init.c

/*
 * MemTest86+ V5 Specific code (GPL V2.0)
 * By Samuel DEMEULEMEESTER, sdemeule@memtest.org
 * http://www.canardpc.com - http://www.memtest.org
 * ------------------------------------------------
 * init.c - MemTest-86  Version 3.6
 *
 * Released under version 2 of the Gnu Public License.
 * By Chris Brady
 */
 

#include "stdin.h"
#include "stddef.h"
#include "test.h"
#include "defs.h"
#include "config.h"
#include "cpuid.h"
#include "smp.h"
#include "io.h"
#include "spd.h"
#include "pci.h"
#include "controller.h"

extern struct tseq tseq[];
extern short memsz_mode;
extern int num_cpus;
extern int act_cpus;
extern int found_cpus;
unsigned long imc_type = 0;
extern int maxcpus;
extern char cpu_mask[];
extern void initialise_cpus();

/* Here we store all of the cpuid data */
extern struct cpu_ident cpu_id;

int l1_cache=0, l2_cache=0, l3_cache=0;
int tsc_invariable = 0;
ulong extclock;

ulong memspeed(ulong src, ulong len, int iter);
static void cpu_type(void);
static int cpuspeed(void);
static void get_cache_size();
static void cpu_cache_speed();
void get_cpuid();
int beepmode;
int conservative_smp = CONSERVATIVE_SMP;
extern short dmi_initialized;
extern int dmi_err_cnts[MAX_DMI_MEMDEVS];

/* Failsafe function */
/* msec: number of ms to wait - scs: scancode expected to stop */
/* bits: 0 = extended detection - 1: SMP - 2: Temp Check */
/* 3: MP SMP - 4-7: RSVD */
void failsafe(int msec, int scs)
{
	int i;
	ulong sh, sl, l, h, t;
	unsigned char c;
	volatile char *pp;
	
	for(i=0, pp=(char *)(SCREEN_ADR+(18*160)+(18*2)+1); i<40; i++, pp+=2) {
		*pp = 0x1E;
	}	
	for(i=0, pp=(char *)(SCREEN_ADR+(18*160)+(18*2)+1); i<3; i++, pp+=2) {
		*pp = 0x9E;
	}	
	for(i=0, pp=(char *)(SCREEN_ADR+(18*160)+(55*2)+1); i<3; i++, pp+=2) {
		*pp = 0x9E;
	}	
	
	cprint(18, 18, "==> Press F1 to enter Fail-Safe Mode <==");
	
	if(v->fail_safe & 2)
	{
	cprint(19, 15, "==> Press F2 to force Multi-Threading (SMP) <==");				
	}

	/* save the starting time */
	asm __volatile__(
		"rdtsc":"=a" (sl),"=d" (sh));

	/* loop for n seconds */
	while (1) {
		asm __volatile__(
			"rdtsc":"=a" (l),"=d" (h));
		asm __volatile__ (
			"subl %2,%0\n\t"
			"sbbl %3,%1"
			:"=a" (l), "=d" (h)
			:"g" (sl), "g" (sh),
			"0" (l), "1" (h));

		t = h * ((unsigned)0xffffffff / v->clks_msec);
		t += (l / v->clks_msec);

		/* Is the time up? */
		if (t >= msec) { break;	}
		
		/* Is expected Scan code pressed? */
		c = get_key();
		c &= 0x7f;
		
		/* F1 */
		if(c == scs) { v->fail_safe |= 1;	break; }
					
		/* F2 */
		if(c == scs+1) 
		{ 
			v->fail_safe ^= 2;
			break;

		}
		
		/* F3 */
		if(c == scs+2) 
		{ 
			if(v->fail_safe & 2) { v->fail_safe ^= 2; }
			v->fail_safe |= 8;
			break;
		}				
			
	}
	
	cprint(18, 18, "                                          ");
	cprint(19, 15, "                                                ");
	
	for(i=0, pp=(char *)(SCREEN_ADR+(18*160)+(18*2)+1); i<40; i++, pp+=2) {
		*pp = 0x17;
	}		
	
}



static void display_init(void)
{
	int i;
	volatile char *pp;
	
	/* Set HW cursor out of screen boundaries */
	__outb(0x0F, 0x03D4);
	__outb(0xFF, 0x03D5);

	__outb(0x0E, 0x03D4);
	__outb(0xFF, 0x03D5);


	serial_echo_init();
  serial_echo_print("INE_SCROLL;24r"); /* Set scroll area row 7-23 */
  serial_echo_print("");   /* Clear Screen */
  serial_echo_print("");
  serial_echo_print("");
  serial_echo_print("");

	/* Clear screen & set background to blue */
	for(i=0, pp=(char *)(SCREEN_ADR); i<80*24; i++) {
		*pp++ = ' ';
		*pp++ = 0x17;
	}

	/* Make the name background green */
	for(i=0, pp=(char *)(SCREEN_ADR+1); i<TITLE_WIDTH; i++, pp+=2) {
		*pp = 0x20;
	}
	cprint(0, 0, "      Memtest86  5.01        ");

