSemaphoreTake() API function, the
+ * equivalent action that instead uses a task notification is
+ * ulTaskNotifyTake().
+ *
+ * When a task is using its notification value as a binary or counting semaphore
+ * other tasks should send notifications to it using the xTaskNotifyGive()
+ * macro, or xTaskNotify() function with the eAction parameter set to
+ * eIncrement.
+ *
+ * ulTaskNotifyTake() can either clear the task's notification value to
+ * zero on exit, in which case the notification value acts like a binary
+ * semaphore, or decrement the task's notification value on exit, in which case
+ * the notification value acts like a counting semaphore.
+ *
+ * A task can use ulTaskNotifyTake() to [optionally] block to wait for a
+ * the task's notification value to be non-zero. The task does not consume any
+ * CPU time while it is in the Blocked state.
+ *
+ * Where as xTaskNotifyWait() will return when a notification is pending,
+ * ulTaskNotifyTake() will return when the task's notification value is
+ * not zero.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param xClearCountOnExit if xClearCountOnExit is pdFALSE then the task's
+ * notification value is decremented when the function exits. In this way the
+ * notification value acts like a counting semaphore. If xClearCountOnExit is
+ * not pdFALSE then the task's notification value is cleared to zero when the
+ * function exits. In this way the notification value acts like a binary
+ * semaphore.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait in
+ * the Blocked state for the task's notification value to be greater than zero,
+ * should the count not already be greater than zero when
+ * ulTaskNotifyTake() was called. The task will not consume any processing
+ * time while it is in the Blocked state. This is specified in kernel ticks,
+ * the macro pdMS_TO_TICSK( value_in_ms ) can be used to convert a time
+ * specified in milliseconds to a time specified in ticks.
+ *
+ * @return The task's notification count before it is either cleared to zero or
+ * decremented (see the xClearCountOnExit parameter).
+ *
+ * \defgroup ulTaskNotifyTake ulTaskNotifyTake
+ * \ingroup TaskNotifications
+ */
+uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask );
+ *
+ * If the notification state of the task referenced by the handle xTask is
+ * eNotified, then set the task's notification state to eNotWaitingNotification.
+ * The task's notification value is not altered. Set xTask to NULL to clear the
+ * notification state of the calling task.
+ *
+ * @return pdTRUE if the task's notification state was set to
+ * eNotWaitingNotification, otherwise pdFALSE.
+ * \defgroup xTaskNotifyStateClear xTaskNotifyStateClear
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask );
+
+/*-----------------------------------------------------------
+ * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES
+ *----------------------------------------------------------*/
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS ONLY
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * Called from the real time kernel tick (either preemptive or cooperative),
+ * this increments the tick count and checks if any tasks that are blocked
+ * for a finite period required removing from a blocked list and placing on
+ * a ready list. If a non-zero value is returned then a context switch is
+ * required because either:
+ * + A task was removed from a blocked list because its timeout had expired,
+ * or
+ * + Time slicing is in use and there is a task of equal priority to the
+ * currently running task.
+ */
+BaseType_t xTaskIncrementTick( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * Removes the calling task from the ready list and places it both
+ * on the list of tasks waiting for a particular event, and the
+ * list of delayed tasks. The task will be removed from both lists
+ * and replaced on the ready list should either the event occur (and
+ * there be no higher priority tasks waiting on the same event) or
+ * the delay period expires.
+ *
+ * The 'unordered' version replaces the event list item value with the
+ * xItemValue value, and inserts the list item at the end of the list.
+ *
+ * The 'ordered' version uses the existing event list item value (which is the
+ * owning tasks priority) to insert the list item into the event list is task
+ * priority order.
+ *
+ * @param pxEventList The list containing tasks that are blocked waiting
+ * for the event to occur.
+ *
+ * @param xItemValue The item value to use for the event list item when the
+ * event list is not ordered by task priority.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait
+ * for the event to occur. This is specified in kernel ticks,the constant
+ * portTICK_PERIOD_MS can be used to convert kernel ticks into a real time
+ * period.
+ */
+void vTaskPlaceOnEventList( List_t * const pxEventList, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+void vTaskPlaceOnUnorderedEventList( List_t * pxEventList, const TickType_t xItemValue, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * This function performs nearly the same function as vTaskPlaceOnEventList().
+ * The difference being that this function does not permit tasks to block
+ * indefinitely, whereas vTaskPlaceOnEventList() does.
+ *
+ */
+void vTaskPlaceOnEventListRestricted( List_t * const pxEventList, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * Removes a task from both the specified event list and the list of blocked
+ * tasks, and places it on a ready queue.
+ *
+ * xTaskRemoveFromEventList()/xTaskRemoveFromUnorderedEventList() will be called
+ * if either an event occurs to unblock a task, or the block timeout period
+ * expires.
+ *
+ * xTaskRemoveFromEventList() is used when the event list is in task priority
+ * order. It removes the list item from the head of the event list as that will
+ * have the highest priority owning task of all the tasks on the event list.
+ * xTaskRemoveFromUnorderedEventList() is used when the event list is not
+ * ordered and the event list items hold something other than the owning tasks
+ * priority. In this case the event list item value is updated to the value
+ * passed in the xItemValue parameter.
+ *
+ * @return pdTRUE if the task being removed has a higher priority than the task
+ * making the call, otherwise pdFALSE.
+ */
+BaseType_t xTaskRemoveFromEventList( const List_t * const pxEventList ) PRIVILEGED_FUNCTION;
+BaseType_t xTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, const TickType_t xItemValue ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS ONLY
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * Sets the pointer to the current TCB to the TCB of the highest priority task
+ * that is ready to run.
+ */
+void vTaskSwitchContext( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * THESE FUNCTIONS MUST NOT BE USED FROM APPLICATION CODE. THEY ARE USED BY
+ * THE EVENT BITS MODULE.
+ */
+TickType_t uxTaskResetEventItemValue( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Return the handle of the calling task.
+ */
+TaskHandle_t xTaskGetCurrentTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Capture the current time status for future reference.
+ */
+void vTaskSetTimeOutState( TimeOut_t * const pxTimeOut ) PRIVILEGED_FUNCTION;
+
+/*
+ * Compare the time status now with that previously captured to see if the
+ * timeout has expired.
+ */
+BaseType_t xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * Shortcut used by the queue implementation to prevent unnecessary call to
+ * taskYIELD();
+ */
+void vTaskMissedYield( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Returns the scheduler state as taskSCHEDULER_RUNNING,
+ * taskSCHEDULER_NOT_STARTED or taskSCHEDULER_SUSPENDED.
+ */
+BaseType_t xTaskGetSchedulerState( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Raises the priority of the mutex holder to that of the calling task should
+ * the mutex holder have a priority less than the calling task.
+ */
+void vTaskPriorityInherit( TaskHandle_t const pxMutexHolder ) PRIVILEGED_FUNCTION;
+
+/*
+ * Set the priority of a task back to its proper priority in the case that it
+ * inherited a higher priority while it was holding a semaphore.
+ */
+BaseType_t xTaskPriorityDisinherit( TaskHandle_t const pxMutexHolder ) PRIVILEGED_FUNCTION;
+
+/*
+ * Get the uxTCBNumber assigned to the task referenced by the xTask parameter.
+ */
+UBaseType_t uxTaskGetTaskNumber( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/*
+ * Set the uxTaskNumber of the task referenced by the xTask parameter to
+ * uxHandle.
+ */
+void vTaskSetTaskNumber( TaskHandle_t xTask, const UBaseType_t uxHandle ) PRIVILEGED_FUNCTION;
+
+/*
+ * Only available when configUSE_TICKLESS_IDLE is set to 1.
+ * If tickless mode is being used, or a low power mode is implemented, then
+ * the tick interrupt will not execute during idle periods. When this is the
+ * case, the tick count value maintained by the scheduler needs to be kept up
+ * to date with the actual execution time by being skipped forward by a time
+ * equal to the idle period.
+ */
+void vTaskStepTick( const TickType_t xTicksToJump ) PRIVILEGED_FUNCTION;
+
+/*
+ * Only avilable when configUSE_TICKLESS_IDLE is set to 1.
+ * Provided for use within portSUPPRESS_TICKS_AND_SLEEP() to allow the port
+ * specific sleep function to determine if it is ok to proceed with the sleep,
+ * and if it is ok to proceed, if it is ok to sleep indefinitely.
+ *
+ * This function is necessary because portSUPPRESS_TICKS_AND_SLEEP() is only
+ * called with the scheduler suspended, not from within a critical section. It
+ * is therefore possible for an interrupt to request a context switch between
+ * portSUPPRESS_TICKS_AND_SLEEP() and the low power mode actually being
+ * entered. eTaskConfirmSleepModeStatus() should be called from a short
+ * critical section between the timer being stopped and the sleep mode being
+ * entered to ensure it is ok to proceed into the sleep mode.
+ */
+eSleepModeStatus eTaskConfirmSleepModeStatus( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * For internal use only. Increment the mutex held count when a mutex is
+ * taken and return the handle of the task that has taken the mutex.
+ */
+void *pvTaskIncrementMutexHeldCount( void ) PRIVILEGED_FUNCTION;
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* INC_TASK_H */
+
+
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/timers.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/timers.h
new file mode 100644
index 0000000..798c955
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/include/timers.h
@@ -0,0 +1,1314 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+
+#ifndef TIMERS_H
+#define TIMERS_H
+
+#ifndef INC_FREERTOS_H
+ #error "include FreeRTOS.h must appear in source files before include timers.h"
+#endif
+
+/*lint -e537 This headers are only multiply included if the application code
+happens to also be including task.h. */
+#include "task.h"
+/*lint +e537 */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * MACROS AND DEFINITIONS
+ *----------------------------------------------------------*/
+
+/* IDs for commands that can be sent/received on the timer queue. These are to
+be used solely through the macros that make up the public software timer API,
+as defined below. The commands that are sent from interrupts must use the
+highest numbers as tmrFIRST_FROM_ISR_COMMAND is used to determine if the task
+or interrupt version of the queue send function should be used. */
+#define tmrCOMMAND_EXECUTE_CALLBACK_FROM_ISR ( ( BaseType_t ) -2 )
+#define tmrCOMMAND_EXECUTE_CALLBACK ( ( BaseType_t ) -1 )
+#define tmrCOMMAND_START_DONT_TRACE ( ( BaseType_t ) 0 )
+#define tmrCOMMAND_START ( ( BaseType_t ) 1 )
+#define tmrCOMMAND_RESET ( ( BaseType_t ) 2 )
+#define tmrCOMMAND_STOP ( ( BaseType_t ) 3 )
+#define tmrCOMMAND_CHANGE_PERIOD ( ( BaseType_t ) 4 )
+#define tmrCOMMAND_DELETE ( ( BaseType_t ) 5 )
+
+#define tmrFIRST_FROM_ISR_COMMAND ( ( BaseType_t ) 6 )
+#define tmrCOMMAND_START_FROM_ISR ( ( BaseType_t ) 6 )
+#define tmrCOMMAND_RESET_FROM_ISR ( ( BaseType_t ) 7 )
+#define tmrCOMMAND_STOP_FROM_ISR ( ( BaseType_t ) 8 )
+#define tmrCOMMAND_CHANGE_PERIOD_FROM_ISR ( ( BaseType_t ) 9 )
+
+
+/**
+ * Type by which software timers are referenced. For example, a call to
+ * xTimerCreate() returns an TimerHandle_t variable that can then be used to
+ * reference the subject timer in calls to other software timer API functions
+ * (for example, xTimerStart(), xTimerReset(), etc.).
+ */
+typedef void * TimerHandle_t;
+
+/*
+ * Defines the prototype to which timer callback functions must conform.
+ */
+typedef void (*TimerCallbackFunction_t)( TimerHandle_t xTimer );
+
+/*
+ * Defines the prototype to which functions used with the
+ * xTimerPendFunctionCallFromISR() function must conform.
+ */
+typedef void (*PendedFunction_t)( void *, uint32_t );
+
+/**
+ * TimerHandle_t xTimerCreate( const char * const pcTimerName,
+ * TickType_t xTimerPeriodInTicks,
+ * UBaseType_t uxAutoReload,
+ * void * pvTimerID,
+ * TimerCallbackFunction_t pxCallbackFunction );
+ *
+ * Creates a new software timer instance, and returns a handle by which the
+ * created software timer can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, software timers use a block
+ * of memory, in which the timer data structure is stored. If a software timer
+ * is created using xTimerCreate() then the required memory is automatically
+ * dynamically allocated inside the xTimerCreate() function. (see
+ * http://www.freertos.org/a00111.html). If a software timer is created using
+ * xTimerCreateStatic() then the application writer must provide the memory that
+ * will get used by the software timer. xTimerCreateStatic() therefore allows a
+ * software timer to be created without using any dynamic memory allocation.
+ *
+ * Timers are created in the dormant state. The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a
+ * timer into the active state.
+ *
+ * @param pcTimerName A text name that is assigned to the timer. This is done
+ * purely to assist debugging. The kernel itself only ever references a timer
+ * by its handle, and never by its name.
+ *
+ * @param xTimerPeriodInTicks The timer period. The time is defined in tick
+ * periods so the constant portTICK_PERIOD_MS can be used to convert a time that
+ * has been specified in milliseconds. For example, if the timer must expire
+ * after 100 ticks, then xTimerPeriodInTicks should be set to 100.
+ * Alternatively, if the timer must expire after 500ms, then xPeriod can be set
+ * to ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than or
+ * equal to 1000.
+ *
+ * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will
+ * expire repeatedly with a frequency set by the xTimerPeriodInTicks parameter.
+ * If uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and
+ * enter the dormant state after it expires.
+ *
+ * @param pvTimerID An identifier that is assigned to the timer being created.
+ * Typically this would be used in the timer callback function to identify which
+ * timer expired when the same callback function is assigned to more than one
+ * timer.
+ *
+ * @param pxCallbackFunction The function to call when the timer expires.
+ * Callback functions must have the prototype defined by TimerCallbackFunction_t,
+ * which is "void vCallbackFunction( TimerHandle_t xTimer );".
+ *
+ * @return If the timer is successfully created then a handle to the newly
+ * created timer is returned. If the timer cannot be created (because either
+ * there is insufficient FreeRTOS heap remaining to allocate the timer
+ * structures, or the timer period was set to 0) then NULL is returned.
+ *
+ * Example usage:
+ * @verbatim
+ * #define NUM_TIMERS 5
+ *
+ * // An array to hold handles to the created timers.
+ * TimerHandle_t xTimers[ NUM_TIMERS ];
+ *
+ * // An array to hold a count of the number of times each timer expires.
+ * int32_t lExpireCounters[ NUM_TIMERS ] = { 0 };
+ *
+ * // Define a callback function that will be used by multiple timer instances.
+ * // The callback function does nothing but count the number of times the
+ * // associated timer expires, and stop the timer once the timer has expired
+ * // 10 times.
+ * void vTimerCallback( TimerHandle_t pxTimer )
+ * {
+ * int32_t lArrayIndex;
+ * const int32_t xMaxExpiryCountBeforeStopping = 10;
+ *
+ * // Optionally do something if the pxTimer parameter is NULL.
+ * configASSERT( pxTimer );
+ *
+ * // Which timer expired?
+ * lArrayIndex = ( int32_t ) pvTimerGetTimerID( pxTimer );
+ *
+ * // Increment the number of times that pxTimer has expired.
+ * lExpireCounters[ lArrayIndex ] += 1;
+ *
+ * // If the timer has expired 10 times then stop it from running.
+ * if( lExpireCounters[ lArrayIndex ] == xMaxExpiryCountBeforeStopping )
+ * {
+ * // Do not use a block time if calling a timer API function from a
+ * // timer callback function, as doing so could cause a deadlock!
+ * xTimerStop( pxTimer, 0 );
+ * }
+ * }
+ *
+ * void main( void )
+ * {
+ * int32_t x;
+ *
+ * // Create then start some timers. Starting the timers before the scheduler
+ * // has been started means the timers will start running immediately that
+ * // the scheduler starts.
+ * for( x = 0; x < NUM_TIMERS; x++ )
+ * {
+ * xTimers[ x ] = xTimerCreate( "Timer", // Just a text name, not used by the kernel.
+ * ( 100 * x ), // The timer period in ticks.
+ * pdTRUE, // The timers will auto-reload themselves when they expire.
+ * ( void * ) x, // Assign each timer a unique id equal to its array index.
+ * vTimerCallback // Each timer calls the same callback when it expires.
+ * );
+ *
+ * if( xTimers[ x ] == NULL )
+ * {
+ * // The timer was not created.
+ * }
+ * else
+ * {
+ * // Start the timer. No block time is specified, and even if one was
+ * // it would be ignored because the scheduler has not yet been
+ * // started.
+ * if( xTimerStart( xTimers[ x ], 0 ) != pdPASS )
+ * {
+ * // The timer could not be set into the Active state.
+ * }
+ * }
+ * }
+ *
+ * // ...
+ * // Create tasks here.
+ * // ...
+ *
+ * // Starting the scheduler will start the timers running as they have already
+ * // been set into the active state.
+ * vTaskStartScheduler();
+ *
+ * // Should not reach here.
+ * for( ;; );
+ * }
+ * @endverbatim
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ TimerHandle_t xTimerCreate( const char * const pcTimerName,
+ const TickType_t xTimerPeriodInTicks,
+ const UBaseType_t uxAutoReload,
+ void * const pvTimerID,
+ TimerCallbackFunction_t pxCallbackFunction ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif
+
+/**
+ * TimerHandle_t xTimerCreateStatic(const char * const pcTimerName,
+ * TickType_t xTimerPeriodInTicks,
+ * UBaseType_t uxAutoReload,
+ * void * pvTimerID,
+ * TimerCallbackFunction_t pxCallbackFunction,
+ * StaticTimer_t *pxTimerBuffer );
+ *
+ * Creates a new software timer instance, and returns a handle by which the
+ * created software timer can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, software timers use a block
+ * of memory, in which the timer data structure is stored. If a software timer
+ * is created using xTimerCreate() then the required memory is automatically
+ * dynamically allocated inside the xTimerCreate() function. (see
+ * http://www.freertos.org/a00111.html). If a software timer is created using
+ * xTimerCreateStatic() then the application writer must provide the memory that
+ * will get used by the software timer. xTimerCreateStatic() therefore allows a
+ * software timer to be created without using any dynamic memory allocation.
+ *
+ * Timers are created in the dormant state. The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a
+ * timer into the active state.
+ *
+ * @param pcTimerName A text name that is assigned to the timer. This is done
+ * purely to assist debugging. The kernel itself only ever references a timer
+ * by its handle, and never by its name.
+ *
+ * @param xTimerPeriodInTicks The timer period. The time is defined in tick
+ * periods so the constant portTICK_PERIOD_MS can be used to convert a time that
+ * has been specified in milliseconds. For example, if the timer must expire
+ * after 100 ticks, then xTimerPeriodInTicks should be set to 100.
+ * Alternatively, if the timer must expire after 500ms, then xPeriod can be set
+ * to ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than or
+ * equal to 1000.
+ *
+ * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will
+ * expire repeatedly with a frequency set by the xTimerPeriodInTicks parameter.
+ * If uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and
+ * enter the dormant state after it expires.
+ *
+ * @param pvTimerID An identifier that is assigned to the timer being created.
+ * Typically this would be used in the timer callback function to identify which
+ * timer expired when the same callback function is assigned to more than one
+ * timer.
+ *
+ * @param pxCallbackFunction The function to call when the timer expires.
+ * Callback functions must have the prototype defined by TimerCallbackFunction_t,
+ * which is "void vCallbackFunction( TimerHandle_t xTimer );".
+ *
+ * @param pxTimerBuffer Must point to a variable of type StaticTimer_t, which
+ * will be then be used to hold the software timer's data structures, removing
+ * the need for the memory to be allocated dynamically.
+ *
+ * @return If the timer is created then a handle to the created timer is
+ * returned. If pxTimerBuffer was NULL then NULL is returned.
+ *
+ * Example usage:
+ * @verbatim
+ *
+ * // The buffer used to hold the software timer's data structure.
+ * static StaticTimer_t xTimerBuffer;
+ *
+ * // A variable that will be incremented by the software timer's callback
+ * // function.
+ * UBaseType_t uxVariableToIncrement = 0;
+ *
+ * // A software timer callback function that increments a variable passed to
+ * // it when the software timer was created. After the 5th increment the
+ * // callback function stops the software timer.
+ * static void prvTimerCallback( TimerHandle_t xExpiredTimer )
+ * {
+ * UBaseType_t *puxVariableToIncrement;
+ * BaseType_t xReturned;
+ *
+ * // Obtain the address of the variable to increment from the timer ID.
+ * puxVariableToIncrement = ( UBaseType_t * ) pvTimerGetTimerID( xExpiredTimer );
+ *
+ * // Increment the variable to show the timer callback has executed.
+ * ( *puxVariableToIncrement )++;
+ *
+ * // If this callback has executed the required number of times, stop the
+ * // timer.
+ * if( *puxVariableToIncrement == 5 )
+ * {
+ * // This is called from a timer callback so must not block.
+ * xTimerStop( xExpiredTimer, staticDONT_BLOCK );
+ * }
+ * }
+ *
+ *
+ * void main( void )
+ * {
+ * // Create the software time. xTimerCreateStatic() has an extra parameter
+ * // than the normal xTimerCreate() API function. The parameter is a pointer
+ * // to the StaticTimer_t structure that will hold the software timer
+ * // structure. If the parameter is passed as NULL then the structure will be
+ * // allocated dynamically, just as if xTimerCreate() had been called.
+ * xTimer = xTimerCreateStatic( "T1", // Text name for the task. Helps debugging only. Not used by FreeRTOS.
+ * xTimerPeriod, // The period of the timer in ticks.
+ * pdTRUE, // This is an auto-reload timer.
+ * ( void * ) &uxVariableToIncrement, // A variable incremented by the software timer's callback function
+ * prvTimerCallback, // The function to execute when the timer expires.
+ * &xTimerBuffer ); // The buffer that will hold the software timer structure.
+ *
+ * // The scheduler has not started yet so a block time is not used.
+ * xReturned = xTimerStart( xTimer, 0 );
+ *
+ * // ...
+ * // Create tasks here.
+ * // ...
+ *
+ * // Starting the scheduler will start the timers running as they have already
+ * // been set into the active state.
+ * vTaskStartScheduler();
+ *
+ * // Should not reach here.
+ * for( ;; );
+ * }
+ * @endverbatim
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ TimerHandle_t xTimerCreateStatic( const char * const pcTimerName,
+ const TickType_t xTimerPeriodInTicks,
+ const UBaseType_t uxAutoReload,
+ void * const pvTimerID,
+ TimerCallbackFunction_t pxCallbackFunction,
+ StaticTimer_t *pxTimerBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * void *pvTimerGetTimerID( TimerHandle_t xTimer );
+ *
+ * Returns the ID assigned to the timer.
+ *
+ * IDs are assigned to timers using the pvTimerID parameter of the call to
+ * xTimerCreated() that was used to create the timer, and by calling the
+ * vTimerSetTimerID() API function.
+ *
+ * If the same callback function is assigned to multiple timers then the timer
+ * ID can be used as time specific (timer local) storage.
+ *
+ * @param xTimer The timer being queried.
+ *
+ * @return The ID assigned to the timer being queried.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ */
+void *pvTimerGetTimerID( const TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+ * void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID );
+ *
+ * Sets the ID assigned to the timer.
+ *
+ * IDs are assigned to timers using the pvTimerID parameter of the call to
+ * xTimerCreated() that was used to create the timer.
+ *
+ * If the same callback function is assigned to multiple timers then the timer
+ * ID can be used as time specific (timer local) storage.
+ *
+ * @param xTimer The timer being updated.
+ *
+ * @param pvNewID The ID to assign to the timer.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ */
+void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID ) PRIVILEGED_FUNCTION;
+
+/**
+ * BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer );
+ *
+ * Queries a timer to see if it is active or dormant.
+ *
+ * A timer will be dormant if:
+ * 1) It has been created but not started, or
+ * 2) It is an expired one-shot timer that has not been restarted.
+ *
+ * Timers are created in the dormant state. The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a timer into the
+ * active state.
+ *
+ * @param xTimer The timer being queried.
+ *
+ * @return pdFALSE will be returned if the timer is dormant. A value other than
+ * pdFALSE will be returned if the timer is active.
+ *
+ * Example usage:
+ * @verbatim
+ * // This function assumes xTimer has already been created.
+ * void vAFunction( TimerHandle_t xTimer )
+ * {
+ * if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"
+ * {
+ * // xTimer is active, do something.
+ * }
+ * else
+ * {
+ * // xTimer is not active, do something else.
+ * }
+ * }
+ * @endverbatim
+ */
+BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+ * TaskHandle_t xTimerGetTimerDaemonTaskHandle( void );
+ *
+ * Simply returns the handle of the timer service/daemon task. It it not valid
+ * to call xTimerGetTimerDaemonTaskHandle() before the scheduler has been started.
+ */
+TaskHandle_t xTimerGetTimerDaemonTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * BaseType_t xTimerStart( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task. Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue. The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code. The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerStart() starts a timer that was previously created using the
+ * xTimerCreate() API function. If the timer had already been started and was
+ * already in the active state, then xTimerStart() has equivalent functionality
+ * to the xTimerReset() API function.
+ *
+ * Starting a timer ensures the timer is in the active state. If the timer
+ * is not stopped, deleted, or reset in the mean time, the callback function
+ * associated with the timer will get called 'n' ticks after xTimerStart() was
+ * called, where 'n' is the timers defined period.
+ *
+ * It is valid to call xTimerStart() before the scheduler has been started, but
+ * when this is done the timer will not actually start until the scheduler is
+ * started, and the timers expiry time will be relative to when the scheduler is
+ * started, not relative to when xTimerStart() was called.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStart()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being started/restarted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the start command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerStart() was called. xTicksToWait is ignored if xTimerStart() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the start command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed. pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system, although the
+ * timers expiry time is relative to when xTimerStart() is actually called. The
+ * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ *
+ */
+#define xTimerStart( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCount() ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerStop( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task. Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue. The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code. The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerStop() stops a timer that was previously started using either of the
+ * The xTimerStart(), xTimerReset(), xTimerStartFromISR(), xTimerResetFromISR(),
+ * xTimerChangePeriod() or xTimerChangePeriodFromISR() API functions.
+ *
+ * Stopping a timer ensures the timer is not in the active state.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStop()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being stopped.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the stop command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerStop() was called. xTicksToWait is ignored if xTimerStop() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the stop command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed. pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system. The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ *
+ */
+#define xTimerStop( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP, 0U, NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerChangePeriod( TimerHandle_t xTimer,
+ * TickType_t xNewPeriod,
+ * TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task. Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue. The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code. The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerChangePeriod() changes the period of a timer that was previously
+ * created using the xTimerCreate() API function.
+ *
+ * xTimerChangePeriod() can be called to change the period of an active or
+ * dormant state timer.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for
+ * xTimerChangePeriod() to be available.
+ *
+ * @param xTimer The handle of the timer that is having its period changed.
+ *
+ * @param xNewPeriod The new period for xTimer. Timer periods are specified in
+ * tick periods, so the constant portTICK_PERIOD_MS can be used to convert a time
+ * that has been specified in milliseconds. For example, if the timer must
+ * expire after 100 ticks, then xNewPeriod should be set to 100. Alternatively,
+ * if the timer must expire after 500ms, then xNewPeriod can be set to
+ * ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than
+ * or equal to 1000.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the change period command to be
+ * successfully sent to the timer command queue, should the queue already be
+ * full when xTimerChangePeriod() was called. xTicksToWait is ignored if
+ * xTimerChangePeriod() is called before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the change period command could not be
+ * sent to the timer command queue even after xTicksToWait ticks had passed.
+ * pdPASS will be returned if the command was successfully sent to the timer
+ * command queue. When the command is actually processed will depend on the
+ * priority of the timer service/daemon task relative to other tasks in the
+ * system. The timer service/daemon task priority is set by the
+ * configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This function assumes xTimer has already been created. If the timer
+ * // referenced by xTimer is already active when it is called, then the timer
+ * // is deleted. If the timer referenced by xTimer is not active when it is
+ * // called, then the period of the timer is set to 500ms and the timer is
+ * // started.
+ * void vAFunction( TimerHandle_t xTimer )
+ * {
+ * if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"
+ * {
+ * // xTimer is already active - delete it.
+ * xTimerDelete( xTimer );
+ * }
+ * else
+ * {
+ * // xTimer is not active, change its period to 500ms. This will also
+ * // cause the timer to start. Block for a maximum of 100 ticks if the
+ * // change period command cannot immediately be sent to the timer
+ * // command queue.
+ * if( xTimerChangePeriod( xTimer, 500 / portTICK_PERIOD_MS, 100 ) == pdPASS )
+ * {
+ * // The command was successfully sent.
+ * }
+ * else
+ * {
+ * // The command could not be sent, even after waiting for 100 ticks
+ * // to pass. Take appropriate action here.
+ * }
+ * }
+ * }
+ * @endverbatim
+ */
+ #define xTimerChangePeriod( xTimer, xNewPeriod, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD, ( xNewPeriod ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerDelete( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task. Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue. The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code. The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerDelete() deletes a timer that was previously created using the
+ * xTimerCreate() API function.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for
+ * xTimerDelete() to be available.
+ *
+ * @param xTimer The handle of the timer being deleted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the delete command to be
+ * successfully sent to the timer command queue, should the queue already be
+ * full when xTimerDelete() was called. xTicksToWait is ignored if xTimerDelete()
+ * is called before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the delete command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed. pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system. The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerChangePeriod() API function example usage scenario.
+ */
+#define xTimerDelete( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_DELETE, 0U, NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerReset( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task. Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue. The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code. The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerReset() re-starts a timer that was previously created using the
+ * xTimerCreate() API function. If the timer had already been started and was
+ * already in the active state, then xTimerReset() will cause the timer to
+ * re-evaluate its expiry time so that it is relative to when xTimerReset() was
+ * called. If the timer was in the dormant state then xTimerReset() has
+ * equivalent functionality to the xTimerStart() API function.
+ *
+ * Resetting a timer ensures the timer is in the active state. If the timer
+ * is not stopped, deleted, or reset in the mean time, the callback function
+ * associated with the timer will get called 'n' ticks after xTimerReset() was
+ * called, where 'n' is the timers defined period.
+ *
+ * It is valid to call xTimerReset() before the scheduler has been started, but
+ * when this is done the timer will not actually start until the scheduler is
+ * started, and the timers expiry time will be relative to when the scheduler is
+ * started, not relative to when xTimerReset() was called.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerReset()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being reset/started/restarted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the reset command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerReset() was called. xTicksToWait is ignored if xTimerReset() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the reset command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed. pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system, although the
+ * timers expiry time is relative to when xTimerStart() is actually called. The
+ * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // When a key is pressed, an LCD back-light is switched on. If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off. In
+ * // this case, the timer is a one-shot timer.
+ *
+ * TimerHandle_t xBacklightTimer = NULL;
+ *
+ * // The callback function assigned to the one-shot timer. In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ * // The timer expired, therefore 5 seconds must have passed since a key
+ * // was pressed. Switch off the LCD back-light.
+ * vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press event handler.
+ * void vKeyPressEventHandler( char cKey )
+ * {
+ * // Ensure the LCD back-light is on, then reset the timer that is
+ * // responsible for turning the back-light off after 5 seconds of
+ * // key inactivity. Wait 10 ticks for the command to be successfully sent
+ * // if it cannot be sent immediately.
+ * vSetBacklightState( BACKLIGHT_ON );
+ * if( xTimerReset( xBacklightTimer, 100 ) != pdPASS )
+ * {
+ * // The reset command was not executed successfully. Take appropriate
+ * // action here.
+ * }
+ *
+ * // Perform the rest of the key processing here.
+ * }
+ *
+ * void main( void )
+ * {
+ * int32_t x;
+ *
+ * // Create then start the one-shot timer that is responsible for turning
+ * // the back-light off if no keys are pressed within a 5 second period.
+ * xBacklightTimer = xTimerCreate( "BacklightTimer", // Just a text name, not used by the kernel.
+ * ( 5000 / portTICK_PERIOD_MS), // The timer period in ticks.
+ * pdFALSE, // The timer is a one-shot timer.
+ * 0, // The id is not used by the callback so can take any value.
+ * vBacklightTimerCallback // The callback function that switches the LCD back-light off.
+ * );
+ *
+ * if( xBacklightTimer == NULL )
+ * {
+ * // The timer was not created.
+ * }
+ * else
+ * {
+ * // Start the timer. No block time is specified, and even if one was
+ * // it would be ignored because the scheduler has not yet been
+ * // started.
+ * if( xTimerStart( xBacklightTimer, 0 ) != pdPASS )
+ * {
+ * // The timer could not be set into the Active state.
+ * }
+ * }
+ *
+ * // ...
+ * // Create tasks here.
+ * // ...
+ *
+ * // Starting the scheduler will start the timer running as it has already
+ * // been set into the active state.
+ * vTaskStartScheduler();
+ *
+ * // Should not reach here.
+ * for( ;; );
+ * }
+ * @endverbatim
+ */
+#define xTimerReset( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_RESET, ( xTaskGetTickCount() ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerStartFromISR( TimerHandle_t xTimer,
+ * BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerStart() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer being started/restarted.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue. Calling xTimerStartFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state. If calling xTimerStartFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerStartFromISR() function. If
+ * xTimerStartFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the start command could not be sent to
+ * the timer command queue. pdPASS will be returned if the command was
+ * successfully sent to the timer command queue. When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system, although the timers expiry time is
+ * relative to when xTimerStartFromISR() is actually called. The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xBacklightTimer has already been created. When a
+ * // key is pressed, an LCD back-light is switched on. If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off. In
+ * // this case, the timer is a one-shot timer, and unlike the example given for
+ * // the xTimerReset() function, the key press event handler is an interrupt
+ * // service routine.
+ *
+ * // The callback function assigned to the one-shot timer. In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ * // The timer expired, therefore 5 seconds must have passed since a key
+ * // was pressed. Switch off the LCD back-light.
+ * vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press interrupt service routine.
+ * void vKeyPressEventInterruptHandler( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ * // Ensure the LCD back-light is on, then restart the timer that is
+ * // responsible for turning the back-light off after 5 seconds of
+ * // key inactivity. This is an interrupt service routine so can only
+ * // call FreeRTOS API functions that end in "FromISR".
+ * vSetBacklightState( BACKLIGHT_ON );
+ *
+ * // xTimerStartFromISR() or xTimerResetFromISR() could be called here
+ * // as both cause the timer to re-calculate its expiry time.
+ * // xHigherPriorityTaskWoken was initialised to pdFALSE when it was
+ * // declared (in this function).
+ * if( xTimerStartFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ * {
+ * // The start command was not executed successfully. Take appropriate
+ * // action here.
+ * }
+ *
+ * // Perform the rest of the key processing here.
+ *
+ * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ * // should be performed. The syntax required to perform a context switch
+ * // from inside an ISR varies from port to port, and from compiler to
+ * // compiler. Inspect the demos for the port you are using to find the
+ * // actual syntax required.
+ * if( xHigherPriorityTaskWoken != pdFALSE )
+ * {
+ * // Call the interrupt safe yield function here (actual function
+ * // depends on the FreeRTOS port being used).
+ * }
+ * }
+ * @endverbatim
+ */
+#define xTimerStartFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START_FROM_ISR, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerStopFromISR( TimerHandle_t xTimer,
+ * BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerStop() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer being stopped.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue. Calling xTimerStopFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state. If calling xTimerStopFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerStopFromISR() function. If
+ * xTimerStopFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the stop command could not be sent to
+ * the timer command queue. pdPASS will be returned if the command was
+ * successfully sent to the timer command queue. When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system. The timer service/daemon task
+ * priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xTimer has already been created and started. When
+ * // an interrupt occurs, the timer should be simply stopped.
+ *
+ * // The interrupt service routine that stops the timer.
+ * void vAnExampleInterruptServiceRoutine( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ * // The interrupt has occurred - simply stop the timer.
+ * // xHigherPriorityTaskWoken was set to pdFALSE where it was defined
+ * // (within this function). As this is an interrupt service routine, only
+ * // FreeRTOS API functions that end in "FromISR" can be used.
+ * if( xTimerStopFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ * {
+ * // The stop command was not executed successfully. Take appropriate
+ * // action here.
+ * }
+ *
+ * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ * // should be performed. The syntax required to perform a context switch
+ * // from inside an ISR varies from port to port, and from compiler to
+ * // compiler. Inspect the demos for the port you are using to find the
+ * // actual syntax required.
+ * if( xHigherPriorityTaskWoken != pdFALSE )
+ * {
+ * // Call the interrupt safe yield function here (actual function
+ * // depends on the FreeRTOS port being used).
+ * }
+ * }
+ * @endverbatim
+ */
+#define xTimerStopFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP_FROM_ISR, 0, ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerChangePeriodFromISR( TimerHandle_t xTimer,
+ * TickType_t xNewPeriod,
+ * BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerChangePeriod() that can be called from an interrupt
+ * service routine.
+ *
+ * @param xTimer The handle of the timer that is having its period changed.
+ *
+ * @param xNewPeriod The new period for xTimer. Timer periods are specified in
+ * tick periods, so the constant portTICK_PERIOD_MS can be used to convert a time
+ * that has been specified in milliseconds. For example, if the timer must
+ * expire after 100 ticks, then xNewPeriod should be set to 100. Alternatively,
+ * if the timer must expire after 500ms, then xNewPeriod can be set to
+ * ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than
+ * or equal to 1000.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue. Calling xTimerChangePeriodFromISR() writes a message to the
+ * timer command queue, so has the potential to transition the timer service/
+ * daemon task out of the Blocked state. If calling xTimerChangePeriodFromISR()
+ * causes the timer service/daemon task to leave the Blocked state, and the
+ * timer service/daemon task has a priority equal to or greater than the
+ * currently executing task (the task that was interrupted), then
+ * *pxHigherPriorityTaskWoken will get set to pdTRUE internally within the
+ * xTimerChangePeriodFromISR() function. If xTimerChangePeriodFromISR() sets
+ * this value to pdTRUE then a context switch should be performed before the
+ * interrupt exits.
+ *
+ * @return pdFAIL will be returned if the command to change the timers period
+ * could not be sent to the timer command queue. pdPASS will be returned if the
+ * command was successfully sent to the timer command queue. When the command
+ * is actually processed will depend on the priority of the timer service/daemon
+ * task relative to other tasks in the system. The timer service/daemon task
+ * priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xTimer has already been created and started. When
+ * // an interrupt occurs, the period of xTimer should be changed to 500ms.
+ *
+ * // The interrupt service routine that changes the period of xTimer.
+ * void vAnExampleInterruptServiceRoutine( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ * // The interrupt has occurred - change the period of xTimer to 500ms.
+ * // xHigherPriorityTaskWoken was set to pdFALSE where it was defined
+ * // (within this function). As this is an interrupt service routine, only
+ * // FreeRTOS API functions that end in "FromISR" can be used.
+ * if( xTimerChangePeriodFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ * {
+ * // The command to change the timers period was not executed
+ * // successfully. Take appropriate action here.
+ * }
+ *
+ * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ * // should be performed. The syntax required to perform a context switch
+ * // from inside an ISR varies from port to port, and from compiler to
+ * // compiler. Inspect the demos for the port you are using to find the
+ * // actual syntax required.
+ * if( xHigherPriorityTaskWoken != pdFALSE )
+ * {
+ * // Call the interrupt safe yield function here (actual function
+ * // depends on the FreeRTOS port being used).
+ * }
+ * }
+ * @endverbatim
+ */
+#define xTimerChangePeriodFromISR( xTimer, xNewPeriod, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD_FROM_ISR, ( xNewPeriod ), ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerResetFromISR( TimerHandle_t xTimer,
+ * BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerReset() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer that is to be started, reset, or
+ * restarted.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue. Calling xTimerResetFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state. If calling xTimerResetFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerResetFromISR() function. If
+ * xTimerResetFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the reset command could not be sent to
+ * the timer command queue. pdPASS will be returned if the command was
+ * successfully sent to the timer command queue. When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system, although the timers expiry time is
+ * relative to when xTimerResetFromISR() is actually called. The timer service/daemon
+ * task priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xBacklightTimer has already been created. When a
+ * // key is pressed, an LCD back-light is switched on. If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off. In
+ * // this case, the timer is a one-shot timer, and unlike the example given for
+ * // the xTimerReset() function, the key press event handler is an interrupt
+ * // service routine.
+ *
+ * // The callback function assigned to the one-shot timer. In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ * // The timer expired, therefore 5 seconds must have passed since a key
+ * // was pressed. Switch off the LCD back-light.
+ * vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press interrupt service routine.
+ * void vKeyPressEventInterruptHandler( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ * // Ensure the LCD back-light is on, then reset the timer that is
+ * // responsible for turning the back-light off after 5 seconds of
+ * // key inactivity. This is an interrupt service routine so can only
+ * // call FreeRTOS API functions that end in "FromISR".
+ * vSetBacklightState( BACKLIGHT_ON );
+ *
+ * // xTimerStartFromISR() or xTimerResetFromISR() could be called here
+ * // as both cause the timer to re-calculate its expiry time.
+ * // xHigherPriorityTaskWoken was initialised to pdFALSE when it was
+ * // declared (in this function).
+ * if( xTimerResetFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ * {
+ * // The reset command was not executed successfully. Take appropriate
+ * // action here.
+ * }
+ *
+ * // Perform the rest of the key processing here.
+ *
+ * // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ * // should be performed. The syntax required to perform a context switch
+ * // from inside an ISR varies from port to port, and from compiler to
+ * // compiler. Inspect the demos for the port you are using to find the
+ * // actual syntax required.
+ * if( xHigherPriorityTaskWoken != pdFALSE )
+ * {
+ * // Call the interrupt safe yield function here (actual function
+ * // depends on the FreeRTOS port being used).
+ * }
+ * }
+ * @endverbatim
+ */
+#define xTimerResetFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_RESET_FROM_ISR, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )
+
+
+/**
+ * BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend,
+ * void *pvParameter1,
+ * uint32_t ulParameter2,
+ * BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ *
+ * Used from application interrupt service routines to defer the execution of a
+ * function to the RTOS daemon task (the timer service task, hence this function
+ * is implemented in timers.c and is prefixed with 'Timer').
+ *
+ * Ideally an interrupt service routine (ISR) is kept as short as possible, but
+ * sometimes an ISR either has a lot of processing to do, or needs to perform
+ * processing that is not deterministic. In these cases
+ * xTimerPendFunctionCallFromISR() can be used to defer processing of a function
+ * to the RTOS daemon task.
+ *
+ * A mechanism is provided that allows the interrupt to return directly to the
+ * task that will subsequently execute the pended callback function. This
+ * allows the callback function to execute contiguously in time with the
+ * interrupt - just as if the callback had executed in the interrupt itself.
+ *
+ * @param xFunctionToPend The function to execute from the timer service/
+ * daemon task. The function must conform to the PendedFunction_t
+ * prototype.
+ *
+ * @param pvParameter1 The value of the callback function's first parameter.
+ * The parameter has a void * type to allow it to be used to pass any type.
+ * For example, unsigned longs can be cast to a void *, or the void * can be
+ * used to point to a structure.
+ *
+ * @param ulParameter2 The value of the callback function's second parameter.
+ *
+ * @param pxHigherPriorityTaskWoken As mentioned above, calling this function
+ * will result in a message being sent to the timer daemon task. If the
+ * priority of the timer daemon task (which is set using
+ * configTIMER_TASK_PRIORITY in FreeRTOSConfig.h) is higher than the priority of
+ * the currently running task (the task the interrupt interrupted) then
+ * *pxHigherPriorityTaskWoken will be set to pdTRUE within
+ * xTimerPendFunctionCallFromISR(), indicating that a context switch should be
+ * requested before the interrupt exits. For that reason
+ * *pxHigherPriorityTaskWoken must be initialised to pdFALSE. See the
+ * example code below.
+ *
+ * @return pdPASS is returned if the message was successfully sent to the
+ * timer daemon task, otherwise pdFALSE is returned.
+ *
+ * Example usage:
+ * @verbatim
+ *
+ * // The callback function that will execute in the context of the daemon task.
+ * // Note callback functions must all use this same prototype.
+ * void vProcessInterface( void *pvParameter1, uint32_t ulParameter2 )
+ * {
+ * BaseType_t xInterfaceToService;
+ *
+ * // The interface that requires servicing is passed in the second
+ * // parameter. The first parameter is not used in this case.
+ * xInterfaceToService = ( BaseType_t ) ulParameter2;
+ *
+ * // ...Perform the processing here...
+ * }
+ *
+ * // An ISR that receives data packets from multiple interfaces
+ * void vAnISR( void )
+ * {
+ * BaseType_t xInterfaceToService, xHigherPriorityTaskWoken;
+ *
+ * // Query the hardware to determine which interface needs processing.
+ * xInterfaceToService = prvCheckInterfaces();
+ *
+ * // The actual processing is to be deferred to a task. Request the
+ * // vProcessInterface() callback function is executed, passing in the
+ * // number of the interface that needs processing. The interface to
+ * // service is passed in the second parameter. The first parameter is
+ * // not used in this case.
+ * xHigherPriorityTaskWoken = pdFALSE;
+ * xTimerPendFunctionCallFromISR( vProcessInterface, NULL, ( uint32_t ) xInterfaceToService, &xHigherPriorityTaskWoken );
+ *
+ * // If xHigherPriorityTaskWoken is now set to pdTRUE then a context
+ * // switch should be requested. The macro used is port specific and will
+ * // be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() - refer to
+ * // the documentation page for the port being used.
+ * portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+ *
+ * }
+ * @endverbatim
+ */
+BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+ /**
+ * BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend,
+ * void *pvParameter1,
+ * uint32_t ulParameter2,
+ * TickType_t xTicksToWait );
+ *
+ *
+ * Used to defer the execution of a function to the RTOS daemon task (the timer
+ * service task, hence this function is implemented in timers.c and is prefixed
+ * with 'Timer').
+ *
+ * @param xFunctionToPend The function to execute from the timer service/
+ * daemon task. The function must conform to the PendedFunction_t
+ * prototype.
+ *
+ * @param pvParameter1 The value of the callback function's first parameter.
+ * The parameter has a void * type to allow it to be used to pass any type.
+ * For example, unsigned longs can be cast to a void *, or the void * can be
+ * used to point to a structure.
+ *
+ * @param ulParameter2 The value of the callback function's second parameter.
+ *
+ * @param xTicksToWait Calling this function will result in a message being
+ * sent to the timer daemon task on a queue. xTicksToWait is the amount of
+ * time the calling task should remain in the Blocked state (so not using any
+ * processing time) for space to become available on the timer queue if the
+ * queue is found to be full.
+ *
+ * @return pdPASS is returned if the message was successfully sent to the
+ * timer daemon task, otherwise pdFALSE is returned.
+ *
+ */
+BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * const char * const pcTimerGetName( TimerHandle_t xTimer );
+ *
+ * Returns the name that was assigned to a timer when the timer was created.
+ *
+ * @param xTimer The handle of the timer being queried.
+ *
+ * @return The name assigned to the timer specified by the xTimer parameter.
