feat(container): update image ghcr.io/home-operations/esphome ( 2026.1.3 ➔ 2026.2.4 )

[mortyops]

This PR contains the following updates:

Package	Update	Change
ghcr.io/home-operations/esphome (source)	minor	2026.1.3 → 2026.2.4

---

Release Notes

esphome/esphome (ghcr.io/home-operations/esphome)

v2026.2.4

Compare Source

v2026.2.3

Compare Source

• [mqtt] Remove broken ESP8266 ssl_fingerprints option esphome#14182 by @​bdraco (breaking-change)
• [sprinkler] Fix millis overflow and underflow bugs esphome#14299 by @​swoboda1337
• [cc1101] Transition through IDLE in begin_tx/begin_rx for reliable state changes esphome#14321 by @​swoboda1337
• [zigbee] Fix codegen ordering for basic/identify attribute lists esphome#14343 by @​swoboda1337
• [uart] Revert UART0 default pin workarounds (fixed in ESP-IDF 5.5.2) esphome#14363 by @​bdraco
• [mipi_dsi] Fix Waveshare P4 7B board config esphome#14372 by @​clydebarrow
• [core] Defer entity automation codegen to prevent sibling ID deadlocks esphome#14381 by @​swoboda1337
• [improv_serial] Add missing USE_IMPROV_SERIAL define to fix WiFi scan filtering esphome#14359 by @​bdraco
• [uart] Fix flow_control_pin inverted flag ignored on ESP-IDF esphome#14410 by @​swoboda1337

v2026.2.2

Compare Source

• [max7219digit] Fix typo in action names esphome#14162 by @​swoboda1337
• [mipi_dsi] Disallow swap_xy esphome#14124 by @​clydebarrow
• [dsmr] Add deprecated std::string overload for set_decryption_key esphome#14180 by @​bdraco
• [api] Fix build error when lambda returns StringRef in homeassistant.event data esphome#14187 by @​bdraco
• [haier] Fix uninitialized HonSettings causing API connection failures esphome#14188 by @​bdraco
• [bme68x_bsec2] Fix compilation on ESP32 Arduino esphome#14194 by @​bdraco
• [network] Improve IPAddress::str() deprecation warning with usage example esphome#14195 by @​bdraco
• [water_heater] Fix device_id missing from state responses esphome#14212 by @​bdraco
• [mipi_dsi] Allow transform disable; fix warnings esphome#14216 by @​clydebarrow (new-feature)
• [http_request.ota] Percent-encode credentials in URL esphome#14257 by @​swoboda1337
• Don't get stuck forever on a failed component can_proceed esphome#14267 by @​jesserockz
• [pid] Fix deadband threshold conversion for Fahrenheit esphome#14268 by @​swoboda1337
• [ld2420] Fix sizeof vs value bug in register memcpy esphome#14286 by @​swoboda1337
• [rtttl] Fix speaker playback bugs esphome#14280 by @​swoboda1337
• [hmc5883l] Fix wrong gain for 88uT range esphome#14281 by @​swoboda1337
• [sensor] Fix delta filter percentage mode regression esphome#14302 by @​swoboda1337

v2026.2.1

Compare Source

• [esp32_ble_server] fix infinitely large characteristic value esphome#14011 by @​Rapsssito
• [udp] Register socket consumption for CONFIG_LWIP_MAX_SOCKETS esphome#14068 by @​bdraco
• [web_server] Double socket allocation to prevent connection exhaustion esphome#14067 by @​bdraco
• [pulse_counter] Fix compilation on ESP32-C6/C5/H2/P4 esphome#14070 by @​bdraco
• [web_server] Fix water_heater JSON key names and move traits to DETAIL_ALL esphome#14064 by @​bdraco
• [ld2420] Use constexpr for compile-time constants esphome#14079 by @​bdraco
• [e131] Fix E1.31 on ESP8266 and RP2040 by restoring WiFiUDP support esphome#14086 by @​bdraco
• [socket] Fix IPv6 compilation error on host platform esphome#14101 by @​swoboda1337
• [ethernet] Improve clk_mode deprecation warning with actionable YAML esphome#14104 by @​swoboda1337
• [pulse_counter] Fix build failure when use_pcnt is false esphome#14111 by @​swoboda1337
• [esp32_ble] Enable CONFIG_BT_RELEASE_IRAM on ESP32-C2 esphome#14109 by @​bdraco
• [safe_mode] Log brownout as reset reason on OTA rollback esphome#14113 by @​swoboda1337
• [wifi] Sync output_power with PHY max TX power to prevent brownout esphome#14118 by @​swoboda1337
• [uart] Always call pin setup for UART0 default pins on ESP-IDF esphome#14130 by @​bdraco
• [pulse_counter] Fix PCNT glitch filter calculation off by 1000x esphome#14132 by @​swoboda1337
• [ld2450] Add frame header synchronization to readline_() esphome#14135 by @​swoboda1337
• [ld2410] Add frame header synchronization to readline_() esphome#14136 by @​swoboda1337
• [ld2420] Increase MAX_LINE_LENGTH to allow footer-based resync esphome#14137 by @​swoboda1337
• [ld2410/ld2450] Replace header sync with buffer size increase for frame resync esphome#14138 by @​swoboda1337