	/* Set Blinking "+" */
	for(i=0, pp=(char *)(SCREEN_ADR+1); i<2; i++, pp+=30) {
		*pp = 0xA4;
	}
	cprint(0, 15, "+");

	/* Do reverse video for the bottom display line */
	for(i=0, pp=(char *)(SCREEN_ADR+1+(24 * 160)); i<80; i++, pp+=2) {
		*pp = 0x71;
	}

   serial_echo_print("");
}

/*
 * Initialize test, setup screen and find out how much memory there is.
 */
void init(void)
{
	int i;
	
	outb(0x8, 0x3f2);  /* Kill Floppy Motor */

	/* Turn on cache */
	set_cache(1);

	/* Setup the display */
	display_init();
	
	cprint(5, 60, "| Time:   0:00:00");
	cprint(1, COL_MID,"Pass   %");
	cprint(2, COL_MID,"Test   %");
	cprint(3, COL_MID,"Test #");
	cprint(4, COL_MID,"Testing: ");
	cprint(5, COL_MID,"Pattern: ");
	cprint(1, 0, "CLK:           (32b Mode)");
	cprint(2, 0, "L1 Cache: Unknown ");
	cprint(3, 0, "L2 Cache: Unknown ");
  cprint(4, 0, "L3 Cache:  None    ");
  cprint(5, 0, "Memory  :         ");
  cprint(6, 0, "------------------------------------------------------------------------------");
	cprint(7, 0, "Core#:");
	cprint(8, 0, "State:");
	cprint(9, 0, "Cores:    Active /    Total (Run: All) | Pass:       0        Errors:      0  ");
	cprint(10, 0, "------------------------------------------------------------------------------");

	/*	
	for(i=0, pp=(char *)(SCREEN_ADR+(5*160)+(53*2)+1); i<20; i++, pp+=2) {
		*pp = 0x92;
	}

	for(i=0, pp=(char *)(SCREEN_ADR+0*160+1); i<80; i++, pp+=2) {
		*pp = 0x47;
	}
	*/
	
	cprint(7, 39, "| Chipset : Unknown");
	cprint(8, 39, "| Memory Type : Unknown");
	

	for(i=0; i < 6; i++) {
		cprint(i, COL_MID-2, "| ");
	}
	
	footer();

  aprint(5, 10, v->test_pages);

  v->pass = 0;
  v->msg_line = 0;
  v->ecount = 0;
  v->ecc_ecount = 0;
	v->testsel = -1;
	v->msg_line = LINE_SCROLL-1;
	v->scroll_start = v->msg_line * 160;
	v->erri.low_addr.page = 0x7fffffff;
	v->erri.low_addr.offset = 0xfff;
	v->erri.high_addr.page = 0;
	v->erri.high_addr.offset = 0;
	v->erri.min_bits = 32;
	v->erri.max_bits = 0;
	v->erri.min_bits = 32;
	v->erri.max_bits = 0;
	v->erri.maxl = 0;
	v->erri.cor_err = 0;
	v->erri.ebits = 0;
	v->erri.hdr_flag = 0;
	v->erri.tbits = 0;
	for (i=0; tseq[i].msg != NULL; i++) {
		tseq[i].errors = 0;
	}
	if (dmi_initialized) {
		for (i=0; i < MAX_DMI_MEMDEVS; i++){
			if (dmi_err_cnts[i] > 0) {
				dmi_err_cnts[i] = 0;
			}
		}
	}
	
	/* setup beep mode */
	beepmode = BEEP_MODE;
	
	/* Get the cpu and cache information */
	get_cpuid();

	/* setup pci */
	pci_init(); 

	get_cache_size(); 

	cpu_type();

	cpu_cache_speed();

  /* Check fail safe */	
	failsafe(5000, 0x3B);

	/* Initalize SMP */
	initialise_cpus();
	
	for (i = 0; i <num_cpus; i++) {
		dprint(7, i+7, i%10, 1, 0);
		cprint(8, i+7, "S");
	}

	dprint(9, 19, num_cpus, 2, 0);
	
	if((v->fail_safe & 3) == 2)
	{
			cprint(LINE_CPU,9, "(SMP: Disabled)");
			cprint(LINE_RAM,9, "Running...");
	}
	// dprint(10, 5, found_cpus, 2, 0); 

	/* Find Memory Specs */
	if(v->fail_safe & 1) 
		{ 	
			cprint(LINE_CPU, COL_SPEC, " **** FAIL SAFE **** FAIL SAFE **** ");
			cprint(LINE_RAM, COL_SPEC, "   No detection, same reliability   ");
		} else {
			find_controller();
			get_spd_spec();
			if(num_cpus <= 16 && !(v->fail_safe & 4)) { coretemp(); }
		}
	
	if(v->check_temp > 0 && !(v->fail_safe & 4))
	{
		cprint(LINE_CPU, 26, "|  CPU Temp");
		cprint(LINE_CPU+1, 26, "|      øC");
	}
	
		beep(600);
		beep(1000);
	