+ */
+const char * pcTimerGetName( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * TickType_t xTimerGetPeriod( TimerHandle_t xTimer );
+ *
+ * Returns the period of a timer.
+ *
+ * @param xTimer The handle of the timer being queried.
+ *
+ * @return The period of the timer in ticks.
+ */
+TickType_t xTimerGetPeriod( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+* TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer );
+*
+* Returns the time in ticks at which the timer will expire. If this is less
+* than the current tick count then the expiry time has overflowed from the
+* current time.
+*
+* @param xTimer The handle of the timer being queried.
+*
+* @return If the timer is running then the time in ticks at which the timer
+* will next expire is returned. If the timer is not running then the return
+* value is undefined.
+*/
+TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/*
+ * Functions beyond this part are not part of the public API and are intended
+ * for use by the kernel only.
+ */
+BaseType_t xTimerCreateTimerTask( void ) PRIVILEGED_FUNCTION;
+BaseType_t xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* TIMERS_H */
+
+
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/list.c b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/list.c
new file mode 100644
index 0000000..5e207c1
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/list.c
@@ -0,0 +1,240 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+
+#include
+#include "FreeRTOS.h"
+#include "list.h"
+
+/*-----------------------------------------------------------
+ * PUBLIC LIST API documented in list.h
+ *----------------------------------------------------------*/
+
+void vListInitialise( List_t * const pxList )
+{
+ /* The list structure contains a list item which is used to mark the
+ end of the list. To initialise the list the list end is inserted
+ as the only list entry. */
+ pxList->pxIndex = ( ListItem_t * ) &( pxList->xListEnd ); /*lint !e826 !e740 The mini list structure is used as the list end to save RAM. This is checked and valid. */
+
+ /* The list end value is the highest possible value in the list to
+ ensure it remains at the end of the list. */
+ pxList->xListEnd.xItemValue = portMAX_DELAY;
+
+ /* The list end next and previous pointers point to itself so we know
+ when the list is empty. */
+ pxList->xListEnd.pxNext = ( ListItem_t * ) &( pxList->xListEnd ); /*lint !e826 !e740 The mini list structure is used as the list end to save RAM. This is checked and valid. */
+ pxList->xListEnd.pxPrevious = ( ListItem_t * ) &( pxList->xListEnd );/*lint !e826 !e740 The mini list structure is used as the list end to save RAM. This is checked and valid. */
+
+ pxList->uxNumberOfItems = ( UBaseType_t ) 0U;
+
+ /* Write known values into the list if
+ configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+ listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList );
+ listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList );
+}
+/*-----------------------------------------------------------*/
+
+void vListInitialiseItem( ListItem_t * const pxItem )
+{
+ /* Make sure the list item is not recorded as being on a list. */
+ pxItem->pvContainer = NULL;
+
+ /* Write known values into the list item if
+ configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+ listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
+ listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
+}
+/*-----------------------------------------------------------*/
+
+void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem )
+{
+ListItem_t * const pxIndex = pxList->pxIndex;
+
+ /* Only effective when configASSERT() is also defined, these tests may catch
+ the list data structures being overwritten in memory. They will not catch
+ data errors caused by incorrect configuration or use of FreeRTOS. */
+ listTEST_LIST_INTEGRITY( pxList );
+ listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
+
+ /* Insert a new list item into pxList, but rather than sort the list,
+ makes the new list item the last item to be removed by a call to
+ listGET_OWNER_OF_NEXT_ENTRY(). */
+ pxNewListItem->pxNext = pxIndex;
+ pxNewListItem->pxPrevious = pxIndex->pxPrevious;
+
+ /* Only used during decision coverage testing. */
+ mtCOVERAGE_TEST_DELAY();
+
+ pxIndex->pxPrevious->pxNext = pxNewListItem;
+ pxIndex->pxPrevious = pxNewListItem;
+
+ /* Remember which list the item is in. */
+ pxNewListItem->pvContainer = ( void * ) pxList;
+
+ ( pxList->uxNumberOfItems )++;
+}
+/*-----------------------------------------------------------*/
+
+void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem )
+{
+ListItem_t *pxIterator;
+const TickType_t xValueOfInsertion = pxNewListItem->xItemValue;
+
+ /* Only effective when configASSERT() is also defined, these tests may catch
+ the list data structures being overwritten in memory. They will not catch
+ data errors caused by incorrect configuration or use of FreeRTOS. */
+ listTEST_LIST_INTEGRITY( pxList );
+ listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
+
+ /* Insert the new list item into the list, sorted in xItemValue order.
+
+ If the list already contains a list item with the same item value then the
+ new list item should be placed after it. This ensures that TCB's which are
+ stored in ready lists (all of which have the same xItemValue value) get a
+ share of the CPU. However, if the xItemValue is the same as the back marker
+ the iteration loop below will not end. Therefore the value is checked
+ first, and the algorithm slightly modified if necessary. */
+ if( xValueOfInsertion == portMAX_DELAY )
+ {
+ pxIterator = pxList->xListEnd.pxPrevious;
+ }
+ else
+ {
+ /* *** NOTE ***********************************************************
+ If you find your application is crashing here then likely causes are
+ listed below. In addition see http://www.freertos.org/FAQHelp.html for
+ more tips, and ensure configASSERT() is defined!
+ http://www.freertos.org/a00110.html#configASSERT
+
+ 1) Stack overflow -
+ see http://www.freertos.org/Stacks-and-stack-overflow-checking.html
+ 2) Incorrect interrupt priority assignment, especially on Cortex-M
+ parts where numerically high priority values denote low actual
+ interrupt priorities, which can seem counter intuitive. See
+ http://www.freertos.org/RTOS-Cortex-M3-M4.html and the definition
+ of configMAX_SYSCALL_INTERRUPT_PRIORITY on
+ http://www.freertos.org/a00110.html
+ 3) Calling an API function from within a critical section or when
+ the scheduler is suspended, or calling an API function that does
+ not end in "FromISR" from an interrupt.
+ 4) Using a queue or semaphore before it has been initialised or
+ before the scheduler has been started (are interrupts firing
+ before vTaskStartScheduler() has been called?).
+ **********************************************************************/
+
+ for( pxIterator = ( ListItem_t * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext ) /*lint !e826 !e740 The mini list structure is used as the list end to save RAM. This is checked and valid. */
+ {
+ /* There is nothing to do here, just iterating to the wanted
+ insertion position. */
+ }
+ }
+
+ pxNewListItem->pxNext = pxIterator->pxNext;
+ pxNewListItem->pxNext->pxPrevious = pxNewListItem;
+ pxNewListItem->pxPrevious = pxIterator;
+ pxIterator->pxNext = pxNewListItem;
+
+ /* Remember which list the item is in. This allows fast removal of the
+ item later. */
+ pxNewListItem->pvContainer = ( void * ) pxList;
+
+ ( pxList->uxNumberOfItems )++;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove )
+{
+/* The list item knows which list it is in. Obtain the list from the list
+item. */
+List_t * const pxList = ( List_t * ) pxItemToRemove->pvContainer;
+
+ pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;
+ pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;
+
+ /* Only used during decision coverage testing. */
+ mtCOVERAGE_TEST_DELAY();
+
+ /* Make sure the index is left pointing to a valid item. */
+ if( pxList->pxIndex == pxItemToRemove )
+ {
+ pxList->pxIndex = pxItemToRemove->pxPrevious;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ pxItemToRemove->pvContainer = NULL;
+ ( pxList->uxNumberOfItems )--;
+
+ return pxList->uxNumberOfItems;
+}
+/*-----------------------------------------------------------*/
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c
new file mode 100644
index 0000000..51d5c57
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/port.c
@@ -0,0 +1,573 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the ARM CM0 port.
+ *----------------------------------------------------------*/
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+#ifndef configSYSTICK_CLOCK_HZ
+ #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ
+#endif
+
+/* Constants required to manipulate the NVIC. */
+#define portNVIC_SYSTICK_CTRL (* ( ( volatile uint32_t *) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD (* ( ( volatile uint32_t *) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE (* ( ( volatile uint32_t * ) 0xe000e018 ))
+#define portNVIC_INT_CTRL ( ( volatile uint32_t *) 0xe000ed04 )
+#define portNVIC_SYSPRI2 ( ( volatile uint32_t *) 0xe000ed20 )
+#define portNVIC_SYSTICK_CLK 0x00000004
+#define portNVIC_SYSTICK_INT 0x00000002
+#define portNVIC_SYSTICK_ENABLE 0x00000001
+#define portNVIC_SYSTICK_COUNT_FLAG ( 1UL << 16UL )
+#define portNVIC_PENDSVSET 0x10000000
+#define portMIN_INTERRUPT_PRIORITY ( 255UL )
+#define portNVIC_PENDSV_PRI ( portMIN_INTERRUPT_PRIORITY << 16UL )
+#define portNVIC_SYSTICK_PRI ( portMIN_INTERRUPT_PRIORITY << 24UL )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR ( 0x01000000 )
+
+/* The systick is a 24-bit counter. */
+#define portMAX_24_BIT_NUMBER ( 0xffffffUL )
+
+/* A fiddle factor to estimate the number of SysTick counts that would have
+occurred while the SysTick counter is stopped during tickless idle
+calculations. */
+#define portMISSED_COUNTS_FACTOR ( 45UL )
+
+/* Let the user override the pre-loading of the initial LR with the address of
+prvTaskExitError() in case it messes up unwinding of the stack in the
+debugger. */
+#ifdef configTASK_RETURN_ADDRESS
+ #define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS
+#else
+ #define portTASK_RETURN_ADDRESS prvTaskExitError
+#endif
+
+/* Each task maintains its own interrupt status in the critical nesting
+variable. */
+static UBaseType_t uxCriticalNesting = 0xaaaaaaaa;
+
+/*
+ * Setup the timer to generate the tick interrupts. The implementation in this
+ * file is weak to allow application writers to change the timer used to
+ * generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void );
+
+/*
+ * Exception handlers.
+ */
+void xPortPendSVHandler( void ) __attribute__ (( naked ));
+void xPortSysTickHandler( void );
+void vPortSVCHandler( void );
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+static void vPortStartFirstTask( void ) __attribute__ (( naked ));
+
+/*
+ * Used to catch tasks that attempt to return from their implementing function.
+ */
+static void prvTaskExitError( void );
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The number of SysTick increments that make up one tick period.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+ static unsigned long ulTimerCountsForOneTick = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * The maximum number of tick periods that can be suppressed is limited by the
+ * 24 bit resolution of the SysTick timer.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+ static unsigned long xMaximumPossibleSuppressedTicks = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Compensate for the CPU cycles that pass while the SysTick is stopped (low
+ * power functionality only.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+ static unsigned long ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+ /* Simulate the stack frame as it would be created by a context switch
+ interrupt. */
+ pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+ *pxTopOfStack = portINITIAL_XPSR; /* xPSR */
+ pxTopOfStack--;
+ *pxTopOfStack = ( StackType_t ) pxCode; /* PC */
+ pxTopOfStack--;
+ *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
+ pxTopOfStack -= 5; /* R12, R3, R2 and R1. */
+ *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
+ pxTopOfStack -= 8; /* R11..R4. */
+
+ return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+ /* A function that implements a task must not exit or attempt to return to
+ its caller as there is nothing to return to. If a task wants to exit it
+ should instead call vTaskDelete( NULL ).
+
+ Artificially force an assert() to be triggered if configASSERT() is
+ defined, then stop here so application writers can catch the error. */
+ configASSERT( uxCriticalNesting == ~0UL );
+ portDISABLE_INTERRUPTS();
+ for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+void vPortSVCHandler( void )
+{
+ /* This function is no longer used, but retained for backward
+ compatibility. */
+}
+/*-----------------------------------------------------------*/
+
+void vPortStartFirstTask( void )
+{
+ /* The MSP stack is not reset as, unlike on M3/4 parts, there is no vector
+ table offset register that can be used to locate the initial stack value.
+ Not all M0 parts have the application vector table at address 0. */
+ __asm volatile(
+ " ldr r2, pxCurrentTCBConst2 \n" /* Obtain location of pxCurrentTCB. */
+ " ldr r3, [r2] \n"
+ " ldr r0, [r3] \n" /* The first item in pxCurrentTCB is the task top of stack. */
+ " add r0, #32 \n" /* Discard everything up to r0. */
+ " msr psp, r0 \n" /* This is now the new top of stack to use in the task. */
+ " movs r0, #2 \n" /* Switch to the psp stack. */
+ " msr CONTROL, r0 \n"
+ " isb \n"
+ " pop {r0-r5} \n" /* Pop the registers that are saved automatically. */
+ " mov lr, r5 \n" /* lr is now in r5. */
+ " pop {r3} \n" /* Return address is now in r3. */
+ " pop {r2} \n" /* Pop and discard XPSR. */
+ " cpsie i \n" /* The first task has its context and interrupts can be enabled. */
+ " bx r3 \n" /* Finally, jump to the user defined task code. */
+ " \n"
+ " .align 4 \n"
+ "pxCurrentTCBConst2: .word pxCurrentTCB "
+ );
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+BaseType_t xPortStartScheduler( void )
+{
+ /* Make PendSV, CallSV and SysTick the same priroity as the kernel. */
+ *(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;
+ *(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;
+
+ /* Start the timer that generates the tick ISR. Interrupts are disabled
+ here already. */
+ vPortSetupTimerInterrupt();
+
+ /* Initialise the critical nesting count ready for the first task. */
+ uxCriticalNesting = 0;
+
+ /* Start the first task. */
+ vPortStartFirstTask();
+
+ /* Should never get here as the tasks will now be executing! Call the task
+ exit error function to prevent compiler warnings about a static function
+ not being called in the case that the application writer overrides this
+ functionality by defining configTASK_RETURN_ADDRESS. */
+ prvTaskExitError();
+
+ /* Should not get here! */
+ return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+ /* Not implemented in ports where there is nothing to return to.
+ Artificially force an assert. */
+ configASSERT( uxCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortYield( void )
+{
+ /* Set a PendSV to request a context switch. */
+ *( portNVIC_INT_CTRL ) = portNVIC_PENDSVSET;
+
+ /* Barriers are normally not required but do ensure the code is completely
+ within the specified behaviour for the architecture. */
+ __asm volatile( "dsb" );
+ __asm volatile( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+ portDISABLE_INTERRUPTS();
+ uxCriticalNesting++;
+ __asm volatile( "dsb" );
+ __asm volatile( "isb" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+ configASSERT( uxCriticalNesting );
+ uxCriticalNesting--;
+ if( uxCriticalNesting == 0 )
+ {
+ portENABLE_INTERRUPTS();
+ }
+}
+/*-----------------------------------------------------------*/
+
+uint32_t ulSetInterruptMaskFromISR( void )
+{
+ __asm volatile(
+ " mrs r0, PRIMASK \n"
+ " cpsid i \n"
+ " bx lr "
+ );
+
+ /* To avoid compiler warnings. This line will never be reached. */
+ return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vClearInterruptMaskFromISR( uint32_t ulMask )
+{
+ __asm volatile(
+ " msr PRIMASK, r0 \n"
+ " bx lr "
+ );
+
+ /* Just to avoid compiler warning. */
+ ( void ) ulMask;
+}
+/*-----------------------------------------------------------*/
+
+void xPortPendSVHandler( void )
+{
+ /* This is a naked function. */
+
+ __asm volatile
+ (
+ " mrs r0, psp \n"
+ " \n"
+ " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */
+ " ldr r2, [r3] \n"
+ " \n"
+ " sub r0, r0, #32 \n" /* Make space for the remaining low registers. */
+ " str r0, [r2] \n" /* Save the new top of stack. */
+ " stmia r0!, {r4-r7} \n" /* Store the low registers that are not saved automatically. */
+ " mov r4, r8 \n" /* Store the high registers. */
+ " mov r5, r9 \n"
+ " mov r6, r10 \n"
+ " mov r7, r11 \n"
+ " stmia r0!, {r4-r7} \n"
+ " \n"
+ " push {r3, r14} \n"
+ " cpsid i \n"
+ " bl vTaskSwitchContext \n"
+ " cpsie i \n"
+ " pop {r2, r3} \n" /* lr goes in r3. r2 now holds tcb pointer. */
+ " \n"
+ " ldr r1, [r2] \n"
+ " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */
+ " add r0, r0, #16 \n" /* Move to the high registers. */
+ " ldmia r0!, {r4-r7} \n" /* Pop the high registers. */
+ " mov r8, r4 \n"
+ " mov r9, r5 \n"
+ " mov r10, r6 \n"
+ " mov r11, r7 \n"
+ " \n"
+ " msr psp, r0 \n" /* Remember the new top of stack for the task. */
+ " \n"
+ " sub r0, r0, #32 \n" /* Go back for the low registers that are not automatically restored. */
+ " ldmia r0!, {r4-r7} \n" /* Pop low registers. */
+ " \n"
+ " bx r3 \n"
+ " \n"
+ " .align 4 \n"
+ "pxCurrentTCBConst: .word pxCurrentTCB "
+ );
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+uint32_t ulPreviousMask;
+
+ ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ /* Increment the RTOS tick. */
+ if( xTaskIncrementTick() != pdFALSE )
+ {
+ /* Pend a context switch. */
+ *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET;
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
+}
+/*-----------------------------------------------------------*/
+
+#if configUSE_TICKLESS_IDLE == 1
+
+ __attribute__((weak)) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+ {
+ uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements, ulSysTickCTRL;
+ TickType_t xModifiableIdleTime;
+
+ /* Make sure the SysTick reload value does not overflow the counter. */
+ if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+ {
+ xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+ }
+
+ /* Stop the SysTick momentarily. The time the SysTick is stopped for
+ is accounted for as best it can be, but using the tickless mode will
+ inevitably result in some tiny drift of the time maintained by the
+ kernel with respect to calendar time. */
+ portNVIC_SYSTICK_CTRL &= ~portNVIC_SYSTICK_ENABLE;
+
+ /* Calculate the reload value required to wait xExpectedIdleTime
+ tick periods. -1 is used because this code will execute part way
+ through one of the tick periods. */
+ ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+ if( ulReloadValue > ulStoppedTimerCompensation )
+ {
+ ulReloadValue -= ulStoppedTimerCompensation;
+ }
+
+ /* Enter a critical section but don't use the taskENTER_CRITICAL()
+ method as that will mask interrupts that should exit sleep mode. */
+ __asm volatile( "cpsid i" );
+
+ /* If a context switch is pending or a task is waiting for the scheduler
+ to be unsuspended then abandon the low power entry. */
+ if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+ {
+ /* Restart from whatever is left in the count register to complete
+ this tick period. */
+ portNVIC_SYSTICK_LOAD = portNVIC_SYSTICK_CURRENT_VALUE;
+
+ /* Restart SysTick. */
+ portNVIC_SYSTICK_CTRL |= portNVIC_SYSTICK_ENABLE;
+
+ /* Reset the reload register to the value required for normal tick
+ periods. */
+ portNVIC_SYSTICK_LOAD = ulTimerCountsForOneTick - 1UL;
+
+ /* Re-enable interrupts - see comments above the cpsid instruction()
+ above. */
+ __asm volatile( "cpsie i" );
+ }
+ else
+ {
+ /* Set the new reload value. */
+ portNVIC_SYSTICK_LOAD = ulReloadValue;
+
+ /* Clear the SysTick count flag and set the count value back to
+ zero. */
+ portNVIC_SYSTICK_CURRENT_VALUE = 0UL;
+
+ /* Restart SysTick. */
+ portNVIC_SYSTICK_CTRL |= portNVIC_SYSTICK_ENABLE;
+
+ /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can
+ set its parameter to 0 to indicate that its implementation contains
+ its own wait for interrupt or wait for event instruction, and so wfi
+ should not be executed again. However, the original expected idle
+ time variable must remain unmodified, so a copy is taken. */
+ xModifiableIdleTime = xExpectedIdleTime;
+ configPRE_SLEEP_PROCESSING( &xModifiableIdleTime );
+ if( xModifiableIdleTime > 0 )
+ {
+ __asm volatile( "dsb" );
+ __asm volatile( "wfi" );
+ __asm volatile( "isb" );
+ }
+ configPOST_SLEEP_PROCESSING( &xExpectedIdleTime );
+
+ /* Stop SysTick. Again, the time the SysTick is stopped for is
+ accounted for as best it can be, but using the tickless mode will
+ inevitably result in some tiny drift of the time maintained by the
+ kernel with respect to calendar time. */
+ ulSysTickCTRL = portNVIC_SYSTICK_CTRL;
+ portNVIC_SYSTICK_CTRL = ( ulSysTickCTRL & ~portNVIC_SYSTICK_ENABLE );
+
+ /* Re-enable interrupts - see comments above the cpsid instruction()
+ above. */
+ __asm volatile( "cpsie i" );
+
+ if( ( ulSysTickCTRL & portNVIC_SYSTICK_COUNT_FLAG ) != 0 )
+ {
+ uint32_t ulCalculatedLoadValue;
+
+ /* The tick interrupt has already executed, and the SysTick
+ count reloaded with ulReloadValue. Reset the
+ portNVIC_SYSTICK_LOAD with whatever remains of this tick
+ period. */
+ ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE );
+
+ /* Don't allow a tiny value, or values that have somehow
+ underflowed because the post sleep hook did something
+ that took too long. */
+ if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+ {
+ ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+ }
+
+ portNVIC_SYSTICK_LOAD = ulCalculatedLoadValue;
+
+ /* The tick interrupt handler will already have pended the tick
+ processing in the kernel. As the pending tick will be
+ processed as soon as this function exits, the tick value
+ maintained by the tick is stepped forward by one less than the
+ time spent waiting. */
+ ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+ }
+ else
+ {
+ /* Something other than the tick interrupt ended the sleep.
+ Work out how long the sleep lasted rounded to complete tick
+ periods (not the ulReload value which accounted for part
+ ticks). */
+ ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE;
+
+ /* How many complete tick periods passed while the processor
+ was waiting? */
+ ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+ /* The reload value is set to whatever fraction of a single tick
+ period remains. */
+ portNVIC_SYSTICK_LOAD = ( ( ulCompleteTickPeriods + 1 ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+ }
+
+ /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD
+ again, then set portNVIC_SYSTICK_LOAD back to its standard
+ value. The critical section is used to ensure the tick interrupt
+ can only execute once in the case that the reload register is near
+ zero. */
+ portNVIC_SYSTICK_CURRENT_VALUE = 0UL;
+ portENTER_CRITICAL();
+ {
+ portNVIC_SYSTICK_CTRL |= portNVIC_SYSTICK_ENABLE;
+ vTaskStepTick( ulCompleteTickPeriods );
+ portNVIC_SYSTICK_LOAD = ulTimerCountsForOneTick - 1UL;
+ }
+ portEXIT_CRITICAL();
+ }
+ }
+
+#endif /* #if configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the systick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+__attribute__(( weak )) void vPortSetupTimerInterrupt( void )
+{
+ /* Calculate the constants required to configure the tick interrupt. */
+ #if configUSE_TICKLESS_IDLE == 1
+ {
+ ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
+ xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+ ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
+ }
+ #endif /* configUSE_TICKLESS_IDLE */
+ /* Configure SysTick to interrupt at the requested rate. */
+
+ portNVIC_SYSTICK_LOAD = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+ portNVIC_SYSTICK_CTRL = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE;
+}
+/*-----------------------------------------------------------*/
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/portmacro.h b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/portmacro.h
new file mode 100644
index 0000000..ddc24ce
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM0/portmacro.h
@@ -0,0 +1,165 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR char
+#define portFLOAT float
+#define portDOUBLE double
+#define portLONG long
+#define portSHORT short
+#define portSTACK_TYPE uint32_t
+#define portBASE_TYPE long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configUSE_16_BIT_TICKS == 1 )
+ typedef uint16_t TickType_t;
+ #define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+ typedef uint32_t TickType_t;
+ #define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+ /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+ not need to be guarded with a critical section. */
+ #define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH ( -1 )
+#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT 8
+/*-----------------------------------------------------------*/
+
+
+/* Scheduler utilities. */
+extern void vPortYield( void );
+#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL )
+#define portYIELD() vPortYield()
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+/*-----------------------------------------------------------*/
+
+
+/* Critical section management. */
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+extern uint32_t ulSetInterruptMaskFromISR( void ) __attribute__((naked));
+extern void vClearInterruptMaskFromISR( uint32_t ulMask ) __attribute__((naked));
+
+#define portSET_INTERRUPT_MASK_FROM_ISR() ulSetInterruptMaskFromISR()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vClearInterruptMaskFromISR( x )
+#define portDISABLE_INTERRUPTS() __asm volatile ( " cpsid i " )
+#define portENABLE_INTERRUPTS() __asm volatile ( " cpsie i " )
+#define portENTER_CRITICAL() vPortEnterCritical()
+#define portEXIT_CRITICAL() vPortExitCritical()
+
+/*-----------------------------------------------------------*/
+
+/* Tickless idle/low power functionality. */
+#ifndef portSUPPRESS_TICKS_AND_SLEEP
+ extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
+ #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
+#endif
+
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+
+#define portNOP()
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c
new file mode 100644
index 0000000..e7c7ade
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c
@@ -0,0 +1,478 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+/*
+ * A sample implementation of pvPortMalloc() and vPortFree() that combines
+ * (coalescences) adjacent memory blocks as they are freed, and in so doing
+ * limits memory fragmentation.
+ *
+ * See heap_1.c, heap_2.c and heap_3.c for alternative implementations, and the
+ * memory management pages of http://www.FreeRTOS.org for more information.
+ */
+#include
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers. That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 0 )
+ #error This file must not be used if configSUPPORT_DYNAMIC_ALLOCATION is 0
+#endif
+
+/* Block sizes must not get too small. */
+#define heapMINIMUM_BLOCK_SIZE ( ( size_t ) ( xHeapStructSize << 1 ) )
+
+/* Assumes 8bit bytes! */
+#define heapBITS_PER_BYTE ( ( size_t ) 8 )
+
+/* Allocate the memory for the heap. */
+#if( configAPPLICATION_ALLOCATED_HEAP == 1 )
+ /* The application writer has already defined the array used for the RTOS
+ heap - probably so it can be placed in a special segment or address. */
+ extern uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#else
+ static uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#endif /* configAPPLICATION_ALLOCATED_HEAP */
+
+/* Define the linked list structure. This is used to link free blocks in order
+of their memory address. */
+typedef struct A_BLOCK_LINK
+{
+ struct A_BLOCK_LINK *pxNextFreeBlock; /*<< The next free block in the list. */
+ size_t xBlockSize; /*<< The size of the free block. */
+} BlockLink_t;
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Inserts a block of memory that is being freed into the correct position in
+ * the list of free memory blocks. The block being freed will be merged with
+ * the block in front it and/or the block behind it if the memory blocks are
+ * adjacent to each other.
+ */
+static void prvInsertBlockIntoFreeList( BlockLink_t *pxBlockToInsert );
+
+/*
+ * Called automatically to setup the required heap structures the first time
+ * pvPortMalloc() is called.
+ */
+static void prvHeapInit( void );
+
+/*-----------------------------------------------------------*/
+
+/* The size of the structure placed at the beginning of each allocated memory
+block must by correctly byte aligned. */
+static const size_t xHeapStructSize = ( sizeof( BlockLink_t ) + ( ( size_t ) ( portBYTE_ALIGNMENT - 1 ) ) ) & ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+
+/* Create a couple of list links to mark the start and end of the list. */
+static BlockLink_t xStart, *pxEnd = NULL;
+
+/* Keeps track of the number of free bytes remaining, but says nothing about
+fragmentation. */
+static size_t xFreeBytesRemaining = 0U;
+static size_t xMinimumEverFreeBytesRemaining = 0U;
+
+/* Gets set to the top bit of an size_t type. When this bit in the xBlockSize
+member of an BlockLink_t structure is set then the block belongs to the
+application. When the bit is free the block is still part of the free heap
+space. */
+static size_t xBlockAllocatedBit = 0;
+
+/*-----------------------------------------------------------*/
+
+void *pvPortMalloc( size_t xWantedSize )
+{
+BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
+void *pvReturn = NULL;
+
+ vTaskSuspendAll();
+ {
+ /* If this is the first call to malloc then the heap will require
+ initialisation to setup the list of free blocks. */
+ if( pxEnd == NULL )
+ {
+ prvHeapInit();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Check the requested block size is not so large that the top bit is
+ set. The top bit of the block size member of the BlockLink_t structure
+ is used to determine who owns the block - the application or the
+ kernel, so it must be free. */
+ if( ( xWantedSize & xBlockAllocatedBit ) == 0 )
+ {
+ /* The wanted size is increased so it can contain a BlockLink_t
+ structure in addition to the requested amount of bytes. */
+ if( xWantedSize > 0 )
+ {
+ xWantedSize += xHeapStructSize;
+
+ /* Ensure that blocks are always aligned to the required number
+ of bytes. */
+ if( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) != 0x00 )
+ {
+ /* Byte alignment required. */
+ xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
+ configASSERT( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) == 0 );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ if( ( xWantedSize > 0 ) && ( xWantedSize <= xFreeBytesRemaining ) )
+ {
+ /* Traverse the list from the start (lowest address) block until
+ one of adequate size is found. */
+ pxPreviousBlock = &xStart;
+ pxBlock = xStart.pxNextFreeBlock;
+ while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
+ {
+ pxPreviousBlock = pxBlock;
+ pxBlock = pxBlock->pxNextFreeBlock;
+ }
+
+ /* If the end marker was reached then a block of adequate size
+ was not found. */
+ if( pxBlock != pxEnd )
+ {
+ /* Return the memory space pointed to - jumping over the
+ BlockLink_t structure at its start. */
+ pvReturn = ( void * ) ( ( ( uint8_t * ) pxPreviousBlock->pxNextFreeBlock ) + xHeapStructSize );
+
+ /* This block is being returned for use so must be taken out
+ of the list of free blocks. */
+ pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
+
+ /* If the block is larger than required it can be split into
+ two. */
+ if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
+ {
+ /* This block is to be split into two. Create a new
+ block following the number of bytes requested. The void
+ cast is used to prevent byte alignment warnings from the
+ compiler. */
+ pxNewBlockLink = ( void * ) ( ( ( uint8_t * ) pxBlock ) + xWantedSize );
+ configASSERT( ( ( ( size_t ) pxNewBlockLink ) & portBYTE_ALIGNMENT_MASK ) == 0 );
+
+ /* Calculate the sizes of two blocks split from the
+ single block. */
+ pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
+ pxBlock->xBlockSize = xWantedSize;
+
+ /* Insert the new block into the list of free blocks. */
+ prvInsertBlockIntoFreeList( pxNewBlockLink );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ xFreeBytesRemaining -= pxBlock->xBlockSize;
+
+ if( xFreeBytesRemaining < xMinimumEverFreeBytesRemaining )
+ {
+ xMinimumEverFreeBytesRemaining = xFreeBytesRemaining;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* The block is being returned - it is allocated and owned
+ by the application and has no "next" block. */
+ pxBlock->xBlockSize |= xBlockAllocatedBit;
+ pxBlock->pxNextFreeBlock = NULL;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ traceMALLOC( pvReturn, xWantedSize );
+ }
+ ( void ) xTaskResumeAll();
+
+ #if( configUSE_MALLOC_FAILED_HOOK == 1 )
+ {
+ if( pvReturn == NULL )
+ {
+ extern void vApplicationMallocFailedHook( void );
+ vApplicationMallocFailedHook();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif
+
+ configASSERT( ( ( ( size_t ) pvReturn ) & ( size_t ) portBYTE_ALIGNMENT_MASK ) == 0 );
+ return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vPortFree( void *pv )
+{
+uint8_t *puc = ( uint8_t * ) pv;
+BlockLink_t *pxLink;
+
+ if( pv != NULL )
+ {
+ /* The memory being freed will have an BlockLink_t structure immediately
+ before it. */
+ puc -= xHeapStructSize;
+
+ /* This casting is to keep the compiler from issuing warnings. */
+ pxLink = ( void * ) puc;
+
+ /* Check the block is actually allocated. */
+ configASSERT( ( pxLink->xBlockSize & xBlockAllocatedBit ) != 0 );
+ configASSERT( pxLink->pxNextFreeBlock == NULL );
+
+ if( ( pxLink->xBlockSize & xBlockAllocatedBit ) != 0 )
+ {
+ if( pxLink->pxNextFreeBlock == NULL )
+ {
+ /* The block is being returned to the heap - it is no longer
+ allocated. */
+ pxLink->xBlockSize &= ~xBlockAllocatedBit;
+
+ vTaskSuspendAll();
+ {
+ /* Add this block to the list of free blocks. */
+ xFreeBytesRemaining += pxLink->xBlockSize;
+ traceFREE( pv, pxLink->xBlockSize );
+ prvInsertBlockIntoFreeList( ( ( BlockLink_t * ) pxLink ) );
+ }
+ ( void ) xTaskResumeAll();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetFreeHeapSize( void )
+{
+ return xFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetMinimumEverFreeHeapSize( void )
+{
+ return xMinimumEverFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+void vPortInitialiseBlocks( void )
+{
+ /* This just exists to keep the linker quiet. */
+}
+/*-----------------------------------------------------------*/
+
+static void prvHeapInit( void )
+{
+BlockLink_t *pxFirstFreeBlock;
+uint8_t *pucAlignedHeap;
+size_t uxAddress;
+size_t xTotalHeapSize = configTOTAL_HEAP_SIZE;
+
+ /* Ensure the heap starts on a correctly aligned boundary. */
+ uxAddress = ( size_t ) ucHeap;
+
+ if( ( uxAddress & portBYTE_ALIGNMENT_MASK ) != 0 )
+ {
+ uxAddress += ( portBYTE_ALIGNMENT - 1 );
+ uxAddress &= ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+ xTotalHeapSize -= uxAddress - ( size_t ) ucHeap;
+ }
+
+ pucAlignedHeap = ( uint8_t * ) uxAddress;
+
+ /* xStart is used to hold a pointer to the first item in the list of free
+ blocks. The void cast is used to prevent compiler warnings. */
+ xStart.pxNextFreeBlock = ( void * ) pucAlignedHeap;
+ xStart.xBlockSize = ( size_t ) 0;
+
+ /* pxEnd is used to mark the end of the list of free blocks and is inserted
+ at the end of the heap space. */
+ uxAddress = ( ( size_t ) pucAlignedHeap ) + xTotalHeapSize;
+ uxAddress -= xHeapStructSize;
+ uxAddress &= ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+ pxEnd = ( void * ) uxAddress;
+ pxEnd->xBlockSize = 0;
+ pxEnd->pxNextFreeBlock = NULL;
+
+ /* To start with there is a single free block that is sized to take up the
+ entire heap space, minus the space taken by pxEnd. */
+ pxFirstFreeBlock = ( void * ) pucAlignedHeap;
+ pxFirstFreeBlock->xBlockSize = uxAddress - ( size_t ) pxFirstFreeBlock;
+ pxFirstFreeBlock->pxNextFreeBlock = pxEnd;
+
+ /* Only one block exists - and it covers the entire usable heap space. */
+ xMinimumEverFreeBytesRemaining = pxFirstFreeBlock->xBlockSize;
+ xFreeBytesRemaining = pxFirstFreeBlock->xBlockSize;
+
+ /* Work out the position of the top bit in a size_t variable. */
+ xBlockAllocatedBit = ( ( size_t ) 1 ) << ( ( sizeof( size_t ) * heapBITS_PER_BYTE ) - 1 );
+}
+/*-----------------------------------------------------------*/
+
+static void prvInsertBlockIntoFreeList( BlockLink_t *pxBlockToInsert )
+{
+BlockLink_t *pxIterator;
+uint8_t *puc;
+
+ /* Iterate through the list until a block is found that has a higher address
+ than the block being inserted. */
+ for( pxIterator = &xStart; pxIterator->pxNextFreeBlock < pxBlockToInsert; pxIterator = pxIterator->pxNextFreeBlock )
+ {
+ /* Nothing to do here, just iterate to the right position. */
+ }
+
+ /* Do the block being inserted, and the block it is being inserted after
+ make a contiguous block of memory? */
+ puc = ( uint8_t * ) pxIterator;
+ if( ( puc + pxIterator->xBlockSize ) == ( uint8_t * ) pxBlockToInsert )
+ {
+ pxIterator->xBlockSize += pxBlockToInsert->xBlockSize;
+ pxBlockToInsert = pxIterator;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Do the block being inserted, and the block it is being inserted before
+ make a contiguous block of memory? */
+ puc = ( uint8_t * ) pxBlockToInsert;
+ if( ( puc + pxBlockToInsert->xBlockSize ) == ( uint8_t * ) pxIterator->pxNextFreeBlock )
+ {
+ if( pxIterator->pxNextFreeBlock != pxEnd )
+ {
+ /* Form one big block from the two blocks. */
+ pxBlockToInsert->xBlockSize += pxIterator->pxNextFreeBlock->xBlockSize;
+ pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock->pxNextFreeBlock;
+ }
+ else
+ {
+ pxBlockToInsert->pxNextFreeBlock = pxEnd;
+ }
+ }
+ else
+ {
+ pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock;
+ }
+
+ /* If the block being inserted plugged a gab, so was merged with the block
+ before and the block after, then it's pxNextFreeBlock pointer will have
+ already been set, and should not be set here as that would make it point
+ to itself. */
+ if( pxIterator != pxBlockToInsert )
+ {
+ pxIterator->pxNextFreeBlock = pxBlockToInsert;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+}
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/queue.c b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/queue.c
new file mode 100644
index 0000000..ce623be
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/queue.c
@@ -0,0 +1,2566 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+#include
+#include
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers. That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+
+#if ( configUSE_CO_ROUTINES == 1 )
+ #include "croutine.h"
+#endif
+
+/* Lint e961 and e750 are suppressed as a MISRA exception justified because the
+MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined for the
+header files above, but not in this file, in order to generate the correct
+privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750. */
+
+
+/* Constants used with the cRxLock and cTxLock structure members. */
+#define queueUNLOCKED ( ( int8_t ) -1 )
+#define queueLOCKED_UNMODIFIED ( ( int8_t ) 0 )
+
+/* When the Queue_t structure is used to represent a base queue its pcHead and
+pcTail members are used as pointers into the queue storage area. When the
+Queue_t structure is used to represent a mutex pcHead and pcTail pointers are
+not necessary, and the pcHead pointer is set to NULL to indicate that the
+pcTail pointer actually points to the mutex holder (if any). Map alternative
+names to the pcHead and pcTail structure members to ensure the readability of
+the code is maintained despite this dual use of two structure members. An
+alternative implementation would be to use a union, but use of a union is
+against the coding standard (although an exception to the standard has been
+permitted where the dual use also significantly changes the type of the
+structure member). */
+#define pxMutexHolder pcTail
+#define uxQueueType pcHead
+#define queueQUEUE_IS_MUTEX NULL
+
+/* Semaphores do not actually store or copy data, so have an item size of
+zero. */
+#define queueSEMAPHORE_QUEUE_ITEM_LENGTH ( ( UBaseType_t ) 0 )
+#define queueMUTEX_GIVE_BLOCK_TIME ( ( TickType_t ) 0U )
+
+#if( configUSE_PREEMPTION == 0 )
+ /* If the cooperative scheduler is being used then a yield should not be
+ performed just because a higher priority task has been woken. */
+ #define queueYIELD_IF_USING_PREEMPTION()
+#else
+ #define queueYIELD_IF_USING_PREEMPTION() portYIELD_WITHIN_API()
+#endif
+
+/*
+ * Definition of the queue used by the scheduler.
+ * Items are queued by copy, not reference. See the following link for the
+ * rationale: http://www.freertos.org/Embedded-RTOS-Queues.html
+ */
+typedef struct QueueDefinition
+{
+ int8_t *pcHead; /*< Points to the beginning of the queue storage area. */
+ int8_t *pcTail; /*< Points to the byte at the end of the queue storage area. Once more byte is allocated than necessary to store the queue items, this is used as a marker. */
+ int8_t *pcWriteTo; /*< Points to the free next place in the storage area. */
+
+ union /* Use of a union is an exception to the coding standard to ensure two mutually exclusive structure members don't appear simultaneously (wasting RAM). */
+ {
+ int8_t *pcReadFrom; /*< Points to the last place that a queued item was read from when the structure is used as a queue. */
+ UBaseType_t uxRecursiveCallCount;/*< Maintains a count of the number of times a recursive mutex has been recursively 'taken' when the structure is used as a mutex. */
+ } u;
+
+ List_t xTasksWaitingToSend; /*< List of tasks that are blocked waiting to post onto this queue. Stored in priority order. */
+ List_t xTasksWaitingToReceive; /*< List of tasks that are blocked waiting to read from this queue. Stored in priority order. */
+
+ volatile UBaseType_t uxMessagesWaiting;/*< The number of items currently in the queue. */
+ UBaseType_t uxLength; /*< The length of the queue defined as the number of items it will hold, not the number of bytes. */
+ UBaseType_t uxItemSize; /*< The size of each items that the queue will hold. */
+
+ volatile int8_t cRxLock; /*< Stores the number of items received from the queue (removed from the queue) while the queue was locked. Set to queueUNLOCKED when the queue is not locked. */
+ volatile int8_t cTxLock; /*< Stores the number of items transmitted to the queue (added to the queue) while the queue was locked. Set to queueUNLOCKED when the queue is not locked. */
+
+ #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+ uint8_t ucStaticallyAllocated; /*< Set to pdTRUE if the memory used by the queue was statically allocated to ensure no attempt is made to free the memory. */
+ #endif
+
+ #if ( configUSE_QUEUE_SETS == 1 )
+ struct QueueDefinition *pxQueueSetContainer;
+ #endif
+
+ #if ( configUSE_TRACE_FACILITY == 1 )
+ UBaseType_t uxQueueNumber;
+ uint8_t ucQueueType;
+ #endif
+
+} xQUEUE;
+
+/* The old xQUEUE name is maintained above then typedefed to the new Queue_t
+name below to enable the use of older kernel aware debuggers. */
+typedef xQUEUE Queue_t;
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The queue registry is just a means for kernel aware debuggers to locate
+ * queue structures. It has no other purpose so is an optional component.
+ */
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+ /* The type stored within the queue registry array. This allows a name
+ to be assigned to each queue making kernel aware debugging a little
+ more user friendly. */
+ typedef struct QUEUE_REGISTRY_ITEM
+ {
+ const char *pcQueueName; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ QueueHandle_t xHandle;
+ } xQueueRegistryItem;
+
+ /* The old xQueueRegistryItem name is maintained above then typedefed to the
+ new xQueueRegistryItem name below to enable the use of older kernel aware
+ debuggers. */
+ typedef xQueueRegistryItem QueueRegistryItem_t;
+
+ /* The queue registry is simply an array of QueueRegistryItem_t structures.
+ The pcQueueName member of a structure being NULL is indicative of the
+ array position being vacant. */
+ PRIVILEGED_DATA QueueRegistryItem_t xQueueRegistry[ configQUEUE_REGISTRY_SIZE ];
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+
+/*
+ * Unlocks a queue locked by a call to prvLockQueue. Locking a queue does not
+ * prevent an ISR from adding or removing items to the queue, but does prevent
+ * an ISR from removing tasks from the queue event lists. If an ISR finds a
+ * queue is locked it will instead increment the appropriate queue lock count
+ * to indicate that a task may require unblocking. When the queue in unlocked
+ * these lock counts are inspected, and the appropriate action taken.
+ */
+static void prvUnlockQueue( Queue_t * const pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Uses a critical section to determine if there is any data in a queue.
+ *
+ * @return pdTRUE if the queue contains no items, otherwise pdFALSE.
+ */
+static BaseType_t prvIsQueueEmpty( const Queue_t *pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Uses a critical section to determine if there is any space in a queue.
+ *
+ * @return pdTRUE if there is no space, otherwise pdFALSE;
+ */
+static BaseType_t prvIsQueueFull( const Queue_t *pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Copies an item into the queue, either at the front of the queue or the
+ * back of the queue.
+ */
+static BaseType_t prvCopyDataToQueue( Queue_t * const pxQueue, const void *pvItemToQueue, const BaseType_t xPosition ) PRIVILEGED_FUNCTION;
+
+/*
+ * Copies an item out of a queue.
+ */
+static void prvCopyDataFromQueue( Queue_t * const pxQueue, void * const pvBuffer ) PRIVILEGED_FUNCTION;
+
+#if ( configUSE_QUEUE_SETS == 1 )
+ /*
+ * Checks to see if a queue is a member of a queue set, and if so, notifies
+ * the queue set that the queue contains data.
+ */
+ static BaseType_t prvNotifyQueueSetContainer( const Queue_t * const pxQueue, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * Called after a Queue_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewQueue( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, const uint8_t ucQueueType, Queue_t *pxNewQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Mutexes are a special type of queue. When a mutex is created, first the
+ * queue is created, then prvInitialiseMutex() is called to configure the queue
+ * as a mutex.
+ */
+#if( configUSE_MUTEXES == 1 )
+ static void prvInitialiseMutex( Queue_t *pxNewQueue ) PRIVILEGED_FUNCTION;
+#endif
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Macro to mark a queue as locked. Locking a queue prevents an ISR from
+ * accessing the queue event lists.
+ */
+#define prvLockQueue( pxQueue ) \
+ taskENTER_CRITICAL(); \
+ { \
+ if( ( pxQueue )->cRxLock == queueUNLOCKED ) \
+ { \
+ ( pxQueue )->cRxLock = queueLOCKED_UNMODIFIED; \
+ } \
+ if( ( pxQueue )->cTxLock == queueUNLOCKED ) \
+ { \
+ ( pxQueue )->cTxLock = queueLOCKED_UNMODIFIED; \
+ } \
+ } \
+ taskEXIT_CRITICAL()
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue )
+{
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ configASSERT( pxQueue );
+
+ taskENTER_CRITICAL();
+ {
+ pxQueue->pcTail = pxQueue->pcHead + ( pxQueue->uxLength * pxQueue->uxItemSize );
+ pxQueue->uxMessagesWaiting = ( UBaseType_t ) 0U;
+ pxQueue->pcWriteTo = pxQueue->pcHead;
+ pxQueue->u.pcReadFrom = pxQueue->pcHead + ( ( pxQueue->uxLength - ( UBaseType_t ) 1U ) * pxQueue->uxItemSize );
+ pxQueue->cRxLock = queueUNLOCKED;
+ pxQueue->cTxLock = queueUNLOCKED;
+
+ if( xNewQueue == pdFALSE )
+ {
+ /* If there are tasks blocked waiting to read from the queue, then
+ the tasks will remain blocked as after this function exits the queue
+ will still be empty. If there are tasks blocked waiting to write to
+ the queue, then one should be unblocked as after this function exits
+ it will be possible to write to it. */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ queueYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ /* Ensure the event queues start in the correct state. */
+ vListInitialise( &( pxQueue->xTasksWaitingToSend ) );
+ vListInitialise( &( pxQueue->xTasksWaitingToReceive ) );
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ /* A value is returned for calling semantic consistency with previous
+ versions. */
+ return pdPASS;
+}
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+ QueueHandle_t xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType )
+ {
+ Queue_t *pxNewQueue;
+
+ configASSERT( uxQueueLength > ( UBaseType_t ) 0 );
+
+ /* The StaticQueue_t structure and the queue storage area must be
+ supplied. */
+ configASSERT( pxStaticQueue != NULL );
+
+ /* A queue storage area should be provided if the item size is not 0, and
+ should not be provided if the item size is 0. */
+ configASSERT( !( ( pucQueueStorage != NULL ) && ( uxItemSize == 0 ) ) );
+ configASSERT( !( ( pucQueueStorage == NULL ) && ( uxItemSize != 0 ) ) );
+
+ #if( configASSERT_DEFINED == 1 )
+ {
+ /* Sanity check that the size of the structure used to declare a
+ variable of type StaticQueue_t or StaticSemaphore_t equals the size of
+ the real queue and semaphore structures. */
+ volatile size_t xSize = sizeof( StaticQueue_t );
+ configASSERT( xSize == sizeof( Queue_t ) );
+ }
+ #endif /* configASSERT_DEFINED */
+
+ /* The address of a statically allocated queue was passed in, use it.
