Minor suggestion for Battery dock

[alan412]

It would be great if the LED was next to the switch so it is easier to find the switch on a robot. Otherwise the LED might be buried in the robot but we know the switch needs to be accessible.

Also, either a raised area around the switch or connection points to make it easy to 3d print would be great to keep switches from being accidentally turned off from game elements.

[Peyton-Yeung]

We're finding access to get the battery out a little tricky. Being able to get your fingers around the battery to press the buttons for release is tough even with larger hands. It definitely seems like this will want to be mounted so the battery is pulled up out of a robot vs horizontally.

Agree on the led position. We honestly didn't notice it until we accidently flipped the switch with a battery installed. We definitely flipped the switch unintendly so a guard or a harder to flip switch would be nice.

Would request the addition of any of the dock to include #10 mounting holes for use in the Robits System (or atleast some of the existing holes to line up with a 1/2" spacing for cable ties to fit on Robits.