	/* Record the start time */
  asm __volatile__ ("rdtsc":"=a" (v->startl),"=d" (v->starth));
  v->snapl = v->startl;
  v->snaph = v->starth;
	if (l1_cache == 0) { l1_cache = 64; }
	if (l2_cache == 0) { l1_cache = 512; }
	v->printmode=PRINTMODE_ADDRESSES;
	v->numpatn=0;
}

/* Get cache sizes for most AMD and Intel CPUs, exceptions for old CPUs are
 * handled in CPU detection */
void get_cache_size()
{
	int i, j, n, size;
	unsigned int v[4];
	unsigned char *dp = (unsigned char *)v;
	struct cpuid4_eax *eax = (struct cpuid4_eax *)&v[0];
	struct cpuid4_ebx *ebx = (struct cpuid4_ebx *)&v[1];
	struct cpuid4_ecx *ecx = (struct cpuid4_ecx *)&v[2];

	switch(cpu_id.vend_id.char_array[0]) {
	/* AMD Processors */
	case 'A':
		//l1_cache = cpu_id.cache_info.amd.l1_i_sz;
		l1_cache = cpu_id.cache_info.amd.l1_d_sz;
		l2_cache = cpu_id.cache_info.amd.l2_sz;
		l3_cache = cpu_id.cache_info.amd.l3_sz;
    l3_cache *= 512;
		break;
	case 'G':
		/* Intel Processors */
		l1_cache = 0;
		l2_cache = 0;
		l3_cache = 0;

		/* Use CPUID(4) if it is available */
		if (cpu_id.max_cpuid > 3) {

		   /* figure out how many cache leaves */
		    n = -1;
		    do 
		    {
					++n;
					/* Do cpuid(4) loop to find out num_cache_leaves */
					cpuid_count(4, n, &v[0], &v[1], &v[2], &v[3]);
		    } while ((eax->ctype) != 0);

		    /* loop through all of the leaves */
		    for (i=0; i<n; i++) 
		    {
					cpuid_count(4, i, &v[0], &v[1], &v[2], &v[3]);

					/* Check for a valid cache type */
					if (eax->ctype == 1 || eax->ctype == 3) 
					{

			    	/* Compute the cache size */
			    	size = (ecx->number_of_sets + 1) *
            	              	  (ebx->coherency_line_size + 1) *
              	            	  (ebx->physical_line_partition + 1) *
                	          	  (ebx->ways_of_associativity + 1);
			    	size /= 1024;

				    switch (eax->level) 
				    {
					  	case 1:
								l1_cache += size;
								break;
					    case 2:
								l2_cache += size;
								break;
					    case 3:
								l3_cache += size;
								break;
					  }
					}
		    }
		    return;
		}

		/* No CPUID(4) so we use the older CPUID(2) method */
		/* Get number of times to iterate */
		cpuid(2, &v[0], &v[1], &v[2], &v[3]);
		n = v[0] & 0xff;
                for (i=0 ; i<n ; i++) {
                    cpuid(2, &v[0], &v[1], &v[2], &v[3]);

                    /* If bit 31 is set, this is an unknown format */
                    for (j=0 ; j<3 ; j++) {
                            if (v[j] & (1 << 31)) {
                                    v[j] = 0;
			    }
		    }

                    /* Byte 0 is level count, not a descriptor */
                    for (j = 1 ; j < 16 ; j++) {
			switch(dp[j]) {
			case 0x6:
			case 0xa:
			case 0x66:
				l1_cache += 8;
				break;
			case 0x8:
			case 0xc:
			case 0xd:
			case 0x60:
			case 0x67:
				l1_cache += 16;
				break;
			case 0xe:
				l1_cache += 24;
				break;
			case 0x9:
			case 0x2c:
			case 0x30:
			case 0x68:
				l1_cache += 32;
				break;
			case 0x39:
			case 0x3b:
			case 0x41:
			case 0x79:
				l2_cache += 128;
				break;
			case 0x3a:
				l2_cache += 192;
				break;
			case 0x21:
			case 0x3c:
			case 0x3f:
			case 0x42:
			case 0x7a:
			case 0x82:
				l2_cache += 256;
				break;
			case 0x3d:
				l2_cache += 384;
				break;
			case 0x3e:
			case 0x43:
			case 0x7b:
			case 0x7f:
			case 0x80:
			case 0x83:
			case 0x86:
				l2_cache += 512;
				break;
			case 0x44:
			case 0x78:
			case 0x7c:
			case 0x84:
			case 0x87:
				l2_cache += 1024;
				break;
			case 0x45:
			case 0x7d:
			case 0x85:
				l2_cache += 2048;
				break;
			case 0x48:
				l2_cache += 3072;
				break;
			case 0x4e:
				l2_cache += 6144;
				break;
			case 0x23:
			case 0xd0:
				l3_cache += 512;
				break;
			case 0xd1:
			case 0xd6:
				l3_cache += 1024;
				break;
			case 0x25:
			case 0xd2:
			case 0xd7:
			case 0xdc:
			case 0xe2:
				l3_cache += 2048;
				break;
			case 0x29:
			case 0x46:
			case 0x49:
			case 0xd8:
			case 0xdd:
			case 0xe3:
				l3_cache += 4096;
				break;
			case 0x4a:
				l3_cache += 6144;
				break;
			case 0x47:
			case 0x4b:
			case 0xde:
			case 0xe4:
				l3_cache += 8192;
				break;	
			case 0x4c:
			case 0xea:
				l3_cache += 12288;
				break;	
			case 0x4d:
				l3_cache += 16384;
				break;	
			case 0xeb:
				l3_cache += 18432;
				break;	
			case 0xec:
				l3_cache += 24576;
				break;	
			} /* end switch */
		    } /* end for 1-16 */
		} /* end for 0 - n */
	}
}