+ The address of a statically allocated storage area was also passed in
+ but is already set. */
+ pxNewQueue = ( Queue_t * ) pxStaticQueue; /*lint !e740 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */
+
+ if( pxNewQueue != NULL )
+ {
+ #if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ {
+ /* Queues can be allocated wither statically or dynamically, so
+ note this queue was allocated statically in case the queue is
+ later deleted. */
+ pxNewQueue->ucStaticallyAllocated = pdTRUE;
+ }
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+
+ prvInitialiseNewQueue( uxQueueLength, uxItemSize, pucQueueStorage, ucQueueType, pxNewQueue );
+ }
+
+ return pxNewQueue;
+ }
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+ QueueHandle_t xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType )
+ {
+ Queue_t *pxNewQueue;
+ size_t xQueueSizeInBytes;
+ uint8_t *pucQueueStorage;
+
+ configASSERT( uxQueueLength > ( UBaseType_t ) 0 );
+
+ if( uxItemSize == ( UBaseType_t ) 0 )
+ {
+ /* There is not going to be a queue storage area. */
+ xQueueSizeInBytes = ( size_t ) 0;
+ }
+ else
+ {
+ /* Allocate enough space to hold the maximum number of items that
+ can be in the queue at any time. */
+ xQueueSizeInBytes = ( size_t ) ( uxQueueLength * uxItemSize ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+ }
+
+ pxNewQueue = ( Queue_t * ) pvPortMalloc( sizeof( Queue_t ) + xQueueSizeInBytes );
+
+ if( pxNewQueue != NULL )
+ {
+ /* Jump past the queue structure to find the location of the queue
+ storage area. */
+ pucQueueStorage = ( ( uint8_t * ) pxNewQueue ) + sizeof( Queue_t );
+
+ #if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ {
+ /* Queues can be created either statically or dynamically, so
+ note this task was created dynamically in case it is later
+ deleted. */
+ pxNewQueue->ucStaticallyAllocated = pdFALSE;
+ }
+ #endif /* configSUPPORT_STATIC_ALLOCATION */
+
+ prvInitialiseNewQueue( uxQueueLength, uxItemSize, pucQueueStorage, ucQueueType, pxNewQueue );
+ }
+
+ return pxNewQueue;
+ }
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewQueue( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, const uint8_t ucQueueType, Queue_t *pxNewQueue )
+{
+ /* Remove compiler warnings about unused parameters should
+ configUSE_TRACE_FACILITY not be set to 1. */
+ ( void ) ucQueueType;
+
+ if( uxItemSize == ( UBaseType_t ) 0 )
+ {
+ /* No RAM was allocated for the queue storage area, but PC head cannot
+ be set to NULL because NULL is used as a key to say the queue is used as
+ a mutex. Therefore just set pcHead to point to the queue as a benign
+ value that is known to be within the memory map. */
+ pxNewQueue->pcHead = ( int8_t * ) pxNewQueue;
+ }
+ else
+ {
+ /* Set the head to the start of the queue storage area. */
+ pxNewQueue->pcHead = ( int8_t * ) pucQueueStorage;
+ }
+
+ /* Initialise the queue members as described where the queue type is
+ defined. */
+ pxNewQueue->uxLength = uxQueueLength;
+ pxNewQueue->uxItemSize = uxItemSize;
+ ( void ) xQueueGenericReset( pxNewQueue, pdTRUE );
+
+ #if ( configUSE_TRACE_FACILITY == 1 )
+ {
+ pxNewQueue->ucQueueType = ucQueueType;
+ }
+ #endif /* configUSE_TRACE_FACILITY */
+
+ #if( configUSE_QUEUE_SETS == 1 )
+ {
+ pxNewQueue->pxQueueSetContainer = NULL;
+ }
+ #endif /* configUSE_QUEUE_SETS */
+
+ traceQUEUE_CREATE( pxNewQueue );
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_MUTEXES == 1 )
+
+ static void prvInitialiseMutex( Queue_t *pxNewQueue )
+ {
+ if( pxNewQueue != NULL )
+ {
+ /* The queue create function will set all the queue structure members
+ correctly for a generic queue, but this function is creating a
+ mutex. Overwrite those members that need to be set differently -
+ in particular the information required for priority inheritance. */
+ pxNewQueue->pxMutexHolder = NULL;
+ pxNewQueue->uxQueueType = queueQUEUE_IS_MUTEX;
+
+ /* In case this is a recursive mutex. */
+ pxNewQueue->u.uxRecursiveCallCount = 0;
+
+ traceCREATE_MUTEX( pxNewQueue );
+
+ /* Start with the semaphore in the expected state. */
+ ( void ) xQueueGenericSend( pxNewQueue, NULL, ( TickType_t ) 0U, queueSEND_TO_BACK );
+ }
+ else
+ {
+ traceCREATE_MUTEX_FAILED();
+ }
+ }
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_MUTEXES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+ QueueHandle_t xQueueCreateMutex( const uint8_t ucQueueType )
+ {
+ Queue_t *pxNewQueue;
+ const UBaseType_t uxMutexLength = ( UBaseType_t ) 1, uxMutexSize = ( UBaseType_t ) 0;
+
+ pxNewQueue = ( Queue_t * ) xQueueGenericCreate( uxMutexLength, uxMutexSize, ucQueueType );
+ prvInitialiseMutex( pxNewQueue );
+
+ return pxNewQueue;
+ }
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_MUTEXES == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+
+ QueueHandle_t xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue )
+ {
+ Queue_t *pxNewQueue;
+ const UBaseType_t uxMutexLength = ( UBaseType_t ) 1, uxMutexSize = ( UBaseType_t ) 0;
+
+ /* Prevent compiler warnings about unused parameters if
+ configUSE_TRACE_FACILITY does not equal 1. */
+ ( void ) ucQueueType;
+
+ pxNewQueue = ( Queue_t * ) xQueueGenericCreateStatic( uxMutexLength, uxMutexSize, NULL, pxStaticQueue, ucQueueType );
+ prvInitialiseMutex( pxNewQueue );
+
+ return pxNewQueue;
+ }
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_MUTEXES == 1 ) && ( INCLUDE_xSemaphoreGetMutexHolder == 1 ) )
+
+ void* xQueueGetMutexHolder( QueueHandle_t xSemaphore )
+ {
+ void *pxReturn;
+
+ /* This function is called by xSemaphoreGetMutexHolder(), and should not
+ be called directly. Note: This is a good way of determining if the
+ calling task is the mutex holder, but not a good way of determining the
+ identity of the mutex holder, as the holder may change between the
+ following critical section exiting and the function returning. */
+ taskENTER_CRITICAL();
+ {
+ if( ( ( Queue_t * ) xSemaphore )->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ pxReturn = ( void * ) ( ( Queue_t * ) xSemaphore )->pxMutexHolder;
+ }
+ else
+ {
+ pxReturn = NULL;
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ return pxReturn;
+ } /*lint !e818 xSemaphore cannot be a pointer to const because it is a typedef. */
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_RECURSIVE_MUTEXES == 1 )
+
+ BaseType_t xQueueGiveMutexRecursive( QueueHandle_t xMutex )
+ {
+ BaseType_t xReturn;
+ Queue_t * const pxMutex = ( Queue_t * ) xMutex;
+
+ configASSERT( pxMutex );
+
+ /* If this is the task that holds the mutex then pxMutexHolder will not
+ change outside of this task. If this task does not hold the mutex then
+ pxMutexHolder can never coincidentally equal the tasks handle, and as
+ this is the only condition we are interested in it does not matter if
+ pxMutexHolder is accessed simultaneously by another task. Therefore no
+ mutual exclusion is required to test the pxMutexHolder variable. */
+ if( pxMutex->pxMutexHolder == ( void * ) xTaskGetCurrentTaskHandle() ) /*lint !e961 Not a redundant cast as TaskHandle_t is a typedef. */
+ {
+ traceGIVE_MUTEX_RECURSIVE( pxMutex );
+
+ /* uxRecursiveCallCount cannot be zero if pxMutexHolder is equal to
+ the task handle, therefore no underflow check is required. Also,
+ uxRecursiveCallCount is only modified by the mutex holder, and as
+ there can only be one, no mutual exclusion is required to modify the
+ uxRecursiveCallCount member. */
+ ( pxMutex->u.uxRecursiveCallCount )--;
+
+ /* Has the recursive call count unwound to 0? */
+ if( pxMutex->u.uxRecursiveCallCount == ( UBaseType_t ) 0 )
+ {
+ /* Return the mutex. This will automatically unblock any other
+ task that might be waiting to access the mutex. */
+ ( void ) xQueueGenericSend( pxMutex, NULL, queueMUTEX_GIVE_BLOCK_TIME, queueSEND_TO_BACK );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ /* The mutex cannot be given because the calling task is not the
+ holder. */
+ xReturn = pdFAIL;
+
+ traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex );
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_RECURSIVE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_RECURSIVE_MUTEXES == 1 )
+
+ BaseType_t xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait )
+ {
+ BaseType_t xReturn;
+ Queue_t * const pxMutex = ( Queue_t * ) xMutex;
+
+ configASSERT( pxMutex );
+
+ /* Comments regarding mutual exclusion as per those within
+ xQueueGiveMutexRecursive(). */
+
+ traceTAKE_MUTEX_RECURSIVE( pxMutex );
+
+ if( pxMutex->pxMutexHolder == ( void * ) xTaskGetCurrentTaskHandle() ) /*lint !e961 Cast is not redundant as TaskHandle_t is a typedef. */
+ {
+ ( pxMutex->u.uxRecursiveCallCount )++;
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = xQueueGenericReceive( pxMutex, NULL, xTicksToWait, pdFALSE );
+
+ /* pdPASS will only be returned if the mutex was successfully
+ obtained. The calling task may have entered the Blocked state
+ before reaching here. */
+ if( xReturn != pdFAIL )
+ {
+ ( pxMutex->u.uxRecursiveCallCount )++;
+ }
+ else
+ {
+ traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex );
+ }
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_RECURSIVE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+
+ QueueHandle_t xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue )
+ {
+ QueueHandle_t xHandle;
+
+ configASSERT( uxMaxCount != 0 );
+ configASSERT( uxInitialCount <= uxMaxCount );
+
+ xHandle = xQueueGenericCreateStatic( uxMaxCount, queueSEMAPHORE_QUEUE_ITEM_LENGTH, NULL, pxStaticQueue, queueQUEUE_TYPE_COUNTING_SEMAPHORE );
+
+ if( xHandle != NULL )
+ {
+ ( ( Queue_t * ) xHandle )->uxMessagesWaiting = uxInitialCount;
+
+ traceCREATE_COUNTING_SEMAPHORE();
+ }
+ else
+ {
+ traceCREATE_COUNTING_SEMAPHORE_FAILED();
+ }
+
+ return xHandle;
+ }
+
+#endif /* ( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+ QueueHandle_t xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount )
+ {
+ QueueHandle_t xHandle;
+
+ configASSERT( uxMaxCount != 0 );
+ configASSERT( uxInitialCount <= uxMaxCount );
+
+ xHandle = xQueueGenericCreate( uxMaxCount, queueSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_COUNTING_SEMAPHORE );
+
+ if( xHandle != NULL )
+ {
+ ( ( Queue_t * ) xHandle )->uxMessagesWaiting = uxInitialCount;
+
+ traceCREATE_COUNTING_SEMAPHORE();
+ }
+ else
+ {
+ traceCREATE_COUNTING_SEMAPHORE_FAILED();
+ }
+
+ return xHandle;
+ }
+
+#endif /* ( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition )
+{
+BaseType_t xEntryTimeSet = pdFALSE, xYieldRequired;
+TimeOut_t xTimeOut;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ configASSERT( pxQueue );
+ configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+ configASSERT( !( ( xCopyPosition == queueOVERWRITE ) && ( pxQueue->uxLength != 1 ) ) );
+ #if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+ {
+ configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
+ }
+ #endif
+
+
+ /* This function relaxes the coding standard somewhat to allow return
+ statements within the function itself. This is done in the interest
+ of execution time efficiency. */
+ for( ;; )
+ {
+ taskENTER_CRITICAL();
+ {
+ /* Is there room on the queue now? The running task must be the
+ highest priority task wanting to access the queue. If the head item
+ in the queue is to be overwritten then it does not matter if the
+ queue is full. */
+ if( ( pxQueue->uxMessagesWaiting < pxQueue->uxLength ) || ( xCopyPosition == queueOVERWRITE ) )
+ {
+ traceQUEUE_SEND( pxQueue );
+ xYieldRequired = prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+ #if ( configUSE_QUEUE_SETS == 1 )
+ {
+ if( pxQueue->pxQueueSetContainer != NULL )
+ {
+ if( prvNotifyQueueSetContainer( pxQueue, xCopyPosition ) != pdFALSE )
+ {
+ /* The queue is a member of a queue set, and posting
+ to the queue set caused a higher priority task to
+ unblock. A context switch is required. */
+ queueYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ /* If there was a task waiting for data to arrive on the
+ queue then unblock it now. */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The unblocked task has a priority higher than
+ our own so yield immediately. Yes it is ok to
+ do this from within the critical section - the
+ kernel takes care of that. */
+ queueYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else if( xYieldRequired != pdFALSE )
+ {
+ /* This path is a special case that will only get
+ executed if the task was holding multiple mutexes
+ and the mutexes were given back in an order that is
+ different to that in which they were taken. */
+ queueYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ #else /* configUSE_QUEUE_SETS */
+ {
+ /* If there was a task waiting for data to arrive on the
+ queue then unblock it now. */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The unblocked task has a priority higher than
+ our own so yield immediately. Yes it is ok to do
+ this from within the critical section - the kernel
+ takes care of that. */
+ queueYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else if( xYieldRequired != pdFALSE )
+ {
+ /* This path is a special case that will only get
+ executed if the task was holding multiple mutexes and
+ the mutexes were given back in an order that is
+ different to that in which they were taken. */
+ queueYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_QUEUE_SETS */
+
+ taskEXIT_CRITICAL();
+ return pdPASS;
+ }
+ else
+ {
+ if( xTicksToWait == ( TickType_t ) 0 )
+ {
+ /* The queue was full and no block time is specified (or
+ the block time has expired) so leave now. */
+ taskEXIT_CRITICAL();
+
+ /* Return to the original privilege level before exiting
+ the function. */
+ traceQUEUE_SEND_FAILED( pxQueue );
+ return errQUEUE_FULL;
+ }
+ else if( xEntryTimeSet == pdFALSE )
+ {
+ /* The queue was full and a block time was specified so
+ configure the timeout structure. */
+ vTaskSetTimeOutState( &xTimeOut );
+ xEntryTimeSet = pdTRUE;
+ }
+ else
+ {
+ /* Entry time was already set. */
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ /* Interrupts and other tasks can send to and receive from the queue
+ now the critical section has been exited. */
+
+ vTaskSuspendAll();
+ prvLockQueue( pxQueue );
+
+ /* Update the timeout state to see if it has expired yet. */
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+ {
+ if( prvIsQueueFull( pxQueue ) != pdFALSE )
+ {
+ traceBLOCKING_ON_QUEUE_SEND( pxQueue );
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );
+
+ /* Unlocking the queue means queue events can effect the
+ event list. It is possible that interrupts occurring now
+ remove this task from the event list again - but as the
+ scheduler is suspended the task will go onto the pending
+ ready last instead of the actual ready list. */
+ prvUnlockQueue( pxQueue );
+
+ /* Resuming the scheduler will move tasks from the pending
+ ready list into the ready list - so it is feasible that this
+ task is already in a ready list before it yields - in which
+ case the yield will not cause a context switch unless there
+ is also a higher priority task in the pending ready list. */
+ if( xTaskResumeAll() == pdFALSE )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+ else
+ {
+ /* Try again. */
+ prvUnlockQueue( pxQueue );
+ ( void ) xTaskResumeAll();
+ }
+ }
+ else
+ {
+ /* The timeout has expired. */
+ prvUnlockQueue( pxQueue );
+ ( void ) xTaskResumeAll();
+
+ traceQUEUE_SEND_FAILED( pxQueue );
+ return errQUEUE_FULL;
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericSendFromISR( QueueHandle_t xQueue, const void * const pvItemToQueue, BaseType_t * const pxHigherPriorityTaskWoken, const BaseType_t xCopyPosition )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ configASSERT( pxQueue );
+ configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+ configASSERT( !( ( xCopyPosition == queueOVERWRITE ) && ( pxQueue->uxLength != 1 ) ) );
+
+ /* RTOS ports that support interrupt nesting have the concept of a maximum
+ system call (or maximum API call) interrupt priority. Interrupts that are
+ above the maximum system call priority are kept permanently enabled, even
+ when the RTOS kernel is in a critical section, but cannot make any calls to
+ FreeRTOS API functions. If configASSERT() is defined in FreeRTOSConfig.h
+ then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has been
+ assigned a priority above the configured maximum system call priority.
+ Only FreeRTOS functions that end in FromISR can be called from interrupts
+ that have been assigned a priority at or (logically) below the maximum
+ system call interrupt priority. FreeRTOS maintains a separate interrupt
+ safe API to ensure interrupt entry is as fast and as simple as possible.
+ More information (albeit Cortex-M specific) is provided on the following
+ link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ /* Similar to xQueueGenericSend, except without blocking if there is no room
+ in the queue. Also don't directly wake a task that was blocked on a queue
+ read, instead return a flag to say whether a context switch is required or
+ not (i.e. has a task with a higher priority than us been woken by this
+ post). */
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ if( ( pxQueue->uxMessagesWaiting < pxQueue->uxLength ) || ( xCopyPosition == queueOVERWRITE ) )
+ {
+ const int8_t cTxLock = pxQueue->cTxLock;
+
+ traceQUEUE_SEND_FROM_ISR( pxQueue );
+
+ /* Semaphores use xQueueGiveFromISR(), so pxQueue will not be a
+ semaphore or mutex. That means prvCopyDataToQueue() cannot result
+ in a task disinheriting a priority and prvCopyDataToQueue() can be
+ called here even though the disinherit function does not check if
+ the scheduler is suspended before accessing the ready lists. */
+ ( void ) prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+ /* The event list is not altered if the queue is locked. This will
+ be done when the queue is unlocked later. */
+ if( cTxLock == queueUNLOCKED )
+ {
+ #if ( configUSE_QUEUE_SETS == 1 )
+ {
+ if( pxQueue->pxQueueSetContainer != NULL )
+ {
+ if( prvNotifyQueueSetContainer( pxQueue, xCopyPosition ) != pdFALSE )
+ {
+ /* The queue is a member of a queue set, and posting
+ to the queue set caused a higher priority task to
+ unblock. A context switch is required. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority so
+ record that a context switch is required. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ #else /* configUSE_QUEUE_SETS */
+ {
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority so record that a
+ context switch is required. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_QUEUE_SETS */
+ }
+ else
+ {
+ /* Increment the lock count so the task that unlocks the queue
+ knows that data was posted while it was locked. */
+ pxQueue->cTxLock = ( int8_t ) ( cTxLock + 1 );
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );
+ xReturn = errQUEUE_FULL;
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType_t * const pxHigherPriorityTaskWoken )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ /* Similar to xQueueGenericSendFromISR() but used with semaphores where the
+ item size is 0. Don't directly wake a task that was blocked on a queue
+ read, instead return a flag to say whether a context switch is required or
+ not (i.e. has a task with a higher priority than us been woken by this
+ post). */
+
+ configASSERT( pxQueue );
+
+ /* xQueueGenericSendFromISR() should be used instead of xQueueGiveFromISR()
+ if the item size is not 0. */
+ configASSERT( pxQueue->uxItemSize == 0 );
+
+ /* Normally a mutex would not be given from an interrupt, especially if
+ there is a mutex holder, as priority inheritance makes no sense for an
+ interrupts, only tasks. */
+ configASSERT( !( ( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX ) && ( pxQueue->pxMutexHolder != NULL ) ) );
+
+ /* RTOS ports that support interrupt nesting have the concept of a maximum
+ system call (or maximum API call) interrupt priority. Interrupts that are
+ above the maximum system call priority are kept permanently enabled, even
+ when the RTOS kernel is in a critical section, but cannot make any calls to
+ FreeRTOS API functions. If configASSERT() is defined in FreeRTOSConfig.h
+ then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has been
+ assigned a priority above the configured maximum system call priority.
+ Only FreeRTOS functions that end in FromISR can be called from interrupts
+ that have been assigned a priority at or (logically) below the maximum
+ system call interrupt priority. FreeRTOS maintains a separate interrupt
+ safe API to ensure interrupt entry is as fast and as simple as possible.
+ More information (albeit Cortex-M specific) is provided on the following
+ link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+ /* When the queue is used to implement a semaphore no data is ever
+ moved through the queue but it is still valid to see if the queue 'has
+ space'. */
+ if( uxMessagesWaiting < pxQueue->uxLength )
+ {
+ const int8_t cTxLock = pxQueue->cTxLock;
+
+ traceQUEUE_SEND_FROM_ISR( pxQueue );
+
+ /* A task can only have an inherited priority if it is a mutex
+ holder - and if there is a mutex holder then the mutex cannot be
+ given from an ISR. As this is the ISR version of the function it
+ can be assumed there is no mutex holder and no need to determine if
+ priority disinheritance is needed. Simply increase the count of
+ messages (semaphores) available. */
+ pxQueue->uxMessagesWaiting = uxMessagesWaiting + 1;
+
+ /* The event list is not altered if the queue is locked. This will
+ be done when the queue is unlocked later. */
+ if( cTxLock == queueUNLOCKED )
+ {
+ #if ( configUSE_QUEUE_SETS == 1 )
+ {
+ if( pxQueue->pxQueueSetContainer != NULL )
+ {
+ if( prvNotifyQueueSetContainer( pxQueue, queueSEND_TO_BACK ) != pdFALSE )
+ {
+ /* The semaphore is a member of a queue set, and
+ posting to the queue set caused a higher priority
+ task to unblock. A context switch is required. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority so
+ record that a context switch is required. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ #else /* configUSE_QUEUE_SETS */
+ {
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority so record that a
+ context switch is required. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_QUEUE_SETS */
+ }
+ else
+ {
+ /* Increment the lock count so the task that unlocks the queue
+ knows that data was posted while it was locked. */
+ pxQueue->cTxLock = ( int8_t ) ( cTxLock + 1 );
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );
+ xReturn = errQUEUE_FULL;
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait, const BaseType_t xJustPeeking )
+{
+BaseType_t xEntryTimeSet = pdFALSE;
+TimeOut_t xTimeOut;
+int8_t *pcOriginalReadPosition;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ configASSERT( pxQueue );
+ configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+ #if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+ {
+ configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
+ }
+ #endif
+
+ /* This function relaxes the coding standard somewhat to allow return
+ statements within the function itself. This is done in the interest
+ of execution time efficiency. */
+
+ for( ;; )
+ {
+ taskENTER_CRITICAL();
+ {
+ const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+ /* Is there data in the queue now? To be running the calling task
+ must be the highest priority task wanting to access the queue. */
+ if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+ {
+ /* Remember the read position in case the queue is only being
+ peeked. */
+ pcOriginalReadPosition = pxQueue->u.pcReadFrom;
+
+ prvCopyDataFromQueue( pxQueue, pvBuffer );
+
+ if( xJustPeeking == pdFALSE )
+ {
+ traceQUEUE_RECEIVE( pxQueue );
+
+ /* Actually removing data, not just peeking. */
+ pxQueue->uxMessagesWaiting = uxMessagesWaiting - 1;
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ /* Record the information required to implement
+ priority inheritance should it become necessary. */
+ pxQueue->pxMutexHolder = ( int8_t * ) pvTaskIncrementMutexHeldCount(); /*lint !e961 Cast is not redundant as TaskHandle_t is a typedef. */
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_MUTEXES */
+
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ queueYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ traceQUEUE_PEEK( pxQueue );
+
+ /* The data is not being removed, so reset the read
+ pointer. */
+ pxQueue->u.pcReadFrom = pcOriginalReadPosition;
+
+ /* The data is being left in the queue, so see if there are
+ any other tasks waiting for the data. */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority than this task. */
+ queueYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ taskEXIT_CRITICAL();
+ return pdPASS;
+ }
+ else
+ {
+ if( xTicksToWait == ( TickType_t ) 0 )
+ {
+ /* The queue was empty and no block time is specified (or
+ the block time has expired) so leave now. */
+ taskEXIT_CRITICAL();
+ traceQUEUE_RECEIVE_FAILED( pxQueue );
+ return errQUEUE_EMPTY;
+ }
+ else if( xEntryTimeSet == pdFALSE )
+ {
+ /* The queue was empty and a block time was specified so
+ configure the timeout structure. */
+ vTaskSetTimeOutState( &xTimeOut );
+ xEntryTimeSet = pdTRUE;
+ }
+ else
+ {
+ /* Entry time was already set. */
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ /* Interrupts and other tasks can send to and receive from the queue
+ now the critical section has been exited. */
+
+ vTaskSuspendAll();
+ prvLockQueue( pxQueue );
+
+ /* Update the timeout state to see if it has expired yet. */
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+ {
+ if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+ {
+ traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ taskENTER_CRITICAL();
+ {
+ vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );
+ }
+ taskEXIT_CRITICAL();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif
+
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
+ prvUnlockQueue( pxQueue );
+ if( xTaskResumeAll() == pdFALSE )
+ {
+ portYIELD_WITHIN_API();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ /* Try again. */
+ prvUnlockQueue( pxQueue );
+ ( void ) xTaskResumeAll();
+ }
+ }
+ else
+ {
+ prvUnlockQueue( pxQueue );
+ ( void ) xTaskResumeAll();
+
+ if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+ {
+ traceQUEUE_RECEIVE_FAILED( pxQueue );
+ return errQUEUE_EMPTY;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueReceiveFromISR( QueueHandle_t xQueue, void * const pvBuffer, BaseType_t * const pxHigherPriorityTaskWoken )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ configASSERT( pxQueue );
+ configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+
+ /* RTOS ports that support interrupt nesting have the concept of a maximum
+ system call (or maximum API call) interrupt priority. Interrupts that are
+ above the maximum system call priority are kept permanently enabled, even
+ when the RTOS kernel is in a critical section, but cannot make any calls to
+ FreeRTOS API functions. If configASSERT() is defined in FreeRTOSConfig.h
+ then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has been
+ assigned a priority above the configured maximum system call priority.
+ Only FreeRTOS functions that end in FromISR can be called from interrupts
+ that have been assigned a priority at or (logically) below the maximum
+ system call interrupt priority. FreeRTOS maintains a separate interrupt
+ safe API to ensure interrupt entry is as fast and as simple as possible.
+ More information (albeit Cortex-M specific) is provided on the following
+ link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+ /* Cannot block in an ISR, so check there is data available. */
+ if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+ {
+ const int8_t cRxLock = pxQueue->cRxLock;
+
+ traceQUEUE_RECEIVE_FROM_ISR( pxQueue );
+
+ prvCopyDataFromQueue( pxQueue, pvBuffer );
+ pxQueue->uxMessagesWaiting = uxMessagesWaiting - 1;
+
+ /* If the queue is locked the event list will not be modified.
+ Instead update the lock count so the task that unlocks the queue
+ will know that an ISR has removed data while the queue was
+ locked. */
+ if( cRxLock == queueUNLOCKED )
+ {
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority than us so
+ force a context switch. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ /* Increment the lock count so the task that unlocks the queue
+ knows that data was removed while it was locked. */
+ pxQueue->cRxLock = ( int8_t ) ( cRxLock + 1 );
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue );
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue, void * const pvBuffer )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+int8_t *pcOriginalReadPosition;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ configASSERT( pxQueue );
+ configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+ configASSERT( pxQueue->uxItemSize != 0 ); /* Can't peek a semaphore. */
+
+ /* RTOS ports that support interrupt nesting have the concept of a maximum
+ system call (or maximum API call) interrupt priority. Interrupts that are
+ above the maximum system call priority are kept permanently enabled, even
+ when the RTOS kernel is in a critical section, but cannot make any calls to
+ FreeRTOS API functions. If configASSERT() is defined in FreeRTOSConfig.h
+ then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has been
+ assigned a priority above the configured maximum system call priority.
+ Only FreeRTOS functions that end in FromISR can be called from interrupts
+ that have been assigned a priority at or (logically) below the maximum
+ system call interrupt priority. FreeRTOS maintains a separate interrupt
+ safe API to ensure interrupt entry is as fast and as simple as possible.
+ More information (albeit Cortex-M specific) is provided on the following
+ link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ /* Cannot block in an ISR, so check there is data available. */
+ if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+ {
+ traceQUEUE_PEEK_FROM_ISR( pxQueue );
+
+ /* Remember the read position so it can be reset as nothing is
+ actually being removed from the queue. */
+ pcOriginalReadPosition = pxQueue->u.pcReadFrom;
+ prvCopyDataFromQueue( pxQueue, pvBuffer );
+ pxQueue->u.pcReadFrom = pcOriginalReadPosition;
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ traceQUEUE_PEEK_FROM_ISR_FAILED( pxQueue );
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+
+ configASSERT( xQueue );
+
+ taskENTER_CRITICAL();
+ {
+ uxReturn = ( ( Queue_t * ) xQueue )->uxMessagesWaiting;
+ }
+ taskEXIT_CRITICAL();
+
+ return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+Queue_t *pxQueue;
+
+ pxQueue = ( Queue_t * ) xQueue;
+ configASSERT( pxQueue );
+
+ taskENTER_CRITICAL();
+ {
+ uxReturn = pxQueue->uxLength - pxQueue->uxMessagesWaiting;
+ }
+ taskEXIT_CRITICAL();
+
+ return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+
+ configASSERT( xQueue );
+
+ uxReturn = ( ( Queue_t * ) xQueue )->uxMessagesWaiting;
+
+ return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+void vQueueDelete( QueueHandle_t xQueue )
+{
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ configASSERT( pxQueue );
+ traceQUEUE_DELETE( pxQueue );
+
+ #if ( configQUEUE_REGISTRY_SIZE > 0 )
+ {
+ vQueueUnregisterQueue( pxQueue );
+ }
+ #endif
+
+ #if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) )
+ {
+ /* The queue can only have been allocated dynamically - free it
+ again. */
+ vPortFree( pxQueue );
+ }
+ #elif( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+ {
+ /* The queue could have been allocated statically or dynamically, so
+ check before attempting to free the memory. */
+ if( pxQueue->ucStaticallyAllocated == ( uint8_t ) pdFALSE )
+ {
+ vPortFree( pxQueue );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #else
+ {
+ /* The queue must have been statically allocated, so is not going to be
+ deleted. Avoid compiler warnings about the unused parameter. */
+ ( void ) pxQueue;
+ }
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ UBaseType_t uxQueueGetQueueNumber( QueueHandle_t xQueue )
+ {
+ return ( ( Queue_t * ) xQueue )->uxQueueNumber;
+ }
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ void vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber )
+ {
+ ( ( Queue_t * ) xQueue )->uxQueueNumber = uxQueueNumber;
+ }
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ uint8_t ucQueueGetQueueType( QueueHandle_t xQueue )
+ {
+ return ( ( Queue_t * ) xQueue )->ucQueueType;
+ }
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvCopyDataToQueue( Queue_t * const pxQueue, const void *pvItemToQueue, const BaseType_t xPosition )
+{
+BaseType_t xReturn = pdFALSE;
+UBaseType_t uxMessagesWaiting;
+
+ /* This function is called from a critical section. */
+
+ uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+ if( pxQueue->uxItemSize == ( UBaseType_t ) 0 )
+ {
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ /* The mutex is no longer being held. */
+ xReturn = xTaskPriorityDisinherit( ( void * ) pxQueue->pxMutexHolder );
+ pxQueue->pxMutexHolder = NULL;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_MUTEXES */
+ }
+ else if( xPosition == queueSEND_TO_BACK )
+ {
+ ( void ) memcpy( ( void * ) pxQueue->pcWriteTo, pvItemToQueue, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 !e418 MISRA exception as the casts are only redundant for some ports, plus previous logic ensures a null pointer can only be passed to memcpy() if the copy size is 0. */
+ pxQueue->pcWriteTo += pxQueue->uxItemSize;
+ if( pxQueue->pcWriteTo >= pxQueue->pcTail ) /*lint !e946 MISRA exception justified as comparison of pointers is the cleanest solution. */
+ {
+ pxQueue->pcWriteTo = pxQueue->pcHead;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ ( void ) memcpy( ( void * ) pxQueue->u.pcReadFrom, pvItemToQueue, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+ pxQueue->u.pcReadFrom -= pxQueue->uxItemSize;
+ if( pxQueue->u.pcReadFrom < pxQueue->pcHead ) /*lint !e946 MISRA exception justified as comparison of pointers is the cleanest solution. */
+ {
+ pxQueue->u.pcReadFrom = ( pxQueue->pcTail - pxQueue->uxItemSize );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ if( xPosition == queueOVERWRITE )
+ {
+ if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+ {
+ /* An item is not being added but overwritten, so subtract
+ one from the recorded number of items in the queue so when
+ one is added again below the number of recorded items remains
+ correct. */
+ --uxMessagesWaiting;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ pxQueue->uxMessagesWaiting = uxMessagesWaiting + 1;
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCopyDataFromQueue( Queue_t * const pxQueue, void * const pvBuffer )
+{
+ if( pxQueue->uxItemSize != ( UBaseType_t ) 0 )
+ {
+ pxQueue->u.pcReadFrom += pxQueue->uxItemSize;
+ if( pxQueue->u.pcReadFrom >= pxQueue->pcTail ) /*lint !e946 MISRA exception justified as use of the relational operator is the cleanest solutions. */
+ {
+ pxQueue->u.pcReadFrom = pxQueue->pcHead;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ ( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.pcReadFrom, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 !e418 MISRA exception as the casts are only redundant for some ports. Also previous logic ensures a null pointer can only be passed to memcpy() when the count is 0. */
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvUnlockQueue( Queue_t * const pxQueue )
+{
+ /* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. */
+
+ /* The lock counts contains the number of extra data items placed or
+ removed from the queue while the queue was locked. When a queue is
+ locked items can be added or removed, but the event lists cannot be
+ updated. */
+ taskENTER_CRITICAL();
+ {
+ int8_t cTxLock = pxQueue->cTxLock;
+
+ /* See if data was added to the queue while it was locked. */
+ while( cTxLock > queueLOCKED_UNMODIFIED )
+ {
+ /* Data was posted while the queue was locked. Are any tasks
+ blocked waiting for data to become available? */
+ #if ( configUSE_QUEUE_SETS == 1 )
+ {
+ if( pxQueue->pxQueueSetContainer != NULL )
+ {
+ if( prvNotifyQueueSetContainer( pxQueue, queueSEND_TO_BACK ) != pdFALSE )
+ {
+ /* The queue is a member of a queue set, and posting to
+ the queue set caused a higher priority task to unblock.
+ A context switch is required. */
+ vTaskMissedYield();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ /* Tasks that are removed from the event list will get
+ added to the pending ready list as the scheduler is still
+ suspended. */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority so record that a
+ context switch is required. */
+ vTaskMissedYield();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ break;
+ }
+ }
+ }
+ #else /* configUSE_QUEUE_SETS */
+ {
+ /* Tasks that are removed from the event list will get added to
+ the pending ready list as the scheduler is still suspended. */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority so record that
+ a context switch is required. */
+ vTaskMissedYield();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ break;
+ }
+ }
+ #endif /* configUSE_QUEUE_SETS */
+
+ --cTxLock;
+ }
+
+ pxQueue->cTxLock = queueUNLOCKED;
+ }
+ taskEXIT_CRITICAL();
+
+ /* Do the same for the Rx lock. */
+ taskENTER_CRITICAL();
+ {
+ int8_t cRxLock = pxQueue->cRxLock;
+
+ while( cRxLock > queueLOCKED_UNMODIFIED )
+ {
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ vTaskMissedYield();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ --cRxLock;
+ }
+ else
+ {
+ break;
+ }
+ }
+
+ pxQueue->cRxLock = queueUNLOCKED;
+ }
+ taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvIsQueueEmpty( const Queue_t *pxQueue )
+{
+BaseType_t xReturn;
+
+ taskENTER_CRITICAL();
+ {
+ if( pxQueue->uxMessagesWaiting == ( UBaseType_t ) 0 )
+ {
+ xReturn = pdTRUE;
+ }
+ else
+ {
+ xReturn = pdFALSE;
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue )
+{
+BaseType_t xReturn;
+
+ configASSERT( xQueue );
+ if( ( ( Queue_t * ) xQueue )->uxMessagesWaiting == ( UBaseType_t ) 0 )
+ {
+ xReturn = pdTRUE;
+ }
+ else
+ {
+ xReturn = pdFALSE;
+ }
+
+ return xReturn;
+} /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvIsQueueFull( const Queue_t *pxQueue )
+{
+BaseType_t xReturn;
+
+ taskENTER_CRITICAL();
+ {
+ if( pxQueue->uxMessagesWaiting == pxQueue->uxLength )
+ {
+ xReturn = pdTRUE;
+ }
+ else
+ {
+ xReturn = pdFALSE;
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueIsQueueFullFromISR( const QueueHandle_t xQueue )
+{
+BaseType_t xReturn;
+
+ configASSERT( xQueue );
+ if( ( ( Queue_t * ) xQueue )->uxMessagesWaiting == ( ( Queue_t * ) xQueue )->uxLength )
+ {
+ xReturn = pdTRUE;
+ }
+ else
+ {
+ xReturn = pdFALSE;
+ }
+
+ return xReturn;
+} /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+ BaseType_t xQueueCRSend( QueueHandle_t xQueue, const void *pvItemToQueue, TickType_t xTicksToWait )
+ {
+ BaseType_t xReturn;
+ Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ /* If the queue is already full we may have to block. A critical section
+ is required to prevent an interrupt removing something from the queue
+ between the check to see if the queue is full and blocking on the queue. */
+ portDISABLE_INTERRUPTS();
+ {
+ if( prvIsQueueFull( pxQueue ) != pdFALSE )
+ {
+ /* The queue is full - do we want to block or just leave without
+ posting? */
+ if( xTicksToWait > ( TickType_t ) 0 )
+ {
+ /* As this is called from a coroutine we cannot block directly, but
+ return indicating that we need to block. */
+ vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToSend ) );
+ portENABLE_INTERRUPTS();
+ return errQUEUE_BLOCKED;
+ }
+ else
+ {
+ portENABLE_INTERRUPTS();
+ return errQUEUE_FULL;
+ }
+ }
+ }
+ portENABLE_INTERRUPTS();
+
+ portDISABLE_INTERRUPTS();
+ {
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+ {
+ /* There is room in the queue, copy the data into the queue. */
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );
+ xReturn = pdPASS;
+
+ /* Were any co-routines waiting for data to become available? */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ /* In this instance the co-routine could be placed directly
+ into the ready list as we are within a critical section.
+ Instead the same pending ready list mechanism is used as if
+ the event were caused from within an interrupt. */
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The co-routine waiting has a higher priority so record
+ that a yield might be appropriate. */
+ xReturn = errQUEUE_YIELD;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ xReturn = errQUEUE_FULL;
+ }
+ }
+ portENABLE_INTERRUPTS();
+
+ return xReturn;
+ }
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+ BaseType_t xQueueCRReceive( QueueHandle_t xQueue, void *pvBuffer, TickType_t xTicksToWait )
+ {
+ BaseType_t xReturn;
+ Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ /* If the queue is already empty we may have to block. A critical section
+ is required to prevent an interrupt adding something to the queue
+ between the check to see if the queue is empty and blocking on the queue. */
+ portDISABLE_INTERRUPTS();
+ {
+ if( pxQueue->uxMessagesWaiting == ( UBaseType_t ) 0 )
+ {
+ /* There are no messages in the queue, do we want to block or just
+ leave with nothing? */
+ if( xTicksToWait > ( TickType_t ) 0 )
+ {
+ /* As this is a co-routine we cannot block directly, but return
+ indicating that we need to block. */
+ vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToReceive ) );
+ portENABLE_INTERRUPTS();
+ return errQUEUE_BLOCKED;
+ }
+ else
+ {
+ portENABLE_INTERRUPTS();
+ return errQUEUE_FULL;
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ portENABLE_INTERRUPTS();
+
+ portDISABLE_INTERRUPTS();
+ {
+ if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+ {
+ /* Data is available from the queue. */
+ pxQueue->u.pcReadFrom += pxQueue->uxItemSize;
+ if( pxQueue->u.pcReadFrom >= pxQueue->pcTail )
+ {
+ pxQueue->u.pcReadFrom = pxQueue->pcHead;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ --( pxQueue->uxMessagesWaiting );
+ ( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+
+ xReturn = pdPASS;
+
+ /* Were any co-routines waiting for space to become available? */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+ {
+ /* In this instance the co-routine could be placed directly
+ into the ready list as we are within a critical section.
+ Instead the same pending ready list mechanism is used as if
+ the event were caused from within an interrupt. */
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ xReturn = errQUEUE_YIELD;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ }
+ }
+ portENABLE_INTERRUPTS();
+
+ return xReturn;
+ }
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+ BaseType_t xQueueCRSendFromISR( QueueHandle_t xQueue, const void *pvItemToQueue, BaseType_t xCoRoutinePreviouslyWoken )
+ {
+ Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ /* Cannot block within an ISR so if there is no space on the queue then
+ exit without doing anything. */
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+ {
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );
+
+ /* We only want to wake one co-routine per ISR, so check that a
+ co-routine has not already been woken. */
+ if( xCoRoutinePreviouslyWoken == pdFALSE )
+ {
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ return pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ return xCoRoutinePreviouslyWoken;
+ }
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+ BaseType_t xQueueCRReceiveFromISR( QueueHandle_t xQueue, void *pvBuffer, BaseType_t *pxCoRoutineWoken )
+ {
+ BaseType_t xReturn;
+ Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ /* We cannot block from an ISR, so check there is data available. If
+ not then just leave without doing anything. */
+ if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+ {
+ /* Copy the data from the queue. */
+ pxQueue->u.pcReadFrom += pxQueue->uxItemSize;
+ if( pxQueue->u.pcReadFrom >= pxQueue->pcTail )
+ {
+ pxQueue->u.pcReadFrom = pxQueue->pcHead;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ --( pxQueue->uxMessagesWaiting );
+ ( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+
+ if( ( *pxCoRoutineWoken ) == pdFALSE )
+ {
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+ {
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ *pxCoRoutineWoken = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+ void vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcQueueName ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ {
+ UBaseType_t ux;
+
+ /* See if there is an empty space in the registry. A NULL name denotes
+ a free slot. */
+ for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+ {
+ if( xQueueRegistry[ ux ].pcQueueName == NULL )
+ {
+ /* Store the information on this queue. */
+ xQueueRegistry[ ux ].pcQueueName = pcQueueName;
+ xQueueRegistry[ ux ].xHandle = xQueue;
+
+ traceQUEUE_REGISTRY_ADD( xQueue, pcQueueName );
+ break;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+ const char *pcQueueGetName( QueueHandle_t xQueue ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ {
+ UBaseType_t ux;
+ const char *pcReturn = NULL; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+ /* Note there is nothing here to protect against another task adding or
+ removing entries from the registry while it is being searched. */
+ for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+ {
+ if( xQueueRegistry[ ux ].xHandle == xQueue )
+ {
+ pcReturn = xQueueRegistry[ ux ].pcQueueName;
+ break;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ return pcReturn;
+ }
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+ void vQueueUnregisterQueue( QueueHandle_t xQueue )
+ {
+ UBaseType_t ux;
+
+ /* See if the handle of the queue being unregistered in actually in the
+ registry. */
+ for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+ {
+ if( xQueueRegistry[ ux ].xHandle == xQueue )
+ {
+ /* Set the name to NULL to show that this slot if free again. */
+ xQueueRegistry[ ux ].pcQueueName = NULL;
+
+ /* Set the handle to NULL to ensure the same queue handle cannot
+ appear in the registry twice if it is added, removed, then
+ added again. */
+ xQueueRegistry[ ux ].xHandle = ( QueueHandle_t ) 0;
+ break;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ } /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TIMERS == 1 )
+
+ void vQueueWaitForMessageRestricted( QueueHandle_t xQueue, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely )
+ {
+ Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+ /* This function should not be called by application code hence the
+ 'Restricted' in its name. It is not part of the public API. It is
+ designed for use by kernel code, and has special calling requirements.