v2026.2.0

Compare Source

https://esphome.io/changelog/2026.2.0.html

v2026.1.5

Compare Source

• [rd03d] Revert incorrect field order swap esphome#13769 by @​jasstrong
• [core] Add capacity check to register_component_ esphome#13778 by @​swoboda1337
• [ota] Fix CLI upload option shown when only http_request platform configured esphome#13784 by @​swoboda1337
• [dashboard] Close WebSocket after process exit to prevent zombie connections esphome#13834 by @​bdraco
• [nrf52,logger] fix printk esphome#13874 by @​tomaszduda23
• [lvgl] Fix crash with unconfigured top_layer esphome#13846 by @​clydebarrow
• [esp32] Set UV_CACHE_DIR inside data dir so Clean All clears it esphome#13888 by @​swoboda1337
• [aqi] Fix AQI calculation for specific pm2.5 or pm10 readings esphome#13770 by @​xconverge

v2026.1.4

Compare Source

• [mipi_spi] Fix log_pin() FlashStringHelper compatibility esphome#13624 by @​J0k3r2k1
• [max7219] Allocate buffer in constructor esphome#13660 by @​swoboda1337
• [mqtt] resolve warnings related to use of ip.str() esphome#13719 by @​rwrozelle
• [core] Add missing uint32_t ID overloads for defer() and cancel_defer() esphome#13720 by @​bdraco
• [http_request] Fix requests taking full timeout when response is already complete esphome#13649 by @​bdraco
• [cse7766] Fix power reading stuck when load switches off esphome#13734 by @​bdraco
• [wifi] Fix wifi.connected condition returning false in connect state listener automations esphome#13733 by @​bdraco
• [ultrasonic] adjust timeouts and bring the parameter back esphome#13738 by @​ssieb

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about these updates again.

---

• If you want to rebase/retry this PR, check this box

---

This PR has been generated by Renovate Bot.

[mortyops]

--- kubernetes/apps/home-automation/esphome/app Kustomization: home-automation/esphome HelmRelease: home-automation/esphome

+++ kubernetes/apps/home-automation/esphome/app Kustomization: home-automation/esphome HelmRelease: home-automation/esphome

@@ -38,13 +38,13 @@

         annotations:
           secret.reloader.stakater.com/reload: esphome-secrets,esphome-deploykey
         containers:
           app:
             image:
               repository: ghcr.io/home-operations/esphome
-              tag: 2026.1.3
+              tag: 2026.2.4
             probes:
               liveness:
                 enabled: false
               readiness:
                 enabled: false
               startup:

[mortyops]

--- HelmRelease: home-automation/esphome Deployment: home-automation/esphome

+++ HelmRelease: home-automation/esphome Deployment: home-automation/esphome

@@ -46,13 +46,13 @@

         runAsUser: 2000
       hostIPC: false
       hostNetwork: false
       hostPID: false
       dnsPolicy: ClusterFirst
       containers:
-      - image: ghcr.io/home-operations/esphome:2026.1.3
+      - image: ghcr.io/home-operations/esphome:2026.2.4
         name: app
         resources:
           limits:
             memory: 3072Mi
           requests:
             cpu: 5m