/*
 * Find IMC type and set global variables accordingly
 */
void detect_imc(void)
{
	// Check AMD IMC
	if(cpu_id.vend_id.char_array[0] == 'A' && cpu_id.vers.bits.family == 0xF) 
		{
			switch(cpu_id.vers.bits.extendedFamily)
					{
						case 0x0:
							imc_type = 0x0100; // Old K8
							break;
						case 0x1:
						case 0x2:
							imc_type = 0x0101; // K10 (Family 10h & 11h)
							break;
						case 0x3:
							imc_type = 0x0102; // A-Series APU (Family 12h)
							break;
						case 0x5:
							imc_type = 0x0103; // C- / E- / Z- Series APU (Family 14h)
							break;	
						case 0x6:
							imc_type = 0x0104; // FX Series (Family 15h)
							break;								
						case 0x7:
							imc_type = 0x0105; // Kabini & related (Family 16h)
							break;			
					}	
			return;
		}
					
	// Check Intel IMC	
	if(cpu_id.vend_id.char_array[0] == 'G' && cpu_id.vers.bits.family == 6 && cpu_id.vers.bits.extendedModel) 
		{					
			switch(cpu_id.vers.bits.model)
			{
				case 0x5:
					if(cpu_id.vers.bits.extendedModel == 2) { imc_type = 0x0003; } // Core i3/i5 1st Gen 45 nm (NHM)
					if(cpu_id.vers.bits.extendedModel == 3) { v->fail_safe |= 4; } // Atom Clover Trail
					if(cpu_id.vers.bits.extendedModel == 4) { imc_type = 0x0007; } // HSW-ULT
					break;
				case 0x6:
					if(cpu_id.vers.bits.extendedModel == 3) { 
						imc_type = 0x0009;  // Atom Cedar Trail
						v->fail_safe |= 4; // Disable Core temp
					}
					break;
				case 0xA:
					switch(cpu_id.vers.bits.extendedModel)
					{
						case 0x1:
							imc_type = 0x0001; // Core i7 1st Gen 45 nm (NHME)
							break;
						case 0x2:
							imc_type = 0x0004; // Core 2nd Gen (SNB)
							break;	
						case 0x3:
							imc_type = 0x0006; // Core 3nd Gen (IVB)						
							break;
					}
					break;
				case 0xC:
					switch(cpu_id.vers.bits.extendedModel)
					{
						case 0x1:
							if(cpu_id.vers.bits.stepping > 9) { imc_type = 0x0008; } // Atom PineView	
							v->fail_safe |= 4; // Disable Core temp
							break;	
						case 0x2:
							imc_type = 0x0002; // Core i7 1st Gen 32 nm (WMR)	
							break;	
						case 0x3:
							imc_type = 0x0007; // Core 4nd Gen (HSW)						
							break;
					}
					break;			
				case 0xD:
					imc_type = 0x0005; // SNB-E
					break;				
				case 0xE:
					imc_type = 0x0001; // Core i7 1st Gen 45 nm (NHM)
					break;				
			}
		
		if(imc_type) { tsc_invariable = 1; }
		return;
		}
}

void smp_default_mode(void)
{
	int i, result;
	char *cpupsn = cpu_id.brand_id.char_array;
  char *disabledcpu[] = { "Opteron", "Xeon", "Genuine Intel" };
  
  for(i = 0; i < 3; i++) 
  {
  	result = strstr(cpupsn , disabledcpu[i]);
  	if(result != -1) { v->fail_safe |= 0b10; }
  }
  
  // For 5.01 release, SMP disabled by defualt by config.h toggle
  if(conservative_smp) { v->fail_safe |= 0b10; }
  	
}

/*
 * Find CPU type
 */
void cpu_type(void)
{
	/* If we can get a brand string use it, and we are done */
	if (cpu_id.max_xcpuid >= 0x80000004) {
		cprint(0, COL_MID, cpu_id.brand_id.char_array);
		//If we have a brand string, maybe we have an IMC. Check that.
		detect_imc();
		smp_default_mode();	
		return;
	}