+ It can result in vListInsert() being called on a list that can only
+ possibly ever have one item in it, so the list will be fast, but even
+ so it should be called with the scheduler locked and not from a critical
+ section. */
+
+ /* Only do anything if there are no messages in the queue. This function
+ will not actually cause the task to block, just place it on a blocked
+ list. It will not block until the scheduler is unlocked - at which
+ time a yield will be performed. If an item is added to the queue while
+ the queue is locked, and the calling task blocks on the queue, then the
+ calling task will be immediately unblocked when the queue is unlocked. */
+ prvLockQueue( pxQueue );
+ if( pxQueue->uxMessagesWaiting == ( UBaseType_t ) 0U )
+ {
+ /* There is nothing in the queue, block for the specified period. */
+ vTaskPlaceOnEventListRestricted( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait, xWaitIndefinitely );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ prvUnlockQueue( pxQueue );
+ }
+
+#endif /* configUSE_TIMERS */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_QUEUE_SETS == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+ QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQueueLength )
+ {
+ QueueSetHandle_t pxQueue;
+
+ pxQueue = xQueueGenericCreate( uxEventQueueLength, sizeof( Queue_t * ), queueQUEUE_TYPE_SET );
+
+ return pxQueue;
+ }
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+ BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet )
+ {
+ BaseType_t xReturn;
+
+ taskENTER_CRITICAL();
+ {
+ if( ( ( Queue_t * ) xQueueOrSemaphore )->pxQueueSetContainer != NULL )
+ {
+ /* Cannot add a queue/semaphore to more than one queue set. */
+ xReturn = pdFAIL;
+ }
+ else if( ( ( Queue_t * ) xQueueOrSemaphore )->uxMessagesWaiting != ( UBaseType_t ) 0 )
+ {
+ /* Cannot add a queue/semaphore to a queue set if there are already
+ items in the queue/semaphore. */
+ xReturn = pdFAIL;
+ }
+ else
+ {
+ ( ( Queue_t * ) xQueueOrSemaphore )->pxQueueSetContainer = xQueueSet;
+ xReturn = pdPASS;
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+ }
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+ BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet )
+ {
+ BaseType_t xReturn;
+ Queue_t * const pxQueueOrSemaphore = ( Queue_t * ) xQueueOrSemaphore;
+
+ if( pxQueueOrSemaphore->pxQueueSetContainer != xQueueSet )
+ {
+ /* The queue was not a member of the set. */
+ xReturn = pdFAIL;
+ }
+ else if( pxQueueOrSemaphore->uxMessagesWaiting != ( UBaseType_t ) 0 )
+ {
+ /* It is dangerous to remove a queue from a set when the queue is
+ not empty because the queue set will still hold pending events for
+ the queue. */
+ xReturn = pdFAIL;
+ }
+ else
+ {
+ taskENTER_CRITICAL();
+ {
+ /* The queue is no longer contained in the set. */
+ pxQueueOrSemaphore->pxQueueSetContainer = NULL;
+ }
+ taskEXIT_CRITICAL();
+ xReturn = pdPASS;
+ }
+
+ return xReturn;
+ } /*lint !e818 xQueueSet could not be declared as pointing to const as it is a typedef. */
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+ QueueSetMemberHandle_t xQueueSelectFromSet( QueueSetHandle_t xQueueSet, TickType_t const xTicksToWait )
+ {
+ QueueSetMemberHandle_t xReturn = NULL;
+
+ ( void ) xQueueGenericReceive( ( QueueHandle_t ) xQueueSet, &xReturn, xTicksToWait, pdFALSE ); /*lint !e961 Casting from one typedef to another is not redundant. */
+ return xReturn;
+ }
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+ QueueSetMemberHandle_t xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet )
+ {
+ QueueSetMemberHandle_t xReturn = NULL;
+
+ ( void ) xQueueReceiveFromISR( ( QueueHandle_t ) xQueueSet, &xReturn, NULL ); /*lint !e961 Casting from one typedef to another is not redundant. */
+ return xReturn;
+ }
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+ static BaseType_t prvNotifyQueueSetContainer( const Queue_t * const pxQueue, const BaseType_t xCopyPosition )
+ {
+ Queue_t *pxQueueSetContainer = pxQueue->pxQueueSetContainer;
+ BaseType_t xReturn = pdFALSE;
+
+ /* This function must be called form a critical section. */
+
+ configASSERT( pxQueueSetContainer );
+ configASSERT( pxQueueSetContainer->uxMessagesWaiting < pxQueueSetContainer->uxLength );
+
+ if( pxQueueSetContainer->uxMessagesWaiting < pxQueueSetContainer->uxLength )
+ {
+ const int8_t cTxLock = pxQueueSetContainer->cTxLock;
+
+ traceQUEUE_SEND( pxQueueSetContainer );
+
+ /* The data copied is the handle of the queue that contains data. */
+ xReturn = prvCopyDataToQueue( pxQueueSetContainer, &pxQueue, xCopyPosition );
+
+ if( cTxLock == queueUNLOCKED )
+ {
+ if( listLIST_IS_EMPTY( &( pxQueueSetContainer->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueueSetContainer->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority. */
+ xReturn = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ pxQueueSetContainer->cTxLock = ( int8_t ) ( cTxLock + 1 );
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_QUEUE_SETS */
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/tasks.c b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/tasks.c
new file mode 100644
index 0000000..8aea1cd
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/tasks.c
@@ -0,0 +1,4807 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+/* Standard includes. */
+#include
+#include
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers. That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* FreeRTOS includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "timers.h"
+#include "StackMacros.h"
+
+/* Lint e961 and e750 are suppressed as a MISRA exception justified because the
+MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined for the
+header files above, but not in this file, in order to generate the correct
+privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750. */
+
+/* Set configUSE_STATS_FORMATTING_FUNCTIONS to 2 to include the stats formatting
+functions but without including stdio.h here. */
+#if ( configUSE_STATS_FORMATTING_FUNCTIONS == 1 )
+ /* At the bottom of this file are two optional functions that can be used
+ to generate human readable text from the raw data generated by the
+ uxTaskGetSystemState() function. Note the formatting functions are provided
+ for convenience only, and are NOT considered part of the kernel. */
+ #include
+#endif /* configUSE_STATS_FORMATTING_FUNCTIONS == 1 ) */
+
+#if( configUSE_PREEMPTION == 0 )
+ /* If the cooperative scheduler is being used then a yield should not be
+ performed just because a higher priority task has been woken. */
+ #define taskYIELD_IF_USING_PREEMPTION()
+#else
+ #define taskYIELD_IF_USING_PREEMPTION() portYIELD_WITHIN_API()
+#endif
+
+/* Values that can be assigned to the ucNotifyState member of the TCB. */
+#define taskNOT_WAITING_NOTIFICATION ( ( uint8_t ) 0 )
+#define taskWAITING_NOTIFICATION ( ( uint8_t ) 1 )
+#define taskNOTIFICATION_RECEIVED ( ( uint8_t ) 2 )
+
+/*
+ * The value used to fill the stack of a task when the task is created. This
+ * is used purely for checking the high water mark for tasks.
+ */
+#define tskSTACK_FILL_BYTE ( 0xa5U )
+
+/* Sometimes the FreeRTOSConfig.h settings only allow a task to be created using
+dynamically allocated RAM, in which case when any task is deleted it is known
+that both the task's stack and TCB need to be freed. Sometimes the
+FreeRTOSConfig.h settings only allow a task to be created using statically
+allocated RAM, in which case when any task is deleted it is known that neither
+the task's stack or TCB should be freed. Sometimes the FreeRTOSConfig.h
+settings allow a task to be created using either statically or dynamically
+allocated RAM, in which case a member of the TCB is used to record whether the
+stack and/or TCB were allocated statically or dynamically, so when a task is
+deleted the RAM that was allocated dynamically is freed again and no attempt is
+made to free the RAM that was allocated statically.
+tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE is only true if it is possible for a
+task to be created using either statically or dynamically allocated RAM. Note
+that if portUSING_MPU_WRAPPERS is 1 then a protected task can be created with
+a statically allocated stack and a dynamically allocated TCB. */
+#define tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE ( ( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) || ( portUSING_MPU_WRAPPERS == 1 ) )
+#define tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB ( ( uint8_t ) 0 )
+#define tskSTATICALLY_ALLOCATED_STACK_ONLY ( ( uint8_t ) 1 )
+#define tskSTATICALLY_ALLOCATED_STACK_AND_TCB ( ( uint8_t ) 2 )
+
+/*
+ * Macros used by vListTask to indicate which state a task is in.
+ */
+#define tskBLOCKED_CHAR ( 'B' )
+#define tskREADY_CHAR ( 'R' )
+#define tskDELETED_CHAR ( 'D' )
+#define tskSUSPENDED_CHAR ( 'S' )
+
+/*
+ * Some kernel aware debuggers require the data the debugger needs access to be
+ * global, rather than file scope.
+ */
+#ifdef portREMOVE_STATIC_QUALIFIER
+ #define static
+#endif
+
+#if ( configUSE_PORT_OPTIMISED_TASK_SELECTION == 0 )
+
+ /* If configUSE_PORT_OPTIMISED_TASK_SELECTION is 0 then task selection is
+ performed in a generic way that is not optimised to any particular
+ microcontroller architecture. */
+
+ /* uxTopReadyPriority holds the priority of the highest priority ready
+ state task. */
+ #define taskRECORD_READY_PRIORITY( uxPriority ) \
+ { \
+ if( ( uxPriority ) > uxTopReadyPriority ) \
+ { \
+ uxTopReadyPriority = ( uxPriority ); \
+ } \
+ } /* taskRECORD_READY_PRIORITY */
+
+ /*-----------------------------------------------------------*/
+
+ #define taskSELECT_HIGHEST_PRIORITY_TASK() \
+ { \
+ UBaseType_t uxTopPriority = uxTopReadyPriority; \
+ \
+ /* Find the highest priority queue that contains ready tasks. */ \
+ while( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxTopPriority ] ) ) ) \
+ { \
+ configASSERT( uxTopPriority ); \
+ --uxTopPriority; \
+ } \
+ \
+ /* listGET_OWNER_OF_NEXT_ENTRY indexes through the list, so the tasks of \
+ the same priority get an equal share of the processor time. */ \
+ listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopPriority ] ) ); \
+ uxTopReadyPriority = uxTopPriority; \
+ } /* taskSELECT_HIGHEST_PRIORITY_TASK */
+
+ /*-----------------------------------------------------------*/
+
+ /* Define away taskRESET_READY_PRIORITY() and portRESET_READY_PRIORITY() as
+ they are only required when a port optimised method of task selection is
+ being used. */
+ #define taskRESET_READY_PRIORITY( uxPriority )
+ #define portRESET_READY_PRIORITY( uxPriority, uxTopReadyPriority )
+
+#else /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+
+ /* If configUSE_PORT_OPTIMISED_TASK_SELECTION is 1 then task selection is
+ performed in a way that is tailored to the particular microcontroller
+ architecture being used. */
+
+ /* A port optimised version is provided. Call the port defined macros. */
+ #define taskRECORD_READY_PRIORITY( uxPriority ) portRECORD_READY_PRIORITY( uxPriority, uxTopReadyPriority )
+
+ /*-----------------------------------------------------------*/
+
+ #define taskSELECT_HIGHEST_PRIORITY_TASK() \
+ { \
+ UBaseType_t uxTopPriority; \
+ \
+ /* Find the highest priority list that contains ready tasks. */ \
+ portGET_HIGHEST_PRIORITY( uxTopPriority, uxTopReadyPriority ); \
+ configASSERT( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ uxTopPriority ] ) ) > 0 ); \
+ listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopPriority ] ) ); \
+ } /* taskSELECT_HIGHEST_PRIORITY_TASK() */
+
+ /*-----------------------------------------------------------*/
+
+ /* A port optimised version is provided, call it only if the TCB being reset
+ is being referenced from a ready list. If it is referenced from a delayed
+ or suspended list then it won't be in a ready list. */
+ #define taskRESET_READY_PRIORITY( uxPriority ) \
+ { \
+ if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ ( uxPriority ) ] ) ) == ( UBaseType_t ) 0 ) \
+ { \
+ portRESET_READY_PRIORITY( ( uxPriority ), ( uxTopReadyPriority ) ); \
+ } \
+ }
+
+#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+
+/*-----------------------------------------------------------*/
+
+/* pxDelayedTaskList and pxOverflowDelayedTaskList are switched when the tick
+count overflows. */
+#define taskSWITCH_DELAYED_LISTS() \
+{ \
+ List_t *pxTemp; \
+ \
+ /* The delayed tasks list should be empty when the lists are switched. */ \
+ configASSERT( ( listLIST_IS_EMPTY( pxDelayedTaskList ) ) ); \
+ \
+ pxTemp = pxDelayedTaskList; \
+ pxDelayedTaskList = pxOverflowDelayedTaskList; \
+ pxOverflowDelayedTaskList = pxTemp; \
+ xNumOfOverflows++; \
+ prvResetNextTaskUnblockTime(); \
+}
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Place the task represented by pxTCB into the appropriate ready list for
+ * the task. It is inserted at the end of the list.
+ */
+#define prvAddTaskToReadyList( pxTCB ) \
+ traceMOVED_TASK_TO_READY_STATE( pxTCB ); \
+ taskRECORD_READY_PRIORITY( ( pxTCB )->uxPriority ); \
+ vListInsertEnd( &( pxReadyTasksLists[ ( pxTCB )->uxPriority ] ), &( ( pxTCB )->xStateListItem ) ); \
+ tracePOST_MOVED_TASK_TO_READY_STATE( pxTCB )
+/*-----------------------------------------------------------*/
+
+/*
+ * Several functions take an TaskHandle_t parameter that can optionally be NULL,
+ * where NULL is used to indicate that the handle of the currently executing
+ * task should be used in place of the parameter. This macro simply checks to
+ * see if the parameter is NULL and returns a pointer to the appropriate TCB.
+ */
+#define prvGetTCBFromHandle( pxHandle ) ( ( ( pxHandle ) == NULL ) ? ( TCB_t * ) pxCurrentTCB : ( TCB_t * ) ( pxHandle ) )
+
+/* The item value of the event list item is normally used to hold the priority
+of the task to which it belongs (coded to allow it to be held in reverse
+priority order). However, it is occasionally borrowed for other purposes. It
+is important its value is not updated due to a task priority change while it is
+being used for another purpose. The following bit definition is used to inform
+the scheduler that the value should not be changed - in which case it is the
+responsibility of whichever module is using the value to ensure it gets set back
+to its original value when it is released. */
+#if( configUSE_16_BIT_TICKS == 1 )
+ #define taskEVENT_LIST_ITEM_VALUE_IN_USE 0x8000U
+#else
+ #define taskEVENT_LIST_ITEM_VALUE_IN_USE 0x80000000UL
+#endif
+
+/*
+ * Task control block. A task control block (TCB) is allocated for each task,
+ * and stores task state information, including a pointer to the task's context
+ * (the task's run time environment, including register values)
+ */
+typedef struct tskTaskControlBlock
+{
+ volatile StackType_t *pxTopOfStack; /*< Points to the location of the last item placed on the tasks stack. THIS MUST BE THE FIRST MEMBER OF THE TCB STRUCT. */
+
+ #if ( portUSING_MPU_WRAPPERS == 1 )
+ xMPU_SETTINGS xMPUSettings; /*< The MPU settings are defined as part of the port layer. THIS MUST BE THE SECOND MEMBER OF THE TCB STRUCT. */
+ #endif
+
+ ListItem_t xStateListItem; /*< The list that the state list item of a task is reference from denotes the state of that task (Ready, Blocked, Suspended ). */
+ ListItem_t xEventListItem; /*< Used to reference a task from an event list. */
+ UBaseType_t uxPriority; /*< The priority of the task. 0 is the lowest priority. */
+ StackType_t *pxStack; /*< Points to the start of the stack. */
+ char pcTaskName[ configMAX_TASK_NAME_LEN ];/*< Descriptive name given to the task when created. Facilitates debugging only. */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+ #if ( portSTACK_GROWTH > 0 )
+ StackType_t *pxEndOfStack; /*< Points to the end of the stack on architectures where the stack grows up from low memory. */
+ #endif
+
+ #if ( portCRITICAL_NESTING_IN_TCB == 1 )
+ UBaseType_t uxCriticalNesting; /*< Holds the critical section nesting depth for ports that do not maintain their own count in the port layer. */
+ #endif
+
+ #if ( configUSE_TRACE_FACILITY == 1 )
+ UBaseType_t uxTCBNumber; /*< Stores a number that increments each time a TCB is created. It allows debuggers to determine when a task has been deleted and then recreated. */
+ UBaseType_t uxTaskNumber; /*< Stores a number specifically for use by third party trace code. */
+ #endif
+
+ #if ( configUSE_MUTEXES == 1 )
+ UBaseType_t uxBasePriority; /*< The priority last assigned to the task - used by the priority inheritance mechanism. */
+ UBaseType_t uxMutexesHeld;
+ #endif
+
+ #if ( configUSE_APPLICATION_TASK_TAG == 1 )
+ TaskHookFunction_t pxTaskTag;
+ #endif
+
+ #if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 )
+ void *pvThreadLocalStoragePointers[ configNUM_THREAD_LOCAL_STORAGE_POINTERS ];
+ #endif
+
+ #if( configGENERATE_RUN_TIME_STATS == 1 )
+ uint32_t ulRunTimeCounter; /*< Stores the amount of time the task has spent in the Running state. */
+ #endif
+
+ #if ( configUSE_NEWLIB_REENTRANT == 1 )
+ /* Allocate a Newlib reent structure that is specific to this task.
+ Note Newlib support has been included by popular demand, but is not
+ used by the FreeRTOS maintainers themselves. FreeRTOS is not
+ responsible for resulting newlib operation. User must be familiar with
+ newlib and must provide system-wide implementations of the necessary
+ stubs. Be warned that (at the time of writing) the current newlib design
+ implements a system-wide malloc() that must be provided with locks. */
+ struct _reent xNewLib_reent;
+ #endif
+
+ #if( configUSE_TASK_NOTIFICATIONS == 1 )
+ volatile uint32_t ulNotifiedValue;
+ volatile uint8_t ucNotifyState;
+ #endif
+
+ /* See the comments above the definition of
+ tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE. */
+ #if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )
+ uint8_t ucStaticallyAllocated; /*< Set to pdTRUE if the task is a statically allocated to ensure no attempt is made to free the memory. */
+ #endif
+
+ #if( INCLUDE_xTaskAbortDelay == 1 )
+ uint8_t ucDelayAborted;
+ #endif
+
+} tskTCB;
+
+/* The old tskTCB name is maintained above then typedefed to the new TCB_t name
+below to enable the use of older kernel aware debuggers. */
+typedef tskTCB TCB_t;
+
+/*lint -e956 A manual analysis and inspection has been used to determine which
+static variables must be declared volatile. */
+
+PRIVILEGED_DATA TCB_t * volatile pxCurrentTCB = NULL;
+
+/* Lists for ready and blocked tasks. --------------------*/
+PRIVILEGED_DATA static List_t pxReadyTasksLists[ configMAX_PRIORITIES ];/*< Prioritised ready tasks. */
+PRIVILEGED_DATA static List_t xDelayedTaskList1; /*< Delayed tasks. */
+PRIVILEGED_DATA static List_t xDelayedTaskList2; /*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */
+PRIVILEGED_DATA static List_t * volatile pxDelayedTaskList; /*< Points to the delayed task list currently being used. */
+PRIVILEGED_DATA static List_t * volatile pxOverflowDelayedTaskList; /*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */
+PRIVILEGED_DATA static List_t xPendingReadyList; /*< Tasks that have been readied while the scheduler was suspended. They will be moved to the ready list when the scheduler is resumed. */
+
+#if( INCLUDE_vTaskDelete == 1 )
+
+ PRIVILEGED_DATA static List_t xTasksWaitingTermination; /*< Tasks that have been deleted - but their memory not yet freed. */
+ PRIVILEGED_DATA static volatile UBaseType_t uxDeletedTasksWaitingCleanUp = ( UBaseType_t ) 0U;
+
+#endif
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+ PRIVILEGED_DATA static List_t xSuspendedTaskList; /*< Tasks that are currently suspended. */
+
+#endif
+
+/* Other file private variables. --------------------------------*/
+PRIVILEGED_DATA static volatile UBaseType_t uxCurrentNumberOfTasks = ( UBaseType_t ) 0U;
+PRIVILEGED_DATA static volatile TickType_t xTickCount = ( TickType_t ) 0U;
+PRIVILEGED_DATA static volatile UBaseType_t uxTopReadyPriority = tskIDLE_PRIORITY;
+PRIVILEGED_DATA static volatile BaseType_t xSchedulerRunning = pdFALSE;
+PRIVILEGED_DATA static volatile UBaseType_t uxPendedTicks = ( UBaseType_t ) 0U;
+PRIVILEGED_DATA static volatile BaseType_t xYieldPending = pdFALSE;
+PRIVILEGED_DATA static volatile BaseType_t xNumOfOverflows = ( BaseType_t ) 0;
+PRIVILEGED_DATA static UBaseType_t uxTaskNumber = ( UBaseType_t ) 0U;
+PRIVILEGED_DATA static volatile TickType_t xNextTaskUnblockTime = ( TickType_t ) 0U; /* Initialised to portMAX_DELAY before the scheduler starts. */
+PRIVILEGED_DATA static TaskHandle_t xIdleTaskHandle = NULL; /*< Holds the handle of the idle task. The idle task is created automatically when the scheduler is started. */
+
+/* Context switches are held pending while the scheduler is suspended. Also,
+interrupts must not manipulate the xStateListItem of a TCB, or any of the
+lists the xStateListItem can be referenced from, if the scheduler is suspended.
+If an interrupt needs to unblock a task while the scheduler is suspended then it
+moves the task's event list item into the xPendingReadyList, ready for the
+kernel to move the task from the pending ready list into the real ready list
+when the scheduler is unsuspended. The pending ready list itself can only be
+accessed from a critical section. */
+PRIVILEGED_DATA static volatile UBaseType_t uxSchedulerSuspended = ( UBaseType_t ) pdFALSE;
+
+#if ( configGENERATE_RUN_TIME_STATS == 1 )
+
+ PRIVILEGED_DATA static uint32_t ulTaskSwitchedInTime = 0UL; /*< Holds the value of a timer/counter the last time a task was switched in. */
+ PRIVILEGED_DATA static uint32_t ulTotalRunTime = 0UL; /*< Holds the total amount of execution time as defined by the run time counter clock. */
+
+#endif
+
+/*lint +e956 */
+
+/*-----------------------------------------------------------*/
+
+/* Callback function prototypes. --------------------------*/
+#if( configCHECK_FOR_STACK_OVERFLOW > 0 )
+ extern void vApplicationStackOverflowHook( TaskHandle_t xTask, char *pcTaskName );
+#endif
+
+#if( configUSE_TICK_HOOK > 0 )
+ extern void vApplicationTickHook( void );
+#endif
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ extern void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize );
+#endif
+
+/* File private functions. --------------------------------*/
+
+/**
+ * Utility task that simply returns pdTRUE if the task referenced by xTask is
+ * currently in the Suspended state, or pdFALSE if the task referenced by xTask
+ * is in any other state.
+ */
+#if ( INCLUDE_vTaskSuspend == 1 )
+ static BaseType_t prvTaskIsTaskSuspended( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+#endif /* INCLUDE_vTaskSuspend */
+
+/*
+ * Utility to ready all the lists used by the scheduler. This is called
+ * automatically upon the creation of the first task.
+ */
+static void prvInitialiseTaskLists( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The idle task, which as all tasks is implemented as a never ending loop.
+ * The idle task is automatically created and added to the ready lists upon
+ * creation of the first user task.
+ *
+ * The portTASK_FUNCTION_PROTO() macro is used to allow port/compiler specific
+ * language extensions. The equivalent prototype for this function is:
+ *
+ * void prvIdleTask( void *pvParameters );
+ *
+ */
+static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );
+
+/*
+ * Utility to free all memory allocated by the scheduler to hold a TCB,
+ * including the stack pointed to by the TCB.
+ *
+ * This does not free memory allocated by the task itself (i.e. memory
+ * allocated by calls to pvPortMalloc from within the tasks application code).
+ */
+#if ( INCLUDE_vTaskDelete == 1 )
+
+ static void prvDeleteTCB( TCB_t *pxTCB ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Used only by the idle task. This checks to see if anything has been placed
+ * in the list of tasks waiting to be deleted. If so the task is cleaned up
+ * and its TCB deleted.
+ */
+static void prvCheckTasksWaitingTermination( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The currently executing task is entering the Blocked state. Add the task to
+ * either the current or the overflow delayed task list.
+ */
+static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely ) PRIVILEGED_FUNCTION;
+
+/*
+ * Fills an TaskStatus_t structure with information on each task that is
+ * referenced from the pxList list (which may be a ready list, a delayed list,
+ * a suspended list, etc.).
+ *
+ * THIS FUNCTION IS INTENDED FOR DEBUGGING ONLY, AND SHOULD NOT BE CALLED FROM
+ * NORMAL APPLICATION CODE.
+ */
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ static UBaseType_t prvListTasksWithinSingleList( TaskStatus_t *pxTaskStatusArray, List_t *pxList, eTaskState eState ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Searches pxList for a task with name pcNameToQuery - returning a handle to
+ * the task if it is found, or NULL if the task is not found.
+ */
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+ static TCB_t *prvSearchForNameWithinSingleList( List_t *pxList, const char pcNameToQuery[] ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * When a task is created, the stack of the task is filled with a known value.
+ * This function determines the 'high water mark' of the task stack by
+ * determining how much of the stack remains at the original preset value.
+ */
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )
+
+ static uint16_t prvTaskCheckFreeStackSpace( const uint8_t * pucStackByte ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Return the amount of time, in ticks, that will pass before the kernel will
+ * next move a task from the Blocked state to the Running state.
+ *
+ * This conditional compilation should use inequality to 0, not equality to 1.
+ * This is to ensure portSUPPRESS_TICKS_AND_SLEEP() can be called when user
+ * defined low power mode implementations require configUSE_TICKLESS_IDLE to be
+ * set to a value other than 1.
+ */
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+ static TickType_t prvGetExpectedIdleTime( void ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Set xNextTaskUnblockTime to the time at which the next Blocked state task
+ * will exit the Blocked state.
+ */
+static void prvResetNextTaskUnblockTime( void );
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+ /*
+ * Helper function used to pad task names with spaces when printing out
+ * human readable tables of task information.
+ */
+ static char *prvWriteNameToBuffer( char *pcBuffer, const char *pcTaskName ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Called after a Task_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewTask( TaskFunction_t pxTaskCode,
+ const char * const pcName,
+ const uint32_t ulStackDepth,
+ void * const pvParameters,
+ UBaseType_t uxPriority,
+ TaskHandle_t * const pxCreatedTask,
+ TCB_t *pxNewTCB,
+ const MemoryRegion_t * const xRegions ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/*
+ * Called after a new task has been created and initialised to place the task
+ * under the control of the scheduler.
+ */
+static void prvAddNewTaskToReadyList( TCB_t *pxNewTCB ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+ TaskHandle_t xTaskCreateStatic( TaskFunction_t pxTaskCode,
+ const char * const pcName,
+ const uint32_t ulStackDepth,
+ void * const pvParameters,
+ UBaseType_t uxPriority,
+ StackType_t * const puxStackBuffer,
+ StaticTask_t * const pxTaskBuffer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ {
+ TCB_t *pxNewTCB;
+ TaskHandle_t xReturn;
+
+ configASSERT( puxStackBuffer != NULL );
+ configASSERT( pxTaskBuffer != NULL );
+
+ if( ( pxTaskBuffer != NULL ) && ( puxStackBuffer != NULL ) )
+ {
+ /* The memory used for the task's TCB and stack are passed into this
+ function - use them. */
+ pxNewTCB = ( TCB_t * ) pxTaskBuffer; /*lint !e740 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */
+ pxNewTCB->pxStack = ( StackType_t * ) puxStackBuffer;
+
+ #if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )
+ {
+ /* Tasks can be created statically or dynamically, so note this
+ task was created statically in case the task is later deleted. */
+ pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_AND_TCB;
+ }
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+
+ prvInitialiseNewTask( pxTaskCode, pcName, ulStackDepth, pvParameters, uxPriority, &xReturn, pxNewTCB, NULL );
+ prvAddNewTaskToReadyList( pxNewTCB );
+ }
+ else
+ {
+ xReturn = NULL;
+ }
+
+ return xReturn;
+ }
+
+#endif /* SUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( portUSING_MPU_WRAPPERS == 1 )
+
+ BaseType_t xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask )
+ {
+ TCB_t *pxNewTCB;
+ BaseType_t xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
+
+ configASSERT( pxTaskDefinition->puxStackBuffer );
+
+ if( pxTaskDefinition->puxStackBuffer != NULL )
+ {
+ /* Allocate space for the TCB. Where the memory comes from depends
+ on the implementation of the port malloc function and whether or
+ not static allocation is being used. */
+ pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) );
+
+ if( pxNewTCB != NULL )
+ {
+ /* Store the stack location in the TCB. */
+ pxNewTCB->pxStack = pxTaskDefinition->puxStackBuffer;
+
+ /* Tasks can be created statically or dynamically, so note
+ this task had a statically allocated stack in case it is
+ later deleted. The TCB was allocated dynamically. */
+ pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_ONLY;
+
+ prvInitialiseNewTask( pxTaskDefinition->pvTaskCode,
+ pxTaskDefinition->pcName,
+ ( uint32_t ) pxTaskDefinition->usStackDepth,
+ pxTaskDefinition->pvParameters,
+ pxTaskDefinition->uxPriority,
+ pxCreatedTask, pxNewTCB,
+ pxTaskDefinition->xRegions );
+
+ prvAddNewTaskToReadyList( pxNewTCB );
+ xReturn = pdPASS;
+ }
+ }
+
+ return xReturn;
+ }
+
+#endif /* portUSING_MPU_WRAPPERS */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+ BaseType_t xTaskCreate( TaskFunction_t pxTaskCode,
+ const char * const pcName,
+ const uint16_t usStackDepth,
+ void * const pvParameters,
+ UBaseType_t uxPriority,
+ TaskHandle_t * const pxCreatedTask ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ {
+ TCB_t *pxNewTCB;
+ BaseType_t xReturn;
+
+ /* If the stack grows down then allocate the stack then the TCB so the stack
+ does not grow into the TCB. Likewise if the stack grows up then allocate
+ the TCB then the stack. */
+ #if( portSTACK_GROWTH > 0 )
+ {
+ /* Allocate space for the TCB. Where the memory comes from depends on
+ the implementation of the port malloc function and whether or not static
+ allocation is being used. */
+ pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) );
+
+ if( pxNewTCB != NULL )
+ {
+ /* Allocate space for the stack used by the task being created.
+ The base of the stack memory stored in the TCB so the task can
+ be deleted later if required. */
+ pxNewTCB->pxStack = ( StackType_t * ) pvPortMalloc( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+ if( pxNewTCB->pxStack == NULL )
+ {
+ /* Could not allocate the stack. Delete the allocated TCB. */
+ vPortFree( pxNewTCB );
+ pxNewTCB = NULL;
+ }
+ }
+ }
+ #else /* portSTACK_GROWTH */
+ {
+ StackType_t *pxStack;
+
+ /* Allocate space for the stack used by the task being created. */
+ pxStack = ( StackType_t * ) pvPortMalloc( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+ if( pxStack != NULL )
+ {
+ /* Allocate space for the TCB. */
+ pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) ); /*lint !e961 MISRA exception as the casts are only redundant for some paths. */
+
+ if( pxNewTCB != NULL )
+ {
+ /* Store the stack location in the TCB. */
+ pxNewTCB->pxStack = pxStack;
+ }
+ else
+ {
+ /* The stack cannot be used as the TCB was not created. Free
+ it again. */
+ vPortFree( pxStack );
+ }
+ }
+ else
+ {
+ pxNewTCB = NULL;
+ }
+ }
+ #endif /* portSTACK_GROWTH */
+
+ if( pxNewTCB != NULL )
+ {
+ #if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )
+ {
+ /* Tasks can be created statically or dynamically, so note this
+ task was created dynamically in case it is later deleted. */
+ pxNewTCB->ucStaticallyAllocated = tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB;
+ }
+ #endif /* configSUPPORT_STATIC_ALLOCATION */
+
+ prvInitialiseNewTask( pxTaskCode, pcName, ( uint32_t ) usStackDepth, pvParameters, uxPriority, pxCreatedTask, pxNewTCB, NULL );
+ prvAddNewTaskToReadyList( pxNewTCB );
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
+ }
+
+ return xReturn;
+ }
+
+#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewTask( TaskFunction_t pxTaskCode,
+ const char * const pcName,
+ const uint32_t ulStackDepth,
+ void * const pvParameters,
+ UBaseType_t uxPriority,
+ TaskHandle_t * const pxCreatedTask,
+ TCB_t *pxNewTCB,
+ const MemoryRegion_t * const xRegions ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+StackType_t *pxTopOfStack;
+UBaseType_t x;
+
+ #if( portUSING_MPU_WRAPPERS == 1 )
+ /* Should the task be created in privileged mode? */
+ BaseType_t xRunPrivileged;
+ if( ( uxPriority & portPRIVILEGE_BIT ) != 0U )
+ {
+ xRunPrivileged = pdTRUE;
+ }
+ else
+ {
+ xRunPrivileged = pdFALSE;
+ }
+ uxPriority &= ~portPRIVILEGE_BIT;
+ #endif /* portUSING_MPU_WRAPPERS == 1 */
+
+ /* Avoid dependency on memset() if it is not required. */
+ #if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )
+ {
+ /* Fill the stack with a known value to assist debugging. */
+ ( void ) memset( pxNewTCB->pxStack, ( int ) tskSTACK_FILL_BYTE, ( size_t ) ulStackDepth * sizeof( StackType_t ) );
+ }
+ #endif /* ( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) ) ) */
+
+ /* Calculate the top of stack address. This depends on whether the stack
+ grows from high memory to low (as per the 80x86) or vice versa.
+ portSTACK_GROWTH is used to make the result positive or negative as required
+ by the port. */
+ #if( portSTACK_GROWTH < 0 )
+ {
+ pxTopOfStack = pxNewTCB->pxStack + ( ulStackDepth - ( uint32_t ) 1 );
+ pxTopOfStack = ( StackType_t * ) ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack ) & ( ~( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) ) ); /*lint !e923 MISRA exception. Avoiding casts between pointers and integers is not practical. Size differences accounted for using portPOINTER_SIZE_TYPE type. */
+
+ /* Check the alignment of the calculated top of stack is correct. */
+ configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );
+ }
+ #else /* portSTACK_GROWTH */
+ {
+ pxTopOfStack = pxNewTCB->pxStack;
+
+ /* Check the alignment of the stack buffer is correct. */
+ configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxNewTCB->pxStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );
+
+ /* The other extreme of the stack space is required if stack checking is
+ performed. */
+ pxNewTCB->pxEndOfStack = pxNewTCB->pxStack + ( ulStackDepth - ( uint32_t ) 1 );
+ }
+ #endif /* portSTACK_GROWTH */
+
+ /* Store the task name in the TCB. */
+ for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )
+ {
+ pxNewTCB->pcTaskName[ x ] = pcName[ x ];
+
+ /* Don't copy all configMAX_TASK_NAME_LEN if the string is shorter than
+ configMAX_TASK_NAME_LEN characters just in case the memory after the
+ string is not accessible (extremely unlikely). */
+ if( pcName[ x ] == 0x00 )
+ {
+ break;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ /* Ensure the name string is terminated in the case that the string length
+ was greater or equal to configMAX_TASK_NAME_LEN. */
+ pxNewTCB->pcTaskName[ configMAX_TASK_NAME_LEN - 1 ] = '\0';
+
+ /* This is used as an array index so must ensure it's not too large. First
+ remove the privilege bit if one is present. */
+ if( uxPriority >= ( UBaseType_t ) configMAX_PRIORITIES )
+ {
+ uxPriority = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) 1U;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ pxNewTCB->uxPriority = uxPriority;
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ pxNewTCB->uxBasePriority = uxPriority;
+ pxNewTCB->uxMutexesHeld = 0;
+ }
+ #endif /* configUSE_MUTEXES */
+
+ vListInitialiseItem( &( pxNewTCB->xStateListItem ) );
+ vListInitialiseItem( &( pxNewTCB->xEventListItem ) );
+
+ /* Set the pxNewTCB as a link back from the ListItem_t. This is so we can get
+ back to the containing TCB from a generic item in a list. */
+ listSET_LIST_ITEM_OWNER( &( pxNewTCB->xStateListItem ), pxNewTCB );
+
+ /* Event lists are always in priority order. */
+ listSET_LIST_ITEM_VALUE( &( pxNewTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+ listSET_LIST_ITEM_OWNER( &( pxNewTCB->xEventListItem ), pxNewTCB );
+
+ #if ( portCRITICAL_NESTING_IN_TCB == 1 )
+ {
+ pxNewTCB->uxCriticalNesting = ( UBaseType_t ) 0U;
+ }
+ #endif /* portCRITICAL_NESTING_IN_TCB */
+
+ #if ( configUSE_APPLICATION_TASK_TAG == 1 )
+ {
+ pxNewTCB->pxTaskTag = NULL;
+ }
+ #endif /* configUSE_APPLICATION_TASK_TAG */
+
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )
+ {
+ pxNewTCB->ulRunTimeCounter = 0UL;
+ }
+ #endif /* configGENERATE_RUN_TIME_STATS */
+
+ #if ( portUSING_MPU_WRAPPERS == 1 )
+ {
+ vPortStoreTaskMPUSettings( &( pxNewTCB->xMPUSettings ), xRegions, pxNewTCB->pxStack, ulStackDepth );
+ }
+ #else
+ {
+ /* Avoid compiler warning about unreferenced parameter. */
+ ( void ) xRegions;
+ }
+ #endif
+
+ #if( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+ {
+ for( x = 0; x < ( UBaseType_t ) configNUM_THREAD_LOCAL_STORAGE_POINTERS; x++ )
+ {
+ pxNewTCB->pvThreadLocalStoragePointers[ x ] = NULL;
+ }
+ }
+ #endif
+
+ #if ( configUSE_TASK_NOTIFICATIONS == 1 )
+ {
+ pxNewTCB->ulNotifiedValue = 0;
+ pxNewTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+ }
+ #endif
+
+ #if ( configUSE_NEWLIB_REENTRANT == 1 )
+ {
+ /* Initialise this task's Newlib reent structure. */
+ _REENT_INIT_PTR( ( &( pxNewTCB->xNewLib_reent ) ) );
+ }
+ #endif
+
+ #if( INCLUDE_xTaskAbortDelay == 1 )
+ {
+ pxNewTCB->ucDelayAborted = pdFALSE;
+ }
+ #endif
+
+ /* Initialize the TCB stack to look as if the task was already running,
+ but had been interrupted by the scheduler. The return address is set
+ to the start of the task function. Once the stack has been initialised
+ the top of stack variable is updated. */
+ #if( portUSING_MPU_WRAPPERS == 1 )
+ {
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );
+ }
+ #else /* portUSING_MPU_WRAPPERS */
+ {
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );
+ }
+ #endif /* portUSING_MPU_WRAPPERS */
+
+ if( ( void * ) pxCreatedTask != NULL )
+ {
+ /* Pass the handle out in an anonymous way. The handle can be used to
+ change the created task's priority, delete the created task, etc.*/
+ *pxCreatedTask = ( TaskHandle_t ) pxNewTCB;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvAddNewTaskToReadyList( TCB_t *pxNewTCB )
+{
+ /* Ensure interrupts don't access the task lists while the lists are being
+ updated. */
+ taskENTER_CRITICAL();
+ {
+ uxCurrentNumberOfTasks++;
+ if( pxCurrentTCB == NULL )
+ {
+ /* There are no other tasks, or all the other tasks are in
+ the suspended state - make this the current task. */
+ pxCurrentTCB = pxNewTCB;
+
+ if( uxCurrentNumberOfTasks == ( UBaseType_t ) 1 )
+ {
+ /* This is the first task to be created so do the preliminary
+ initialisation required. We will not recover if this call
+ fails, but we will report the failure. */
+ prvInitialiseTaskLists();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ /* If the scheduler is not already running, make this task the
+ current task if it is the highest priority task to be created
+ so far. */
+ if( xSchedulerRunning == pdFALSE )
+ {
+ if( pxCurrentTCB->uxPriority <= pxNewTCB->uxPriority )
+ {
+ pxCurrentTCB = pxNewTCB;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ uxTaskNumber++;
+
+ #if ( configUSE_TRACE_FACILITY == 1 )
+ {
+ /* Add a counter into the TCB for tracing only. */
+ pxNewTCB->uxTCBNumber = uxTaskNumber;
+ }
+ #endif /* configUSE_TRACE_FACILITY */
+ traceTASK_CREATE( pxNewTCB );
+
+ prvAddTaskToReadyList( pxNewTCB );
+
+ portSETUP_TCB( pxNewTCB );
+ }
+ taskEXIT_CRITICAL();
+
+ if( xSchedulerRunning != pdFALSE )
+ {
+ /* If the created task is of a higher priority than the current task
+ then it should run now. */
+ if( pxCurrentTCB->uxPriority < pxNewTCB->uxPriority )
+ {
+ taskYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+}
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelete == 1 )
+
+ void vTaskDelete( TaskHandle_t xTaskToDelete )
+ {
+ TCB_t *pxTCB;
+
+ taskENTER_CRITICAL();
+ {
+ /* If null is passed in here then it is the calling task that is
+ being deleted. */
+ pxTCB = prvGetTCBFromHandle( xTaskToDelete );
+
+ /* Remove task from the ready list. */
+ if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+ {
+ taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Is the task waiting on an event also? */
+ if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+ {
+ ( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Increment the uxTaskNumber also so kernel aware debuggers can
+ detect that the task lists need re-generating. This is done before
+ portPRE_TASK_DELETE_HOOK() as in the Windows port that macro will
+ not return. */
+ uxTaskNumber++;
+
+ if( pxTCB == pxCurrentTCB )
+ {
+ /* A task is deleting itself. This cannot complete within the
+ task itself, as a context switch to another task is required.
+ Place the task in the termination list. The idle task will
+ check the termination list and free up any memory allocated by
+ the scheduler for the TCB and stack of the deleted task. */
+ vListInsertEnd( &xTasksWaitingTermination, &( pxTCB->xStateListItem ) );
+
+ /* Increment the ucTasksDeleted variable so the idle task knows
+ there is a task that has been deleted and that it should therefore
+ check the xTasksWaitingTermination list. */
+ ++uxDeletedTasksWaitingCleanUp;
+
+ /* The pre-delete hook is primarily for the Windows simulator,
+ in which Windows specific clean up operations are performed,
+ after which it is not possible to yield away from this task -
+ hence xYieldPending is used to latch that a context switch is
+ required. */
+ portPRE_TASK_DELETE_HOOK( pxTCB, &xYieldPending );
+ }
+ else
+ {
+ --uxCurrentNumberOfTasks;
+ prvDeleteTCB( pxTCB );
+
+ /* Reset the next expected unblock time in case it referred to
+ the task that has just been deleted. */
+ prvResetNextTaskUnblockTime();
+ }
+
+ traceTASK_DELETE( pxTCB );
+ }
+ taskEXIT_CRITICAL();
+
+ /* Force a reschedule if it is the currently running task that has just
+ been deleted. */
+ if( xSchedulerRunning != pdFALSE )
+ {
+ if( pxTCB == pxCurrentTCB )
+ {
+ configASSERT( uxSchedulerSuspended == 0 );
+ portYIELD_WITHIN_API();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+
+#endif /* INCLUDE_vTaskDelete */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelayUntil == 1 )
+
+ void vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement )
+ {
+ TickType_t xTimeToWake;
+ BaseType_t xAlreadyYielded, xShouldDelay = pdFALSE;
+
+ configASSERT( pxPreviousWakeTime );
+ configASSERT( ( xTimeIncrement > 0U ) );
+ configASSERT( uxSchedulerSuspended == 0 );
+
+ vTaskSuspendAll();
+ {
+ /* Minor optimisation. The tick count cannot change in this
+ block. */
+ const TickType_t xConstTickCount = xTickCount;
+
+ /* Generate the tick time at which the task wants to wake. */
+ xTimeToWake = *pxPreviousWakeTime + xTimeIncrement;
+
+ if( xConstTickCount < *pxPreviousWakeTime )
+ {
+ /* The tick count has overflowed since this function was
+ lasted called. In this case the only time we should ever
+ actually delay is if the wake time has also overflowed,
+ and the wake time is greater than the tick time. When this
+ is the case it is as if neither time had overflowed. */
+ if( ( xTimeToWake < *pxPreviousWakeTime ) && ( xTimeToWake > xConstTickCount ) )
+ {
+ xShouldDelay = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ /* The tick time has not overflowed. In this case we will
+ delay if either the wake time has overflowed, and/or the
+ tick time is less than the wake time. */
+ if( ( xTimeToWake < *pxPreviousWakeTime ) || ( xTimeToWake > xConstTickCount ) )
+ {
+ xShouldDelay = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ /* Update the wake time ready for the next call. */
+ *pxPreviousWakeTime = xTimeToWake;
+
+ if( xShouldDelay != pdFALSE )
+ {
+ traceTASK_DELAY_UNTIL( xTimeToWake );
+
+ /* prvAddCurrentTaskToDelayedList() needs the block time, not
+ the time to wake, so subtract the current tick count. */
+ prvAddCurrentTaskToDelayedList( xTimeToWake - xConstTickCount, pdFALSE );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ xAlreadyYielded = xTaskResumeAll();
+
+ /* Force a reschedule if xTaskResumeAll has not already done so, we may
+ have put ourselves to sleep. */
+ if( xAlreadyYielded == pdFALSE )
+ {
+ portYIELD_WITHIN_API();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* INCLUDE_vTaskDelayUntil */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelay == 1 )
+
+ void vTaskDelay( const TickType_t xTicksToDelay )
+ {
+ BaseType_t xAlreadyYielded = pdFALSE;
+
+ /* A delay time of zero just forces a reschedule. */
+ if( xTicksToDelay > ( TickType_t ) 0U )
+ {
+ configASSERT( uxSchedulerSuspended == 0 );
+ vTaskSuspendAll();
+ {
+ traceTASK_DELAY();
+
+ /* A task that is removed from the event list while the
+ scheduler is suspended will not get placed in the ready
+ list or removed from the blocked list until the scheduler
+ is resumed.
+
+ This task cannot be in an event list as it is the currently
+ executing task. */
+ prvAddCurrentTaskToDelayedList( xTicksToDelay, pdFALSE );
+ }
+ xAlreadyYielded = xTaskResumeAll();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Force a reschedule if xTaskResumeAll has not already done so, we may
+ have put ourselves to sleep. */
+ if( xAlreadyYielded == pdFALSE )
+ {
+ portYIELD_WITHIN_API();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* INCLUDE_vTaskDelay */
+/*-----------------------------------------------------------*/
+
+#if( ( INCLUDE_eTaskGetState == 1 ) || ( configUSE_TRACE_FACILITY == 1 ) )
+
+ eTaskState eTaskGetState( TaskHandle_t xTask )
+ {
+ eTaskState eReturn;
+ List_t *pxStateList;
+ const TCB_t * const pxTCB = ( TCB_t * ) xTask;
+
+ configASSERT( pxTCB );
+
+ if( pxTCB == pxCurrentTCB )
+ {
+ /* The task calling this function is querying its own state. */
+ eReturn = eRunning;
+ }
+ else
+ {
+ taskENTER_CRITICAL();
+ {
+ pxStateList = ( List_t * ) listLIST_ITEM_CONTAINER( &( pxTCB->xStateListItem ) );
+ }
+ taskEXIT_CRITICAL();
+
+ if( ( pxStateList == pxDelayedTaskList ) || ( pxStateList == pxOverflowDelayedTaskList ) )
+ {
+ /* The task being queried is referenced from one of the Blocked
+ lists. */
+ eReturn = eBlocked;
+ }
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ else if( pxStateList == &xSuspendedTaskList )
+ {
+ /* The task being queried is referenced from the suspended
+ list. Is it genuinely suspended or is it block
+ indefinitely? */
+ if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL )
+ {
+ eReturn = eSuspended;
+ }
+ else
+ {
+ eReturn = eBlocked;
+ }
+ }
+ #endif
+
+ #if ( INCLUDE_vTaskDelete == 1 )
+ else if( ( pxStateList == &xTasksWaitingTermination ) || ( pxStateList == NULL ) )
+ {
+ /* The task being queried is referenced from the deleted
+ tasks list, or it is not referenced from any lists at
+ all. */
+ eReturn = eDeleted;
+ }
+ #endif
+
+ else /*lint !e525 Negative indentation is intended to make use of pre-processor clearer. */
+ {
+ /* If the task is not in any other state, it must be in the
+ Ready (including pending ready) state. */
+ eReturn = eReady;
+ }
+ }
+
+ return eReturn;
+ } /*lint !e818 xTask cannot be a pointer to const because it is a typedef. */
+
+#endif /* INCLUDE_eTaskGetState */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskPriorityGet == 1 )
+
+ UBaseType_t uxTaskPriorityGet( TaskHandle_t xTask )
+ {
+ TCB_t *pxTCB;
+ UBaseType_t uxReturn;
+
+ taskENTER_CRITICAL();
+ {
+ /* If null is passed in here then it is the priority of the that
+ called uxTaskPriorityGet() that is being queried. */
+ pxTCB = prvGetTCBFromHandle( xTask );
+ uxReturn = pxTCB->uxPriority;
+ }
+ taskEXIT_CRITICAL();
+
+ return uxReturn;
+ }
+
+#endif /* INCLUDE_uxTaskPriorityGet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskPriorityGet == 1 )
+
+ UBaseType_t uxTaskPriorityGetFromISR( TaskHandle_t xTask )
+ {
+ TCB_t *pxTCB;
+ UBaseType_t uxReturn, uxSavedInterruptState;
+
+ /* RTOS ports that support interrupt nesting have the concept of a
+ maximum system call (or maximum API call) interrupt priority.
