Add initial K3 AM62L SoC and EVM support

boards/ti/am62l_evm/Kconfig.am62l_evm

@@ -0,0 +1,8 @@
+# Texas Instruments Sitara AM62L EVM
+#
+# Copyright (c) 2025 Texas Instruments Incorporated
+#
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_AM62L_EVM
+	select SOC_AM62L3_A53

boards/ti/am62l_evm/am62l_evm_am62l3_a53-pinctrl.dtsi

@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&wkup_pinctrl {
+	status = "okay";
+
+	uart0_rx_default: uart0_rx_default {
+		pinmux = <K3_PINMUX(0x1b4, PIN_INPUT, MUX_MODE_0)>; /* (D13) UART0_RXD */
+	};
+
+	uart0_tx_default: uart0_tx_default {
+		pinmux = <K3_PINMUX(0x1b8, PIN_OUTPUT, MUX_MODE_0)>; /* (C13) UART0_TXD */
+	};
+};

boards/ti/am62l_evm/am62l_evm_am62l3_a53.dts

@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+
+#include <ti/am62l3_a53.dtsi>
+#include "am62l_evm_am62l3_a53-pinctrl.dtsi"
+
+/ {
+	model = "TI AM62L EVALUATION MODULE (EVM)";
+	compatible = "ti,am62l_evm";
+
+	chosen {
+		zephyr,console = &main_uart0;
+		zephyr,shell-uart = &main_uart0;
+		zephyr,sram = &ddr0;
+	};
+
+	cpus {
+		cpu@0 {
+			status = "okay";
+		};
+
+		cpu@1 {
+			status = "okay";
+		};
+	};
+
+	ddr0: memory@82000000 {
+		reg = <0x82000000 (DT_SIZE_G(2) - DT_SIZE_M(32))>;
+	};
+};
+
+&main_uart0 {
+	current-speed = <115200>;
+	pinctrl-0 = <&uart0_rx_default>,
+		    <&uart0_tx_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};

boards/ti/am62l_evm/am62l_evm_am62l3_a53.yaml

@@ -0,0 +1,15 @@
+identifier: am62l_evm/am62l3/a53
+name: TI AM62L Evaluation Module (EVM)
+type: mcu
+arch: arm64
+toolchain:
+  - zephyr
+  - cross-compile
+ram: 2048
+supported:
+  - uart
+testing:
+  ignore_tags:
+    - net
+    - bluetooth
+vendor: ti

boards/ti/am62l_evm/am62l_evm_am62l3_a53_defconfig

@@ -0,0 +1,32 @@
+# Texas Instruments Sitara AM62L EVM
+#
+# Copyright (c) 2025 Texas Instruments Incorporated
+#
+# SPDX-License-Identifier: Apache-2.0
+
+# Zephyr Kernel Configuration
+CONFIG_XIP=n
+
+# Serial Driver
+CONFIG_SERIAL=y
+
+# Enable Console
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+
+# ARM Options
+CONFIG_AARCH64_IMAGE_HEADER=y
+CONFIG_ARMV8_A_NS=y
+CONFIG_ARM64_VA_BITS_36=y
+CONFIG_ARM64_PA_BITS_36=y
+
+# Cache Options
+CONFIG_CACHE_MANAGEMENT=y
+CONFIG_DCACHE_LINE_SIZE_DETECT=y
+CONFIG_ICACHE_LINE_SIZE_DETECT=y
+
+# Multicore Support
+CONFIG_SMP=y
+CONFIG_PM_CPU_OPS=y
+CONFIG_MP_MAX_NUM_CPUS=2

boards/ti/am62l_evm/board.yml

@@ -0,0 +1,6 @@
+board:
+  name: am62l_evm
+  full_name: AM62L TMDS62LEVM evaluation module (EVM)
+  vendor: ti
+  socs:
+  - name: am62l3

boards/ti/am62l_evm/doc/index.rst

@@ -0,0 +1,109 @@
+.. zephyr:board:: am62l_evm
+
+Overview
+********
+
+The AM62L EVM board configuration is used by Zephyr applications that run on
+the TI AM62L platform. The board configuration provides support for:
+
+- ARM Cortex-A53 core and the following features:
+
+   - General Interrupt Controller (GIC)
+   - ARM Generic Timer (arch_timer)
+   - On-chip SRAM (oc_sram)
+   - UART interfaces (uart0 to uart6)
+
+The board configuration also enables support for the semihosting debugging console.
+
+See the `TI AM62L Product Page`_ for details.
+
+Hardware
+********
+The AM62L EVM features the AM62L SoC, which is composed of a dual Cortex-A53
+cluster. The following listed hardware specifications are used:
+
+- High-performance ARM Cortex-A53
+- Memory
+
+   - 160KB of SRAM
+   - 2GB of DDR4
+
+- Debug
+
+   - XDS110 based JTAG
+
+Supported Features
+==================
+
+.. zephyr:board-supported-hw::
+
+Devices
+========
+System Clock
+------------
+
+This board configuration uses a system clock frequency of 1250 MHz.
+
+DDR RAM
+-------
+
+The board has 2GB of DDR RAM available.
+
+Serial Port
+-----------
+
+This board configuration uses a single serial communication channel with the
+MAIN domain UART (main_uart0).
+
+SD Card
+*******
+
+Download TI's official `WIC`_ and flash the WIC file with an etching software
+onto an SD-card.
+
+Copy the compiled ``zephyr.bin`` to the first FAT partition of the SD card and
+plug the SD card into the board. Power it up and stop the u-boot execution at
+prompt.
+
+Use U-Boot to load and start zephyr.bin:
+
+.. code-block:: console
+
+    fatload mmc 1:1 0x82000000 zephyr.bin; dcache flush; icache flush; dcache off; icache off; go 0x82000000
+
+The Zephyr application should start running on the A53 core.
+
+Debugging
+*********
+
+The board is equipped with an XDS110 JTAG debugger. To debug a binary, utilize the ``debug`` build target:
+
+.. zephyr-app-commands::
+   :app: <my_app>
+   :board: am62l_evm/am62l3/a53
+   :maybe-skip-config:
+   :goals: debug
+
+.. hint::
+   To utilize this feature, you'll need OpenOCD version 0.12 or higher. Due to the possibility of
+   older versions being available in package feeds, it's advisable to `build OpenOCD from source`_.
+
+References
+**********
+
+https://www.ti.com/tool/TMDS62LEVM
+
+.. _AM62L EVM TRM:
+   https://www.ti.com/lit/pdf/SPRUJG8
+
+.. _TI AM62L Product Page:
+   https://www.ti.com/product/AM62L
+
+.. _WIC:
+   https://dr-download.ti.com/software-development/software-development-kit-sdk/MD-PvdSyIiioq/10.01.10.04/tisdk-default-image-am62xx-evm-10.01.10.04.rootfs.wic.xz
+
+.. _EVM User's Guide:
+   https://www.ti.com/lit/pdf/SPRUJG8
+
+.. _build OpenOCD from source:
+   https://docs.u-boot.org/en/latest/board/ti/k3.html#building-openocd-from-source