	/* The brand string is not available so we need to figure out 
	 * CPU what we have */
	switch(cpu_id.vend_id.char_array[0]) {
	/* AMD Processors */
	case 'A':
		switch(cpu_id.vers.bits.family) {
		case 4:
			switch(cpu_id.vers.bits.model) {
			case 3:
				cprint(0, COL_MID, "AMD 486DX2");
				break;
			case 7:
				cprint(0, COL_MID, "AMD 486DX2-WB");
				break;
			case 8:
				cprint(0, COL_MID, "AMD 486DX4");
				break;
			case 9:
				cprint(0, COL_MID, "AMD 486DX4-WB");
				break;
			case 14:
				cprint(0, COL_MID, "AMD 5x86-WT");
				break;
			case 15:
				cprint(0, COL_MID, "AMD 5x86-WB");
				break;
			}
			/* Since we can't get CPU speed or cache info return */
			return;
		case 5:
			switch(cpu_id.vers.bits.model) {
			case 0:
			case 1:
			case 2:
			case 3:
				cprint(0, COL_MID, "AMD K5");
				l1_cache = 8;
				break;
			case 6:
			case 7:
				cprint(0, COL_MID, "AMD K6");
				break;
			case 8:
				cprint(0, COL_MID, "AMD K6-2");
				break;
			case 9:
				cprint(0, COL_MID, "AMD K6-III");
				break;
			case 13: 
				cprint(0, COL_MID, "AMD K6-III+"); 
				break;
			}
			break;
		case 6:

			switch(cpu_id.vers.bits.model) {
			case 1:
				cprint(0, COL_MID, "AMD Athlon (0.25)");
				break;
			case 2:
			case 4:
				cprint(0, COL_MID, "AMD Athlon (0.18)");
				break;
			case 6:
				if (l2_cache == 64) {
					cprint(0, COL_MID, "AMD Duron (0.18)");
				} else {
					cprint(0, COL_MID, "Athlon XP (0.18)");
				}
				break;
			case 8:
			case 10:
				if (l2_cache == 64) {
					cprint(0, COL_MID, "AMD Duron (0.13)");
				} else {
					cprint(0, COL_MID, "Athlon XP (0.13)");
				}
				break;
			case 3:
			case 7:
				cprint(0, COL_MID, "AMD Duron");
				/* Duron stepping 0 CPUID for L2 is broken */
				/* (AMD errata T13)*/
				if (cpu_id.vers.bits.stepping == 0) { /* stepping 0 */
					/* Hard code the right L2 size */
					l2_cache = 64;
				} else {
				}
				break;
			}
			break;

			/* All AMD family values >= 10 have the Brand ID
			 * feature so we don't need to find the CPU type */
		}
		break;

	/* Intel or Transmeta Processors */
	case 'G':
		if ( cpu_id.vend_id.char_array[7] == 'T' ) { /* GenuineTMx86 */
			if (cpu_id.vers.bits.family == 5) {
				cprint(0, COL_MID, "TM 5x00");
			} else if (cpu_id.vers.bits.family == 15) {
				cprint(0, COL_MID, "TM 8x00");
			}
			l1_cache = cpu_id.cache_info.ch[3] + cpu_id.cache_info.ch[7];
			l2_cache = (cpu_id.cache_info.ch[11]*256) + cpu_id.cache_info.ch[10];
		} else {				/* GenuineIntel */
			if (cpu_id.vers.bits.family == 4) {
			switch(cpu_id.vers.bits.model) {
			case 0:
			case 1:
				cprint(0, COL_MID, "Intel 486DX");
				break;
			case 2:
				cprint(0, COL_MID, "Intel 486SX");
				break;
			case 3:
				cprint(0, COL_MID, "Intel 486DX2");
				break;
			case 4:
				cprint(0, COL_MID, "Intel 486SL");
				break;
			case 5:
				cprint(0, COL_MID, "Intel 486SX2");
				break;
			case 7:
				cprint(0, COL_MID, "Intel 486DX2-WB");
				break;
			case 8:
				cprint(0, COL_MID, "Intel 486DX4");
				break;
			case 9:
				cprint(0, COL_MID, "Intel 486DX4-WB");
				break;
			}
			/* Since we can't get CPU speed or cache info return */
			return;
		}