+ Interrupts that are above the maximum system call priority are keep
+ permanently enabled, even when the RTOS kernel is in a critical section,
+ but cannot make any calls to FreeRTOS API functions. If configASSERT()
+ is defined in FreeRTOSConfig.h then
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has
+ been assigned a priority above the configured maximum system call
+ priority. Only FreeRTOS functions that end in FromISR can be called
+ from interrupts that have been assigned a priority at or (logically)
+ below the maximum system call interrupt priority. FreeRTOS maintains a
+ separate interrupt safe API to ensure interrupt entry is as fast and as
+ simple as possible. More information (albeit Cortex-M specific) is
+ provided on the following link:
+ http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ uxSavedInterruptState = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ /* If null is passed in here then it is the priority of the calling
+ task that is being queried. */
+ pxTCB = prvGetTCBFromHandle( xTask );
+ uxReturn = pxTCB->uxPriority;
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptState );
+
+ return uxReturn;
+ }
+
+#endif /* INCLUDE_uxTaskPriorityGet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskPrioritySet == 1 )
+
+ void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority )
+ {
+ TCB_t *pxTCB;
+ UBaseType_t uxCurrentBasePriority, uxPriorityUsedOnEntry;
+ BaseType_t xYieldRequired = pdFALSE;
+
+ configASSERT( ( uxNewPriority < configMAX_PRIORITIES ) );
+
+ /* Ensure the new priority is valid. */
+ if( uxNewPriority >= ( UBaseType_t ) configMAX_PRIORITIES )
+ {
+ uxNewPriority = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) 1U;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ taskENTER_CRITICAL();
+ {
+ /* If null is passed in here then it is the priority of the calling
+ task that is being changed. */
+ pxTCB = prvGetTCBFromHandle( xTask );
+
+ traceTASK_PRIORITY_SET( pxTCB, uxNewPriority );
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ uxCurrentBasePriority = pxTCB->uxBasePriority;
+ }
+ #else
+ {
+ uxCurrentBasePriority = pxTCB->uxPriority;
+ }
+ #endif
+
+ if( uxCurrentBasePriority != uxNewPriority )
+ {
+ /* The priority change may have readied a task of higher
+ priority than the calling task. */
+ if( uxNewPriority > uxCurrentBasePriority )
+ {
+ if( pxTCB != pxCurrentTCB )
+ {
+ /* The priority of a task other than the currently
+ running task is being raised. Is the priority being
+ raised above that of the running task? */
+ if( uxNewPriority >= pxCurrentTCB->uxPriority )
+ {
+ xYieldRequired = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ /* The priority of the running task is being raised,
+ but the running task must already be the highest
+ priority task able to run so no yield is required. */
+ }
+ }
+ else if( pxTCB == pxCurrentTCB )
+ {
+ /* Setting the priority of the running task down means
+ there may now be another task of higher priority that
+ is ready to execute. */
+ xYieldRequired = pdTRUE;
+ }
+ else
+ {
+ /* Setting the priority of any other task down does not
+ require a yield as the running task must be above the
+ new priority of the task being modified. */
+ }
+
+ /* Remember the ready list the task might be referenced from
+ before its uxPriority member is changed so the
+ taskRESET_READY_PRIORITY() macro can function correctly. */
+ uxPriorityUsedOnEntry = pxTCB->uxPriority;
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ /* Only change the priority being used if the task is not
+ currently using an inherited priority. */
+ if( pxTCB->uxBasePriority == pxTCB->uxPriority )
+ {
+ pxTCB->uxPriority = uxNewPriority;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* The base priority gets set whatever. */
+ pxTCB->uxBasePriority = uxNewPriority;
+ }
+ #else
+ {
+ pxTCB->uxPriority = uxNewPriority;
+ }
+ #endif
+
+ /* Only reset the event list item value if the value is not
+ being used for anything else. */
+ if( ( listGET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )
+ {
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxNewPriority ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* If the task is in the blocked or suspended list we need do
+ nothing more than change it's priority variable. However, if
+ the task is in a ready list it needs to be removed and placed
+ in the list appropriate to its new priority. */
+ if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxPriorityUsedOnEntry ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )
+ {
+ /* The task is currently in its ready list - remove before adding
+ it to it's new ready list. As we are in a critical section we
+ can do this even if the scheduler is suspended. */
+ if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+ {
+ /* It is known that the task is in its ready list so
+ there is no need to check again and the port level
+ reset macro can be called directly. */
+ portRESET_READY_PRIORITY( uxPriorityUsedOnEntry, uxTopReadyPriority );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ prvAddTaskToReadyList( pxTCB );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ if( xYieldRequired != pdFALSE )
+ {
+ taskYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Remove compiler warning about unused variables when the port
+ optimised task selection is not being used. */
+ ( void ) uxPriorityUsedOnEntry;
+ }
+ }
+ taskEXIT_CRITICAL();
+ }
+
+#endif /* INCLUDE_vTaskPrioritySet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+ void vTaskSuspend( TaskHandle_t xTaskToSuspend )
+ {
+ TCB_t *pxTCB;
+
+ taskENTER_CRITICAL();
+ {
+ /* If null is passed in here then it is the running task that is
+ being suspended. */
+ pxTCB = prvGetTCBFromHandle( xTaskToSuspend );
+
+ traceTASK_SUSPEND( pxTCB );
+
+ /* Remove task from the ready/delayed list and place in the
+ suspended list. */
+ if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+ {
+ taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Is the task waiting on an event also? */
+ if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+ {
+ ( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ vListInsertEnd( &xSuspendedTaskList, &( pxTCB->xStateListItem ) );
+ }
+ taskEXIT_CRITICAL();
+
+ if( xSchedulerRunning != pdFALSE )
+ {
+ /* Reset the next expected unblock time in case it referred to the
+ task that is now in the Suspended state. */
+ taskENTER_CRITICAL();
+ {
+ prvResetNextTaskUnblockTime();
+ }
+ taskEXIT_CRITICAL();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ if( pxTCB == pxCurrentTCB )
+ {
+ if( xSchedulerRunning != pdFALSE )
+ {
+ /* The current task has just been suspended. */
+ configASSERT( uxSchedulerSuspended == 0 );
+ portYIELD_WITHIN_API();
+ }
+ else
+ {
+ /* The scheduler is not running, but the task that was pointed
+ to by pxCurrentTCB has just been suspended and pxCurrentTCB
+ must be adjusted to point to a different task. */
+ if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == uxCurrentNumberOfTasks )
+ {
+ /* No other tasks are ready, so set pxCurrentTCB back to
+ NULL so when the next task is created pxCurrentTCB will
+ be set to point to it no matter what its relative priority
+ is. */
+ pxCurrentTCB = NULL;
+ }
+ else
+ {
+ vTaskSwitchContext();
+ }
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* INCLUDE_vTaskSuspend */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+ static BaseType_t prvTaskIsTaskSuspended( const TaskHandle_t xTask )
+ {
+ BaseType_t xReturn = pdFALSE;
+ const TCB_t * const pxTCB = ( TCB_t * ) xTask;
+
+ /* Accesses xPendingReadyList so must be called from a critical
+ section. */
+
+ /* It does not make sense to check if the calling task is suspended. */
+ configASSERT( xTask );
+
+ /* Is the task being resumed actually in the suspended list? */
+ if( listIS_CONTAINED_WITHIN( &xSuspendedTaskList, &( pxTCB->xStateListItem ) ) != pdFALSE )
+ {
+ /* Has the task already been resumed from within an ISR? */
+ if( listIS_CONTAINED_WITHIN( &xPendingReadyList, &( pxTCB->xEventListItem ) ) == pdFALSE )
+ {
+ /* Is it in the suspended list because it is in the Suspended
+ state, or because is is blocked with no timeout? */
+ if( listIS_CONTAINED_WITHIN( NULL, &( pxTCB->xEventListItem ) ) != pdFALSE )
+ {
+ xReturn = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ return xReturn;
+ } /*lint !e818 xTask cannot be a pointer to const because it is a typedef. */
+
+#endif /* INCLUDE_vTaskSuspend */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+ void vTaskResume( TaskHandle_t xTaskToResume )
+ {
+ TCB_t * const pxTCB = ( TCB_t * ) xTaskToResume;
+
+ /* It does not make sense to resume the calling task. */
+ configASSERT( xTaskToResume );
+
+ /* The parameter cannot be NULL as it is impossible to resume the
+ currently executing task. */
+ if( ( pxTCB != NULL ) && ( pxTCB != pxCurrentTCB ) )
+ {
+ taskENTER_CRITICAL();
+ {
+ if( prvTaskIsTaskSuspended( pxTCB ) != pdFALSE )
+ {
+ traceTASK_RESUME( pxTCB );
+
+ /* As we are in a critical section we can access the ready
+ lists even if the scheduler is suspended. */
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+ prvAddTaskToReadyList( pxTCB );
+
+ /* We may have just resumed a higher priority task. */
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+ {
+ /* This yield may not cause the task just resumed to run,
+ but will leave the lists in the correct state for the
+ next yield. */
+ taskYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ taskEXIT_CRITICAL();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* INCLUDE_vTaskSuspend */
+
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) )
+
+ BaseType_t xTaskResumeFromISR( TaskHandle_t xTaskToResume )
+ {
+ BaseType_t xYieldRequired = pdFALSE;
+ TCB_t * const pxTCB = ( TCB_t * ) xTaskToResume;
+ UBaseType_t uxSavedInterruptStatus;
+
+ configASSERT( xTaskToResume );
+
+ /* RTOS ports that support interrupt nesting have the concept of a
+ maximum system call (or maximum API call) interrupt priority.
+ Interrupts that are above the maximum system call priority are keep
+ permanently enabled, even when the RTOS kernel is in a critical section,
+ but cannot make any calls to FreeRTOS API functions. If configASSERT()
+ is defined in FreeRTOSConfig.h then
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has
+ been assigned a priority above the configured maximum system call
+ priority. Only FreeRTOS functions that end in FromISR can be called
+ from interrupts that have been assigned a priority at or (logically)
+ below the maximum system call interrupt priority. FreeRTOS maintains a
+ separate interrupt safe API to ensure interrupt entry is as fast and as
+ simple as possible. More information (albeit Cortex-M specific) is
+ provided on the following link:
+ http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ if( prvTaskIsTaskSuspended( pxTCB ) != pdFALSE )
+ {
+ traceTASK_RESUME_FROM_ISR( pxTCB );
+
+ /* Check the ready lists can be accessed. */
+ if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+ {
+ /* Ready lists can be accessed so move the task from the
+ suspended list to the ready list directly. */
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+ {
+ xYieldRequired = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+ prvAddTaskToReadyList( pxTCB );
+ }
+ else
+ {
+ /* The delayed or ready lists cannot be accessed so the task
+ is held in the pending ready list until the scheduler is
+ unsuspended. */
+ vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xYieldRequired;
+ }
+
+#endif /* ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+void vTaskStartScheduler( void )
+{
+BaseType_t xReturn;
+
+ /* Add the idle task at the lowest priority. */
+ #if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ {
+ StaticTask_t *pxIdleTaskTCBBuffer = NULL;
+ StackType_t *pxIdleTaskStackBuffer = NULL;
+ uint32_t ulIdleTaskStackSize;
+
+ /* The Idle task is created using user provided RAM - obtain the
+ address of the RAM then create the idle task. */
+ vApplicationGetIdleTaskMemory( &pxIdleTaskTCBBuffer, &pxIdleTaskStackBuffer, &ulIdleTaskStackSize );
+ xIdleTaskHandle = xTaskCreateStatic( prvIdleTask,
+ "IDLE",
+ ulIdleTaskStackSize,
+ ( void * ) NULL,
+ ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ),
+ pxIdleTaskStackBuffer,
+ pxIdleTaskTCBBuffer ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */
+
+ if( xIdleTaskHandle != NULL )
+ {
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ }
+ }
+ #else
+ {
+ /* The Idle task is being created using dynamically allocated RAM. */
+ xReturn = xTaskCreate( prvIdleTask,
+ "IDLE", configMINIMAL_STACK_SIZE,
+ ( void * ) NULL,
+ ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ),
+ &xIdleTaskHandle ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */
+ }
+ #endif /* configSUPPORT_STATIC_ALLOCATION */
+
+ #if ( configUSE_TIMERS == 1 )
+ {
+ if( xReturn == pdPASS )
+ {
+ xReturn = xTimerCreateTimerTask();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_TIMERS */
+
+ if( xReturn == pdPASS )
+ {
+ /* Interrupts are turned off here, to ensure a tick does not occur
+ before or during the call to xPortStartScheduler(). The stacks of
+ the created tasks contain a status word with interrupts switched on
+ so interrupts will automatically get re-enabled when the first task
+ starts to run. */
+ portDISABLE_INTERRUPTS();
+
+ #if ( configUSE_NEWLIB_REENTRANT == 1 )
+ {
+ /* Switch Newlib's _impure_ptr variable to point to the _reent
+ structure specific to the task that will run first. */
+ _impure_ptr = &( pxCurrentTCB->xNewLib_reent );
+ }
+ #endif /* configUSE_NEWLIB_REENTRANT */
+
+ xNextTaskUnblockTime = portMAX_DELAY;
+ xSchedulerRunning = pdTRUE;
+ xTickCount = ( TickType_t ) 0U;
+
+ /* If configGENERATE_RUN_TIME_STATS is defined then the following
+ macro must be defined to configure the timer/counter used to generate
+ the run time counter time base. */
+ portCONFIGURE_TIMER_FOR_RUN_TIME_STATS();
+
+ /* Setting up the timer tick is hardware specific and thus in the
+ portable interface. */
+ if( xPortStartScheduler() != pdFALSE )
+ {
+ /* Should not reach here as if the scheduler is running the
+ function will not return. */
+ }
+ else
+ {
+ /* Should only reach here if a task calls xTaskEndScheduler(). */
+ }
+ }
+ else
+ {
+ /* This line will only be reached if the kernel could not be started,
+ because there was not enough FreeRTOS heap to create the idle task
+ or the timer task. */
+ configASSERT( xReturn != errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY );
+ }
+
+ /* Prevent compiler warnings if INCLUDE_xTaskGetIdleTaskHandle is set to 0,
+ meaning xIdleTaskHandle is not used anywhere else. */
+ ( void ) xIdleTaskHandle;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskEndScheduler( void )
+{
+ /* Stop the scheduler interrupts and call the portable scheduler end
+ routine so the original ISRs can be restored if necessary. The port
+ layer must ensure interrupts enable bit is left in the correct state. */
+ portDISABLE_INTERRUPTS();
+ xSchedulerRunning = pdFALSE;
+ vPortEndScheduler();
+}
+/*----------------------------------------------------------*/
+
+void vTaskSuspendAll( void )
+{
+ /* A critical section is not required as the variable is of type
+ BaseType_t. Please read Richard Barry's reply in the following link to a
+ post in the FreeRTOS support forum before reporting this as a bug! -
+ http://goo.gl/wu4acr */
+ ++uxSchedulerSuspended;
+}
+/*----------------------------------------------------------*/
+
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+ static TickType_t prvGetExpectedIdleTime( void )
+ {
+ TickType_t xReturn;
+ UBaseType_t uxHigherPriorityReadyTasks = pdFALSE;
+
+ /* uxHigherPriorityReadyTasks takes care of the case where
+ configUSE_PREEMPTION is 0, so there may be tasks above the idle priority
+ task that are in the Ready state, even though the idle task is
+ running. */
+ #if( configUSE_PORT_OPTIMISED_TASK_SELECTION == 0 )
+ {
+ if( uxTopReadyPriority > tskIDLE_PRIORITY )
+ {
+ uxHigherPriorityReadyTasks = pdTRUE;
+ }
+ }
+ #else
+ {
+ const UBaseType_t uxLeastSignificantBit = ( UBaseType_t ) 0x01;
+
+ /* When port optimised task selection is used the uxTopReadyPriority
+ variable is used as a bit map. If bits other than the least
+ significant bit are set then there are tasks that have a priority
+ above the idle priority that are in the Ready state. This takes
+ care of the case where the co-operative scheduler is in use. */
+ if( uxTopReadyPriority > uxLeastSignificantBit )
+ {
+ uxHigherPriorityReadyTasks = pdTRUE;
+ }
+ }
+ #endif
+
+ if( pxCurrentTCB->uxPriority > tskIDLE_PRIORITY )
+ {
+ xReturn = 0;
+ }
+ else if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > 1 )
+ {
+ /* There are other idle priority tasks in the ready state. If
+ time slicing is used then the very next tick interrupt must be
+ processed. */
+ xReturn = 0;
+ }
+ else if( uxHigherPriorityReadyTasks != pdFALSE )
+ {
+ /* There are tasks in the Ready state that have a priority above the
+ idle priority. This path can only be reached if
+ configUSE_PREEMPTION is 0. */
+ xReturn = 0;
+ }
+ else
+ {
+ xReturn = xNextTaskUnblockTime - xTickCount;
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*----------------------------------------------------------*/
+
+BaseType_t xTaskResumeAll( void )
+{
+TCB_t *pxTCB = NULL;
+BaseType_t xAlreadyYielded = pdFALSE;
+
+ /* If uxSchedulerSuspended is zero then this function does not match a
+ previous call to vTaskSuspendAll(). */
+ configASSERT( uxSchedulerSuspended );
+
+ /* It is possible that an ISR caused a task to be removed from an event
+ list while the scheduler was suspended. If this was the case then the
+ removed task will have been added to the xPendingReadyList. Once the
+ scheduler has been resumed it is safe to move all the pending ready
+ tasks from this list into their appropriate ready list. */
+ taskENTER_CRITICAL();
+ {
+ --uxSchedulerSuspended;
+
+ if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+ {
+ if( uxCurrentNumberOfTasks > ( UBaseType_t ) 0U )
+ {
+ /* Move any readied tasks from the pending list into the
+ appropriate ready list. */
+ while( listLIST_IS_EMPTY( &xPendingReadyList ) == pdFALSE )
+ {
+ pxTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( ( &xPendingReadyList ) );
+ ( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+ prvAddTaskToReadyList( pxTCB );
+
+ /* If the moved task has a priority higher than the current
+ task then a yield must be performed. */
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+ {
+ xYieldPending = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ if( pxTCB != NULL )
+ {
+ /* A task was unblocked while the scheduler was suspended,
+ which may have prevented the next unblock time from being
+ re-calculated, in which case re-calculate it now. Mainly
+ important for low power tickless implementations, where
+ this can prevent an unnecessary exit from low power
+ state. */
+ prvResetNextTaskUnblockTime();
+ }
+
+ /* If any ticks occurred while the scheduler was suspended then
+ they should be processed now. This ensures the tick count does
+ not slip, and that any delayed tasks are resumed at the correct
+ time. */
+ {
+ UBaseType_t uxPendedCounts = uxPendedTicks; /* Non-volatile copy. */
+
+ if( uxPendedCounts > ( UBaseType_t ) 0U )
+ {
+ do
+ {
+ if( xTaskIncrementTick() != pdFALSE )
+ {
+ xYieldPending = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ --uxPendedCounts;
+ } while( uxPendedCounts > ( UBaseType_t ) 0U );
+
+ uxPendedTicks = 0;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ if( xYieldPending != pdFALSE )
+ {
+ #if( configUSE_PREEMPTION != 0 )
+ {
+ xAlreadyYielded = pdTRUE;
+ }
+ #endif
+ taskYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ return xAlreadyYielded;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTaskGetTickCount( void )
+{
+TickType_t xTicks;
+
+ /* Critical section required if running on a 16 bit processor. */
+ portTICK_TYPE_ENTER_CRITICAL();
+ {
+ xTicks = xTickCount;
+ }
+ portTICK_TYPE_EXIT_CRITICAL();
+
+ return xTicks;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTaskGetTickCountFromISR( void )
+{
+TickType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+
+ /* RTOS ports that support interrupt nesting have the concept of a maximum
+ system call (or maximum API call) interrupt priority. Interrupts that are
+ above the maximum system call priority are kept permanently enabled, even
+ when the RTOS kernel is in a critical section, but cannot make any calls to
+ FreeRTOS API functions. If configASSERT() is defined in FreeRTOSConfig.h
+ then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has been
+ assigned a priority above the configured maximum system call priority.
+ Only FreeRTOS functions that end in FromISR can be called from interrupts
+ that have been assigned a priority at or (logically) below the maximum
+ system call interrupt priority. FreeRTOS maintains a separate interrupt
+ safe API to ensure interrupt entry is as fast and as simple as possible.
+ More information (albeit Cortex-M specific) is provided on the following
+ link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ uxSavedInterruptStatus = portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR();
+ {
+ xReturn = xTickCount;
+ }
+ portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxTaskGetNumberOfTasks( void )
+{
+ /* A critical section is not required because the variables are of type
+ BaseType_t. */
+ return uxCurrentNumberOfTasks;
+}
+/*-----------------------------------------------------------*/
+
+char *pcTaskGetName( TaskHandle_t xTaskToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+TCB_t *pxTCB;
+
+ /* If null is passed in here then the name of the calling task is being
+ queried. */
+ pxTCB = prvGetTCBFromHandle( xTaskToQuery );
+ configASSERT( pxTCB );
+ return &( pxTCB->pcTaskName[ 0 ] );
+}
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+ static TCB_t *prvSearchForNameWithinSingleList( List_t *pxList, const char pcNameToQuery[] )
+ {
+ TCB_t *pxNextTCB, *pxFirstTCB, *pxReturn = NULL;
+ UBaseType_t x;
+ char cNextChar;
+
+ /* This function is called with the scheduler suspended. */
+
+ if( listCURRENT_LIST_LENGTH( pxList ) > ( UBaseType_t ) 0 )
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );
+
+ do
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );
+
+ /* Check each character in the name looking for a match or
+ mismatch. */
+ for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )
+ {
+ cNextChar = pxNextTCB->pcTaskName[ x ];
+
+ if( cNextChar != pcNameToQuery[ x ] )
+ {
+ /* Characters didn't match. */
+ break;
+ }
+ else if( cNextChar == 0x00 )
+ {
+ /* Both strings terminated, a match must have been
+ found. */
+ pxReturn = pxNextTCB;
+ break;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ if( pxReturn != NULL )
+ {
+ /* The handle has been found. */
+ break;
+ }
+
+ } while( pxNextTCB != pxFirstTCB );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ return pxReturn;
+ }
+
+#endif /* INCLUDE_xTaskGetHandle */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+ TaskHandle_t xTaskGetHandle( const char *pcNameToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ {
+ UBaseType_t uxQueue = configMAX_PRIORITIES;
+ TCB_t* pxTCB;
+
+ /* Task names will be truncated to configMAX_TASK_NAME_LEN - 1 bytes. */
+ configASSERT( strlen( pcNameToQuery ) < configMAX_TASK_NAME_LEN );
+
+ vTaskSuspendAll();
+ {
+ /* Search the ready lists. */
+ do
+ {
+ uxQueue--;
+ pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) &( pxReadyTasksLists[ uxQueue ] ), pcNameToQuery );
+
+ if( pxTCB != NULL )
+ {
+ /* Found the handle. */
+ break;
+ }
+
+ } while( uxQueue > ( UBaseType_t ) tskIDLE_PRIORITY ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+ /* Search the delayed lists. */
+ if( pxTCB == NULL )
+ {
+ pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) pxDelayedTaskList, pcNameToQuery );
+ }
+
+ if( pxTCB == NULL )
+ {
+ pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) pxOverflowDelayedTaskList, pcNameToQuery );
+ }
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ if( pxTCB == NULL )
+ {
+ /* Search the suspended list. */
+ pxTCB = prvSearchForNameWithinSingleList( &xSuspendedTaskList, pcNameToQuery );
+ }
+ }
+ #endif
+
+ #if( INCLUDE_vTaskDelete == 1 )
+ {
+ if( pxTCB == NULL )
+ {
+ /* Search the deleted list. */
+ pxTCB = prvSearchForNameWithinSingleList( &xTasksWaitingTermination, pcNameToQuery );
+ }
+ }
+ #endif
+ }
+ ( void ) xTaskResumeAll();
+
+ return ( TaskHandle_t ) pxTCB;
+ }
+
+#endif /* INCLUDE_xTaskGetHandle */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ UBaseType_t uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime )
+ {
+ UBaseType_t uxTask = 0, uxQueue = configMAX_PRIORITIES;
+
+ vTaskSuspendAll();
+ {
+ /* Is there a space in the array for each task in the system? */
+ if( uxArraySize >= uxCurrentNumberOfTasks )
+ {
+ /* Fill in an TaskStatus_t structure with information on each
+ task in the Ready state. */
+ do
+ {
+ uxQueue--;
+ uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &( pxReadyTasksLists[ uxQueue ] ), eReady );
+
+ } while( uxQueue > ( UBaseType_t ) tskIDLE_PRIORITY ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+ /* Fill in an TaskStatus_t structure with information on each
+ task in the Blocked state. */
+ uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), ( List_t * ) pxDelayedTaskList, eBlocked );
+ uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), ( List_t * ) pxOverflowDelayedTaskList, eBlocked );
+
+ #if( INCLUDE_vTaskDelete == 1 )
+ {
+ /* Fill in an TaskStatus_t structure with information on
+ each task that has been deleted but not yet cleaned up. */
+ uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &xTasksWaitingTermination, eDeleted );
+ }
+ #endif
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ /* Fill in an TaskStatus_t structure with information on
+ each task in the Suspended state. */
+ uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &xSuspendedTaskList, eSuspended );
+ }
+ #endif
+
+ #if ( configGENERATE_RUN_TIME_STATS == 1)
+ {
+ if( pulTotalRunTime != NULL )
+ {
+ #ifdef portALT_GET_RUN_TIME_COUNTER_VALUE
+ portALT_GET_RUN_TIME_COUNTER_VALUE( ( *pulTotalRunTime ) );
+ #else
+ *pulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();
+ #endif
+ }
+ }
+ #else
+ {
+ if( pulTotalRunTime != NULL )
+ {
+ *pulTotalRunTime = 0;
+ }
+ }
+ #endif
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ ( void ) xTaskResumeAll();
+
+ return uxTask;
+ }
+
+#endif /* configUSE_TRACE_FACILITY */
+/*----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )
+
+ TaskHandle_t xTaskGetIdleTaskHandle( void )
+ {
+ /* If xTaskGetIdleTaskHandle() is called before the scheduler has been
+ started, then xIdleTaskHandle will be NULL. */
+ configASSERT( ( xIdleTaskHandle != NULL ) );
+ return xIdleTaskHandle;
+ }
+
+#endif /* INCLUDE_xTaskGetIdleTaskHandle */
+/*----------------------------------------------------------*/
+
+/* This conditional compilation should use inequality to 0, not equality to 1.
+This is to ensure vTaskStepTick() is available when user defined low power mode
+implementations require configUSE_TICKLESS_IDLE to be set to a value other than
+1. */
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+ void vTaskStepTick( const TickType_t xTicksToJump )
+ {
+ /* Correct the tick count value after a period during which the tick
+ was suppressed. Note this does *not* call the tick hook function for
+ each stepped tick. */
+ configASSERT( ( xTickCount + xTicksToJump ) <= xNextTaskUnblockTime );
+ xTickCount += xTicksToJump;
+ traceINCREASE_TICK_COUNT( xTicksToJump );
+ }
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskAbortDelay == 1 )
+
+ BaseType_t xTaskAbortDelay( TaskHandle_t xTask )
+ {
+ TCB_t *pxTCB = ( TCB_t * ) xTask;
+ BaseType_t xReturn = pdFALSE;
+
+ configASSERT( pxTCB );
+
+ vTaskSuspendAll();
+ {
+ /* A task can only be prematurely removed from the Blocked state if
+ it is actually in the Blocked state. */
+ if( eTaskGetState( xTask ) == eBlocked )
+ {
+ /* Remove the reference to the task from the blocked list. An
+ interrupt won't touch the xStateListItem because the
+ scheduler is suspended. */
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+
+ /* Is the task waiting on an event also? If so remove it from
+ the event list too. Interrupts can touch the event list item,
+ even though the scheduler is suspended, so a critical section
+ is used. */
+ taskENTER_CRITICAL();
+ {
+ if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+ {
+ ( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+ pxTCB->ucDelayAborted = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ /* Place the unblocked task into the appropriate ready list. */
+ prvAddTaskToReadyList( pxTCB );
+
+ /* A task being unblocked cannot cause an immediate context
+ switch if preemption is turned off. */
+ #if ( configUSE_PREEMPTION == 1 )
+ {
+ /* Preemption is on, but a context switch should only be
+ performed if the unblocked task has a priority that is
+ equal to or higher than the currently executing task. */
+ if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+ {
+ /* Pend the yield to be performed when the scheduler
+ is unsuspended. */
+ xYieldPending = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_PREEMPTION */
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ xTaskResumeAll();
+
+ return xReturn;
+ }
+
+#endif /* INCLUDE_xTaskAbortDelay */
+/*----------------------------------------------------------*/
+
+BaseType_t xTaskIncrementTick( void )
+{
+TCB_t * pxTCB;
+TickType_t xItemValue;
+BaseType_t xSwitchRequired = pdFALSE;
+
+ /* Called by the portable layer each time a tick interrupt occurs.
+ Increments the tick then checks to see if the new tick value will cause any
+ tasks to be unblocked. */
+ traceTASK_INCREMENT_TICK( xTickCount );
+ if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+ {
+ /* Minor optimisation. The tick count cannot change in this
+ block. */
+ const TickType_t xConstTickCount = xTickCount + 1;
+
+ /* Increment the RTOS tick, switching the delayed and overflowed
+ delayed lists if it wraps to 0. */
+ xTickCount = xConstTickCount;
+
+ if( xConstTickCount == ( TickType_t ) 0U )
+ {
+ taskSWITCH_DELAYED_LISTS();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* See if this tick has made a timeout expire. Tasks are stored in
+ the queue in the order of their wake time - meaning once one task
+ has been found whose block time has not expired there is no need to
+ look any further down the list. */
+ if( xConstTickCount >= xNextTaskUnblockTime )
+ {
+ for( ;; )
+ {
+ if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )
+ {
+ /* The delayed list is empty. Set xNextTaskUnblockTime
+ to the maximum possible value so it is extremely
+ unlikely that the
+ if( xTickCount >= xNextTaskUnblockTime ) test will pass
+ next time through. */
+ xNextTaskUnblockTime = portMAX_DELAY; /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+ break;
+ }
+ else
+ {
+ /* The delayed list is not empty, get the value of the
+ item at the head of the delayed list. This is the time
+ at which the task at the head of the delayed list must
+ be removed from the Blocked state. */
+ pxTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList );
+ xItemValue = listGET_LIST_ITEM_VALUE( &( pxTCB->xStateListItem ) );
+
+ if( xConstTickCount < xItemValue )
+ {
+ /* It is not time to unblock this item yet, but the
+ item value is the time at which the task at the head
+ of the blocked list must be removed from the Blocked
+ state - so record the item value in
+ xNextTaskUnblockTime. */
+ xNextTaskUnblockTime = xItemValue;
+ break;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* It is time to remove the item from the Blocked state. */
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+
+ /* Is the task waiting on an event also? If so remove
+ it from the event list. */
+ if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+ {
+ ( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Place the unblocked task into the appropriate ready
+ list. */
+ prvAddTaskToReadyList( pxTCB );
+
+ /* A task being unblocked cannot cause an immediate
+ context switch if preemption is turned off. */
+ #if ( configUSE_PREEMPTION == 1 )
+ {
+ /* Preemption is on, but a context switch should
+ only be performed if the unblocked task has a
+ priority that is equal to or higher than the
+ currently executing task. */
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+ {
+ xSwitchRequired = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_PREEMPTION */
+ }
+ }
+ }
+
+ /* Tasks of equal priority to the currently running task will share
+ processing time (time slice) if preemption is on, and the application
+ writer has not explicitly turned time slicing off. */
+ #if ( ( configUSE_PREEMPTION == 1 ) && ( configUSE_TIME_SLICING == 1 ) )
+ {
+ if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ pxCurrentTCB->uxPriority ] ) ) > ( UBaseType_t ) 1 )
+ {
+ xSwitchRequired = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* ( ( configUSE_PREEMPTION == 1 ) && ( configUSE_TIME_SLICING == 1 ) ) */
+
+ #if ( configUSE_TICK_HOOK == 1 )
+ {
+ /* Guard against the tick hook being called when the pended tick
+ count is being unwound (when the scheduler is being unlocked). */
+ if( uxPendedTicks == ( UBaseType_t ) 0U )
+ {
+ vApplicationTickHook();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_TICK_HOOK */
+ }
+ else
+ {
+ ++uxPendedTicks;
+
+ /* The tick hook gets called at regular intervals, even if the
+ scheduler is locked. */
+ #if ( configUSE_TICK_HOOK == 1 )
+ {
+ vApplicationTickHook();
+ }
+ #endif
+ }
+
+ #if ( configUSE_PREEMPTION == 1 )
+ {
+ if( xYieldPending != pdFALSE )
+ {
+ xSwitchRequired = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_PREEMPTION */
+
+ return xSwitchRequired;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+ void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction )
+ {
+ TCB_t *xTCB;
+
+ /* If xTask is NULL then it is the task hook of the calling task that is
+ getting set. */
+ if( xTask == NULL )
+ {
+ xTCB = ( TCB_t * ) pxCurrentTCB;
+ }
+ else
+ {
+ xTCB = ( TCB_t * ) xTask;
+ }
+
+ /* Save the hook function in the TCB. A critical section is required as
+ the value can be accessed from an interrupt. */
+ taskENTER_CRITICAL();
+ xTCB->pxTaskTag = pxHookFunction;
+ taskEXIT_CRITICAL();
+ }
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+ TaskHookFunction_t xTaskGetApplicationTaskTag( TaskHandle_t xTask )
+ {
+ TCB_t *xTCB;
+ TaskHookFunction_t xReturn;
+
+ /* If xTask is NULL then we are setting our own task hook. */
+ if( xTask == NULL )
+ {
+ xTCB = ( TCB_t * ) pxCurrentTCB;
+ }
+ else
+ {
+ xTCB = ( TCB_t * ) xTask;
+ }
+
+ /* Save the hook function in the TCB. A critical section is required as
+ the value can be accessed from an interrupt. */
+ taskENTER_CRITICAL();
+ {
+ xReturn = xTCB->pxTaskTag;
+ }
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+ }
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+ BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter )
+ {
+ TCB_t *xTCB;
+ BaseType_t xReturn;
+
+ /* If xTask is NULL then we are calling our own task hook. */
+ if( xTask == NULL )
+ {
+ xTCB = ( TCB_t * ) pxCurrentTCB;
+ }
+ else
+ {
+ xTCB = ( TCB_t * ) xTask;
+ }
+
+ if( xTCB->pxTaskTag != NULL )
+ {
+ xReturn = xTCB->pxTaskTag( pvParameter );
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+void vTaskSwitchContext( void )
+{
+ if( uxSchedulerSuspended != ( UBaseType_t ) pdFALSE )
+ {
+ /* The scheduler is currently suspended - do not allow a context
+ switch. */
+ xYieldPending = pdTRUE;
+ }
+ else
+ {
+ xYieldPending = pdFALSE;
+ traceTASK_SWITCHED_OUT();
+
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )
+ {
+ #ifdef portALT_GET_RUN_TIME_COUNTER_VALUE
+ portALT_GET_RUN_TIME_COUNTER_VALUE( ulTotalRunTime );
+ #else
+ ulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();
+ #endif
+
+ /* Add the amount of time the task has been running to the
+ accumulated time so far. The time the task started running was
+ stored in ulTaskSwitchedInTime. Note that there is no overflow
+ protection here so count values are only valid until the timer
+ overflows. The guard against negative values is to protect
+ against suspect run time stat counter implementations - which
+ are provided by the application, not the kernel. */
+ if( ulTotalRunTime > ulTaskSwitchedInTime )
+ {
+ pxCurrentTCB->ulRunTimeCounter += ( ulTotalRunTime - ulTaskSwitchedInTime );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ ulTaskSwitchedInTime = ulTotalRunTime;
+ }
+ #endif /* configGENERATE_RUN_TIME_STATS */
+
+ /* Check for stack overflow, if configured. */
+ taskCHECK_FOR_STACK_OVERFLOW();
+
+ /* Select a new task to run using either the generic C or port
+ optimised asm code. */
+ taskSELECT_HIGHEST_PRIORITY_TASK();
+ traceTASK_SWITCHED_IN();
+
+ #if ( configUSE_NEWLIB_REENTRANT == 1 )
+ {
+ /* Switch Newlib's _impure_ptr variable to point to the _reent
+ structure specific to this task. */
+ _impure_ptr = &( pxCurrentTCB->xNewLib_reent );
+ }
+ #endif /* configUSE_NEWLIB_REENTRANT */
+ }
+}
+/*-----------------------------------------------------------*/
+
+void vTaskPlaceOnEventList( List_t * const pxEventList, const TickType_t xTicksToWait )
+{
+ configASSERT( pxEventList );
+
+ /* THIS FUNCTION MUST BE CALLED WITH EITHER INTERRUPTS DISABLED OR THE
+ SCHEDULER SUSPENDED AND THE QUEUE BEING ACCESSED LOCKED. */
+
+ /* Place the event list item of the TCB in the appropriate event list.
+ This is placed in the list in priority order so the highest priority task
+ is the first to be woken by the event. The queue that contains the event
+ list is locked, preventing simultaneous access from interrupts. */
+ vListInsert( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+ prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+}
+/*-----------------------------------------------------------*/
+
+void vTaskPlaceOnUnorderedEventList( List_t * pxEventList, const TickType_t xItemValue, const TickType_t xTicksToWait )
+{
+ configASSERT( pxEventList );
+
+ /* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. It is used by
+ the event groups implementation. */
+ configASSERT( uxSchedulerSuspended != 0 );
+
+ /* Store the item value in the event list item. It is safe to access the
+ event list item here as interrupts won't access the event list item of a
+ task that is not in the Blocked state. */
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ), xItemValue | taskEVENT_LIST_ITEM_VALUE_IN_USE );
+
+ /* Place the event list item of the TCB at the end of the appropriate event
+ list. It is safe to access the event list here because it is part of an
+ event group implementation - and interrupts don't access event groups
+ directly (instead they access them indirectly by pending function calls to
+ the task level). */
+ vListInsertEnd( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+ prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TIMERS == 1 )
+
+ void vTaskPlaceOnEventListRestricted( List_t * const pxEventList, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely )
+ {
+ configASSERT( pxEventList );
+
+ /* This function should not be called by application code hence the
+ 'Restricted' in its name. It is not part of the public API. It is
+ designed for use by kernel code, and has special calling requirements -
+ it should be called with the scheduler suspended. */
+
+
+ /* Place the event list item of the TCB in the appropriate event list.
+ In this case it is assume that this is the only task that is going to
+ be waiting on this event list, so the faster vListInsertEnd() function
+ can be used in place of vListInsert. */
+ vListInsertEnd( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+ /* If the task should block indefinitely then set the block time to a
+ value that will be recognised as an indefinite delay inside the
+ prvAddCurrentTaskToDelayedList() function. */
+ if( xWaitIndefinitely != pdFALSE )
+ {
+ xTicksToWait = portMAX_DELAY;
+ }
+
+ traceTASK_DELAY_UNTIL( ( xTickCount + xTicksToWait ) );
+ prvAddCurrentTaskToDelayedList( xTicksToWait, xWaitIndefinitely );
+ }
+
+#endif /* configUSE_TIMERS */
+/*-----------------------------------------------------------*/
+
+BaseType_t xTaskRemoveFromEventList( const List_t * const pxEventList )
+{
+TCB_t *pxUnblockedTCB;
+BaseType_t xReturn;
+
+ /* THIS FUNCTION MUST BE CALLED FROM A CRITICAL SECTION. It can also be
+ called from a critical section within an ISR. */
+
+ /* The event list is sorted in priority order, so the first in the list can
+ be removed as it is known to be the highest priority. Remove the TCB from
+ the delayed list, and add it to the ready list.
+
+ If an event is for a queue that is locked then this function will never
+ get called - the lock count on the queue will get modified instead. This
+ means exclusive access to the event list is guaranteed here.
+
+ This function assumes that a check has already been made to ensure that
+ pxEventList is not empty. */
+ pxUnblockedTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );
+ configASSERT( pxUnblockedTCB );
+ ( void ) uxListRemove( &( pxUnblockedTCB->xEventListItem ) );
+
+ if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+ {
+ ( void ) uxListRemove( &( pxUnblockedTCB->xStateListItem ) );
+ prvAddTaskToReadyList( pxUnblockedTCB );
+ }
+ else
+ {
+ /* The delayed and ready lists cannot be accessed, so hold this task
+ pending until the scheduler is resumed. */
+ vListInsertEnd( &( xPendingReadyList ), &( pxUnblockedTCB->xEventListItem ) );
+ }
+
+ if( pxUnblockedTCB->uxPriority > pxCurrentTCB->uxPriority )
+ {
+ /* Return true if the task removed from the event list has a higher
+ priority than the calling task. This allows the calling task to know if
+ it should force a context switch now. */
+ xReturn = pdTRUE;
+
+ /* Mark that a yield is pending in case the user is not using the
+ "xHigherPriorityTaskWoken" parameter to an ISR safe FreeRTOS function. */
+ xYieldPending = pdTRUE;
+ }
+ else
+ {
+ xReturn = pdFALSE;
+ }
+
+ #if( configUSE_TICKLESS_IDLE != 0 )
+ {
+ /* If a task is blocked on a kernel object then xNextTaskUnblockTime
+ might be set to the blocked task's time out time. If the task is
+ unblocked for a reason other than a timeout xNextTaskUnblockTime is
+ normally left unchanged, because it is automatically reset to a new
+ value when the tick count equals xNextTaskUnblockTime. However if
+ tickless idling is used it might be more important to enter sleep mode
+ at the earliest possible time - so reset xNextTaskUnblockTime here to
+ ensure it is updated at the earliest possible time. */
+ prvResetNextTaskUnblockTime();
+ }
+ #endif
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, const TickType_t xItemValue )
+{
+TCB_t *pxUnblockedTCB;
+BaseType_t xReturn;
+
+ /* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. It is used by
+ the event flags implementation. */
+ configASSERT( uxSchedulerSuspended != pdFALSE );
+
+ /* Store the new item value in the event list. */
+ listSET_LIST_ITEM_VALUE( pxEventListItem, xItemValue | taskEVENT_LIST_ITEM_VALUE_IN_USE );
+
+ /* Remove the event list form the event flag. Interrupts do not access
+ event flags. */
+ pxUnblockedTCB = ( TCB_t * ) listGET_LIST_ITEM_OWNER( pxEventListItem );
+ configASSERT( pxUnblockedTCB );
+ ( void ) uxListRemove( pxEventListItem );
+
+ /* Remove the task from the delayed list and add it to the ready list. The
+ scheduler is suspended so interrupts will not be accessing the ready
+ lists. */
+ ( void ) uxListRemove( &( pxUnblockedTCB->xStateListItem ) );
+ prvAddTaskToReadyList( pxUnblockedTCB );
+
+ if( pxUnblockedTCB->uxPriority > pxCurrentTCB->uxPriority )
+ {
+ /* Return true if the task removed from the event list has
+ a higher priority than the calling task. This allows
+ the calling task to know if it should force a context
+ switch now. */
+ xReturn = pdTRUE;
+
+ /* Mark that a yield is pending in case the user is not using the
+ "xHigherPriorityTaskWoken" parameter to an ISR safe FreeRTOS function. */
+ xYieldPending = pdTRUE;
+ }
+ else
+ {
+ xReturn = pdFALSE;
+ }
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskSetTimeOutState( TimeOut_t * const pxTimeOut )
+{
+ configASSERT( pxTimeOut );
+ pxTimeOut->xOverflowCount = xNumOfOverflows;
+ pxTimeOut->xTimeOnEntering = xTickCount;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait )
+{
+BaseType_t xReturn;
+
+ configASSERT( pxTimeOut );
+ configASSERT( pxTicksToWait );
+
+ taskENTER_CRITICAL();
+ {
+ /* Minor optimisation. The tick count cannot change in this block. */
+ const TickType_t xConstTickCount = xTickCount;
+
+ #if( INCLUDE_xTaskAbortDelay == 1 )
+ if( pxCurrentTCB->ucDelayAborted != pdFALSE )
+ {
+ /* The delay was aborted, which is not the same as a time out,
+ but has the same result. */
+ pxCurrentTCB->ucDelayAborted = pdFALSE;
+ xReturn = pdTRUE;
+ }
+ else
+ #endif
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ if( *pxTicksToWait == portMAX_DELAY )
+ {
+ /* If INCLUDE_vTaskSuspend is set to 1 and the block time
+ specified is the maximum block time then the task should block
+ indefinitely, and therefore never time out. */
+ xReturn = pdFALSE;
+ }
+ else
+ #endif
+
+ if( ( xNumOfOverflows != pxTimeOut->xOverflowCount ) && ( xConstTickCount >= pxTimeOut->xTimeOnEntering ) ) /*lint !e525 Indentation preferred as is to make code within pre-processor directives clearer. */
+ {
+ /* The tick count is greater than the time at which
+ vTaskSetTimeout() was called, but has also overflowed since
+ vTaskSetTimeOut() was called. It must have wrapped all the way
+ around and gone past again. This passed since vTaskSetTimeout()
+ was called. */
+ xReturn = pdTRUE;
+ }
+ else if( ( ( TickType_t ) ( xConstTickCount - pxTimeOut->xTimeOnEntering ) ) < *pxTicksToWait ) /*lint !e961 Explicit casting is only redundant with some compilers, whereas others require it to prevent integer conversion errors. */
+ {
+ /* Not a genuine timeout. Adjust parameters for time remaining. */
+ *pxTicksToWait -= ( xConstTickCount - pxTimeOut->xTimeOnEntering );
+ vTaskSetTimeOutState( pxTimeOut );
+ xReturn = pdFALSE;
+ }
+ else
+ {
+ xReturn = pdTRUE;
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskMissedYield( void )
+{
+ xYieldPending = pdTRUE;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ UBaseType_t uxTaskGetTaskNumber( TaskHandle_t xTask )
+ {
+ UBaseType_t uxReturn;
+ TCB_t *pxTCB;
+
+ if( xTask != NULL )
+ {
+ pxTCB = ( TCB_t * ) xTask;
+ uxReturn = pxTCB->uxTaskNumber;
+ }
+ else
+ {
+ uxReturn = 0U;
+ }
+
+ return uxReturn;
+ }
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ void vTaskSetTaskNumber( TaskHandle_t xTask, const UBaseType_t uxHandle )
+ {
+ TCB_t *pxTCB;
+
+ if( xTask != NULL )
+ {
+ pxTCB = ( TCB_t * ) xTask;
+ pxTCB->uxTaskNumber = uxHandle;
+ }
+ }
+
+#endif /* configUSE_TRACE_FACILITY */
+
+/*
+ * -----------------------------------------------------------
+ * The Idle task.
