Microbit:V2 Deployment and an Issue.

[VincentKaufmann]

Im trying to deploy it on a Microbit:v2.

1. The public key is supposed to be 28 digits. I just generated a 28 digit string such as: MIGeMA0GCSqGSIb3DQEBAQUAA4GM Is that okay what public/private key should I generate and where should I store the private key or is the public key just a term for a 28 digit identifier in this case?

2. Firmware: I cd into the offline-finding directory and I run make, I get ../blessed/examples/Makefile.common:6: *** PLATFORM is not defined. Stop. How do I configure it for the Microbit:v2? I see in the git repo "blessed" and I figured I have to configure blessed for the Microbit:v2 right?

[VincentKaufmann]

I figured out I was in the wrong directory. From the following directory: Microbit_v1 I can make the firmware but when I try to install it with: make install DEPLOY_PATH=/Volumes/MICROBIT.

Here is the build log:

/Library/Developer/CommandLineTools/usr/bin/make -C blessed make[1]: Nothing to be done for all'.
/Library/Developer/CommandLineTools/usr/bin/make -C offline-finding
-e MKDIR build
-e CC main.c
-e LD build/offline-finding.out
/Applications/ArmGNUToolchain/12.2.rel1/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/12.2.1/../../../../arm-none-eabi/bin/ld: /Applications/ArmGNUToolchain/12.2.rel1/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/12.2.1/../../../../arm-none-eabi/lib/thumb/v6-m/nofp/libc_nano.a(libc_a-closer.o): in function _close_r': closer.c:(.text._close_r+0xc): warning: _close is not implemented and will always fail /Applications/ArmGNUToolchain/12.2.rel1/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/12.2.1/../../../../arm-none-eabi/bin/ld: /Applications/ArmGNUToolchain/12.2.rel1/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/12.2.1/../../../../arm-none-eabi/lib/thumb/v6-m/nofp/libc_nano.a(libc_a-lseekr.o): in function _lseek_r':
lseekr.c:(.text._lseek_r+0x10): warning: _lseek is not implemented and will always fail
/Applications/ArmGNUToolchain/12.2.rel1/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/12.2.1/../../../../arm-none-eabi/bin/ld: /Applications/ArmGNUToolchain/12.2.rel1/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/12.2.1/../../../../arm-none-eabi/lib/thumb/v6-m/nofp/libc_nano.a(libc_a-readr.o): in function _read_r': readr.c:(.text._read_r+0x10): warning: _read is not implemented and will always fail /Applications/ArmGNUToolchain/12.2.rel1/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/12.2.1/../../../../arm-none-eabi/bin/ld: /Applications/ArmGNUToolchain/12.2.rel1/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/12.2.1/../../../../arm-none-eabi/lib/thumb/v6-m/nofp/libc_nano.a(libc_a-writer.o): in function _write_r':
writer.c:(.text._write_r+0x10): warning: _write is not implemented and will always fail
-e SIZE build/offline-finding.out
text data bss dec hex filename
15580 180 904 16664 4118 build/offline-finding.out
-e OBJCOPY build/offline-finding.bin`

I get a notification on my MacBook:
Disk not Ejected Properly. Eject Microbit before disconnecting or turning it off. Inside /Volumes/MICROBIT I got three files.

1. FAIL.TXT:
   error: The application image is not compatible with the target.
   type: user

2. DETAILS.TXT:

DAPLink Firmware - see https://daplink.io

Build ID: v0257-gc782a5ba (gcc)
Unique ID: 9906360200052820f9b1ccf9e7bfaa71000000006e052820
HIC ID: 6e052820
Auto Reset: 1
Automation allowed: 0
Overflow detection: 0
Incompatible image detection: 1
Page erasing: 0
Daplink Mode: Interface
Interface Version: 0257
Bootloader Version: 0257
Git SHA: c782a5ba907377658bc28aa8d132a0fa44543687
Local Mods: 0
USB Interfaces: MSD, CDC, HID, WebUSB
Bootloader CRC: 0x725bea7d
Interface CRC: 0xe561f1de
Remount count: 4
URL: https://microbit.org/device/?id=9906&v=0257

3. MICROBIT.HTM

[VincentKaufmann]

I just figured it out:

Micro:bit V2 is using the nRF52833 chip. Micro:bit V1 is based on the nRF51822 chip.

In the following directory there is the platform specified: Microbit_v1/blessed/platform.

Where can I get the correct blessed platform files for the nRF52833 chip?

[koenvervloesem]

The blessed repo says:

Currently, only the nRF51822 SoC from Nordic Semiconductor is supported.

You can always try my Zephyr-based OpenHaystack firmware. The BBC micro:bit v2 is one of the devices I tested it on.

[VincentKaufmann]

The blessed repo says:

Currently, only the nRF51822 SoC from Nordic Semiconductor is supported.

You can always try my Zephyr-based OpenHaystack firmware. The BBC micro:bit v2 is one of the devices I tested it on.

I try it out! Will follow your guide to flash the firmware. Is there anything I need to watch out for? It will run with the stock OpenHaystack software right?

Thank you

[koenvervloesem]

If you encounter some issues, please open an issue in my repository, I'm happy to help there.

It will run with the stock OpenHaystack software right?

It works with OpenHaystack's macOS application, yes.

[VincentKaufmann]

If you encounter some issues, please open an issue in my repository, I'm happy to help there.

It will run with the stock OpenHaystack software right?

It works with OpenHaystack's macOS application, yes.

I get this: zsh: command not found: west

Just a question, what is west? I see a west.yml file, how do I use it? Is west a pre-requisit?

[VincentKaufmann]

If you encounter some issues, please open an issue in my repository, I'm happy to help there.

It will run with the stock OpenHaystack software right?

It works with OpenHaystack's macOS application, yes.

Could you upload a pre-build firmware for the V2 that I could use to play around with OpenHaystack?

[koenvervloesem]

I get this: zsh: command not found: west

Just a question, what is west? I see a west.yml file, how do I use it? Is west a pre-requisit?

Please install the requirements:

A Zephyr development environment

[Sn0wfreezeDev]

There's also a Microbit_v2 firmware which works. #84