Bump nokogiri from 1.10.5 to 1.11.5

[dependabot]

Bumps nokogiri from 1.10.5 to 1.11.5.

Release notes

Sourced from nokogiri's releases.

1.11.5 / 2021-05-19

Fixed

[Windows CRuby] Work around segfault at process exit on Windows when using libxml2 system DLLs.

libxml 2.9.12 introduced new behavior to avoid memory leaks when unloading libxml2 shared libraries (see libxml/!66). Early testing caught this segfault on non-Windows platforms (see #2059 and libxml@956534e) but it was incompletely fixed and is still an issue on Windows platforms that are using system DLLs.

We work around this by configuring libxml2 in this situation to use its default memory management functions. Note that if Nokogiri is not on Windows, or is not using shared system libraries, it will will continue to configure libxml2 to use Ruby's memory management functions. Nokogiri::VERSION_INFO["libxml"]["memory_management"] will allow you to verify when the default memory management functions are being used. [#2241]

Added

Nokogiri::VERSION_INFO["libxml"] now contains the key "memory_management" to declare whether libxml2 is using its default memory management functions, or whether it uses the memory management functions from ruby. See above for more details.

1.11.4 / 2021-05-14

Security

[CRuby] Vendored libxml2 upgraded to v2.9.12 which addresses:

• CVE-2019-20388
• CVE-2020-24977
• CVE-2021-3517
• CVE-2021-3518
• CVE-2021-3537
• CVE-2021-3541

Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).

Please see nokogiri/GHSA-7rrm-v45f-jp64 or #2233 for a more complete analysis of these CVEs and patches.

Dependencies

• [CRuby] vendored libxml2 is updated from 2.9.10 to 2.9.12. (Note that 2.9.11 was skipped because it was superseded by 2.9.12 a few hours after its release.)

1.11.3 / 2021-04-07

Fixed

• [CRuby] Passing non-Node objects to Document#root= now raises an ArgumentError exception. Previously this likely segfaulted. [#1900]
• [JRuby] Passing non-Node objects to Document#root= now raises an ArgumentError exception. Previously this raised a TypeError exception.
• [CRuby] arm64/aarch64 systems (like Apple's M1) can now compile libxml2 and libxslt from source (though we continue to strongly advise users to install the native gems for the best possible experience)

1.11.2 / 2021-03-11

... (truncated)

Changelog

Sourced from nokogiri's changelog.

1.11.5 / 2021-05-19

Fixed

[Windows CRuby] Work around segfault at process exit on Windows when using libxml2 system DLLs.

libxml 2.9.12 introduced new behavior to avoid memory leaks when unloading libxml2 shared libraries (see libxml/!66). Early testing caught this segfault on non-Windows platforms (see #2059 and libxml@956534e) but it was incompletely fixed and is still an issue on Windows platforms that are using system DLLs.

We work around this by configuring libxml2 in this situation to use its default memory management functions. Note that if Nokogiri is not on Windows, or is not using shared system libraries, it will will continue to configure libxml2 to use Ruby's memory management functions. Nokogiri::VERSION_INFO["libxml"]["memory_management"] will allow you to verify when the default memory management functions are being used. [#2241]

Added

Nokogiri::VERSION_INFO["libxml"] now contains the key "memory_management" to declare whether libxml2 is using its default memory management functions, or whether it uses the memory management functions from ruby. See above for more details.

1.11.4 / 2021-05-14

Security

[CRuby] Vendored libxml2 upgraded to v2.9.12 which addresses:

• CVE-2019-20388
• CVE-2020-24977
• CVE-2021-3517
• CVE-2021-3518
• CVE-2021-3537
• CVE-2021-3541

Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).

Please see nokogiri/GHSA-7rrm-v45f-jp64 or #2233 for a more complete analysis of these CVEs and patches.

Dependencies

• [CRuby] vendored libxml2 is updated from 2.9.10 to 2.9.12. (Note that 2.9.11 was skipped because it was superseded by 2.9.12 a few hours after its release.)

1.11.3 / 2021-04-07

Fixed

• [CRuby] Passing non-Node objects to Document#root= now raises an ArgumentError exception. Previously this likely segfaulted. [#1900]
• [JRuby] Passing non-Node objects to Document#root= now raises an ArgumentError exception. Previously this raised a TypeError exception.
• [CRuby] arm64/aarch64 systems (like Apple's M1) can now compile libxml2 and libxslt from source (though we continue to strongly advise users to install the native gems for the best possible experience)

1.11.2 / 2021-03-11

... (truncated)

Commits

• e43f521 version bump to v1.11.5
• 42354e4 Merge pull request #2243 from sparklemotion/flavorjones-v1_11_x-update-tests-...
• 05f30eb update CHANGELOG
• e6709aa windows: work around libxml2 xmlCleanupParser
• 8f54c0f test: adjust tests to pass on system libxml2 >= 2.9.11
• 3d8a570 ci: windows config for github actions
• 4b9bfe3 update CHANGELOG with the GHSA
• 9d69b44 version bump to v1.11.4
• 058e87f update CHANGELOG with complete CVE information
• 9285251 Merge pull request #2234 from sparklemotion/2233-upgrade-to-libxml-2-9-12
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
• @dependabot use these labels will set the current labels as the default for future PRs for this repo and language
• @dependabot use these reviewers will set the current reviewers as the default for future PRs for this repo and language
• @dependabot use these assignees will set the current assignees as the default for future PRs for this repo and language
• @dependabot use this milestone will set the current milestone as the default for future PRs for this repo and language

You can disable automated security fix PRs for this repo from the Security Alerts page.

[github-learning-lab]

I was expecting your file to be named _posts/0000-01-02-Ikhal.md.

Let's edit this pull request to fix both of these issues.

⌨️ Activity: Fixing your pull request

1. Click the Files Changed tab in this pull request
2. Verify that the only file edited is named _posts/0000-01-02-Ikhal.md.
3. If the file is improperly named, or not in an improper location, click on the pencil icon found on the right side of the screen to edit it.
4. Above the contents of the file, select all text in the field that contains the filename and delete it.
5. Continue pressing your backspace key to also delete any directory names that exist.
6. Type the proper filename:

   _posts/0000-01-02-Ikhal.md

7. Scroll to the bottom and enter a commit message and commit in the Commit Changes section.

If you would like assistance troubleshooting the issue you are encountering, create a post on the GitHub Community board. You might also want to search for your issue to see if other people have resolved it in the past.

---

I'll respond below when I detect a commit on this branch.

[dependabot]

Superseded by #5.