+ * ----------------------------------------------------------
+ *
+ * The portTASK_FUNCTION() macro is used to allow port/compiler specific
+ * language extensions. The equivalent prototype for this function is:
+ *
+ * void prvIdleTask( void *pvParameters );
+ *
+ */
+static portTASK_FUNCTION( prvIdleTask, pvParameters )
+{
+ /* Stop warnings. */
+ ( void ) pvParameters;
+
+ /** THIS IS THE RTOS IDLE TASK - WHICH IS CREATED AUTOMATICALLY WHEN THE
+ SCHEDULER IS STARTED. **/
+
+ for( ;; )
+ {
+ /* See if any tasks have deleted themselves - if so then the idle task
+ is responsible for freeing the deleted task's TCB and stack. */
+ prvCheckTasksWaitingTermination();
+
+ #if ( configUSE_PREEMPTION == 0 )
+ {
+ /* If we are not using preemption we keep forcing a task switch to
+ see if any other task has become available. If we are using
+ preemption we don't need to do this as any task becoming available
+ will automatically get the processor anyway. */
+ taskYIELD();
+ }
+ #endif /* configUSE_PREEMPTION */
+
+ #if ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) )
+ {
+ /* When using preemption tasks of equal priority will be
+ timesliced. If a task that is sharing the idle priority is ready
+ to run then the idle task should yield before the end of the
+ timeslice.
+
+ A critical region is not required here as we are just reading from
+ the list, and an occasional incorrect value will not matter. If
+ the ready list at the idle priority contains more than one task
+ then a task other than the idle task is ready to execute. */
+ if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > ( UBaseType_t ) 1 )
+ {
+ taskYIELD();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) ) */
+
+ #if ( configUSE_IDLE_HOOK == 1 )
+ {
+ extern void vApplicationIdleHook( void );
+
+ /* Call the user defined function from within the idle task. This
+ allows the application designer to add background functionality
+ without the overhead of a separate task.
+ NOTE: vApplicationIdleHook() MUST NOT, UNDER ANY CIRCUMSTANCES,
+ CALL A FUNCTION THAT MIGHT BLOCK. */
+ vApplicationIdleHook();
+ }
+ #endif /* configUSE_IDLE_HOOK */
+
+ /* This conditional compilation should use inequality to 0, not equality
+ to 1. This is to ensure portSUPPRESS_TICKS_AND_SLEEP() is called when
+ user defined low power mode implementations require
+ configUSE_TICKLESS_IDLE to be set to a value other than 1. */
+ #if ( configUSE_TICKLESS_IDLE != 0 )
+ {
+ TickType_t xExpectedIdleTime;
+
+ /* It is not desirable to suspend then resume the scheduler on
+ each iteration of the idle task. Therefore, a preliminary
+ test of the expected idle time is performed without the
+ scheduler suspended. The result here is not necessarily
+ valid. */
+ xExpectedIdleTime = prvGetExpectedIdleTime();
+
+ if( xExpectedIdleTime >= configEXPECTED_IDLE_TIME_BEFORE_SLEEP )
+ {
+ vTaskSuspendAll();
+ {
+ /* Now the scheduler is suspended, the expected idle
+ time can be sampled again, and this time its value can
+ be used. */
+ configASSERT( xNextTaskUnblockTime >= xTickCount );
+ xExpectedIdleTime = prvGetExpectedIdleTime();
+
+ if( xExpectedIdleTime >= configEXPECTED_IDLE_TIME_BEFORE_SLEEP )
+ {
+ traceLOW_POWER_IDLE_BEGIN();
+ portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime );
+ traceLOW_POWER_IDLE_END();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ ( void ) xTaskResumeAll();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configUSE_TICKLESS_IDLE */
+ }
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TICKLESS_IDLE != 0 )
+
+ eSleepModeStatus eTaskConfirmSleepModeStatus( void )
+ {
+ /* The idle task exists in addition to the application tasks. */
+ const UBaseType_t uxNonApplicationTasks = 1;
+ eSleepModeStatus eReturn = eStandardSleep;
+
+ if( listCURRENT_LIST_LENGTH( &xPendingReadyList ) != 0 )
+ {
+ /* A task was made ready while the scheduler was suspended. */
+ eReturn = eAbortSleep;
+ }
+ else if( xYieldPending != pdFALSE )
+ {
+ /* A yield was pended while the scheduler was suspended. */
+ eReturn = eAbortSleep;
+ }
+ else
+ {
+ /* If all the tasks are in the suspended list (which might mean they
+ have an infinite block time rather than actually being suspended)
+ then it is safe to turn all clocks off and just wait for external
+ interrupts. */
+ if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == ( uxCurrentNumberOfTasks - uxNonApplicationTasks ) )
+ {
+ eReturn = eNoTasksWaitingTimeout;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ return eReturn;
+ }
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+#if ( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+
+ void vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue )
+ {
+ TCB_t *pxTCB;
+
+ if( xIndex < configNUM_THREAD_LOCAL_STORAGE_POINTERS )
+ {
+ pxTCB = prvGetTCBFromHandle( xTaskToSet );
+ pxTCB->pvThreadLocalStoragePointers[ xIndex ] = pvValue;
+ }
+ }
+
+#endif /* configNUM_THREAD_LOCAL_STORAGE_POINTERS */
+/*-----------------------------------------------------------*/
+
+#if ( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+
+ void *pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex )
+ {
+ void *pvReturn = NULL;
+ TCB_t *pxTCB;
+
+ if( xIndex < configNUM_THREAD_LOCAL_STORAGE_POINTERS )
+ {
+ pxTCB = prvGetTCBFromHandle( xTaskToQuery );
+ pvReturn = pxTCB->pvThreadLocalStoragePointers[ xIndex ];
+ }
+ else
+ {
+ pvReturn = NULL;
+ }
+
+ return pvReturn;
+ }
+
+#endif /* configNUM_THREAD_LOCAL_STORAGE_POINTERS */
+/*-----------------------------------------------------------*/
+
+#if ( portUSING_MPU_WRAPPERS == 1 )
+
+ void vTaskAllocateMPURegions( TaskHandle_t xTaskToModify, const MemoryRegion_t * const xRegions )
+ {
+ TCB_t *pxTCB;
+
+ /* If null is passed in here then we are modifying the MPU settings of
+ the calling task. */
+ pxTCB = prvGetTCBFromHandle( xTaskToModify );
+
+ vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, NULL, 0 );
+ }
+
+#endif /* portUSING_MPU_WRAPPERS */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseTaskLists( void )
+{
+UBaseType_t uxPriority;
+
+ for( uxPriority = ( UBaseType_t ) 0U; uxPriority < ( UBaseType_t ) configMAX_PRIORITIES; uxPriority++ )
+ {
+ vListInitialise( &( pxReadyTasksLists[ uxPriority ] ) );
+ }
+
+ vListInitialise( &xDelayedTaskList1 );
+ vListInitialise( &xDelayedTaskList2 );
+ vListInitialise( &xPendingReadyList );
+
+ #if ( INCLUDE_vTaskDelete == 1 )
+ {
+ vListInitialise( &xTasksWaitingTermination );
+ }
+ #endif /* INCLUDE_vTaskDelete */
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ vListInitialise( &xSuspendedTaskList );
+ }
+ #endif /* INCLUDE_vTaskSuspend */
+
+ /* Start with pxDelayedTaskList using list1 and the pxOverflowDelayedTaskList
+ using list2. */
+ pxDelayedTaskList = &xDelayedTaskList1;
+ pxOverflowDelayedTaskList = &xDelayedTaskList2;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCheckTasksWaitingTermination( void )
+{
+
+ /** THIS FUNCTION IS CALLED FROM THE RTOS IDLE TASK **/
+
+ #if ( INCLUDE_vTaskDelete == 1 )
+ {
+ BaseType_t xListIsEmpty;
+
+ /* ucTasksDeleted is used to prevent vTaskSuspendAll() being called
+ too often in the idle task. */
+ while( uxDeletedTasksWaitingCleanUp > ( UBaseType_t ) 0U )
+ {
+ vTaskSuspendAll();
+ {
+ xListIsEmpty = listLIST_IS_EMPTY( &xTasksWaitingTermination );
+ }
+ ( void ) xTaskResumeAll();
+
+ if( xListIsEmpty == pdFALSE )
+ {
+ TCB_t *pxTCB;
+
+ taskENTER_CRITICAL();
+ {
+ pxTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( ( &xTasksWaitingTermination ) );
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+ --uxCurrentNumberOfTasks;
+ --uxDeletedTasksWaitingCleanUp;
+ }
+ taskEXIT_CRITICAL();
+
+ prvDeleteTCB( pxTCB );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ #endif /* INCLUDE_vTaskDelete */
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TRACE_FACILITY == 1 )
+
+ void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState )
+ {
+ TCB_t *pxTCB;
+
+ /* xTask is NULL then get the state of the calling task. */
+ pxTCB = prvGetTCBFromHandle( xTask );
+
+ pxTaskStatus->xHandle = ( TaskHandle_t ) pxTCB;
+ pxTaskStatus->pcTaskName = ( const char * ) &( pxTCB->pcTaskName [ 0 ] );
+ pxTaskStatus->uxCurrentPriority = pxTCB->uxPriority;
+ pxTaskStatus->pxStackBase = pxTCB->pxStack;
+ pxTaskStatus->xTaskNumber = pxTCB->uxTCBNumber;
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ /* If the task is in the suspended list then there is a chance it is
+ actually just blocked indefinitely - so really it should be reported as
+ being in the Blocked state. */
+ if( pxTaskStatus->eCurrentState == eSuspended )
+ {
+ vTaskSuspendAll();
+ {
+ if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+ {
+ pxTaskStatus->eCurrentState = eBlocked;
+ }
+ }
+ xTaskResumeAll();
+ }
+ }
+ #endif /* INCLUDE_vTaskSuspend */
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ pxTaskStatus->uxBasePriority = pxTCB->uxBasePriority;
+ }
+ #else
+ {
+ pxTaskStatus->uxBasePriority = 0;
+ }
+ #endif
+
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )
+ {
+ pxTaskStatus->ulRunTimeCounter = pxTCB->ulRunTimeCounter;
+ }
+ #else
+ {
+ pxTaskStatus->ulRunTimeCounter = 0;
+ }
+ #endif
+
+ /* Obtaining the task state is a little fiddly, so is only done if the value
+ of eState passed into this function is eInvalid - otherwise the state is
+ just set to whatever is passed in. */
+ if( eState != eInvalid )
+ {
+ pxTaskStatus->eCurrentState = eState;
+ }
+ else
+ {
+ pxTaskStatus->eCurrentState = eTaskGetState( xTask );
+ }
+
+ /* Obtaining the stack space takes some time, so the xGetFreeStackSpace
+ parameter is provided to allow it to be skipped. */
+ if( xGetFreeStackSpace != pdFALSE )
+ {
+ #if ( portSTACK_GROWTH > 0 )
+ {
+ pxTaskStatus->usStackHighWaterMark = prvTaskCheckFreeStackSpace( ( uint8_t * ) pxTCB->pxEndOfStack );
+ }
+ #else
+ {
+ pxTaskStatus->usStackHighWaterMark = prvTaskCheckFreeStackSpace( ( uint8_t * ) pxTCB->pxStack );
+ }
+ #endif
+ }
+ else
+ {
+ pxTaskStatus->usStackHighWaterMark = 0;
+ }
+ }
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ static UBaseType_t prvListTasksWithinSingleList( TaskStatus_t *pxTaskStatusArray, List_t *pxList, eTaskState eState )
+ {
+ volatile TCB_t *pxNextTCB, *pxFirstTCB;
+ UBaseType_t uxTask = 0;
+
+ if( listCURRENT_LIST_LENGTH( pxList ) > ( UBaseType_t ) 0 )
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );
+
+ /* Populate an TaskStatus_t structure within the
+ pxTaskStatusArray array for each task that is referenced from
+ pxList. See the definition of TaskStatus_t in task.h for the
+ meaning of each TaskStatus_t structure member. */
+ do
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );
+ vTaskGetInfo( ( TaskHandle_t ) pxNextTCB, &( pxTaskStatusArray[ uxTask ] ), pdTRUE, eState );
+ uxTask++;
+ } while( pxNextTCB != pxFirstTCB );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ return uxTask;
+ }
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )
+
+ static uint16_t prvTaskCheckFreeStackSpace( const uint8_t * pucStackByte )
+ {
+ uint32_t ulCount = 0U;
+
+ while( *pucStackByte == ( uint8_t ) tskSTACK_FILL_BYTE )
+ {
+ pucStackByte -= portSTACK_GROWTH;
+ ulCount++;
+ }
+
+ ulCount /= ( uint32_t ) sizeof( StackType_t ); /*lint !e961 Casting is not redundant on smaller architectures. */
+
+ return ( uint16_t ) ulCount;
+ }
+
+#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskGetStackHighWaterMark == 1 )
+
+ UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask )
+ {
+ TCB_t *pxTCB;
+ uint8_t *pucEndOfStack;
+ UBaseType_t uxReturn;
+
+ pxTCB = prvGetTCBFromHandle( xTask );
+
+ #if portSTACK_GROWTH < 0
+ {
+ pucEndOfStack = ( uint8_t * ) pxTCB->pxStack;
+ }
+ #else
+ {
+ pucEndOfStack = ( uint8_t * ) pxTCB->pxEndOfStack;
+ }
+ #endif
+
+ uxReturn = ( UBaseType_t ) prvTaskCheckFreeStackSpace( pucEndOfStack );
+
+ return uxReturn;
+ }
+
+#endif /* INCLUDE_uxTaskGetStackHighWaterMark */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelete == 1 )
+
+ static void prvDeleteTCB( TCB_t *pxTCB )
+ {
+ /* This call is required specifically for the TriCore port. It must be
+ above the vPortFree() calls. The call is also used by ports/demos that
+ want to allocate and clean RAM statically. */
+ portCLEAN_UP_TCB( pxTCB );
+
+ /* Free up the memory allocated by the scheduler for the task. It is up
+ to the task to free any memory allocated at the application level. */
+ #if ( configUSE_NEWLIB_REENTRANT == 1 )
+ {
+ _reclaim_reent( &( pxTCB->xNewLib_reent ) );
+ }
+ #endif /* configUSE_NEWLIB_REENTRANT */
+
+ #if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) && ( portUSING_MPU_WRAPPERS == 0 ) )
+ {
+ /* The task can only have been allocated dynamically - free both
+ the stack and TCB. */
+ vPortFree( pxTCB->pxStack );
+ vPortFree( pxTCB );
+ }
+ #elif( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE == 1 )
+ {
+ /* The task could have been allocated statically or dynamically, so
+ check what was statically allocated before trying to free the
+ memory. */
+ if( pxTCB->ucStaticallyAllocated == tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB )
+ {
+ /* Both the stack and TCB were allocated dynamically, so both
+ must be freed. */
+ vPortFree( pxTCB->pxStack );
+ vPortFree( pxTCB );
+ }
+ else if( pxTCB->ucStaticallyAllocated == tskSTATICALLY_ALLOCATED_STACK_ONLY )
+ {
+ /* Only the stack was statically allocated, so the TCB is the
+ only memory that must be freed. */
+ vPortFree( pxTCB );
+ }
+ else
+ {
+ /* Neither the stack nor the TCB were allocated dynamically, so
+ nothing needs to be freed. */
+ configASSERT( pxTCB->ucStaticallyAllocated == tskSTATICALLY_ALLOCATED_STACK_AND_TCB )
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+ }
+
+#endif /* INCLUDE_vTaskDelete */
+/*-----------------------------------------------------------*/
+
+static void prvResetNextTaskUnblockTime( void )
+{
+TCB_t *pxTCB;
+
+ if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )
+ {
+ /* The new current delayed list is empty. Set xNextTaskUnblockTime to
+ the maximum possible value so it is extremely unlikely that the
+ if( xTickCount >= xNextTaskUnblockTime ) test will pass until
+ there is an item in the delayed list. */
+ xNextTaskUnblockTime = portMAX_DELAY;
+ }
+ else
+ {
+ /* The new current delayed list is not empty, get the value of
+ the item at the head of the delayed list. This is the time at
+ which the task at the head of the delayed list should be removed
+ from the Blocked state. */
+ ( pxTCB ) = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList );
+ xNextTaskUnblockTime = listGET_LIST_ITEM_VALUE( &( ( pxTCB )->xStateListItem ) );
+ }
+}
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) )
+
+ TaskHandle_t xTaskGetCurrentTaskHandle( void )
+ {
+ TaskHandle_t xReturn;
+
+ /* A critical section is not required as this is not called from
+ an interrupt and the current TCB will always be the same for any
+ individual execution thread. */
+ xReturn = pxCurrentTCB;
+
+ return xReturn;
+ }
+
+#endif /* ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+
+ BaseType_t xTaskGetSchedulerState( void )
+ {
+ BaseType_t xReturn;
+
+ if( xSchedulerRunning == pdFALSE )
+ {
+ xReturn = taskSCHEDULER_NOT_STARTED;
+ }
+ else
+ {
+ if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+ {
+ xReturn = taskSCHEDULER_RUNNING;
+ }
+ else
+ {
+ xReturn = taskSCHEDULER_SUSPENDED;
+ }
+ }
+
+ return xReturn;
+ }
+
+#endif /* ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+ void vTaskPriorityInherit( TaskHandle_t const pxMutexHolder )
+ {
+ TCB_t * const pxTCB = ( TCB_t * ) pxMutexHolder;
+
+ /* If the mutex was given back by an interrupt while the queue was
+ locked then the mutex holder might now be NULL. */
+ if( pxMutexHolder != NULL )
+ {
+ /* If the holder of the mutex has a priority below the priority of
+ the task attempting to obtain the mutex then it will temporarily
+ inherit the priority of the task attempting to obtain the mutex. */
+ if( pxTCB->uxPriority < pxCurrentTCB->uxPriority )
+ {
+ /* Adjust the mutex holder state to account for its new
+ priority. Only reset the event list item value if the value is
+ not being used for anything else. */
+ if( ( listGET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )
+ {
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxCurrentTCB->uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* If the task being modified is in the ready state it will need
+ to be moved into a new list. */
+ if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ pxTCB->uxPriority ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )
+ {
+ if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+ {
+ taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Inherit the priority before being moved into the new list. */
+ pxTCB->uxPriority = pxCurrentTCB->uxPriority;
+ prvAddTaskToReadyList( pxTCB );
+ }
+ else
+ {
+ /* Just inherit the priority. */
+ pxTCB->uxPriority = pxCurrentTCB->uxPriority;
+ }
+
+ traceTASK_PRIORITY_INHERIT( pxTCB, pxCurrentTCB->uxPriority );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+ BaseType_t xTaskPriorityDisinherit( TaskHandle_t const pxMutexHolder )
+ {
+ TCB_t * const pxTCB = ( TCB_t * ) pxMutexHolder;
+ BaseType_t xReturn = pdFALSE;
+
+ if( pxMutexHolder != NULL )
+ {
+ /* A task can only have an inherited priority if it holds the mutex.
+ If the mutex is held by a task then it cannot be given from an
+ interrupt, and if a mutex is given by the holding task then it must
+ be the running state task. */
+ configASSERT( pxTCB == pxCurrentTCB );
+
+ configASSERT( pxTCB->uxMutexesHeld );
+ ( pxTCB->uxMutexesHeld )--;
+
+ /* Has the holder of the mutex inherited the priority of another
+ task? */
+ if( pxTCB->uxPriority != pxTCB->uxBasePriority )
+ {
+ /* Only disinherit if no other mutexes are held. */
+ if( pxTCB->uxMutexesHeld == ( UBaseType_t ) 0 )
+ {
+ /* A task can only have an inherited priority if it holds
+ the mutex. If the mutex is held by a task then it cannot be
+ given from an interrupt, and if a mutex is given by the
+ holding task then it must be the running state task. Remove
+ the holding task from the ready list. */
+ if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+ {
+ taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Disinherit the priority before adding the task into the
+ new ready list. */
+ traceTASK_PRIORITY_DISINHERIT( pxTCB, pxTCB->uxBasePriority );
+ pxTCB->uxPriority = pxTCB->uxBasePriority;
+
+ /* Reset the event list item value. It cannot be in use for
+ any other purpose if this task is running, and it must be
+ running to give back the mutex. */
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxTCB->uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+ prvAddTaskToReadyList( pxTCB );
+
+ /* Return true to indicate that a context switch is required.
+ This is only actually required in the corner case whereby
+ multiple mutexes were held and the mutexes were given back
+ in an order different to that in which they were taken.
+ If a context switch did not occur when the first mutex was
+ returned, even if a task was waiting on it, then a context
+ switch should occur when the last mutex is returned whether
+ a task is waiting on it or not. */
+ xReturn = pdTRUE;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+
+ void vTaskEnterCritical( void )
+ {
+ portDISABLE_INTERRUPTS();
+
+ if( xSchedulerRunning != pdFALSE )
+ {
+ ( pxCurrentTCB->uxCriticalNesting )++;
+
+ /* This is not the interrupt safe version of the enter critical
+ function so assert() if it is being called from an interrupt
+ context. Only API functions that end in "FromISR" can be used in an
+ interrupt. Only assert if the critical nesting count is 1 to
+ protect against recursive calls if the assert function also uses a
+ critical section. */
+ if( pxCurrentTCB->uxCriticalNesting == 1 )
+ {
+ portASSERT_IF_IN_ISR();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* portCRITICAL_NESTING_IN_TCB */
+/*-----------------------------------------------------------*/
+
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+
+ void vTaskExitCritical( void )
+ {
+ if( xSchedulerRunning != pdFALSE )
+ {
+ if( pxCurrentTCB->uxCriticalNesting > 0U )
+ {
+ ( pxCurrentTCB->uxCriticalNesting )--;
+
+ if( pxCurrentTCB->uxCriticalNesting == 0U )
+ {
+ portENABLE_INTERRUPTS();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* portCRITICAL_NESTING_IN_TCB */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+ static char *prvWriteNameToBuffer( char *pcBuffer, const char *pcTaskName )
+ {
+ size_t x;
+
+ /* Start by copying the entire string. */
+ strcpy( pcBuffer, pcTaskName );
+
+ /* Pad the end of the string with spaces to ensure columns line up when
+ printed out. */
+ for( x = strlen( pcBuffer ); x < ( size_t ) ( configMAX_TASK_NAME_LEN - 1 ); x++ )
+ {
+ pcBuffer[ x ] = ' ';
+ }
+
+ /* Terminate. */
+ pcBuffer[ x ] = 0x00;
+
+ /* Return the new end of string. */
+ return &( pcBuffer[ x ] );
+ }
+
+#endif /* ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+ void vTaskList( char * pcWriteBuffer )
+ {
+ TaskStatus_t *pxTaskStatusArray;
+ volatile UBaseType_t uxArraySize, x;
+ char cStatus;
+
+ /*
+ * PLEASE NOTE:
+ *
+ * This function is provided for convenience only, and is used by many
+ * of the demo applications. Do not consider it to be part of the
+ * scheduler.
+ *
+ * vTaskList() calls uxTaskGetSystemState(), then formats part of the
+ * uxTaskGetSystemState() output into a human readable table that
+ * displays task names, states and stack usage.
+ *
+ * vTaskList() has a dependency on the sprintf() C library function that
+ * might bloat the code size, use a lot of stack, and provide different
+ * results on different platforms. An alternative, tiny, third party,
+ * and limited functionality implementation of sprintf() is provided in
+ * many of the FreeRTOS/Demo sub-directories in a file called
+ * printf-stdarg.c (note printf-stdarg.c does not provide a full
+ * snprintf() implementation!).
+ *
+ * It is recommended that production systems call uxTaskGetSystemState()
+ * directly to get access to raw stats data, rather than indirectly
+ * through a call to vTaskList().
+ */
+
+
+ /* Make sure the write buffer does not contain a string. */
+ *pcWriteBuffer = 0x00;
+
+ /* Take a snapshot of the number of tasks in case it changes while this
+ function is executing. */
+ uxArraySize = uxCurrentNumberOfTasks;
+
+ /* Allocate an array index for each task. NOTE! if
+ configSUPPORT_DYNAMIC_ALLOCATION is set to 0 then pvPortMalloc() will
+ equate to NULL. */
+ pxTaskStatusArray = pvPortMalloc( uxCurrentNumberOfTasks * sizeof( TaskStatus_t ) );
+
+ if( pxTaskStatusArray != NULL )
+ {
+ /* Generate the (binary) data. */
+ uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, NULL );
+
+ /* Create a human readable table from the binary data. */
+ for( x = 0; x < uxArraySize; x++ )
+ {
+ switch( pxTaskStatusArray[ x ].eCurrentState )
+ {
+ case eReady: cStatus = tskREADY_CHAR;
+ break;
+
+ case eBlocked: cStatus = tskBLOCKED_CHAR;
+ break;
+
+ case eSuspended: cStatus = tskSUSPENDED_CHAR;
+ break;
+
+ case eDeleted: cStatus = tskDELETED_CHAR;
+ break;
+
+ default: /* Should not get here, but it is included
+ to prevent static checking errors. */
+ cStatus = 0x00;
+ break;
+ }
+
+ /* Write the task name to the string, padding with spaces so it
+ can be printed in tabular form more easily. */
+ pcWriteBuffer = prvWriteNameToBuffer( pcWriteBuffer, pxTaskStatusArray[ x ].pcTaskName );
+
+ /* Write the rest of the string. */
+ sprintf( pcWriteBuffer, "\t%c\t%u\t%u\t%u\r\n", cStatus, ( unsigned int ) pxTaskStatusArray[ x ].uxCurrentPriority, ( unsigned int ) pxTaskStatusArray[ x ].usStackHighWaterMark, ( unsigned int ) pxTaskStatusArray[ x ].xTaskNumber );
+ pcWriteBuffer += strlen( pcWriteBuffer );
+ }
+
+ /* Free the array again. NOTE! If configSUPPORT_DYNAMIC_ALLOCATION
+ is 0 then vPortFree() will be #defined to nothing. */
+ vPortFree( pxTaskStatusArray );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) ) */
+/*----------------------------------------------------------*/
+
+#if ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+ void vTaskGetRunTimeStats( char *pcWriteBuffer )
+ {
+ TaskStatus_t *pxTaskStatusArray;
+ volatile UBaseType_t uxArraySize, x;
+ uint32_t ulTotalTime, ulStatsAsPercentage;
+
+ #if( configUSE_TRACE_FACILITY != 1 )
+ {
+ #error configUSE_TRACE_FACILITY must also be set to 1 in FreeRTOSConfig.h to use vTaskGetRunTimeStats().
+ }
+ #endif
+
+ /*
+ * PLEASE NOTE:
+ *
+ * This function is provided for convenience only, and is used by many
+ * of the demo applications. Do not consider it to be part of the
+ * scheduler.
+ *
+ * vTaskGetRunTimeStats() calls uxTaskGetSystemState(), then formats part
+ * of the uxTaskGetSystemState() output into a human readable table that
+ * displays the amount of time each task has spent in the Running state
+ * in both absolute and percentage terms.
+ *
+ * vTaskGetRunTimeStats() has a dependency on the sprintf() C library
+ * function that might bloat the code size, use a lot of stack, and
+ * provide different results on different platforms. An alternative,
+ * tiny, third party, and limited functionality implementation of
+ * sprintf() is provided in many of the FreeRTOS/Demo sub-directories in
+ * a file called printf-stdarg.c (note printf-stdarg.c does not provide
+ * a full snprintf() implementation!).
+ *
+ * It is recommended that production systems call uxTaskGetSystemState()
+ * directly to get access to raw stats data, rather than indirectly
+ * through a call to vTaskGetRunTimeStats().
+ */
+
+ /* Make sure the write buffer does not contain a string. */
+ *pcWriteBuffer = 0x00;
+
+ /* Take a snapshot of the number of tasks in case it changes while this
+ function is executing. */
+ uxArraySize = uxCurrentNumberOfTasks;
+
+ /* Allocate an array index for each task. NOTE! If
+ configSUPPORT_DYNAMIC_ALLOCATION is set to 0 then pvPortMalloc() will
+ equate to NULL. */
+ pxTaskStatusArray = pvPortMalloc( uxCurrentNumberOfTasks * sizeof( TaskStatus_t ) );
+
+ if( pxTaskStatusArray != NULL )
+ {
+ /* Generate the (binary) data. */
+ uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, &ulTotalTime );
+
+ /* For percentage calculations. */
+ ulTotalTime /= 100UL;
+
+ /* Avoid divide by zero errors. */
+ if( ulTotalTime > 0 )
+ {
+ /* Create a human readable table from the binary data. */
+ for( x = 0; x < uxArraySize; x++ )
+ {
+ /* What percentage of the total run time has the task used?
+ This will always be rounded down to the nearest integer.
+ ulTotalRunTimeDiv100 has already been divided by 100. */
+ ulStatsAsPercentage = pxTaskStatusArray[ x ].ulRunTimeCounter / ulTotalTime;
+
+ /* Write the task name to the string, padding with
+ spaces so it can be printed in tabular form more
+ easily. */
+ pcWriteBuffer = prvWriteNameToBuffer( pcWriteBuffer, pxTaskStatusArray[ x ].pcTaskName );
+
+ if( ulStatsAsPercentage > 0UL )
+ {
+ #ifdef portLU_PRINTF_SPECIFIER_REQUIRED
+ {
+ sprintf( pcWriteBuffer, "\t%lu\t\t%lu%%\r\n", pxTaskStatusArray[ x ].ulRunTimeCounter, ulStatsAsPercentage );
+ }
+ #else
+ {
+ /* sizeof( int ) == sizeof( long ) so a smaller
+ printf() library can be used. */
+ sprintf( pcWriteBuffer, "\t%u\t\t%u%%\r\n", ( unsigned int ) pxTaskStatusArray[ x ].ulRunTimeCounter, ( unsigned int ) ulStatsAsPercentage );
+ }
+ #endif
+ }
+ else
+ {
+ /* If the percentage is zero here then the task has
+ consumed less than 1% of the total run time. */
+ #ifdef portLU_PRINTF_SPECIFIER_REQUIRED
+ {
+ sprintf( pcWriteBuffer, "\t%lu\t\t<1%%\r\n", pxTaskStatusArray[ x ].ulRunTimeCounter );
+ }
+ #else
+ {
+ /* sizeof( int ) == sizeof( long ) so a smaller
+ printf() library can be used. */
+ sprintf( pcWriteBuffer, "\t%u\t\t<1%%\r\n", ( unsigned int ) pxTaskStatusArray[ x ].ulRunTimeCounter );
+ }
+ #endif
+ }
+
+ pcWriteBuffer += strlen( pcWriteBuffer );
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Free the array again. NOTE! If configSUPPORT_DYNAMIC_ALLOCATION
+ is 0 then vPortFree() will be #defined to nothing. */
+ vPortFree( pxTaskStatusArray );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+#endif /* ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) ) */
+/*-----------------------------------------------------------*/
+
+TickType_t uxTaskResetEventItemValue( void )
+{
+TickType_t uxReturn;
+
+ uxReturn = listGET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ) );
+
+ /* Reset the event list item to its normal value - so it can be used with
+ queues and semaphores. */
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ), ( ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxCurrentTCB->uxPriority ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+ return uxReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+ void *pvTaskIncrementMutexHeldCount( void )
+ {
+ /* If xSemaphoreCreateMutex() is called before any tasks have been created
+ then pxCurrentTCB will be NULL. */
+ if( pxCurrentTCB != NULL )
+ {
+ ( pxCurrentTCB->uxMutexesHeld )++;
+ }
+
+ return pxCurrentTCB;
+ }
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+ uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait )
+ {
+ uint32_t ulReturn;
+
+ taskENTER_CRITICAL();
+ {
+ /* Only block if the notification count is not already non-zero. */
+ if( pxCurrentTCB->ulNotifiedValue == 0UL )
+ {
+ /* Mark this task as waiting for a notification. */
+ pxCurrentTCB->ucNotifyState = taskWAITING_NOTIFICATION;
+
+ if( xTicksToWait > ( TickType_t ) 0 )
+ {
+ prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+ traceTASK_NOTIFY_TAKE_BLOCK();
+
+ /* All ports are written to allow a yield in a critical
+ section (some will yield immediately, others wait until the
+ critical section exits) - but it is not something that
+ application code should ever do. */
+ portYIELD_WITHIN_API();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ taskENTER_CRITICAL();
+ {
+ traceTASK_NOTIFY_TAKE();
+ ulReturn = pxCurrentTCB->ulNotifiedValue;
+
+ if( ulReturn != 0UL )
+ {
+ if( xClearCountOnExit != pdFALSE )
+ {
+ pxCurrentTCB->ulNotifiedValue = 0UL;
+ }
+ else
+ {
+ pxCurrentTCB->ulNotifiedValue = ulReturn - 1;
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ pxCurrentTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+ }
+ taskEXIT_CRITICAL();
+
+ return ulReturn;
+ }
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+ BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait )
+ {
+ BaseType_t xReturn;
+
+ taskENTER_CRITICAL();
+ {
+ /* Only block if a notification is not already pending. */
+ if( pxCurrentTCB->ucNotifyState != taskNOTIFICATION_RECEIVED )
+ {
+ /* Clear bits in the task's notification value as bits may get
+ set by the notifying task or interrupt. This can be used to
+ clear the value to zero. */
+ pxCurrentTCB->ulNotifiedValue &= ~ulBitsToClearOnEntry;
+
+ /* Mark this task as waiting for a notification. */
+ pxCurrentTCB->ucNotifyState = taskWAITING_NOTIFICATION;
+
+ if( xTicksToWait > ( TickType_t ) 0 )
+ {
+ prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+ traceTASK_NOTIFY_WAIT_BLOCK();
+
+ /* All ports are written to allow a yield in a critical
+ section (some will yield immediately, others wait until the
+ critical section exits) - but it is not something that
+ application code should ever do. */
+ portYIELD_WITHIN_API();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ taskENTER_CRITICAL();
+ {
+ traceTASK_NOTIFY_WAIT();
+
+ if( pulNotificationValue != NULL )
+ {
+ /* Output the current notification value, which may or may not
+ have changed. */
+ *pulNotificationValue = pxCurrentTCB->ulNotifiedValue;
+ }
+
+ /* If ucNotifyValue is set then either the task never entered the
+ blocked state (because a notification was already pending) or the
+ task unblocked because of a notification. Otherwise the task
+ unblocked because of a timeout. */
+ if( pxCurrentTCB->ucNotifyState == taskWAITING_NOTIFICATION )
+ {
+ /* A notification was not received. */
+ xReturn = pdFALSE;
+ }
+ else
+ {
+ /* A notification was already pending or a notification was
+ received while the task was waiting. */
+ pxCurrentTCB->ulNotifiedValue &= ~ulBitsToClearOnExit;
+ xReturn = pdTRUE;
+ }
+
+ pxCurrentTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+ }
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+ }
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+ BaseType_t xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue )
+ {
+ TCB_t * pxTCB;
+ BaseType_t xReturn = pdPASS;
+ uint8_t ucOriginalNotifyState;
+
+ configASSERT( xTaskToNotify );
+ pxTCB = ( TCB_t * ) xTaskToNotify;
+
+ taskENTER_CRITICAL();
+ {
+ if( pulPreviousNotificationValue != NULL )
+ {
+ *pulPreviousNotificationValue = pxTCB->ulNotifiedValue;
+ }
+
+ ucOriginalNotifyState = pxTCB->ucNotifyState;
+
+ pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+ switch( eAction )
+ {
+ case eSetBits :
+ pxTCB->ulNotifiedValue |= ulValue;
+ break;
+
+ case eIncrement :
+ ( pxTCB->ulNotifiedValue )++;
+ break;
+
+ case eSetValueWithOverwrite :
+ pxTCB->ulNotifiedValue = ulValue;
+ break;
+
+ case eSetValueWithoutOverwrite :
+ if( ucOriginalNotifyState != taskNOTIFICATION_RECEIVED )
+ {
+ pxTCB->ulNotifiedValue = ulValue;
+ }
+ else
+ {
+ /* The value could not be written to the task. */
+ xReturn = pdFAIL;
+ }
+ break;
+
+ case eNoAction:
+ /* The task is being notified without its notify value being
+ updated. */
+ break;
+ }
+
+ traceTASK_NOTIFY();
+
+ /* If the task is in the blocked state specifically to wait for a
+ notification then unblock it now. */
+ if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+ {
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+ prvAddTaskToReadyList( pxTCB );
+
+ /* The task should not have been on an event list. */
+ configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+ #if( configUSE_TICKLESS_IDLE != 0 )
+ {
+ /* If a task is blocked waiting for a notification then
+ xNextTaskUnblockTime might be set to the blocked task's time
+ out time. If the task is unblocked for a reason other than
+ a timeout xNextTaskUnblockTime is normally left unchanged,
+ because it will automatically get reset to a new value when
+ the tick count equals xNextTaskUnblockTime. However if
+ tickless idling is used it might be more important to enter
+ sleep mode at the earliest possible time - so reset
+ xNextTaskUnblockTime here to ensure it is updated at the
+ earliest possible time. */
+ prvResetNextTaskUnblockTime();
+ }
+ #endif
+
+ if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+ {
+ /* The notified task has a priority above the currently
+ executing task so a yield is required. */
+ taskYIELD_IF_USING_PREEMPTION();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+ }
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+ BaseType_t xTaskGenericNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue, BaseType_t *pxHigherPriorityTaskWoken )
+ {
+ TCB_t * pxTCB;
+ uint8_t ucOriginalNotifyState;
+ BaseType_t xReturn = pdPASS;
+ UBaseType_t uxSavedInterruptStatus;
+
+ configASSERT( xTaskToNotify );
+
+ /* RTOS ports that support interrupt nesting have the concept of a
+ maximum system call (or maximum API call) interrupt priority.
+ Interrupts that are above the maximum system call priority are keep
+ permanently enabled, even when the RTOS kernel is in a critical section,
+ but cannot make any calls to FreeRTOS API functions. If configASSERT()
+ is defined in FreeRTOSConfig.h then
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has
+ been assigned a priority above the configured maximum system call
+ priority. Only FreeRTOS functions that end in FromISR can be called
+ from interrupts that have been assigned a priority at or (logically)
+ below the maximum system call interrupt priority. FreeRTOS maintains a
+ separate interrupt safe API to ensure interrupt entry is as fast and as
+ simple as possible. More information (albeit Cortex-M specific) is
+ provided on the following link:
+ http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ pxTCB = ( TCB_t * ) xTaskToNotify;
+
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ if( pulPreviousNotificationValue != NULL )
+ {
+ *pulPreviousNotificationValue = pxTCB->ulNotifiedValue;
+ }
+
+ ucOriginalNotifyState = pxTCB->ucNotifyState;
+ pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+ switch( eAction )
+ {
+ case eSetBits :
+ pxTCB->ulNotifiedValue |= ulValue;
+ break;
+
+ case eIncrement :
+ ( pxTCB->ulNotifiedValue )++;
+ break;
+
+ case eSetValueWithOverwrite :
+ pxTCB->ulNotifiedValue = ulValue;
+ break;
+
+ case eSetValueWithoutOverwrite :
+ if( ucOriginalNotifyState != taskNOTIFICATION_RECEIVED )
+ {
+ pxTCB->ulNotifiedValue = ulValue;
+ }
+ else
+ {
+ /* The value could not be written to the task. */
+ xReturn = pdFAIL;
+ }
+ break;
+
+ case eNoAction :
+ /* The task is being notified without its notify value being
+ updated. */
+ break;
+ }
+
+ traceTASK_NOTIFY_FROM_ISR();
+
+ /* If the task is in the blocked state specifically to wait for a
+ notification then unblock it now. */
+ if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+ {
+ /* The task should not have been on an event list. */
+ configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+ if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+ {
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+ prvAddTaskToReadyList( pxTCB );
+ }
+ else
+ {
+ /* The delayed and ready lists cannot be accessed, so hold
+ this task pending until the scheduler is resumed. */
+ vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+ }
+
+ if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+ {
+ /* The notified task has a priority above the currently
+ executing task so a yield is required. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ /* Mark that a yield is pending in case the user is not
+ using the "xHigherPriorityTaskWoken" parameter to an ISR
+ safe FreeRTOS function. */
+ xYieldPending = pdTRUE;
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xReturn;
+ }
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+ void vTaskNotifyGiveFromISR( TaskHandle_t xTaskToNotify, BaseType_t *pxHigherPriorityTaskWoken )
+ {
+ TCB_t * pxTCB;
+ uint8_t ucOriginalNotifyState;
+ UBaseType_t uxSavedInterruptStatus;
+
+ configASSERT( xTaskToNotify );
+
+ /* RTOS ports that support interrupt nesting have the concept of a
+ maximum system call (or maximum API call) interrupt priority.
+ Interrupts that are above the maximum system call priority are keep
+ permanently enabled, even when the RTOS kernel is in a critical section,
+ but cannot make any calls to FreeRTOS API functions. If configASSERT()
+ is defined in FreeRTOSConfig.h then
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+ failure if a FreeRTOS API function is called from an interrupt that has
+ been assigned a priority above the configured maximum system call
+ priority. Only FreeRTOS functions that end in FromISR can be called
+ from interrupts that have been assigned a priority at or (logically)
+ below the maximum system call interrupt priority. FreeRTOS maintains a
+ separate interrupt safe API to ensure interrupt entry is as fast and as
+ simple as possible. More information (albeit Cortex-M specific) is
+ provided on the following link:
+ http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+ portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+ pxTCB = ( TCB_t * ) xTaskToNotify;
+
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ ucOriginalNotifyState = pxTCB->ucNotifyState;
+ pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+ /* 'Giving' is equivalent to incrementing a count in a counting
+ semaphore. */
+ ( pxTCB->ulNotifiedValue )++;
+
+ traceTASK_NOTIFY_GIVE_FROM_ISR();
+
+ /* If the task is in the blocked state specifically to wait for a
+ notification then unblock it now. */
+ if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+ {
+ /* The task should not have been on an event list. */
+ configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+ if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+ {
+ ( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+ prvAddTaskToReadyList( pxTCB );
+ }
+ else
+ {
+ /* The delayed and ready lists cannot be accessed, so hold
+ this task pending until the scheduler is resumed. */
+ vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+ }
+
+ if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+ {
+ /* The notified task has a priority above the currently
+ executing task so a yield is required. */
+ if( pxHigherPriorityTaskWoken != NULL )
+ {
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ else
+ {
+ /* Mark that a yield is pending in case the user is not
+ using the "xHigherPriorityTaskWoken" parameter in an ISR
+ safe FreeRTOS function. */
+ xYieldPending = pdTRUE;
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+ }
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+ BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask )
+ {
+ TCB_t *pxTCB;
+ BaseType_t xReturn;
+
+ /* If null is passed in here then it is the calling task that is having
+ its notification state cleared. */
+ pxTCB = prvGetTCBFromHandle( xTask );
+
+ taskENTER_CRITICAL();
+ {
+ if( pxTCB->ucNotifyState == taskNOTIFICATION_RECEIVED )
+ {
+ pxTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+ }
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+
+static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely )
+{
+TickType_t xTimeToWake;
+const TickType_t xConstTickCount = xTickCount;
+
+ #if( INCLUDE_xTaskAbortDelay == 1 )
+ {
+ /* About to enter a delayed list, so ensure the ucDelayAborted flag is
+ reset to pdFALSE so it can be detected as having been set to pdTRUE
+ when the task leaves the Blocked state. */
+ pxCurrentTCB->ucDelayAborted = pdFALSE;
+ }
+ #endif
+
+ /* Remove the task from the ready list before adding it to the blocked list
+ as the same list item is used for both lists. */
+ if( uxListRemove( &( pxCurrentTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+ {
+ /* The current task must be in a ready list, so there is no need to
+ check, and the port reset macro can be called directly. */
+ portRESET_READY_PRIORITY( pxCurrentTCB->uxPriority, uxTopReadyPriority );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ if( ( xTicksToWait == portMAX_DELAY ) && ( xCanBlockIndefinitely != pdFALSE ) )
+ {
+ /* Add the task to the suspended task list instead of a delayed task
+ list to ensure it is not woken by a timing event. It will block
+ indefinitely. */
+ vListInsertEnd( &xSuspendedTaskList, &( pxCurrentTCB->xStateListItem ) );
+ }
+ else
+ {
+ /* Calculate the time at which the task should be woken if the event
+ does not occur. This may overflow but this doesn't matter, the
+ kernel will manage it correctly. */
+ xTimeToWake = xConstTickCount + xTicksToWait;
+
+ /* The list item will be inserted in wake time order. */
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xStateListItem ), xTimeToWake );
+
+ if( xTimeToWake < xConstTickCount )
+ {
+ /* Wake time has overflowed. Place this item in the overflow
+ list. */
+ vListInsert( pxOverflowDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+ }
+ else
+ {
+ /* The wake time has not overflowed, so the current block list
+ is used. */
+ vListInsert( pxDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+
+ /* If the task entering the blocked state was placed at the
+ head of the list of blocked tasks then xNextTaskUnblockTime
+ needs to be updated too. */
+ if( xTimeToWake < xNextTaskUnblockTime )
+ {
+ xNextTaskUnblockTime = xTimeToWake;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ }
+ #else /* INCLUDE_vTaskSuspend */
+ {
+ /* Calculate the time at which the task should be woken if the event
+ does not occur. This may overflow but this doesn't matter, the kernel
+ will manage it correctly. */
+ xTimeToWake = xConstTickCount + xTicksToWait;
+
+ /* The list item will be inserted in wake time order. */
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xStateListItem ), xTimeToWake );
+
+ if( xTimeToWake < xConstTickCount )
+ {
+ /* Wake time has overflowed. Place this item in the overflow list. */
+ vListInsert( pxOverflowDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+ }
+ else
+ {
+ /* The wake time has not overflowed, so the current block list is used. */
+ vListInsert( pxDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+
+ /* If the task entering the blocked state was placed at the head of the
+ list of blocked tasks then xNextTaskUnblockTime needs to be updated
+ too. */
+ if( xTimeToWake < xNextTaskUnblockTime )
+ {
+ xNextTaskUnblockTime = xTimeToWake;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ /* Avoid compiler warning when INCLUDE_vTaskSuspend is not 1. */
+ ( void ) xCanBlockIndefinitely;
+ }
+ #endif /* INCLUDE_vTaskSuspend */
+}
+
+
+#ifdef FREERTOS_MODULE_TEST
+ #include "tasks_test_access_functions.h"
+#endif
+
diff --git a/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/timers.c b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/timers.c
new file mode 100644
index 0000000..d4a821a
--- /dev/null
+++ b/RTOS_IOT/Middlewares/Third_Party/FreeRTOS/Source/timers.c
@@ -0,0 +1,1092 @@
+/*
+ FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+ All rights reserved
+
+ VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+ ***************************************************************************
+ >>! NOTE: The modification to the GPL is included to allow you to !<<
+ >>! distribute a combined work that includes FreeRTOS without being !<<
+ >>! obliged to provide the source code for proprietary components !<<
+ >>! outside of the FreeRTOS kernel. !<<
+ ***************************************************************************
+
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ FOR A PARTICULAR PURPOSE. Full license text is available on the following
+ link: http://www.freertos.org/a00114.html
+
+ ***************************************************************************
+ * *
+ * FreeRTOS provides completely free yet professionally developed, *
+ * robust, strictly quality controlled, supported, and cross *
+ * platform software that is more than just the market leader, it *
+ * is the industry's de facto standard. *
+ * *
+ * Help yourself get started quickly while simultaneously helping *
+ * to support the FreeRTOS project by purchasing a FreeRTOS *
+ * tutorial book, reference manual, or both: *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ ***************************************************************************
+
+ http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
+ the FAQ page "My application does not run, what could be wrong?". Have you
+ defined configASSERT()?