		switch(cpu_id.vers.bits.family) {
		case 5:
			switch(cpu_id.vers.bits.model) {
			case 0:
			case 1:
			case 2:
			case 3:
			case 7:
				cprint(0, COL_MID, "Pentium");
				if (l1_cache == 0) {
					l1_cache = 8;
				}
				break;
			case 4:
			case 8:
				cprint(0, COL_MID, "Pentium-MMX");
				if (l1_cache == 0) {
					l1_cache = 16;
				}
				break;
			}
			break;
		case 6:
			switch(cpu_id.vers.bits.model) {
			case 0:
			case 1:
				cprint(0, COL_MID, "Pentium Pro");
				break;
			case 3:
			case 4:
				cprint(0, COL_MID, "Pentium II");
				break;
			case 5:
				if (l2_cache == 0) {
					cprint(0, COL_MID, "Celeron");
				} else {
					cprint(0, COL_MID, "Pentium II");
				}
				break;
			case 6:
				  if (l2_cache == 128) {
					cprint(0, COL_MID, "Celeron");
				  } else {
					cprint(0, COL_MID, "Pentium II");
				  }
				}
				break;
			case 7:
			case 8:
			case 11:
				if (l2_cache == 128) {
					cprint(0, COL_MID, "Celeron");
				} else {
					cprint(0, COL_MID, "Pentium III");
				}
				break;
			case 9:
				if (l2_cache == 512) {
					cprint(0, COL_MID, "Celeron M (0.13)");
				} else {
					cprint(0, COL_MID, "Pentium M (0.13)");
				}
				break;
     			case 10:
				cprint(0, COL_MID, "Pentium III Xeon");
				break;
			case 12:
				l1_cache = 24;
				cprint(0, COL_MID, "Atom (0.045)");
				break;					
			case 13:
				if (l2_cache == 1024) {
					cprint(0, COL_MID, "Celeron M (0.09)");
				} else {
					cprint(0, COL_MID, "Pentium M (0.09)");
				}
				break;
			case 14:
				cprint(0, COL_MID, "Intel Core");
				break;				
			case 15:
				if (l2_cache == 1024) {
					cprint(0, COL_MID, "Pentium E");
				} else {
					cprint(0, COL_MID, "Intel Core 2");
				}
				break;
			}
			break;
		case 15:
			switch(cpu_id.vers.bits.model) {
			case 0:
			case 1:			
			case 2:
				if (l2_cache == 128) {
					cprint(0, COL_MID, "Celeron");
				} else {
					cprint(0, COL_MID, "Pentium 4");
				}
				break;
			case 3:
			case 4:
				if (l2_cache == 256) {
					cprint(0, COL_MID, "Celeron (0.09)");
				} else {
					cprint(0, COL_MID, "Pentium 4 (0.09)");
				}
				break;
			case 6:
				cprint(0, COL_MID, "Pentium D (65nm)");
				break;
			default:
				cprint(0, COL_MID, "Unknown Intel");
 				break;
			break;
		    }

		}
		break;

	/* VIA/Cyrix/Centaur Processors with CPUID */
	case 'C':
		if ( cpu_id.vend_id.char_array[1] == 'e' ) { /* CentaurHauls */
			l1_cache = cpu_id.cache_info.ch[3] + cpu_id.cache_info.ch[7];
			l2_cache = cpu_id.cache_info.ch[11];
			switch(cpu_id.vers.bits.family){
			case 5:
				cprint(0, COL_MID, "Centaur 5x86");
				break;
			case 6: // VIA C3
				switch(cpu_id.vers.bits.model){
				default:
				    if (cpu_id.vers.bits.stepping < 8) {
					cprint(0, COL_MID, "VIA C3 Samuel2");
				    } else {
					cprint(0, COL_MID, "VIA C3 Eden");
				    }
				break;
				case 10:
					cprint(0, COL_MID, "VIA C7 (C5J)");
					l1_cache = 64;
					l2_cache = 128;
					break;
				case 13:
					cprint(0, COL_MID, "VIA C7 (C5R)");
					l1_cache = 64;
					l2_cache = 128;
					break;
				case 15:
					cprint(0, COL_MID, "VIA Isaiah (CN)");
					l1_cache = 64;
					l2_cache = 128;
					break;
				}
			}
		} else {				/* CyrixInstead */
			switch(cpu_id.vers.bits.family) {
			case 5:
				switch(cpu_id.vers.bits.model) {
				case 0:
					cprint(0, COL_MID, "Cyrix 6x86MX/MII");
					break;
				case 4:
					cprint(0, COL_MID, "Cyrix GXm");
					break;
				}
				return;

			case 6: // VIA C3
				switch(cpu_id.vers.bits.model) {
				case 6:
					cprint(0, COL_MID, "Cyrix III");
					break;
				case 7:
					if (cpu_id.vers.bits.stepping < 8) {
						cprint(0, COL_MID, "VIA C3 Samuel2");
					} else {
						cprint(0, COL_MID, "VIA C3 Ezra-T");
					}
					break;
				case 8:
					cprint(0, COL_MID, "VIA C3 Ezra-T");
					break;
				case 9:
					cprint(0, COL_MID, "VIA C3 Nehemiah");
					break;
				}
				// L1 = L2 = 64 KB from Cyrix III to Nehemiah
				l1_cache = 64;
				l2_cache = 64;
				break;
			}
		}
		break;
	/* Unknown processor */
	default:
		/* Make a guess at the family */
		switch(cpu_id.vers.bits.family) {
		case 5:
			cprint(0, COL_MID, "586");
		case 6:
			cprint(0, COL_MID, "686");
		default:
			cprint(0, COL_MID, "Unidentified Processor");
		}
	}
}

