Sequence highlight does not connect properly

[danieldegroot2]

Sequence highlight does not connect properly
https://mapilio.com/app?lat=32.866390341184015&lng=-17.1661447401882&zoom=17.745187743809705
(at both the roundabout and the junction to the east/right)

It is clearly part of the same sequence (sequence is highlighted when hovering over images, going prev/next image works fine)
Images are close enough to each other to have connecting sequence highlight.

This issue may be present elsewhere, but I have not specifically checked.

cc: @ozcan-durak

[sezerbozbiyik]

@danieldegroot2

Thank you for your report.
The issue has been noted and is currently under review.
We will provide feedback once the necessary checks have been completed.

We appreciate your observation and contribution.

[chrisdebian]

Hi,

Bumping this as it appears to still be present at the linked coordinates.

One observation that might help narrow it down: since hovering and prev/next navigation both work correctly, the sequence relationships in the data are intact — the break is specific to the polyline rendering. A common cause for this pattern at roundabouts and junctions is a maximum straight-line distance (or maximum bearing-change) threshold used when deciding whether to draw a segment between consecutive images. At a tight curve, consecutive images can be close along the road but far enough apart in a straight line, or at a sharp enough bearing change, to exceed the threshold.

If that is the mechanism, using sequence order directly (rather than proximity) to draw the connecting line would resolve it.

Thanks, Chris