+
+ http://www.FreeRTOS.org/support - In return for receiving this top quality
+ embedded software for free we request you assist our global community by
+ participating in the support forum.
+
+ http://www.FreeRTOS.org/training - Investing in training allows your team to
+ be as productive as possible as early as possible. Now you can receive
+ FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+ Ltd, and the world's leading authority on the world's leading RTOS.
+
+ http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+ including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+ compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+ http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+ Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+ http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+ Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
+ licenses offer ticketed support, indemnification and commercial middleware.
+
+ http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+ engineered and independently SIL3 certified version for use in safety and
+ mission critical applications that require provable dependability.
+
+ 1 tab == 4 spaces!
+*/
+
+/* Standard includes. */
+#include
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers. That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "timers.h"
+
+#if ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 0 )
+ #error configUSE_TIMERS must be set to 1 to make the xTimerPendFunctionCall() function available.
+#endif
+
+/* Lint e961 and e750 are suppressed as a MISRA exception justified because the
+MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined for the
+header files above, but not in this file, in order to generate the correct
+privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750. */
+
+
+/* This entire source file will be skipped if the application is not configured
+to include software timer functionality. This #if is closed at the very bottom
+of this file. If you want to include software timer functionality then ensure
+configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */
+#if ( configUSE_TIMERS == 1 )
+
+/* Misc definitions. */
+#define tmrNO_DELAY ( TickType_t ) 0U
+
+/* The definition of the timers themselves. */
+typedef struct tmrTimerControl
+{
+ const char *pcTimerName; /*<< Text name. This is not used by the kernel, it is included simply to make debugging easier. */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ ListItem_t xTimerListItem; /*<< Standard linked list item as used by all kernel features for event management. */
+ TickType_t xTimerPeriodInTicks;/*<< How quickly and often the timer expires. */
+ UBaseType_t uxAutoReload; /*<< Set to pdTRUE if the timer should be automatically restarted once expired. Set to pdFALSE if the timer is, in effect, a one-shot timer. */
+ void *pvTimerID; /*<< An ID to identify the timer. This allows the timer to be identified when the same callback is used for multiple timers. */
+ TimerCallbackFunction_t pxCallbackFunction; /*<< The function that will be called when the timer expires. */
+ #if( configUSE_TRACE_FACILITY == 1 )
+ UBaseType_t uxTimerNumber; /*<< An ID assigned by trace tools such as FreeRTOS+Trace */
+ #endif
+
+ #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+ uint8_t ucStaticallyAllocated; /*<< Set to pdTRUE if the timer was created statically so no attempt is made to free the memory again if the timer is later deleted. */
+ #endif
+} xTIMER;
+
+/* The old xTIMER name is maintained above then typedefed to the new Timer_t
+name below to enable the use of older kernel aware debuggers. */
+typedef xTIMER Timer_t;
+
+/* The definition of messages that can be sent and received on the timer queue.
+Two types of message can be queued - messages that manipulate a software timer,
+and messages that request the execution of a non-timer related callback. The
+two message types are defined in two separate structures, xTimerParametersType
+and xCallbackParametersType respectively. */
+typedef struct tmrTimerParameters
+{
+ TickType_t xMessageValue; /*<< An optional value used by a subset of commands, for example, when changing the period of a timer. */
+ Timer_t * pxTimer; /*<< The timer to which the command will be applied. */
+} TimerParameter_t;
+
+
+typedef struct tmrCallbackParameters
+{
+ PendedFunction_t pxCallbackFunction; /* << The callback function to execute. */
+ void *pvParameter1; /* << The value that will be used as the callback functions first parameter. */
+ uint32_t ulParameter2; /* << The value that will be used as the callback functions second parameter. */
+} CallbackParameters_t;
+
+/* The structure that contains the two message types, along with an identifier
+that is used to determine which message type is valid. */
+typedef struct tmrTimerQueueMessage
+{
+ BaseType_t xMessageID; /*<< The command being sent to the timer service task. */
+ union
+ {
+ TimerParameter_t xTimerParameters;
+
+ /* Don't include xCallbackParameters if it is not going to be used as
+ it makes the structure (and therefore the timer queue) larger. */
+ #if ( INCLUDE_xTimerPendFunctionCall == 1 )
+ CallbackParameters_t xCallbackParameters;
+ #endif /* INCLUDE_xTimerPendFunctionCall */
+ } u;
+} DaemonTaskMessage_t;
+
+/*lint -e956 A manual analysis and inspection has been used to determine which
+static variables must be declared volatile. */
+
+/* The list in which active timers are stored. Timers are referenced in expire
+time order, with the nearest expiry time at the front of the list. Only the
+timer service task is allowed to access these lists. */
+PRIVILEGED_DATA static List_t xActiveTimerList1;
+PRIVILEGED_DATA static List_t xActiveTimerList2;
+PRIVILEGED_DATA static List_t *pxCurrentTimerList;
+PRIVILEGED_DATA static List_t *pxOverflowTimerList;
+
+/* A queue that is used to send commands to the timer service task. */
+PRIVILEGED_DATA static QueueHandle_t xTimerQueue = NULL;
+PRIVILEGED_DATA static TaskHandle_t xTimerTaskHandle = NULL;
+
+/*lint +e956 */
+
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+ /* If static allocation is supported then the application must provide the
+ following callback function - which enables the application to optionally
+ provide the memory that will be used by the timer task as the task's stack
+ and TCB. */
+ extern void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize );
+
+#endif
+
+/*
+ * Initialise the infrastructure used by the timer service task if it has not
+ * been initialised already.
+ */
+static void prvCheckForValidListAndQueue( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The timer service task (daemon). Timer functionality is controlled by this
+ * task. Other tasks communicate with the timer service task using the
+ * xTimerQueue queue.
+ */
+static void prvTimerTask( void *pvParameters ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called by the timer service task to interpret and process a command it
+ * received on the timer queue.
+ */
+static void prvProcessReceivedCommands( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Insert the timer into either xActiveTimerList1, or xActiveTimerList2,
+ * depending on if the expire time causes a timer counter overflow.
+ */
+static BaseType_t prvInsertTimerInActiveList( Timer_t * const pxTimer, const TickType_t xNextExpiryTime, const TickType_t xTimeNow, const TickType_t xCommandTime ) PRIVILEGED_FUNCTION;
+
+/*
+ * An active timer has reached its expire time. Reload the timer if it is an
+ * auto reload timer, then call its callback.
+ */
+static void prvProcessExpiredTimer( const TickType_t xNextExpireTime, const TickType_t xTimeNow ) PRIVILEGED_FUNCTION;
+
+/*
+ * The tick count has overflowed. Switch the timer lists after ensuring the
+ * current timer list does not still reference some timers.
+ */
+static void prvSwitchTimerLists( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Obtain the current tick count, setting *pxTimerListsWereSwitched to pdTRUE
+ * if a tick count overflow occurred since prvSampleTimeNow() was last called.
+ */
+static TickType_t prvSampleTimeNow( BaseType_t * const pxTimerListsWereSwitched ) PRIVILEGED_FUNCTION;
+
+/*
+ * If the timer list contains any active timers then return the expire time of
+ * the timer that will expire first and set *pxListWasEmpty to false. If the
+ * timer list does not contain any timers then return 0 and set *pxListWasEmpty
+ * to pdTRUE.
+ */
+static TickType_t prvGetNextExpireTime( BaseType_t * const pxListWasEmpty ) PRIVILEGED_FUNCTION;
+
+/*
+ * If a timer has expired, process it. Otherwise, block the timer service task
+ * until either a timer does expire or a command is received.
+ */
+static void prvProcessTimerOrBlockTask( const TickType_t xNextExpireTime, BaseType_t xListWasEmpty ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called after a Timer_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewTimer( const char * const pcTimerName,
+ const TickType_t xTimerPeriodInTicks,
+ const UBaseType_t uxAutoReload,
+ void * const pvTimerID,
+ TimerCallbackFunction_t pxCallbackFunction,
+ Timer_t *pxNewTimer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerCreateTimerTask( void )
+{
+BaseType_t xReturn = pdFAIL;
+
+ /* This function is called when the scheduler is started if
+ configUSE_TIMERS is set to 1. Check that the infrastructure used by the
+ timer service task has been created/initialised. If timers have already
+ been created then the initialisation will already have been performed. */
+ prvCheckForValidListAndQueue();
+
+ if( xTimerQueue != NULL )
+ {
+ #if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ {
+ StaticTask_t *pxTimerTaskTCBBuffer = NULL;
+ StackType_t *pxTimerTaskStackBuffer = NULL;
+ uint32_t ulTimerTaskStackSize;
+
+ vApplicationGetTimerTaskMemory( &pxTimerTaskTCBBuffer, &pxTimerTaskStackBuffer, &ulTimerTaskStackSize );
+ xTimerTaskHandle = xTaskCreateStatic( prvTimerTask,
+ "Tmr Svc",
+ ulTimerTaskStackSize,
+ NULL,
+ ( ( UBaseType_t ) configTIMER_TASK_PRIORITY ) | portPRIVILEGE_BIT,
+ pxTimerTaskStackBuffer,
+ pxTimerTaskTCBBuffer );
+
+ if( xTimerTaskHandle != NULL )
+ {
+ xReturn = pdPASS;
+ }
+ }
+ #else
+ {
+ xReturn = xTaskCreate( prvTimerTask,
+ "Tmr Svc",
+ configTIMER_TASK_STACK_DEPTH,
+ NULL,
+ ( ( UBaseType_t ) configTIMER_TASK_PRIORITY ) | portPRIVILEGE_BIT,
+ &xTimerTaskHandle );
+ }
+ #endif /* configSUPPORT_STATIC_ALLOCATION */
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ configASSERT( xReturn );
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+ TimerHandle_t xTimerCreate( const char * const pcTimerName,
+ const TickType_t xTimerPeriodInTicks,
+ const UBaseType_t uxAutoReload,
+ void * const pvTimerID,
+ TimerCallbackFunction_t pxCallbackFunction ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ {
+ Timer_t *pxNewTimer;
+
+ pxNewTimer = ( Timer_t * ) pvPortMalloc( sizeof( Timer_t ) );
+
+ if( pxNewTimer != NULL )
+ {
+ prvInitialiseNewTimer( pcTimerName, xTimerPeriodInTicks, uxAutoReload, pvTimerID, pxCallbackFunction, pxNewTimer );
+
+ #if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ {
+ /* Timers can be created statically or dynamically, so note this
+ timer was created dynamically in case the timer is later
+ deleted. */
+ pxNewTimer->ucStaticallyAllocated = pdFALSE;
+ }
+ #endif /* configSUPPORT_STATIC_ALLOCATION */
+ }
+
+ return pxNewTimer;
+ }
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+ TimerHandle_t xTimerCreateStatic( const char * const pcTimerName,
+ const TickType_t xTimerPeriodInTicks,
+ const UBaseType_t uxAutoReload,
+ void * const pvTimerID,
+ TimerCallbackFunction_t pxCallbackFunction,
+ StaticTimer_t *pxTimerBuffer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+ {
+ Timer_t *pxNewTimer;
+
+ #if( configASSERT_DEFINED == 1 )
+ {
+ /* Sanity check that the size of the structure used to declare a
+ variable of type StaticTimer_t equals the size of the real timer
+ structures. */
+ volatile size_t xSize = sizeof( StaticTimer_t );
+ configASSERT( xSize == sizeof( Timer_t ) );
+ }
+ #endif /* configASSERT_DEFINED */
+
+ /* A pointer to a StaticTimer_t structure MUST be provided, use it. */
+ configASSERT( pxTimerBuffer );
+ pxNewTimer = ( Timer_t * ) pxTimerBuffer; /*lint !e740 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */
+
+ if( pxNewTimer != NULL )
+ {
+ prvInitialiseNewTimer( pcTimerName, xTimerPeriodInTicks, uxAutoReload, pvTimerID, pxCallbackFunction, pxNewTimer );
+
+ #if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+ {
+ /* Timers can be created statically or dynamically so note this
+ timer was created statically in case it is later deleted. */
+ pxNewTimer->ucStaticallyAllocated = pdTRUE;
+ }
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+ }
+
+ return pxNewTimer;
+ }
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewTimer( const char * const pcTimerName,
+ const TickType_t xTimerPeriodInTicks,
+ const UBaseType_t uxAutoReload,
+ void * const pvTimerID,
+ TimerCallbackFunction_t pxCallbackFunction,
+ Timer_t *pxNewTimer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+ /* 0 is not a valid value for xTimerPeriodInTicks. */
+ configASSERT( ( xTimerPeriodInTicks > 0 ) );
+
+ if( pxNewTimer != NULL )
+ {
+ /* Ensure the infrastructure used by the timer service task has been
+ created/initialised. */
+ prvCheckForValidListAndQueue();
+
+ /* Initialise the timer structure members using the function
+ parameters. */
+ pxNewTimer->pcTimerName = pcTimerName;
+ pxNewTimer->xTimerPeriodInTicks = xTimerPeriodInTicks;
+ pxNewTimer->uxAutoReload = uxAutoReload;
+ pxNewTimer->pvTimerID = pvTimerID;
+ pxNewTimer->pxCallbackFunction = pxCallbackFunction;
+ vListInitialiseItem( &( pxNewTimer->xTimerListItem ) );
+ traceTIMER_CREATE( pxNewTimer );
+ }
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait )
+{
+BaseType_t xReturn = pdFAIL;
+DaemonTaskMessage_t xMessage;
+
+ configASSERT( xTimer );
+
+ /* Send a message to the timer service task to perform a particular action
+ on a particular timer definition. */
+ if( xTimerQueue != NULL )
+ {
+ /* Send a command to the timer service task to start the xTimer timer. */
+ xMessage.xMessageID = xCommandID;
+ xMessage.u.xTimerParameters.xMessageValue = xOptionalValue;
+ xMessage.u.xTimerParameters.pxTimer = ( Timer_t * ) xTimer;
+
+ if( xCommandID < tmrFIRST_FROM_ISR_COMMAND )
+ {
+ if( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
+ {
+ xReturn = xQueueSendToBack( xTimerQueue, &xMessage, xTicksToWait );
+ }
+ else
+ {
+ xReturn = xQueueSendToBack( xTimerQueue, &xMessage, tmrNO_DELAY );
+ }
+ }
+ else
+ {
+ xReturn = xQueueSendToBackFromISR( xTimerQueue, &xMessage, pxHigherPriorityTaskWoken );
+ }
+
+ traceTIMER_COMMAND_SEND( xTimer, xCommandID, xOptionalValue, xReturn );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+TaskHandle_t xTimerGetTimerDaemonTaskHandle( void )
+{
+ /* If xTimerGetTimerDaemonTaskHandle() is called before the scheduler has been
+ started, then xTimerTaskHandle will be NULL. */
+ configASSERT( ( xTimerTaskHandle != NULL ) );
+ return xTimerTaskHandle;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTimerGetPeriod( TimerHandle_t xTimer )
+{
+Timer_t *pxTimer = ( Timer_t * ) xTimer;
+
+ configASSERT( xTimer );
+ return pxTimer->xTimerPeriodInTicks;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer )
+{
+Timer_t * pxTimer = ( Timer_t * ) xTimer;
+TickType_t xReturn;
+
+ configASSERT( xTimer );
+ xReturn = listGET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ) );
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+const char * pcTimerGetName( TimerHandle_t xTimer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+Timer_t *pxTimer = ( Timer_t * ) xTimer;
+
+ configASSERT( xTimer );
+ return pxTimer->pcTimerName;
+}
+/*-----------------------------------------------------------*/
+
+static void prvProcessExpiredTimer( const TickType_t xNextExpireTime, const TickType_t xTimeNow )
+{
+BaseType_t xResult;
+Timer_t * const pxTimer = ( Timer_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );
+
+ /* Remove the timer from the list of active timers. A check has already
+ been performed to ensure the list is not empty. */
+ ( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+ traceTIMER_EXPIRED( pxTimer );
+
+ /* If the timer is an auto reload timer then calculate the next
+ expiry time and re-insert the timer in the list of active timers. */
+ if( pxTimer->uxAutoReload == ( UBaseType_t ) pdTRUE )
+ {
+ /* The timer is inserted into a list using a time relative to anything
+ other than the current time. It will therefore be inserted into the
+ correct list relative to the time this task thinks it is now. */
+ if( prvInsertTimerInActiveList( pxTimer, ( xNextExpireTime + pxTimer->xTimerPeriodInTicks ), xTimeNow, xNextExpireTime ) != pdFALSE )
+ {
+ /* The timer expired before it was added to the active timer
+ list. Reload it now. */
+ xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xNextExpireTime, NULL, tmrNO_DELAY );
+ configASSERT( xResult );
+ ( void ) xResult;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ /* Call the timer callback. */
+ pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+}
+/*-----------------------------------------------------------*/
+
+static void prvTimerTask( void *pvParameters )
+{
+TickType_t xNextExpireTime;
+BaseType_t xListWasEmpty;
+
+ /* Just to avoid compiler warnings. */
+ ( void ) pvParameters;
+
+ #if( configUSE_DAEMON_TASK_STARTUP_HOOK == 1 )
+ {
+ extern void vApplicationDaemonTaskStartupHook( void );
+
+ /* Allow the application writer to execute some code in the context of
+ this task at the point the task starts executing. This is useful if the
+ application includes initialisation code that would benefit from
+ executing after the scheduler has been started. */
+ vApplicationDaemonTaskStartupHook();
+ }
+ #endif /* configUSE_DAEMON_TASK_STARTUP_HOOK */
+
+ for( ;; )
+ {
+ /* Query the timers list to see if it contains any timers, and if so,
+ obtain the time at which the next timer will expire. */
+ xNextExpireTime = prvGetNextExpireTime( &xListWasEmpty );
+
+ /* If a timer has expired, process it. Otherwise, block this task
+ until either a timer does expire, or a command is received. */
+ prvProcessTimerOrBlockTask( xNextExpireTime, xListWasEmpty );
+
+ /* Empty the command queue. */
+ prvProcessReceivedCommands();
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvProcessTimerOrBlockTask( const TickType_t xNextExpireTime, BaseType_t xListWasEmpty )
+{
+TickType_t xTimeNow;
+BaseType_t xTimerListsWereSwitched;
+
+ vTaskSuspendAll();
+ {
+ /* Obtain the time now to make an assessment as to whether the timer
+ has expired or not. If obtaining the time causes the lists to switch
+ then don't process this timer as any timers that remained in the list
+ when the lists were switched will have been processed within the
+ prvSampleTimeNow() function. */
+ xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );
+ if( xTimerListsWereSwitched == pdFALSE )
+ {
+ /* The tick count has not overflowed, has the timer expired? */
+ if( ( xListWasEmpty == pdFALSE ) && ( xNextExpireTime <= xTimeNow ) )
+ {
+ ( void ) xTaskResumeAll();
+ prvProcessExpiredTimer( xNextExpireTime, xTimeNow );
+ }
+ else
+ {
+ /* The tick count has not overflowed, and the next expire
+ time has not been reached yet. This task should therefore
+ block to wait for the next expire time or a command to be
+ received - whichever comes first. The following line cannot
+ be reached unless xNextExpireTime > xTimeNow, except in the
+ case when the current timer list is empty. */
+ if( xListWasEmpty != pdFALSE )
+ {
+ /* The current timer list is empty - is the overflow list
+ also empty? */
+ xListWasEmpty = listLIST_IS_EMPTY( pxOverflowTimerList );
+ }
+
+ vQueueWaitForMessageRestricted( xTimerQueue, ( xNextExpireTime - xTimeNow ), xListWasEmpty );
+
+ if( xTaskResumeAll() == pdFALSE )
+ {
+ /* Yield to wait for either a command to arrive, or the
+ block time to expire. If a command arrived between the
+ critical section being exited and this yield then the yield
+ will not cause the task to block. */
+ portYIELD_WITHIN_API();
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ }
+ else
+ {
+ ( void ) xTaskResumeAll();
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+static TickType_t prvGetNextExpireTime( BaseType_t * const pxListWasEmpty )
+{
+TickType_t xNextExpireTime;
+
+ /* Timers are listed in expiry time order, with the head of the list
+ referencing the task that will expire first. Obtain the time at which
+ the timer with the nearest expiry time will expire. If there are no
+ active timers then just set the next expire time to 0. That will cause
+ this task to unblock when the tick count overflows, at which point the
+ timer lists will be switched and the next expiry time can be
+ re-assessed. */
+ *pxListWasEmpty = listLIST_IS_EMPTY( pxCurrentTimerList );
+ if( *pxListWasEmpty == pdFALSE )
+ {
+ xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );
+ }
+ else
+ {
+ /* Ensure the task unblocks when the tick count rolls over. */
+ xNextExpireTime = ( TickType_t ) 0U;
+ }
+
+ return xNextExpireTime;
+}
+/*-----------------------------------------------------------*/
+
+static TickType_t prvSampleTimeNow( BaseType_t * const pxTimerListsWereSwitched )
+{
+TickType_t xTimeNow;
+PRIVILEGED_DATA static TickType_t xLastTime = ( TickType_t ) 0U; /*lint !e956 Variable is only accessible to one task. */
+
+ xTimeNow = xTaskGetTickCount();
+
+ if( xTimeNow < xLastTime )
+ {
+ prvSwitchTimerLists();
+ *pxTimerListsWereSwitched = pdTRUE;
+ }
+ else
+ {
+ *pxTimerListsWereSwitched = pdFALSE;
+ }
+
+ xLastTime = xTimeNow;
+
+ return xTimeNow;
+}
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvInsertTimerInActiveList( Timer_t * const pxTimer, const TickType_t xNextExpiryTime, const TickType_t xTimeNow, const TickType_t xCommandTime )
+{
+BaseType_t xProcessTimerNow = pdFALSE;
+
+ listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xNextExpiryTime );
+ listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );
+
+ if( xNextExpiryTime <= xTimeNow )
+ {
+ /* Has the expiry time elapsed between the command to start/reset a
+ timer was issued, and the time the command was processed? */
+ if( ( ( TickType_t ) ( xTimeNow - xCommandTime ) ) >= pxTimer->xTimerPeriodInTicks ) /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+ {
+ /* The time between a command being issued and the command being
+ processed actually exceeds the timers period. */
+ xProcessTimerNow = pdTRUE;
+ }
+ else
+ {
+ vListInsert( pxOverflowTimerList, &( pxTimer->xTimerListItem ) );
+ }
+ }
+ else
+ {
+ if( ( xTimeNow < xCommandTime ) && ( xNextExpiryTime >= xCommandTime ) )
+ {
+ /* If, since the command was issued, the tick count has overflowed
+ but the expiry time has not, then the timer must have already passed
+ its expiry time and should be processed immediately. */
+ xProcessTimerNow = pdTRUE;
+ }
+ else
+ {
+ vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );
+ }
+ }
+
+ return xProcessTimerNow;
+}
+/*-----------------------------------------------------------*/
+
+static void prvProcessReceivedCommands( void )
+{
+DaemonTaskMessage_t xMessage;
+Timer_t *pxTimer;
+BaseType_t xTimerListsWereSwitched, xResult;
+TickType_t xTimeNow;
+
+ while( xQueueReceive( xTimerQueue, &xMessage, tmrNO_DELAY ) != pdFAIL ) /*lint !e603 xMessage does not have to be initialised as it is passed out, not in, and it is not used unless xQueueReceive() returns pdTRUE. */
+ {
+ #if ( INCLUDE_xTimerPendFunctionCall == 1 )
+ {
+ /* Negative commands are pended function calls rather than timer
+ commands. */
+ if( xMessage.xMessageID < ( BaseType_t ) 0 )
+ {
+ const CallbackParameters_t * const pxCallback = &( xMessage.u.xCallbackParameters );
+
+ /* The timer uses the xCallbackParameters member to request a
+ callback be executed. Check the callback is not NULL. */
+ configASSERT( pxCallback );
+
+ /* Call the function. */
+ pxCallback->pxCallbackFunction( pxCallback->pvParameter1, pxCallback->ulParameter2 );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* INCLUDE_xTimerPendFunctionCall */
+
+ /* Commands that are positive are timer commands rather than pended
+ function calls. */
+ if( xMessage.xMessageID >= ( BaseType_t ) 0 )
+ {
+ /* The messages uses the xTimerParameters member to work on a
+ software timer. */
+ pxTimer = xMessage.u.xTimerParameters.pxTimer;
+
+ if( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) == pdFALSE )
+ {
+ /* The timer is in a list, remove it. */
+ ( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+
+ traceTIMER_COMMAND_RECEIVED( pxTimer, xMessage.xMessageID, xMessage.u.xTimerParameters.xMessageValue );
+
+ /* In this case the xTimerListsWereSwitched parameter is not used, but
+ it must be present in the function call. prvSampleTimeNow() must be
+ called after the message is received from xTimerQueue so there is no
+ possibility of a higher priority task adding a message to the message
+ queue with a time that is ahead of the timer daemon task (because it
+ pre-empted the timer daemon task after the xTimeNow value was set). */
+ xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );
+
+ switch( xMessage.xMessageID )
+ {
+ case tmrCOMMAND_START :
+ case tmrCOMMAND_START_FROM_ISR :
+ case tmrCOMMAND_RESET :
+ case tmrCOMMAND_RESET_FROM_ISR :
+ case tmrCOMMAND_START_DONT_TRACE :
+ /* Start or restart a timer. */
+ if( prvInsertTimerInActiveList( pxTimer, xMessage.u.xTimerParameters.xMessageValue + pxTimer->xTimerPeriodInTicks, xTimeNow, xMessage.u.xTimerParameters.xMessageValue ) != pdFALSE )
+ {
+ /* The timer expired before it was added to the active
+ timer list. Process it now. */
+ pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+ traceTIMER_EXPIRED( pxTimer );
+
+ if( pxTimer->uxAutoReload == ( UBaseType_t ) pdTRUE )
+ {
+ xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xMessage.u.xTimerParameters.xMessageValue + pxTimer->xTimerPeriodInTicks, NULL, tmrNO_DELAY );
+ configASSERT( xResult );
+ ( void ) xResult;
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ break;
+
+ case tmrCOMMAND_STOP :
+ case tmrCOMMAND_STOP_FROM_ISR :
+ /* The timer has already been removed from the active list.
+ There is nothing to do here. */
+ break;
+
+ case tmrCOMMAND_CHANGE_PERIOD :
+ case tmrCOMMAND_CHANGE_PERIOD_FROM_ISR :
+ pxTimer->xTimerPeriodInTicks = xMessage.u.xTimerParameters.xMessageValue;
+ configASSERT( ( pxTimer->xTimerPeriodInTicks > 0 ) );
+
+ /* The new period does not really have a reference, and can
+ be longer or shorter than the old one. The command time is
+ therefore set to the current time, and as the period cannot
+ be zero the next expiry time can only be in the future,
+ meaning (unlike for the xTimerStart() case above) there is
+ no fail case that needs to be handled here. */
+ ( void ) prvInsertTimerInActiveList( pxTimer, ( xTimeNow + pxTimer->xTimerPeriodInTicks ), xTimeNow, xTimeNow );
+ break;
+
+ case tmrCOMMAND_DELETE :
+ /* The timer has already been removed from the active list,
+ just free up the memory if the memory was dynamically
+ allocated. */
+ #if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) )
+ {
+ /* The timer can only have been allocated dynamically -
+ free it again. */
+ vPortFree( pxTimer );
+ }
+ #elif( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+ {
+ /* The timer could have been allocated statically or
+ dynamically, so check before attempting to free the
+ memory. */
+ if( pxTimer->ucStaticallyAllocated == ( uint8_t ) pdFALSE )
+ {
+ vPortFree( pxTimer );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+ break;
+
+ default :
+ /* Don't expect to get here. */
+ break;
+ }
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvSwitchTimerLists( void )
+{
+TickType_t xNextExpireTime, xReloadTime;
+List_t *pxTemp;
+Timer_t *pxTimer;
+BaseType_t xResult;
+
+ /* The tick count has overflowed. The timer lists must be switched.
+ If there are any timers still referenced from the current timer list
+ then they must have expired and should be processed before the lists
+ are switched. */
+ while( listLIST_IS_EMPTY( pxCurrentTimerList ) == pdFALSE )
+ {
+ xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );
+
+ /* Remove the timer from the list. */
+ pxTimer = ( Timer_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );
+ ( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+ traceTIMER_EXPIRED( pxTimer );
+
+ /* Execute its callback, then send a command to restart the timer if
+ it is an auto-reload timer. It cannot be restarted here as the lists
+ have not yet been switched. */
+ pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+
+ if( pxTimer->uxAutoReload == ( UBaseType_t ) pdTRUE )
+ {
+ /* Calculate the reload value, and if the reload value results in
+ the timer going into the same timer list then it has already expired
+ and the timer should be re-inserted into the current list so it is
+ processed again within this loop. Otherwise a command should be sent
+ to restart the timer to ensure it is only inserted into a list after
+ the lists have been swapped. */
+ xReloadTime = ( xNextExpireTime + pxTimer->xTimerPeriodInTicks );
+ if( xReloadTime > xNextExpireTime )
+ {
+ listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xReloadTime );
+ listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );
+ vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );
+ }
+ else
+ {
+ xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xNextExpireTime, NULL, tmrNO_DELAY );
+ configASSERT( xResult );
+ ( void ) xResult;
+ }
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+
+ pxTemp = pxCurrentTimerList;
+ pxCurrentTimerList = pxOverflowTimerList;
+ pxOverflowTimerList = pxTemp;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCheckForValidListAndQueue( void )
+{
+ /* Check that the list from which active timers are referenced, and the
+ queue used to communicate with the timer service, have been
+ initialised. */
+ taskENTER_CRITICAL();
+ {
+ if( xTimerQueue == NULL )
+ {
+ vListInitialise( &xActiveTimerList1 );
+ vListInitialise( &xActiveTimerList2 );
+ pxCurrentTimerList = &xActiveTimerList1;
+ pxOverflowTimerList = &xActiveTimerList2;
+
+ #if( configSUPPORT_STATIC_ALLOCATION == 1 )
+ {
+ /* The timer queue is allocated statically in case
+ configSUPPORT_DYNAMIC_ALLOCATION is 0. */
+ static StaticQueue_t xStaticTimerQueue;
+ static uint8_t ucStaticTimerQueueStorage[ configTIMER_QUEUE_LENGTH * sizeof( DaemonTaskMessage_t ) ];
+
+ xTimerQueue = xQueueCreateStatic( ( UBaseType_t ) configTIMER_QUEUE_LENGTH, sizeof( DaemonTaskMessage_t ), &( ucStaticTimerQueueStorage[ 0 ] ), &xStaticTimerQueue );
+ }
+ #else
+ {
+ xTimerQueue = xQueueCreate( ( UBaseType_t ) configTIMER_QUEUE_LENGTH, sizeof( DaemonTaskMessage_t ) );
+ }
+ #endif
+
+ #if ( configQUEUE_REGISTRY_SIZE > 0 )
+ {
+ if( xTimerQueue != NULL )
+ {
+ vQueueAddToRegistry( xTimerQueue, "TmrQ" );
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ #endif /* configQUEUE_REGISTRY_SIZE */
+ }
+ else
+ {
+ mtCOVERAGE_TEST_MARKER();
+ }
+ }
+ taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer )
+{
+BaseType_t xTimerIsInActiveList;
+Timer_t *pxTimer = ( Timer_t * ) xTimer;
+
+ configASSERT( xTimer );
+
+ /* Is the timer in the list of active timers? */
+ taskENTER_CRITICAL();
+ {
+ /* Checking to see if it is in the NULL list in effect checks to see if
+ it is referenced from either the current or the overflow timer lists in
+ one go, but the logic has to be reversed, hence the '!'. */
+ xTimerIsInActiveList = ( BaseType_t ) !( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) );
+ }
+ taskEXIT_CRITICAL();
+
+ return xTimerIsInActiveList;
+} /*lint !e818 Can't be pointer to const due to the typedef. */
+/*-----------------------------------------------------------*/
+
+void *pvTimerGetTimerID( const TimerHandle_t xTimer )
+{
+Timer_t * const pxTimer = ( Timer_t * ) xTimer;
+void *pvReturn;
+
+ configASSERT( xTimer );
+
+ taskENTER_CRITICAL();
+ {
+ pvReturn = pxTimer->pvTimerID;
+ }
+ taskEXIT_CRITICAL();
+
+ return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID )
+{
+Timer_t * const pxTimer = ( Timer_t * ) xTimer;
+
+ configASSERT( xTimer );
+
+ taskENTER_CRITICAL();
+ {
+ pxTimer->pvTimerID = pvNewID;
+ }
+ taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+#if( INCLUDE_xTimerPendFunctionCall == 1 )
+
+ BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, BaseType_t *pxHigherPriorityTaskWoken )
+ {
+ DaemonTaskMessage_t xMessage;
+ BaseType_t xReturn;
+
+ /* Complete the message with the function parameters and post it to the
+ daemon task. */
+ xMessage.xMessageID = tmrCOMMAND_EXECUTE_CALLBACK_FROM_ISR;
+ xMessage.u.xCallbackParameters.pxCallbackFunction = xFunctionToPend;
+ xMessage.u.xCallbackParameters.pvParameter1 = pvParameter1;
+ xMessage.u.xCallbackParameters.ulParameter2 = ulParameter2;
+
+ xReturn = xQueueSendFromISR( xTimerQueue, &xMessage, pxHigherPriorityTaskWoken );
+
+ tracePEND_FUNC_CALL_FROM_ISR( xFunctionToPend, pvParameter1, ulParameter2, xReturn );
+
+ return xReturn;
+ }
+
+#endif /* INCLUDE_xTimerPendFunctionCall */
+/*-----------------------------------------------------------*/
+
+#if( INCLUDE_xTimerPendFunctionCall == 1 )
+
+ BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait )
+ {
+ DaemonTaskMessage_t xMessage;
+ BaseType_t xReturn;
+
+ /* This function can only be called after a timer has been created or
+ after the scheduler has been started because, until then, the timer
+ queue does not exist. */
+ configASSERT( xTimerQueue );
+
+ /* Complete the message with the function parameters and post it to the
+ daemon task. */
+ xMessage.xMessageID = tmrCOMMAND_EXECUTE_CALLBACK;
+ xMessage.u.xCallbackParameters.pxCallbackFunction = xFunctionToPend;
+ xMessage.u.xCallbackParameters.pvParameter1 = pvParameter1;
+ xMessage.u.xCallbackParameters.ulParameter2 = ulParameter2;
+
+ xReturn = xQueueSendToBack( xTimerQueue, &xMessage, xTicksToWait );
+
+ tracePEND_FUNC_CALL( xFunctionToPend, pvParameter1, ulParameter2, xReturn );
+
+ return xReturn;
+ }
+
+#endif /* INCLUDE_xTimerPendFunctionCall */
+/*-----------------------------------------------------------*/
+
+/* This entire source file will be skipped if the application is not configured
+to include software timer functionality. If you want to include software timer
+functionality then ensure configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */
+#endif /* configUSE_TIMERS == 1 */
+
+
+
diff --git a/RTOS_IOT/NUCLEO-L053R8.xml b/RTOS_IOT/NUCLEO-L053R8.xml
new file mode 100644
index 0000000..024b465
--- /dev/null
+++ b/RTOS_IOT/NUCLEO-L053R8.xml
@@ -0,0 +1,19 @@
+
+
+
+
+
+
+
+
+]>
+
+
+
+ NUCLEO-L053R8
+ SWD
+ ST-Link
+ stm32l053r8tx
+
+
diff --git a/RTOS_IOT/Output data.png b/RTOS_IOT/Output data.png
new file mode 100644
index 0000000..4bdde12
Binary files /dev/null and b/RTOS_IOT/Output data.png differ
diff --git a/RTOS_IOT/RTOS_IOT Debug.cfg b/RTOS_IOT/RTOS_IOT Debug.cfg
new file mode 100644
index 0000000..f195cc1
--- /dev/null
+++ b/RTOS_IOT/RTOS_IOT Debug.cfg
@@ -0,0 +1,28 @@
+# This is an NUCLEO-L053R8 board with a single STM32L053R8Tx chip
+#
+# Generated by System Workbench for STM32
+# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s)
+
+source [find interface/stlink.cfg]
+
+set WORKAREASIZE 0x2000
+
+transport select "hla_swd"
+
+set CHIPNAME STM32L053R8Tx
+
+# Enable debug when in low power modes
+set ENABLE_LOW_POWER 1
+
+# Stop Watchdog counters when halt
+set STOP_WATCHDOG 1
+
+# STlink Debug clock frequency
+set CLOCK_FREQ 4000
+
+# use hardware reset, connect under reset
+# connect_assert_srst needed if low power mode application running (WFI...)
+reset_config srst_only srst_nogate connect_assert_srst
+set CONNECT_UNDER_RESET 1
+
+source [find target/stm32l0x.cfg]
diff --git a/RTOS_IOT/RTOS_IOT.ioc b/RTOS_IOT/RTOS_IOT.ioc
new file mode 100644
index 0000000..93247c0
--- /dev/null
+++ b/RTOS_IOT/RTOS_IOT.ioc
@@ -0,0 +1,170 @@
+#MicroXplorer Configuration settings - do not modify
+FREERTOS.IPParameters=Tasks01
+FREERTOS.Tasks01=defaultTask,0,128,StartDefaultTask,Default,NULL
+File.Version=6
+KeepUserPlacement=true
+Mcu.Family=STM32L0
+Mcu.IP0=FREERTOS
+Mcu.IP1=I2C1
+Mcu.IP2=NVIC
+Mcu.IP3=RCC
+Mcu.IP4=RTC
+Mcu.IP5=SYS
+Mcu.IP6=USART1
+Mcu.IP7=USART2
+Mcu.IPNb=8
+Mcu.Name=STM32L053R(6-8)Tx
+Mcu.Package=LQFP64
+Mcu.Pin0=PC13
+Mcu.Pin1=PC14-OSC32_IN
+Mcu.Pin10=PA13
+Mcu.Pin11=PA14
+Mcu.Pin12=PB8
+Mcu.Pin13=PB9
+Mcu.Pin14=VP_FREERTOS_VS_ENABLE
+Mcu.Pin15=VP_RTC_VS_RTC_Activate
+Mcu.Pin16=VP_RTC_VS_RTC_Calendar
+Mcu.Pin17=VP_SYS_VS_Systick
+Mcu.Pin2=PC15-OSC32_OUT
+Mcu.Pin3=PH0-OSC_IN
+Mcu.Pin4=PH1-OSC_OUT
+Mcu.Pin5=PA2
+Mcu.Pin6=PA3
+Mcu.Pin7=PA5
+Mcu.Pin8=PA9
+Mcu.Pin9=PA10
+Mcu.PinsNb=18
+Mcu.UserConstants=
+Mcu.UserName=STM32L053R8Tx
+MxCube.Version=4.20.1
+MxDb.Version=DB.4.0.200
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:false\:false
+NVIC.PendSV_IRQn=true\:3\:0\:false\:false\:false\:true
+NVIC.SVC_IRQn=true\:0\:0\:false\:false\:false\:false
+NVIC.SysTick_IRQn=true\:3\:0\:true\:false\:true\:true
+PA10.Mode=IrDA
+PA10.Signal=USART1_RX
+PA13.GPIOParameters=GPIO_Label
+PA13.GPIO_Label=TMS
+PA13.Locked=true
+PA13.Signal=SYS_SWDIO
+PA14.GPIOParameters=GPIO_Label
+PA14.GPIO_Label=TCK
+PA14.Locked=true
+PA14.Signal=SYS_SWCLK
+PA2.GPIOParameters=GPIO_Label
+PA2.GPIO_Label=USART_TX
+PA2.Locked=true
+PA2.Mode=Asynchronous
+PA2.Signal=USART2_TX
+PA3.GPIOParameters=GPIO_Label
+PA3.GPIO_Label=USART_RX
+PA3.Locked=true
+PA3.Mode=Asynchronous
+PA3.Signal=USART2_RX
+PA5.GPIOParameters=GPIO_Label
+PA5.GPIO_Label=LD2 [Green Led]
+PA5.Locked=true
+PA5.Signal=GPIO_Output
+PA9.Mode=IrDA
+PA9.Signal=USART1_TX
+PB8.Locked=true
+PB8.Mode=I2C
+PB8.Signal=I2C1_SCL
+PB9.Locked=true
+PB9.Mode=I2C
+PB9.Signal=I2C1_SDA
+PC13.GPIOParameters=GPIO_Label,GPIO_ModeDefaultEXTI
+PC13.GPIO_Label=B1 [Blue PushButton]
+PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING
+PC13.Locked=true
+PC13.Signal=GPXTI13
+PC14-OSC32_IN.Locked=true
+PC14-OSC32_IN.Signal=RCC_OSC32_IN
+PC15-OSC32_OUT.Locked=true
+PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
+PCC.Checker=true
+PCC.Line=STM32L0x3
+PCC.MCU=STM32L053R(6-8)Tx
+PCC.MXVersion=4.20.1
+PCC.PartNumber=STM32L053R8Tx
+PCC.Seq0=0
+PCC.Series=STM32L0
+PCC.Temperature=25
+PCC.Vdd=null
+PH0-OSC_IN.Locked=true
+PH0-OSC_IN.Signal=RCC_OSC_IN
+PH1-OSC_OUT.Locked=true
+PH1-OSC_OUT.Signal=RCC_OSC_OUT
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=2
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=C\:/Users/pt/STM32Cube/Repository/STM32Cube_FW_L0_V1.9.0
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32L053R8Tx
+ProjectManager.FirmwarePackage=STM32Cube FW_L0 V1.9.0
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=1
+ProjectManager.PreviousToolchain=SW4STM32
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=Testing.ioc
+ProjectManager.ProjectName=Testing
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=SW4STM32
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL,2-SystemClock_Config-RCC-false-HAL,3-MX_RTC_Init-RTC-false-HAL,4-MX_USART2_UART_Init-USART2-false-HAL,5-MX_USART1_IRDA_Init-USART1-false-HAL,6-MX_I2C1_Init-I2C1-false-HAL
+RCC.48CLKFreq_Value=24000000
+RCC.AHBFreq_Value=2097000
+RCC.APB1Freq_Value=2097000
+RCC.APB1TimFreq_Value=2097000
+RCC.APB2Freq_Value=2097000
+RCC.APB2TimFreq_Value=2097000
+RCC.FamilyName=M
+RCC.HSE_VALUE=8000000
+RCC.HSI16_VALUE=16000000
+RCC.HSI48_VALUE=48000000
+RCC.HSI_VALUE=16000000
+RCC.I2C1Freq_Value=2097000
+RCC.IPParameters=48CLKFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FamilyName,HSE_VALUE,HSI16_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,LCDFreq_Value,LPTIMFreq_Value,LPUARTFreq_Value,LSEState,LSE_VALUE,LSI_VALUE,MSI_VALUE,PLLCLKFreq_Value,PWRFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,TIMFreq_Value,USART1Freq_Value,USART2Freq_Value,VCOOutputFreq_Value,WatchDogFreq_Value
+RCC.LCDFreq_Value=37000
+RCC.LPTIMFreq_Value=2097000
+RCC.LPUARTFreq_Value=2097000
+RCC.LSEState=RCC_LSE_ON
+RCC.LSE_VALUE=32768
+RCC.LSI_VALUE=37000
+RCC.MSI_VALUE=2097000
+RCC.PLLCLKFreq_Value=24000000
+RCC.PWRFreq_Value=2097000
+RCC.RTCFreq_Value=37000
+RCC.RTCHSEDivFreq_Value=4000000
+RCC.SYSCLKFreq_VALUE=2097000
+RCC.TIMFreq_Value=2097000
+RCC.USART1Freq_Value=2097000
+RCC.USART2Freq_Value=2097000
+RCC.VCOOutputFreq_Value=48000000
+RCC.WatchDogFreq_Value=37000
+SH.GPXTI13.0=GPIO_EXTI13
+SH.GPXTI13.ConfNb=1
+USART1.IPParameters=VirtualMode-IrDA
+USART1.VirtualMode-IrDA=VM_IRDA
+USART2.IPParameters=VirtualMode-Asynchronous
+USART2.VirtualMode-Asynchronous=VM_ASYNC
+VP_FREERTOS_VS_ENABLE.Mode=Enabled
+VP_FREERTOS_VS_ENABLE.Signal=FREERTOS_VS_ENABLE
+VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
+VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
+VP_RTC_VS_RTC_Calendar.Mode=RTC_Calendar
+VP_RTC_VS_RTC_Calendar.Signal=RTC_VS_RTC_Calendar
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=NUCLEO-L053R8
+boardIOC=true
diff --git a/RTOS_IOT/STM32L053R8Tx_FLASH.ld b/RTOS_IOT/STM32L053R8Tx_FLASH.ld
new file mode 100644
index 0000000..c4cd5b2
--- /dev/null
+++ b/RTOS_IOT/STM32L053R8Tx_FLASH.ld
@@ -0,0 +1,188 @@
+/*
+*****************************************************************************
+**
+
+** File : LinkerScript.ld
+**
+** Abstract : Linker script for STM32L053R8Tx Device with
+** 64KByte FLASH, 8KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+**
+** Distribution: The file is distributed as is, without any warranty
+** of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** © COPYRIGHT(c) 2014 Ac6
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+** 1. Redistributions of source code must retain the above copyright notice,
+** this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright notice,
+** this list of conditions and the following disclaimer in the documentation
+** and/or other materials provided with the distribution.