#define STEST_ADDR 0x100000	/* Measure memory speed starting at 1MB */

/* Measure and display CPU and cache sizes and speeds */
void cpu_cache_speed()
{
	int i, off = 4;
	ulong speed;


	/* Print CPU speed */
	if ((speed = cpuspeed()) > 0) {
		if (speed < 999499) {
			speed += 50; /* for rounding */
			cprint(1, off, "    . MHz");
			dprint(1, off+1, speed/1000, 3, 1);
			dprint(1, off+5, (speed/100)%10, 1, 0);
		} else {
			speed += 500; /* for rounding */
			cprint(1, off, "      MHz");
			dprint(1, off, speed/1000, 5, 0);
		}
		extclock = speed;
	}

	/* Print out L1 cache info */
	/* To measure L1 cache speed we use a block size that is 1/4th */
	/* of the total L1 cache size since half of it is for instructions */
	if (l1_cache) {
		cprint(2, 0, "L1 Cache:     K  ");
		dprint(2, 11, l1_cache, 3, 0);
		if ((speed=memspeed(STEST_ADDR, (l1_cache/2)*1024, 200))) {
			cprint(2, 16, "       MB/s");
			dprint(2, 16, speed, 6, 0);
		}
	}

	/* Print out L2 cache info */
	/* We measure the L2 cache speed by using a block size that is */
	/* the size of the L1 cache.  We have to fudge if the L1 */
	/* cache is bigger than the L2 */
	if (l2_cache) {
		cprint(3, 0, "L2 Cache:     K  ");
		dprint(3, 10, l2_cache, 4, 0);

		if (l2_cache < l1_cache) {
			i = l1_cache / 4 + l2_cache / 4;
		} else {
			i = l1_cache;
		}
		if ((speed=memspeed(STEST_ADDR, i*1024, 200))) {
			cprint(3, 16, "       MB/s");
			dprint(3, 16, speed, 6, 0);
		}
	}
	/* Print out L3 cache info */
	/* We measure the L3 cache speed by using a block size that is */
	/* 2X the size of the L2 cache. */

	if (l3_cache) 
	{
		cprint(4, 0, "L3 Cache:     K  ");
   	aprint(4, 10, l3_cache/4);
    //dprint(4, 10, l3_cache, 4, 0);
    
    		i = l2_cache*2;
    
    		if ((speed=memspeed(STEST_ADDR, i*1024, 150))) {
    			cprint(4, 16, "       MB/s");
    			dprint(4, 16, speed, 6, 0);
    		}
   }
}

/* Measure and display memory speed, multitasked using all CPUs */
ulong spd[MAX_CPUS];
void get_mem_speed(int me, int ncpus)
{
	int i;
	ulong speed=0;

   /* Determine memory speed.  To find the memory speed we use 
   * A block size that is the sum of all the L1, L2 & L3 caches
	 * in all cpus * 6 */
   i = (l3_cache + l2_cache + l1_cache) * 4;

	/* Make sure that we have enough memory to do the test */
	/* If not use all we have */
	if ((1 + (i * 2)) > (v->plim_upper << 2)) {
		i = ((v->plim_upper <<2) - 1) / 2;
	}
	
	speed = memspeed(STEST_ADDR, i * 1024, 100);
	cprint(5, 16, "       MB/s");
	dprint(5, 16, speed, 6, 0);
	
}

/* #define TICKS 5 * 11832 (count = 6376)*/
/* #define TICKS (65536 - 12752) */
#define TICKS 59659	/* 50 ms */

/* Returns CPU clock in khz */
ulong stlow, sthigh;
static int cpuspeed(void)
{
	int loops;
	ulong end_low, end_high;

	if (cpu_id.fid.bits.rdtsc == 0 ) {
		return(-1);
	}

	/* Setup timer */
	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
	outb(0xb0, 0x43); 
	outb(TICKS & 0xff, 0x42);
	outb(TICKS >> 8, 0x42);

	asm __volatile__ ("rdtsc":"=a" (stlow),"=d" (sthigh));

	loops = 0;
	do {
		loops++;
	} while ((inb(0x61) & 0x20) == 0);

	asm __volatile__ (
		"rdtsc\n\t" \
		"subl stlow,%%eax\n\t" \
		"sbbl sthigh,%%edx\n\t" \
		:"=a" (end_low), "=d" (end_high)
	);

