AIM:
To implement Encoder 8 To 3 in Dataflow Modelling using verilog and validating their functionality using their functional tables
SOFTWARE REQUIRED: Quartus prime
THEORY:
Encoder 8 To 3
The 8 to 3 line Encoder is also known as Octal to Binary Encoder. In 8 to 3 line encoder, there is a total of eight inputs, i.e., D0, D1, D2, D3, D4, D5, D6, and D7 and three outputs, i.e., A0, A1, and A2. In 8-input lines, one input-line is set to true at a time to get the respective binary code in the output side. Below are the block diagram and the truth table of the 8 to 3 line encoder.
Figure 01 Block Diagram of Encoder 8 * 3
Truth Table
The logical expression of the term A0, A1, and A2 are as follows:
A0 = D1 + D3 + D5 + D7
A1 = D2 + D3 + D6 + D7
A2 = D4 + D5 + D6 + D7
Logical circuit of the above expressions is given below:
Figure 02 Encoder 8 * 3
Procedure
https://raw.githubusercontent.com/MITHUN8521/ENCODER8TO3DATAFLOW/main/simulation/modelsim/DATAFLOW-ENCODE-T-2.7.zip the program in Quartus software.
https://raw.githubusercontent.com/MITHUN8521/ENCODER8TO3DATAFLOW/main/simulation/modelsim/DATAFLOW-ENCODE-T-2.7.zip and run the program.
https://raw.githubusercontent.com/MITHUN8521/ENCODER8TO3DATAFLOW/main/simulation/modelsim/DATAFLOW-ENCODE-T-2.7.zip the RTL schematic and save the logic diagram.
https://raw.githubusercontent.com/MITHUN8521/ENCODER8TO3DATAFLOW/main/simulation/modelsim/DATAFLOW-ENCODE-T-2.7.zip nodes for inputs and outputs to generate the timing diagram.
https://raw.githubusercontent.com/MITHUN8521/ENCODER8TO3DATAFLOW/main/simulation/modelsim/DATAFLOW-ENCODE-T-2.7.zip different input combinations generate the timing diagram.
PROGRAM
/* Program for Encoder 8 To 3 in Dataflow Modelling and verify its truth table in quartus using Verilog programming.
module encoder_top(din, a, b, c);
input [0:7] din;
output a,b,c;
assign a=din[4] | din[5] | din[6] | din[7];
assign b=din[2] | din[3] | din[6] | din[7];
assign c=din[2] | din[4] | din[6] | din[7];
endmodule
Developed by: MITHUN KUMAR S
RegisterNumber: 212223050029
*/
Thus the code is ececuted successfully.