+** 3. Neither the name of Ac6 nor the names of its contributors
+** may be used to endorse or promote products derived from this software
+** without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20002000; /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
+FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM
+
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+
diff --git a/RTOS_IOT/Src/Debug_led.c b/RTOS_IOT/Src/Debug_led.c
new file mode 100644
index 0000000..e4e0377
--- /dev/null
+++ b/RTOS_IOT/Src/Debug_led.c
@@ -0,0 +1,149 @@
+#include "debug_led.h"
+
+
+#ifdef USE_CMSIS_FREERTOS
+
+ #include "cmsis_os.h"
+ osThreadId taskLED_HEARTBEAT;
+
+#else
+
+ typedef enum {
+ StartCycle,
+ Systolic,
+ Systolic_rest,
+ diastolic,
+ diastolic_rest,
+ }eCardiacCycle;
+
+ static uint32_t NextCycleTime = 0;
+ static eCardiacCycle LEDCycle = StartCycle;
+
+#endif
+
+#ifdef TESTING_IN_RTOS
+ #include "cmsis_os.h"
+ osThreadId taskLED_HEARTBEAT;
+#endif
+
+
+static GPIO_TypeDef* PortLED;
+static uint32_t LED_PIN;
+
+
+
+void HeartBeat_LED_Init (GPIO_TypeDef * LED_Port , GPIO_InitTypeDef * GPIO){
+
+ PortLED = LED_Port;
+ LED_PIN = GPIO->Pin;
+
+ HAL_GPIO_Init(LED_Port, GPIO);
+
+#ifdef USE_CMSIS_FREERTOS
+
+ osThreadDef(HeartBeat, LED_HeartBeat, osPriorityNormal, 0 , configMINIMAL_STACK_SIZE);
+ taskLED_HEARTBEAT = osThreadCreate(osThread(HeartBeat),NULL);
+
+#endif
+
+#ifdef TESTING_IN_RTOS
+ osThreadDef(HeartBeat, LED_HeartBeat, osPriorityNormal, 0 , configMINIMAL_STACK_SIZE);
+ taskLED_HEARTBEAT = osThreadCreate(osThread(HeartBeat),NULL);
+#endif
+
+
+}
+
+
+
+void LED_HeartBeat (void const * argument){
+
+#ifdef USE_CMSIS_FREERTOS
+ uint32_t xLastTickWakeup = osKernelSysTick();
+
+ for(;;)
+ {
+ HAL_GPIO_TogglePin(PortLED, LED_PIN);
+#ifdef INCLUDE_vTaskDelayUntil
+ osDelayUntil(&xLastTickWakeup,220);
+#else
+ osDelay(220);
+#endif
+ HAL_GPIO_TogglePin(PortLED, LED_PIN);
+#ifdef INCLUDE_vTaskDelayUntil
+ osDelayUntil(&xLastTickWakeup,320);
+#else
+ osDelay(320);
+#endif
+ HAL_GPIO_TogglePin(PortLED, LED_PIN);
+#ifdef INCLUDE_vTaskDelayUntil
+ osDelayUntil(&xLastTickWakeup,220);
+#else
+ osDelay(220);
+#endif
+ HAL_GPIO_TogglePin(PortLED, LED_PIN);
+#ifdef INCLUDE_vTaskDelayUntil
+ osDelayUntil(&xLastTickWakeup,1240);
+#else
+ osDelay(1240);
+#endif
+
+ }
+#else
+#ifdef TESTING_IN_RTOS
+
+ for(;;){
+
+#endif
+
+ switch (LEDCycle){
+ case StartCycle:
+ NextCycleTime = HAL_GetTick() + 220;
+ LEDCycle = Systolic;
+ HAL_GPIO_WritePin(PortLED, LED_PIN, GPIO_PIN_SET);
+ break;
+
+ case Systolic:
+ if (HAL_GetTick() >= NextCycleTime){
+ NextCycleTime = HAL_GetTick() + 320;
+ LEDCycle++;
+ HAL_GPIO_WritePin(PortLED, LED_PIN, GPIO_PIN_RESET);
+ }
+ break;
+
+ case Systolic_rest:
+ if (HAL_GetTick() >= NextCycleTime){
+ NextCycleTime = HAL_GetTick() + 220;
+ LEDCycle++;
+ HAL_GPIO_WritePin(PortLED, LED_PIN, GPIO_PIN_SET);
+ }
+ break;
+
+ case diastolic:
+ if (HAL_GetTick() >= NextCycleTime){
+ NextCycleTime = HAL_GetTick() + 1240;
+ LEDCycle++;
+ HAL_GPIO_WritePin(PortLED, LED_PIN, GPIO_PIN_RESET);
+ }
+ break;
+
+ case diastolic_rest:
+ if (HAL_GetTick() >= NextCycleTime){
+ NextCycleTime = HAL_GetTick() + 220;
+ LEDCycle = Systolic ;
+ HAL_GPIO_WritePin(PortLED, LED_PIN, GPIO_PIN_SET);
+ }
+ break;
+
+ default:
+ break;
+ }
+
+#ifdef TESTING_IN_RTOS
+
+}
+
+#endif
+
+#endif
+}
diff --git a/RTOS_IOT/Src/HTS221.c b/RTOS_IOT/Src/HTS221.c
new file mode 100644
index 0000000..a3929e3
--- /dev/null
+++ b/RTOS_IOT/Src/HTS221.c
@@ -0,0 +1,145 @@
+/*
+ * HTS221.c
+ *
+ * Created on: Oct 14, 2017
+ * Author: pt
+ */
+
+#include "main.h"
+#include "HTS221.h"
+
+#define readI2c HTS221_I2C_Read_return
+
+struct {
+ uint8_t _H0_rH_x2;
+ uint8_t _H1_rH_x2;
+ uint16_t _T0_degC_x8;
+ uint16_t _T1_degC_x8;
+ int16_t _H0_T0_OUT;
+ int16_t _H1_T0_OUT;
+ int16_t _T0_OUT;
+ int16_t _T1_OUT;
+}HTS221_CoefStruc;
+
+I2C_HandleTypeDef * HTS221_I2CHander;
+
+static uint8_t HTS221_I2C_Read_return (uint8_t MemAddress);
+static void HTS221_I2C_Read (uint8_t MemAddress, uint8_t* dat, uint8_t items);
+static void HTS221_I2C_Write(uint8_t MemAddress, uint8_t* dat, uint8_t items);
+
+static bool HTS221_CheckAvailable (void);
+static void HTS221_EnableDevice (void);
+static void HTS221_GetCoefficient (void);
+
+
+static uint8_t HTS221_I2C_Read_return (uint8_t MemAddress){
+ uint8_t dat = 0;
+ HTS221_I2C_Read(MemAddress,&dat,1);
+ return dat;
+}
+
+static void HTS221_I2C_Read (uint8_t MemAddress, uint8_t* dat, uint8_t items){
+ HAL_I2C_Mem_Read(HTS221_I2CHander,HTS221_DevAddr, MemAddress, I2C_MEMADD_SIZE_8BIT,dat,items,items*2);
+}
+
+static void HTS221_I2C_Write(uint8_t MemAddress, uint8_t* dat, uint8_t items){
+ HAL_I2C_Mem_Write(HTS221_I2CHander,HTS221_DevAddr, MemAddress, I2C_MEMADD_SIZE_8BIT,dat,items,items*2);
+}
+
+bool HTS221_Init (I2C_HandleTypeDef * hi2c)
+{
+ HTS221_I2CHander = hi2c;
+ if (HTS221_CheckAvailable()){
+ HTS221_EnableDevice();
+ HTS221_GetCoefficient();
+ HTS221_ConfigDevice(HTS221_DEFAULTSETTING, HTS221_DEFAULTREG1, HTS221_DEFAULTREG2);
+ return (true);
+ }
+ else{
+ return (false);
+ }
+}
+
+static bool HTS221_CheckAvailable (void){
+ if (HTS221_I2C_Read_return(HTS221_WHO_AM_I)==HTS221_DEVICE_ID)
+ return (true);
+ else
+ return (false);
+}
+
+static void HTS221_GetCoefficient (void){
+ uint8_t data = 0;
+ HTS221_CoefStruc._H0_rH_x2 = HTS221_I2C_Read_return(HTS221_H0_RH_X2);
+ HTS221_CoefStruc._H1_rH_x2 = HTS221_I2C_Read_return(HTS221_H1_RH_X2);
+ data = HTS221_I2C_Read_return(HTS221_T1_T0_MSB);
+ HTS221_CoefStruc._T0_degC_x8 = ( data & 0x3 ) << 8;
+ HTS221_CoefStruc._T0_degC_x8 |= HTS221_I2C_Read_return(HTS221_T0_DEGC_X8);
+ HTS221_CoefStruc._T1_degC_x8 = ( data & 0xC ) << 6;
+ HTS221_CoefStruc._T1_degC_x8 |= HTS221_I2C_Read_return(HTS221_T1_DEGC_X8);
+ HTS221_CoefStruc._H0_T0_OUT = HTS221_I2C_Read_return(HTS221_H0_T0_OUT_H) << 8;
+ HTS221_CoefStruc._H0_T0_OUT |= HTS221_I2C_Read_return(HTS221_H0_T0_OUT_L);
+ HTS221_CoefStruc._H1_T0_OUT = HTS221_I2C_Read_return(HTS221_H1_T0_OUT_H) << 8;
+ HTS221_CoefStruc._H1_T0_OUT |= HTS221_I2C_Read_return(HTS221_H1_T0_OUT_L);
+ HTS221_CoefStruc._T0_OUT = HTS221_I2C_Read_return(HTS221_T0_OUT_H) << 8;
+ HTS221_CoefStruc._T0_OUT |= HTS221_I2C_Read_return(HTS221_T0_OUT_L);
+ HTS221_CoefStruc._T1_OUT = HTS221_I2C_Read_return(HTS221_T1_OUT_H) << 8;
+ HTS221_CoefStruc._T1_OUT |= HTS221_I2C_Read_return(HTS221_T1_OUT_L);
+}
+
+static void HTS221_EnableDevice (void){
+ uint8_t dat = 0;
+ dat |= HTS221_PD;
+ dat |= HTS221_ODR_1HZ;
+ HAL_I2C_Mem_Write(HTS221_I2CHander,HTS221_DevAddr,HTS221_CTRL_REG1,I2C_MEMADD_SIZE_8BIT,&dat,1,10);
+}
+
+void HTS221_ConfigDevice (uint8_t Config, uint8_t REGS1, uint8_t REGS2){
+// uint8_t data = Config;
+// data |= HTS221_AVGH_32;
+// data |= HTS221_AVGT_16;
+ HTS221_I2C_Write(HTS221_CTRL_REG1,®S1,sizeof(REGS1));
+ HTS221_I2C_Write(HTS221_CTRL_REG2,®S2,sizeof(REGS2));
+ HTS221_I2C_Write(HTS221_AV_CONF,&Config,sizeof(Config));
+}
+
+
+
+double HTS221_GetHumidity (void){
+ uint8_t data;
+ int16_t H_OUT = 0;
+ double t_H0_rH, t_H1_rH;
+ double humidity = 0.0;
+
+ data = readI2c(HTS221_STATUS_REG);
+ if ( data & HTS221_H_DA ) {
+ H_OUT = HTS221_I2C_Read_return(HTS221_HUMIDITY_OUT_H) << 8;
+ H_OUT |= HTS221_I2C_Read_return(HTS221_HUMIDITY_OUT_L);
+ t_H0_rH = HTS221_CoefStruc._H0_rH_x2 / 2.0;
+ t_H1_rH = HTS221_CoefStruc._H1_rH_x2 / 2.0;
+ humidity = t_H0_rH + ( t_H1_rH - t_H0_rH ) * ( H_OUT - HTS221_CoefStruc._H0_T0_OUT ) / ( HTS221_CoefStruc._H1_T0_OUT - HTS221_CoefStruc._H0_T0_OUT );
+ }
+ return humidity;
+}
+
+double HTS221_GetTemperature (void){
+ uint8_t data = 0;
+ uint16_t T_OUT = 0;
+ double t_T0_degC, t_T1_degC;
+ double temperature = 0.0;
+
+ data = readI2c(HTS221_STATUS_REG);
+ if ( data & HTS221_T_DA ) {
+ T_OUT = readI2c(HTS221_TEMP_OUT_H) << 8;
+ T_OUT |= readI2c(HTS221_TEMP_OUT_L);
+ t_T0_degC = HTS221_CoefStruc._T0_degC_x8 / 8.0;
+ t_T1_degC = HTS221_CoefStruc._T1_degC_x8 / 8.0;
+ temperature = t_T0_degC + ( t_T1_degC - t_T0_degC ) * ( T_OUT - HTS221_CoefStruc._T0_OUT ) / ( HTS221_CoefStruc._T1_OUT - HTS221_CoefStruc._T0_OUT );
+ }
+ return temperature;
+}
+
+
+
+
+
+
diff --git a/RTOS_IOT/Src/freertos.c b/RTOS_IOT/Src/freertos.c
new file mode 100644
index 0000000..866bcbe
--- /dev/null
+++ b/RTOS_IOT/Src/freertos.c
@@ -0,0 +1,70 @@
+/**
+ ******************************************************************************
+ * File Name : freertos.c
+ * Description : Code for freertos applications
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Variables -----------------------------------------------------------------*/
+
+/* USER CODE BEGIN Variables */
+
+/* USER CODE END Variables */
+
+/* Function prototypes -------------------------------------------------------*/
+
+/* USER CODE BEGIN FunctionPrototypes */
+
+/* USER CODE END FunctionPrototypes */
+
+/* Hook prototypes */
+
+/* USER CODE BEGIN Application */
+
+/* USER CODE END Application */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/RTOS_IOT/Src/main.c b/RTOS_IOT/Src/main.c
new file mode 100644
index 0000000..87ae118
--- /dev/null
+++ b/RTOS_IOT/Src/main.c
@@ -0,0 +1,778 @@
+/**
+ ******************************************************************************
+ * File Name : main.c
+ * Description : Main program body
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32l0xx_hal.h"
+#include "cmsis_os.h"
+#include "HTS221.h"
+#include "NVM_Manager.h"
+#include "debug_led.h"
+#include "console.h"
+
+/* USER CODE BEGIN Includes */
+#define USING_EEPROM
+//#define CodeTesting
+#define EEPROM_START_ADDRESS (uint32_t *)0x08080000
+#define NUMBER_OF_SAMPLING (uint8_t)0x5
+
+/* USER CODE END Includes */
+
+/* Private variables ---------------------------------------------------------*/
+I2C_HandleTypeDef hi2c1;
+
+RTC_HandleTypeDef hrtc;
+
+IRDA_HandleTypeDef hirda1;
+UART_HandleTypeDef huart2;
+
+
+extern osMutexId MutexEeprom;
+
+//osThreadId defaultTaskHandle;
+
+/* USER CODE BEGIN PV */
+/* Private variables ---------------------------------------------------------*/
+uint32_t thread1_counter;
+uint32_t Queue_number;
+uint8_t updateCounter = 0;
+
+osThreadId Task_NVM_ReadWrite;
+osThreadId Task_UartSend;
+osThreadId Task_SensorRead;
+osThreadId Task_ErrorCheck;
+
+
+osMessageQId Queue_SendTo_TaskNVM;
+osMessageQId Queue_SendTo_Uart;
+
+QueueSetHandle_t NVM_QueueSet;
+
+union uDate{
+ uint32_t u32_date;
+ struct {
+ uint8_t Weekday;
+ uint8_t Month;
+ uint8_t Date;
+ uint8_t Year;
+ }uStructDate;
+};
+
+union uTime{
+ uint32_t u32_Time;
+ struct {
+ uint8_t Hours;
+ uint8_t Minutes;
+ uint8_t Seconds;
+ uint8_t TimeFormat;
+ }uStructTime;
+};
+
+union uDataPacket{
+ uint32_t datPacket[4];
+ struct {
+ float temperature;
+ float humidity;
+ union uDate Date;
+ union uTime Time;
+ }uStructDataPacket;
+};
+
+struct StructDate{
+ uint8_t Weekday;
+ uint8_t Month;
+ uint8_t Date;
+ uint8_t Year;
+};
+
+struct StructTime{
+ uint8_t Hours;
+ uint8_t Minutes;
+ uint8_t Secounds;
+ uint8_t TimeFormat;
+};
+
+struct StrucDataPacket{
+ double temperature;
+ double humidity;
+ struct StructDate Acqdate;
+ struct StructTime Acqtime;
+};
+
+typedef enum{
+ EV_ReadsFromTempSensor,
+ EV_ReturnFromUartSend,
+ EV_ReturnFromBlinkLED,
+}EventId_NVM_Check;
+
+
+typedef struct{
+// struct StrucDataPacket dataset[5];
+ union uDataPacket udataset[5];
+}QMessageData_USART;
+
+typedef struct{
+ EventId_NVM_Check EventId;
+// struct StrucDataPacket TempnHumidity;
+ union uDataPacket uTempnHumidity;
+ uint8_t dataArray[4];
+ uint8_t* ptr_sent_Success;
+}QMessageData_ForNVM;
+
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+void Error_Handler(void);
+static void MX_GPIO_Init(void);
+static void MX_RTC_Init(void);
+static void MX_USART2_UART_Init(void);
+static void MX_USART1_IRDA_Init(void);
+static void MX_I2C1_Init(void);
+
+/* USER CODE BEGIN PFP */
+/* Private function prototypes -----------------------------------------------*/
+
+void func_NVM_Manager(void const* argument);
+void func_UartPrint (void const* argument);
+void func_SensorRead (void const* argument);
+void vApplicationTickHook(void);
+
+/* USER CODE END PFP */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+int main(void)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct;
+ /* USER CODE BEGIN 1 */
+
+ /* USER CODE END 1 */
+
+ /* MCU Configuration----------------------------------------------------------*/
+
+ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+ HAL_Init();
+
+ /* Configure the system clock */
+ SystemClock_Config();
+
+ /* Initialize all configured peripherals */
+ MX_GPIO_Init();
+ MX_RTC_Init();
+ MX_USART2_UART_Init();
+ MX_USART1_IRDA_Init();
+ MX_I2C1_Init();
+
+
+ /* USER CODE BEGIN 2 */
+
+ /* Configure Event AutoWakeup */
+// TODO: Need to configure the Period of auto wakeup currently is every 30 seconds
+ HAL_RTCEx_SetWakeUpTimer_IT(&hrtc, 30, RTC_WAKEUPCLOCK_CK_SPRE_16BITS);
+ NVIC_EnableIRQ(RTC_IRQn);
+ NVIC_SetPriority(RTC_IRQn,0);
+
+ /*Set Date & Time for RTC*/
+ // HAL_RTC_SetDate();
+ // HAL_RTC_SetTime();
+
+ /* USER CODE END 2 */
+
+ /* USER CODE BEGIN RTOS_MUTEX */
+ /* add mutexes, ... */
+ /* USER CODE END RTOS_MUTEX */
+
+ /* USER CODE BEGIN RTOS_SEMAPHORES */
+ /* add semaphores, ... */
+ /* USER CODE END RTOS_SEMAPHORES */
+
+ /* USER CODE BEGIN RTOS_TIMERS */
+ /* start timers, add new ones, ... */
+ /* USER CODE END RTOS_TIMERS */
+
+ /* Create the thread(s) */
+ /* definition and creation of defaultTask */
+// osThreadDef(defaultTask, StartDefaultTask, osPriorityNormal, 0, 128);
+// defaultTaskHandle = osThreadCreate(osThread(defaultTask), NULL);
+
+ /* USER CODE BEGIN RTOS_THREADS */
+ /* add threads, ... */
+
+ osThreadDef(HTS221_sensor, func_SensorRead, osPriorityNormal, 0, 96);
+ Task_SensorRead = osThreadCreate(osThread(HTS221_sensor),NULL);
+
+ osThreadDef(NVM, func_NVM_Manager, osPriorityAboveNormal, 0 ,96);
+ Task_NVM_ReadWrite = osThreadCreate(osThread(NVM),NULL);
+
+ osThreadDef(UartPrint, func_UartPrint, osPriorityAboveNormal, 0 , 128);
+ Task_UartSend = osThreadCreate(osThread(UartPrint),NULL);
+
+ /* USER CODE END RTOS_THREADS */
+
+ /* USER CODE BEGIN RTOS_QUEUES */
+ /* add queues, ... */
+
+// osMessageQDef(NVM_Manager,1,QMessageData_ForNVM);
+// osMessageQDef(NVM_Manager,1,uint8_t);
+// Queue_SendTo_TaskNVM = osMessageCreate(osMessageQ(NVM_Manager),Task_NVM_ReadWrite);
+
+// osMessageQDef(QSensor, 1, QMessageData_Sensor);
+// osMessageQDef(QSensor, 1, uint8_t);
+// Queue_SendTo_Uart = osMessageCreate(osMessageQ(QSensor), Task_UartSend);
+
+ Queue_SendTo_TaskNVM = xQueueCreate(1,sizeof(QMessageData_ForNVM));
+ Queue_SendTo_Uart = xQueueCreate(1,sizeof(QMessageData_USART));
+
+// xQueueCreateSet(1*sizeof(QMessageData_ForNVM)+1*sizeof(QMessageData_Sensor));
+// xQueueAddToSet(Queue_SendTo_TaskNVM,NVM_QueueSet);
+
+ /* USER CODE END RTOS_QUEUES */
+
+ EEPROM_Initialize();
+
+ GPIO_InitStruct.Pin = LD2_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+
+ HeartBeat_LED_Init(LD2_GPIO_Port, &GPIO_InitStruct);
+
+ Console_link(&huart2);
+
+
+
+ /* Start scheduler */
+ osKernelStart();
+
+ /* We should never get here as control is now taken by the scheduler */
+
+ /* Infinite loop */
+ /* USER CODE BEGIN WHILE */
+ while (1)
+ {
+ /* USER CODE END WHILE */
+
+ /* USER CODE BEGIN 3 */
+
+ }
+ /* USER CODE END 3 */
+
+}
+
+/** System Clock Configuration
+*/
+void SystemClock_Config(void)
+{
+
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+ RCC_PeriphCLKInitTypeDef PeriphClkInit;
+
+ /**Configure the main internal regulator output voltage
+ */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /**Initializes the CPU, AHB and APB busses clocks
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_MSI;
+ RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+ RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+ RCC_OscInitStruct.MSICalibrationValue = 0;
+ RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_5;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ /**Initializes the CPU, AHB and APB busses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+ |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_USART2
+ |RCC_PERIPHCLK_I2C1|RCC_PERIPHCLK_RTC;
+ PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
+ PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+ PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1;
+ PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ /**Configure the Systick interrupt time
+ */
+ HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
+
+ /**Configure the Systick
+ */
+ HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
+
+ /* SysTick_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(SysTick_IRQn, 2, 0);
+}
+
+/* I2C1 init function */
+static void MX_I2C1_Init(void)
+{
+
+ hi2c1.Instance = I2C1;
+ hi2c1.Init.Timing = 0x00000708;
+ hi2c1.Init.OwnAddress1 = 0;
+ hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
+ hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
+ hi2c1.Init.OwnAddress2 = 0;
+ hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
+ hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
+ hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
+ if (HAL_I2C_Init(&hi2c1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ /**Configure Analogue filter
+ */
+ if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ /**Configure Digital filter
+ */
+ if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+}
+
+/* RTC init function */
+static void MX_RTC_Init(void)
+{
+
+ RTC_TimeTypeDef sTime;
+ RTC_DateTypeDef sDate;
+
+ /**Initialize RTC Only
+ */
+ hrtc.Instance = RTC;
+ hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
+ hrtc.Init.AsynchPrediv = 127;
+ hrtc.Init.SynchPrediv = 255;
+ hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
+ hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE;
+ hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+ hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+ if (HAL_RTC_Init(&hrtc) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ /**Initialize RTC and set the Time and Date
+ */
+ if(HAL_RTCEx_BKUPRead(&hrtc, RTC_BKP_DR0) != 0x32F2){
+ sTime.Hours = 0x0;
+ sTime.Minutes = 0x0;
+ sTime.Seconds = 0x0;
+ sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
+ sTime.StoreOperation = RTC_STOREOPERATION_RESET;
+ if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ sDate.WeekDay = RTC_WEEKDAY_MONDAY;
+ sDate.Month = RTC_MONTH_JANUARY;
+ sDate.Date = 0x1;
+ sDate.Year = 0x0;
+
+ if (HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BCD) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ HAL_RTCEx_BKUPWrite(&hrtc,RTC_BKP_DR0,0x32F2);
+ }
+
+}
+
+/* USART1 init function */
+static void MX_USART1_IRDA_Init(void)
+{
+
+ hirda1.Instance = USART1;
+ hirda1.Init.BaudRate = 115200;
+ hirda1.Init.WordLength = IRDA_WORDLENGTH_7B;
+ hirda1.Init.Parity = IRDA_PARITY_NONE;
+ hirda1.Init.Mode = IRDA_MODE_TX_RX;
+ hirda1.Init.Prescaler = 10;
+ hirda1.Init.PowerMode = IRDA_POWERMODE_NORMAL;
+ if (HAL_IRDA_Init(&hirda1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+}
+
+/* USART2 init function */
+static void MX_USART2_UART_Init(void)
+{
+
+ huart2.Instance = USART2;
+ huart2.Init.BaudRate = 115200;
+ huart2.Init.WordLength = UART_WORDLENGTH_8B;
+ huart2.Init.StopBits = UART_STOPBITS_1;
+ huart2.Init.Parity = UART_PARITY_NONE;
+ huart2.Init.Mode = UART_MODE_TX_RX;
+ huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+ huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ if (HAL_UART_Init(&huart2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+}
+
+/** Configure pins as
+ * Analog
+ * Input
+ * Output
+ * EVENT_OUT
+ * EXTI
+*/
+static void MX_GPIO_Init(void)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct;
+
+ /* GPIO Ports Clock Enable */
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_GPIOH_CLK_ENABLE();
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(LD2_GPIO_Port, LD2_Pin, GPIO_PIN_RESET);
+
+ /*Configure GPIO pin : B1_Pin */
+ GPIO_InitStruct.Pin = B1_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : LD2_Pin */
+ GPIO_InitStruct.Pin = LD2_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 4 */
+void func_NVM_Manager(void const* argument){
+ QMessageData_ForNVM Rawdata;
+ QMessageData_USART Uartdata;
+ volatile uint32_t* Ptr_address=0;
+ uint8_t itr, itrx;
+ uint8_t Uart_Updatecounter = 0;
+
+ Ptr_address = EEPROM_START_ADDRESS;
+ HAL_FLASHEx_DATAEEPROM_Unlock();
+ for(itr=0; itr<50; itr++){
+ HAL_FLASHEx_DATAEEPROM_Erase((uint32_t)Ptr_address);
+ Ptr_address++;
+ }
+ HAL_FLASHEx_DATAEEPROM_Lock();
+
+ for(;;){
+// TODO: Copy data from Queue then write into the EEPROM.
+ xQueueReceive(Queue_SendTo_TaskNVM,&Rawdata,portMAX_DELAY);
+ switch (Rawdata.EventId) {
+ case EV_ReturnFromBlinkLED:
+ break;
+
+ case EV_ReadsFromTempSensor:
+// TODO: Receive the data from Temperature Sensor, then Save it into the NVM
+// write to EEPROM; start Counter
+ if (Uart_Updatecounter >= NUMBER_OF_SAMPLING){
+ #ifdef USING_EEPROM
+ Ptr_address = EEPROM_START_ADDRESS;
+ for (itr=0; itr < NUMBER_OF_SAMPLING; itr++){
+ for (itrx=0; itrx < 4; itrx++ ){
+ Uartdata.udataset[itr].datPacket[itrx] = *Ptr_address;
+ Ptr_address++;
+ }
+ }
+ xQueueSend(Queue_SendTo_Uart,&Uartdata,0);
+ Uart_Updatecounter = 0;
+ #else
+ xQueueSend(Queue_SendTo_Uart,&Uartdata,0);
+ Uart_Updatecounter = 0;
+ #endif
+ }
+
+ else {
+// Need to write into EEPROM then increment Uart_Updatecounter
+ #ifdef USING_EEPROM
+ if (Uart_Updatecounter == 0) Ptr_address = EEPROM_START_ADDRESS;
+ HAL_FLASHEx_DATAEEPROM_Unlock();
+ for (itr=0; itr < sizeof(Rawdata.uTempnHumidity)/sizeof(Rawdata.uTempnHumidity.datPacket[0]) ;itr++){
+ HAL_FLASHEx_DATAEEPROM_Program(FLASH_TYPEPROGRAMDATA_WORD, (uint32_t)Ptr_address, Rawdata.uTempnHumidity.datPacket[itr]);
+ Ptr_address+=(sizeof(Rawdata.uTempnHumidity.datPacket[itr])/sizeof(Ptr_address));
+ }
+ HAL_FLASHEx_DATAEEPROM_Lock();
+ Uart_Updatecounter++;
+ #else
+ Uartdata.dataset[Uart_Updatecounter]=Rawdata.TempnHumidity;
+ Uart_Updatecounter++;
+ #endif
+ }
+ break;
+
+ case EV_ReturnFromUartSend:
+// TODO: After confirm receive successful (0x01),
+// delete data in NVM.
+// else resend the data in NVM to UART.
+ if (Rawdata.dataArray[0]==0x01){
+ #ifdef USING_EEPROM
+ Ptr_address = EEPROM_START_ADDRESS;
+ for(itr=0; itr<10; itr++){
+ HAL_FLASHEx_DATAEEPROM_Erase((uint32_t)Ptr_address);
+ Ptr_address++;
+ }
+ #endif
+ #ifdef CodeTesting
+ Ptr_address = EEPROM_START_ADDRESS;
+ for(itr=0;itr<5;itr++){
+ Uartdata.dataset[itr].temperature= (double)(*Ptr_address);
+ Ptr_address++;
+ }
+ #endif
+ /*Config Low Power SleepMode*/
+// HAL_SuspendTick();
+// __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU);
+// HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON,PWR_SLEEPENTRY_WFI);
+// HAL_ResumeTick();
+ }
+ else {
+
+ }
+ break;
+
+ default:
+ break;
+ }
+ }
+}
+
+
+void func_UartPrint (void const* argument){
+ QMessageData_ForNVM sendReturn;
+ QMessageData_USART receiveData;
+ HAL_StatusTypeDef Status = 0;
+ uint8_t itr = 0;
+ char tempText[5] = "";
+ char OutputText[90]="";
+ for(;;)
+ {
+ xQueueReceive(Queue_SendTo_Uart,&receiveData,portMAX_DELAY);
+ for(itr=0; itr< NUMBER_OF_SAMPLING; itr++){
+
+
+ strcpy(OutputText,"Thread counter: ");
+ itoa(uxTaskPriorityGet(NULL),tempText,10);
+// itoa(thread1_counter,tempText,10);
+ strcat(OutputText,tempText);
+ strcat(OutputText,"\n");
+
+ strcat(OutputText,"Current Temperature is ");
+ itoa(receiveData.udataset[itr].uStructDataPacket.temperature,tempText,10);
+ strcat(OutputText,tempText);
+ strcat(OutputText, " Celsius\n");
+
+ strcat(OutputText, "Humidity is ");
+ itoa(receiveData.udataset[itr].uStructDataPacket.humidity,tempText,10);
+ strcat(OutputText,tempText);
+ strcat(OutputText, " %rh\n");
+
+ strcat(OutputText, " @ Time ");
+
+ itoa(receiveData.udataset[itr].uStructDataPacket.Time.uStructTime.Hours,tempText,10);
+ strcat(OutputText,tempText);
+ strcat(OutputText,":");
+ itoa(receiveData.udataset[itr].uStructDataPacket.Time.uStructTime.Minutes,tempText,10);
+ strcat(OutputText,tempText);
+ strcat(OutputText,":");
+ itoa(receiveData.udataset[itr].uStructDataPacket.Time.uStructTime.Seconds,tempText,10);
+ strcat(OutputText,tempText);
+ strcat(OutputText, "\n \n");
+
+ Status += HAL_UART_Transmit(&huart2,(uint8_t *)OutputText,sizeof(OutputText),200);
+ }
+ // HAL_UART_Transmit(&huart2,(uint8_t *)"testing",10,200);
+ sendReturn.EventId = EV_ReturnFromUartSend;
+ if (Status == HAL_OK) sendReturn.dataArray[0]=0x01;
+ else sendReturn.dataArray[0]=0x00;
+ Status = 0;
+ xQueueSend(Queue_SendTo_TaskNVM,&sendReturn,0);
+ }
+}
+
+
+void func_SensorRead (void const* argument){
+ uint32_t xLastTickWakeup = osKernelSysTick();
+ updateCounter = 0;
+ QMessageData_ForNVM data;
+ HTS221_Init(&hi2c1);
+ RTC_TimeTypeDef Time;
+ for(;;)
+ {
+// TODO: Need to verify the integrity of readout values from sensor
+ data.EventId = EV_ReadsFromTempSensor;
+// osThreadSetPriority(Task_SensorRead,osPriorityAboveNormal);
+ data.uTempnHumidity.uStructDataPacket.temperature = (float)HTS221_GetTemperature();
+ data.uTempnHumidity.uStructDataPacket.humidity = (float)HTS221_GetHumidity();
+// osThreadSetPriority(Task_SensorRead,osPriorityNormal);
+ HAL_RTC_GetDate(&hrtc,(RTC_DateTypeDef *)(&data.uTempnHumidity.uStructDataPacket.Date.uStructDate.Weekday),RTC_FORMAT_BIN);
+ HAL_RTC_GetTime(&hrtc,&Time,RTC_FORMAT_BIN );
+ data.uTempnHumidity.uStructDataPacket.Time.uStructTime.Hours = Time.Hours;
+ data.uTempnHumidity.uStructDataPacket.Time.uStructTime.Minutes = Time.Minutes;
+ data.uTempnHumidity.uStructDataPacket.Time.uStructTime.Seconds= Time.Seconds;
+ data.uTempnHumidity.uStructDataPacket.Time.uStructTime.TimeFormat= Time.TimeFormat;
+
+ xQueueSend(Queue_SendTo_TaskNVM,&data,0);
+ //TODO: Need to comment the osDelay(1000) after implementation of autowakeup function event
+// osDelay(1000);
+ osDelayUntil(&xLastTickWakeup,1000);
+ }
+}
+
+void vApplicationTickHook (void){
+ for(;;){
+
+ }
+}
+
+
+/* USER CODE END 4 */
+
+/* StartDefaultTask function */
+//void StartDefaultTask(void const * argument)
+//{
+//
+// /* USER CODE BEGIN 5 */
+//// Infinite loop
+// for(;;)
+// {
+// thread1_counter++;
+// HAL_GPIO_TogglePin(LD2_GPIO_Port, LD2_Pin);
+//// HAL_UART_Transmit(&huart2,(uint8_t *)"Next Game",10,200);
+// osDelay(1000);
+//// xQueueReceive(queue2,&receivebuffer,portMAX_DELAY);
+//// osMessageGet(queue1,2000);
+// }
+// /* USER CODE END 5 */
+//}
+
+/**
+ * @brief This function is executed in case of error occurrence.
+ * @param None
+ * @retval None
+ */
+void Error_Handler(void)
+{
+ /* USER CODE BEGIN Error_Handler */
+ /* User can add his own implementation to report the HAL error return state */
+ while(1)
+ {
+ LED_HeartBeat(NULL);
+ }
+ /* USER CODE END Error_Handler */
+}
+
+#ifdef USE_FULL_ASSERT
+
+/**
+ * @brief Reports the name of the source file and the source line number
+ * where the assert_param error has occurred.
+ * @param file: pointer to the source file name
+ * @param line: assert_param error line source number
+ * @retval None
+ */
+void assert_failed(uint8_t* file, uint32_t line)
+{
+ /* USER CODE BEGIN 6 */
+ /* User can add his own implementation to report the file name and line number,
+ ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+ /* USER CODE END 6 */
+
+}
+
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/RTOS_IOT/Src/stm32l0xx_hal_msp.c b/RTOS_IOT/Src/stm32l0xx_hal_msp.c
new file mode 100644
index 0000000..11a157f
--- /dev/null
+++ b/RTOS_IOT/Src/stm32l0xx_hal_msp.c
@@ -0,0 +1,284 @@
+/**
+ ******************************************************************************
+ * File Name : stm32l0xx_hal_msp.c
+ * Description : This file provides code for the MSP Initialization
+ * and de-Initialization codes.
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ * contributors to this software may be used to endorse or promote products
+ * derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ * software, must execute solely and exclusively on microcontroller or
+ * microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ * this license is void and will automatically terminate your rights under
+ * this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal.h"
+
+extern void Error_Handler(void);
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+ * Initializes the Global MSP.
+ */
+void HAL_MspInit(void)
+{
+ /* USER CODE BEGIN MspInit 0 */
+
+ /* USER CODE END MspInit 0 */
+
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* System interrupt init*/
+ /* SVC_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(SVC_IRQn, 0, 0);
+ /* PendSV_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(PendSV_IRQn, 3, 0);
+ /* SysTick_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(SysTick_IRQn, 3, 0);
+
+ /* USER CODE BEGIN MspInit 1 */
+
+ /* USER CODE END MspInit 1 */
+}
+
+void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct;
+ if(hi2c->Instance==I2C1)
+ {
+ /* USER CODE BEGIN I2C1_MspInit 0 */
+
+ /* USER CODE END I2C1_MspInit 0 */
+
+ /**I2C1 GPIO Configuration
+ PB8 ------> I2C1_SCL
+ PB9 ------> I2C1_SDA
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /* Peripheral clock enable */
+ __HAL_RCC_I2C1_CLK_ENABLE();
+ /* USER CODE BEGIN I2C1_MspInit 1 */
+
+ /* USER CODE END I2C1_MspInit 1 */
+ }
+
+}
+
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
+{
+
+ if(hi2c->Instance==I2C1)
+ {
+ /* USER CODE BEGIN I2C1_MspDeInit 0 */
+
+ /* USER CODE END I2C1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_I2C1_CLK_DISABLE();
+
+ /**I2C1 GPIO Configuration
+ PB8 ------> I2C1_SCL
+ PB9 ------> I2C1_SDA
+ */
+ HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
+
+ }
+ /* USER CODE BEGIN I2C1_MspDeInit 1 */
+
+ /* USER CODE END I2C1_MspDeInit 1 */
+
+}
+
+void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+
+ if(hrtc->Instance==RTC)
+ {
+ /* USER CODE BEGIN RTC_MspInit 0 */
+
+ /* USER CODE END RTC_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_RTC_ENABLE();
+ /* USER CODE BEGIN RTC_MspInit 1 */
+
+ /* USER CODE END RTC_MspInit 1 */
+ }
+
+}
+
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+
+ if(hrtc->Instance==RTC)
+ {
+ /* USER CODE BEGIN RTC_MspDeInit 0 */
+
+ /* USER CODE END RTC_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_RTC_DISABLE();
+ }
+ /* USER CODE BEGIN RTC_MspDeInit 1 */
+
+ /* USER CODE END RTC_MspDeInit 1 */
+
+}
+
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef* hirda)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct;
+ if(hirda->Instance==USART1)
+ {
+ /* USER CODE BEGIN USART1_MspInit 0 */
+
+ /* USER CODE END USART1_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_USART1_CLK_ENABLE();
+
+ /**USART1 GPIO Configuration
+ PA9 ------> USART1_TX
+ PA10 ------> USART1_RX
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF4_USART1;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN USART1_MspInit 1 */
+
+ /* USER CODE END USART1_MspInit 1 */
+ }
+
+}
+
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct;
+ if(huart->Instance==USART2)
+ {
+ /* USER CODE BEGIN USART2_MspInit 0 */
+
+ /* USER CODE END USART2_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_USART2_CLK_ENABLE();
+
+ /**USART2 GPIO Configuration
+ PA2 ------> USART2_TX
+ PA3 ------> USART2_RX
+ */
+ GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLUP;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ GPIO_InitStruct.Alternate = GPIO_AF4_USART2;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN USART2_MspInit 1 */
+
+ /* USER CODE END USART2_MspInit 1 */
+ }
+
+}
+
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef* hirda)
+{
+
+ if(hirda->Instance==USART1)
+ {
+ /* USER CODE BEGIN USART1_MspDeInit 0 */
+
+ /* USER CODE END USART1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USART1_CLK_DISABLE();
+
+ /**USART1 GPIO Configuration
+ PA9 ------> USART1_TX
+ PA10 ------> USART1_RX
+ */
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
+
+ }
+ /* USER CODE BEGIN USART1_MspDeInit 1 */
+
+ /* USER CODE END USART1_MspDeInit 1 */
+
+}
+
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+
+ if(huart->Instance==USART2)
+ {
+ /* USER CODE BEGIN USART2_MspDeInit 0 */
+
+ /* USER CODE END USART2_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USART2_CLK_DISABLE();
+
+ /**USART2 GPIO Configuration
+ PA2 ------> USART2_TX
+ PA3 ------> USART2_RX
+ */
+ HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin);
+
+ }
+ /* USER CODE BEGIN USART2_MspDeInit 1 */
+
+ /* USER CODE END USART2_MspDeInit 1 */
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/RTOS_IOT/Src/stm32l0xx_it.c b/RTOS_IOT/Src/stm32l0xx_it.c
new file mode 100644
index 0000000..43c66c5
--- /dev/null
+++ b/RTOS_IOT/Src/stm32l0xx_it.c
@@ -0,0 +1,89 @@
+/**
+ ******************************************************************************
+ * @file stm32l0xx_it.c
+ * @brief Interrupt Service Routines.
+ ******************************************************************************
+ *
+ * COPYRIGHT(c) 2017 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal.h"
+#include "stm32l0xx.h"
+#include "stm32l0xx_it.h"
+#include "cmsis_os.h"
+#include "console.h"
+
+
+/* USER CODE BEGIN 0 */
+extern RTC_HandleTypeDef hrtc;
+extern UART_HandleTypeDef huart2;
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+
+/******************************************************************************/
+/* Cortex-M0+ Processor Interruption and Exception Handlers */
+/******************************************************************************/
+
+/**
+* @brief This function handles System tick timer.
+*/
+void SysTick_Handler(void)
+{
+ /* USER CODE BEGIN SysTick_IRQn 0 */
+
+ /* USER CODE END SysTick_IRQn 0 */
+ HAL_IncTick();
+ osSystickHandler();
+ /* USER CODE BEGIN SysTick_IRQn 1 */
+
+ /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32L0xx Peripheral Interrupt Handlers */
+/* Add here the Interrupt Handlers for the used peripherals. */
+/* For the available peripheral interrupt handler names, */
+/* please refer to the startup file (startup_stm32l0xx.s). */
+/******************************************************************************/
+
+/* USER CODE BEGIN 1 */
+void RTC_IRQHandler (void){
+ HAL_RTCEx_WakeUpTimerIRQHandler(&hrtc);
+}
+
+
+
+void USART2_IRQHandler (void)
+{
+ HAL_UART_IRQHandler(&huart2);
+ Console_NVIC(&huart2);
+}
+
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/RTOS_IOT/Src/system_stm32l0xx.c b/RTOS_IOT/Src/system_stm32l0xx.c
new file mode 100644
index 0000000..36ffb73
--- /dev/null
+++ b/RTOS_IOT/Src/system_stm32l0xx.c
@@ -0,0 +1,287 @@
+/**
+ ******************************************************************************
+ * @file system_stm32l0xx.c
+ * @author MCD Application Team
+ * @version V1.7.1
+ * @date 25-November-2016
+ * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32l0xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © COPYRIGHT(c) 2016 STMicroelectronics
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32l0xx_system
+ * @{
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32l0xx.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE ((uint32_t)2000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Defines
+ * @{
+ */
+/************************* Miscellaneous Configuration ************************/
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00U /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 2000000U;
+ const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
+ const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
+ const uint8_t PLLMulTable[9] = {3U, 4U, 6U, 8U, 12U, 16U, 24U, 32U, 48U};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32L0xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * @param None
+ * @retval None
+ */
+void SystemInit (void)
+{
+/*!< Set MSION bit */
+ RCC->CR |= (uint32_t)0x00000100U;
+
+ /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
+ RCC->CFGR &= (uint32_t) 0x88FF400CU;
+
+ /*!< Reset HSION, HSIDIVEN, HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFF6U;
+
+ /*!< Reset HSI48ON bit */
+ RCC->CRRCR &= (uint32_t)0xFFFFFFFEU;
+
+ /*!< Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFFU;
+
+ /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
+ RCC->CFGR &= (uint32_t)0xFF02FFFFU;
+
+ /*!< Disable all interrupts */
+ RCC->CIER = 0x00000000U;
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock according to Clock Register Values
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI
+ * value as defined by the MSI range.
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32l0xx_hal.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32l0xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0U, pllmul = 0U, plldiv = 0U, pllsource = 0U, msirange = 0U;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00U: /* MSI used as system clock */
+ msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13U;
+ SystemCoreClock = (32768U * (1U << (msirange + 1U)));
+ break;
+ case 0x04U: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x08U: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x0CU: /* PLL used as system clock */
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
+ plldiv = RCC->CFGR & RCC_CFGR_PLLDIV;
+ pllmul = PLLMulTable[(pllmul >> 18U)];
+ plldiv = (plldiv >> 22U) + 1U;
+
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+
+ if (pllsource == 0x00U)
+ {
+ /* HSI oscillator clock selected as PLL clock entry */
+ SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv);
+ }
+ else
+ {
+ /* HSE selected as PLL clock entry */
+ SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv);
+ }
+ break;
+ default: /* MSI used as system clock */
+ msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13U;
+ SystemCoreClock = (32768U * (1U << (msirange + 1U)));
+ break;
+ }
+ /* Compute HCLK clock frequency --------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/RTOS_IOT/startup/startup_stm32l053xx.s b/RTOS_IOT/startup/startup_stm32l053xx.s
new file mode 100644
index 0000000..ba54e3e
--- /dev/null
+++ b/RTOS_IOT/startup/startup_stm32l053xx.s
@@ -0,0 +1,295 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32l053xx.s
+ * @author MCD Application Team
+ * @version V1.7.1
+ * @date 25-November-2016
+ * @brief STM32L053xx Devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M0+ processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m0plus
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr r0, =_estack
+ mov sp, r0 /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2]
+ adds r2, r2, #4
+
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+
+LoopForever:
+ b LoopForever
+
+
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word 0
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detection */
+ .word RTC_IRQHandler /* RTC through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_CRS_IRQHandler /* RCC and CRS */
+ .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
+ .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
+ .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
+ .word TSC_IRQHandler /* TSC */
+ .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
+ .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
+ .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+ .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
+ .word LPTIM1_IRQHandler /* LPTIM1 */
+ .word 0 /* Reserved */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word 0 /* Reserved */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
+ .word 0 /* Reserved */
+ .word 0 /* Reserved */
+ .word TIM21_IRQHandler /* TIM21 */
+ .word 0 /* Reserved */
+ .word TIM22_IRQHandler /* TIM22 */
+ .word I2C1_IRQHandler /* I2C1 */
+ .word I2C2_IRQHandler /* I2C2 */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word RNG_LPUART1_IRQHandler /* RNG and LPUART1 */
+ .word LCD_IRQHandler /* LCD */
+ .word USB_IRQHandler /* USB */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_CRS_IRQHandler
+ .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+ .weak EXTI0_1_IRQHandler
+ .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+ .weak EXTI2_3_IRQHandler
+ .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+ .weak EXTI4_15_IRQHandler
+ .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+ .weak TSC_IRQHandler
+ .thumb_set TSC_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_3_IRQHandler
+ .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_5_6_7_IRQHandler
+ .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+ .weak ADC1_COMP_IRQHandler
+ .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+ .weak LPTIM1_IRQHandler
+ .thumb_set LPTIM1_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM21_IRQHandler
+ .thumb_set TIM21_IRQHandler,Default_Handler
+
+ .weak TIM22_IRQHandler
+ .thumb_set TIM22_IRQHandler,Default_Handler
+
+ .weak I2C1_IRQHandler
+ .thumb_set I2C1_IRQHandler,Default_Handler
+
+ .weak I2C2_IRQHandler
+ .thumb_set I2C2_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak RNG_LPUART1_IRQHandler
+ .thumb_set RNG_LPUART1_IRQHandler,Default_Handler
+
+ .weak LCD_IRQHandler
+ .thumb_set LCD_IRQHandler,Default_Handler
+
+ .weak USB_IRQHandler
+ .thumb_set USB_IRQHandler,Default_Handler
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+