Dragon burner backplate mod.

UserMods/MRSalguod/Dragon Burner Backplate with pins up 8mm/Readme.md

@@ -0,0 +1,89 @@
+### Information:
+
+  My Anthead was knocking my Dragon Burner out of its dock when picking it up. 
+  So I move the pins on the Dragon Burner up 8mm to be more in line with my other tools.  
+
+### My Modifications:
+
+  I modified the [back plate](https://github.com/DraftShift/StealthChanger/blob/main/CAD/Backplates/DragonBurner.step))  cad files from the Draftshift design github. The [Orbiter V2.0 Spacer](https://github.com/zruncho3d/nudge/tree/main](https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner/CAD)) was modified from the official
+  Dragon Burner github cad files. 
+
+### BOM:
+
+  Backplate hardware should be the same. 8mm longer screws are needed for the Orbiter V2.0.
+
+  ### Pictures:
+
+  Before
+
+  ![Before.jpg](./images/Before.jpg)
+
+  After
+
+  ![After.jpg](./images/After.jpg)
+
+  Front
+
+  ![Front.jpg](./images/Front.jpg)
+
+  Rear
+
+  ![Rear.jpg](./images/Rear.jpg)
+
+  Side
+
+  ![Side.jpg](./images/Side.jpg)
+
+  Modified Left Original Right Rear View
+
+  ![Modified-Left-Original-Right-Rear-View.png](./images/Modified-Left-Original-Right-Rear-View.png) 
+
+  Modified Right Original Left Front View
+
+  ![Modified-Right-Original-Left-Front-View.png](./images/Modified-Right-Original-Left-Front-View.png)
+
+  Backplate
+
+  ![Backplate.png](./images/Backplate.png)
+
+  Spacer
+
+  ![Spacer.png](./images/Spacer.png)
+
+
+### License: 
+
+  (Shared the same as the original) 
+
+  Both original files are shared under the GPL-3.0 license
+
+  GNU General Public License v3.0 
+
+  ✖ | Sharing without ATTRIBUTION
+
+  ✔ | Remix Culture allowed
+
+  ✔ | Commercial Use
+
+  ✔ | Meets Open Definition
+
+  ℹ | Share under the same license
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+