	/* Make sure we have a credible result */
	if (loops < 4 || end_low < 50000) {
		return(-1);
	}
	v->clks_msec = end_low/50;

	if (tsc_invariable) end_low = correct_tsc(end_low);

	return(v->clks_msec);
}

/* Measure cache speed by copying a block of memory. */
/* Returned value is kbytes/second */
ulong memspeed(ulong src, ulong len, int iter)
{
	int i;
	ulong dst, wlen;
	ulong st_low, st_high;
	ulong end_low, end_high;
	ulong cal_low, cal_high;

	if (cpu_id.fid.bits.rdtsc == 0 ) {
		return(-1);
	}
	if (len == 0) return(-2);

	dst = src + len;
	wlen = len / 4;  /* Length is bytes */

	/* Calibrate the overhead with a zero word copy */
	asm __volatile__ ("rdtsc":"=a" (st_low),"=d" (st_high));
	for (i=0; i<iter; i++) {
		asm __volatile__ (
			"movl %0,%%esi\n\t" \
 		 	"movl %1,%%edi\n\t" \
 		 	"movl %2,%%ecx\n\t" \
 		 	"cld\n\t" \
 		 	"rep\n\t" \
 		 	"movsl\n\t" \
			:: "g" (src), "g" (dst), "g" (0)
			: "esi", "edi", "ecx"
		);
	}
	asm __volatile__ ("rdtsc":"=a" (cal_low),"=d" (cal_high));

	/* Compute the overhead time */
	asm __volatile__ (
		"subl %2,%0\n\t"
		"sbbl %3,%1"
		:"=a" (cal_low), "=d" (cal_high)
		:"g" (st_low), "g" (st_high),
		"0" (cal_low), "1" (cal_high)
	);


	/* Now measure the speed */
	/* Do the first copy to prime the cache */
	asm __volatile__ (
		"movl %0,%%esi\n\t" \
		"movl %1,%%edi\n\t" \
 	 	"movl %2,%%ecx\n\t" \
 	 	"cld\n\t" \
 	 	"rep\n\t" \
 	 	"movsl\n\t" \
		:: "g" (src), "g" (dst), "g" (wlen)
		: "esi", "edi", "ecx"
	);
	asm __volatile__ ("rdtsc":"=a" (st_low),"=d" (st_high));
	for (i=0; i<iter; i++) {
	        asm __volatile__ (
			"movl %0,%%esi\n\t" \
			"movl %1,%%edi\n\t" \
 		 	"movl %2,%%ecx\n\t" \
 		 	"cld\n\t" \
 		 	"rep\n\t" \
 		 	"movsl\n\t" \
			:: "g" (src), "g" (dst), "g" (wlen)
			: "esi", "edi", "ecx"
		);
	}
	asm __volatile__ ("rdtsc":"=a" (end_low),"=d" (end_high));

	/* Compute the elapsed time */
	asm __volatile__ (
		"subl %2,%0\n\t"
		"sbbl %3,%1"
		:"=a" (end_low), "=d" (end_high)
		:"g" (st_low), "g" (st_high),
		"0" (end_low), "1" (end_high)
	);
	/* Subtract the overhead time */
	asm __volatile__ (
		"subl %2,%0\n\t"
		"sbbl %3,%1"
		:"=a" (end_low), "=d" (end_high)
		:"g" (cal_low), "g" (cal_high),
		"0" (end_low), "1" (end_high)
	);

	/* Make sure that the result fits in 32 bits */
	//hprint(11,40,end_high);
	if (end_high) {
		return(-3);
	}
	end_low /= 2;

	/* Convert to clocks/KB */
	end_low /= len;
	end_low *= 1024;
	end_low /= iter;
	if (end_low == 0) {
		return(-4);
	}

	/* Convert to kbytes/sec */

	if (tsc_invariable) end_low = correct_tsc(end_low);

	return((v->clks_msec)/end_low);
}

#define rdmsr(msr,val1,val2) \
	__asm__ __volatile__("rdmsr" \
		  : "=a" (val1), "=d" (val2) \
		  : "c" (msr))


ulong correct_tsc(ulong el_org)
{
	float coef_now, coef_max;
	int msr_lo, msr_hi, is_xe;
	
	rdmsr(0x198, msr_lo, msr_hi);
	is_xe = (msr_lo >> 31) & 0x1;		
	
	if(is_xe){
		rdmsr(0x198, msr_lo, msr_hi);
		coef_max = ((msr_hi >> 8) & 0x1F);	
		if ((msr_hi >> 14) & 0x1) { coef_max = coef_max + 0.5f; }
	} else {
		rdmsr(0x17, msr_lo, msr_hi);
		coef_max = ((msr_lo >> 8) & 0x1F);
		if ((msr_lo >> 14) & 0x1) { coef_max = coef_max + 0.5f; }
	}
	
	if(cpu_id.fid.bits.eist) {
		rdmsr(0x198, msr_lo, msr_hi);
		coef_now = ((msr_lo >> 8) & 0x1F);
		if ((msr_lo >> 14) & 0x1) { coef_now = coef_now + 0.5f; }
	} else {
		rdmsr(0x2A, msr_lo, msr_hi);
		coef_now = (msr_lo >> 22) & 0x1F;
	}
	if(coef_max && coef_now) {
		el_org = (ulong)(el_org * coef_now / coef_max);
	}
	return el_org;
}