Skip to content

amattas/pydmp

BranchesTags

Repository files navigation

PyDMP

Python library for controlling DMP (Digital Monitoring Products) alarm systems

CI Docs Workflow Pages Python License

PyDMP is a standalone, platform-agnostic Python library for interfacing with DMP alarm panels via TCP/IP. It provides both asynchronous and synchronous APIs with full type hints, comprehensive error handling, and automatic rate limiting.

Status: Work in progress — under active development. Interfaces and CLI commands may change between releases.

Features

  • Low-level protocol communication with DMP panels
  • High-level abstractions (panels, areas, zones, outputs)
  • Both sync and async APIs with automatic rate limiting
  • Full type hints and comprehensive error handling
  • LFSR encryption for user codes
  • CLI tool for command-line control
  • Platform-independent — not tied to any home automation system

Panel Compatibility

PyDMP has been fully tested with the DMP XR150 panel. Other DMP panels using the same TCP/IP protocol should work, but have not been extensively tested.

For detailed compatibility information, see the Panel Compatibility documentation, which includes:

  • Tested panel models and firmware versions
  • Feature compatibility matrices
  • Network topology compatibility
  • Community compatibility reports
  • How to report compatibility with your panel

Installation

pip install pydmp

CLI Tool Installation

For the command-line interface:

pip install pydmp[cli]

Development Installation

For development with tests:

pip install -e ".[dev]"

CLI Overview

PyDMP includes a CLI for common operations. See the full guide: docs/guide/cli.md

  • Global options

    • --config, -c PATH — path to YAML file (default: config.yaml)
    • --quiet, -q — reduced logging (WARNING)
    • --debug, -d — debug logging (overrides other flags)
    • --version, -v — show version and exit
    • --help, -h — show help

  • Common option

    • --json, -j — JSON output where supported (for listen, outputs NDJSON)

  • Command sections

    • Panel Control: arm, disarm, sensor-reset
    • Status & Query: get-areas, get-zones, get-outputs, get-users, get-profiles, check-code
    • Zones: set-zone-bypass, set-zone-restore
    • Outputs: output, set-output
    • Realtime: listen

Development: Formatting with pre-commit

This repository uses Black for code formatting. To avoid formatting failures in CI, install and enable pre‑commit hooks:

pip install -e ".[dev]"           # installs black and pre-commit
pre-commit install                 # installs the git hook
pre-commit run -a                  # optional: format all files once

Black reads configuration from pyproject.toml (line-length = 100, target-version = py310).

Quick Start

Async API (Recommended)

import asyncio
from pydmp import DMPPanel

async def main():
    panel = DMPPanel()
    await panel.connect("192.168.1.100", "00001", "YOUR_KEY")

    # Arm/disarm area
    areas = await panel.get_areas()
    await areas[0].arm(bypass_faulted=True)  # Optional flags; instant can be set too
    await areas[0].disarm()

    # Check status (raw codes: A/D/S)
    state = await areas[0].get_state()
    if state == 'A':
        print("Armed (Away)")

    # Check zones (raw codes: N/O/S/X/L/M)
    zones = await panel.get_zones()
    for zone in zones:
        if zone.is_open:
            print(f"Open zone: {zone.number} - {zone.name}")

    await panel.disconnect()

asyncio.run(main())

Sync API (Simple Scripts)

from pydmp import DMPPanelSync

panel = DMPPanelSync()
panel.connect("192.168.1.100", "00001", "YOUR_KEY")

areas = panel.get_areas()
areas[0].arm_sync()

state = areas[0].get_state_sync()
if state == 'A':
    print("Armed (Away)")

panel.disconnect()

API Documentation

Panel Control

# Connect to panel (side-effect free)
await panel.connect(host, account, remote_key)

# Get entities
areas = await panel.get_areas()  # List[Area]
zones = await panel.get_zones()  # List[Zone]
outputs = await panel.get_outputs()  # List[Output]

# Update status (explicit)
await panel.update_status()

# Disconnect
await panel.disconnect()

Area Control

area = await panel.get_area(1)

# Arming (no user code required)
await area.arm()
await area.arm(bypass_faulted=True)  # Bypass faulted zones
await area.arm(force_arm=True)  # Force arm bad zones
await area.disarm()  # No user code sent to panel

# Status
state = area.state  # AreaState enum
is_armed = area.is_armed
is_disarmed = area.is_disarmed

Zone Control

zone = await panel.get_zone(1)

# Zone operations
await zone.bypass()
await zone.restore()

# Status
state = zone.state  # ZoneState enum
is_open = zone.is_open
is_bypassed = zone.is_bypassed
has_fault = zone.has_fault

Output Control

output = await panel.get_output(1)

# Output operations
await output.turn_on()
await output.turn_off()
await output.pulse()
await output.toggle()

# Status
state = output.state  # OutputState enum
is_on = output.is_on

Breaking Changes

Recent cleanup removed temporary compatibility aliases and shims. Update your code as follows:

  • Replace DMPConnection with DMPTransport.
  • Replace DMPConnectionSync with DMPTransportSync.
  • Use DMPCommandNAKError (the DMPCommandNAK alias was removed).
  • DMPPanel no longer falls back to a connection object that implements send_command. Tests or callers that injected a stub connection should either:
    • Patch panel._send_command directly to your async stub, or
    • Provide a proper DMPTransport + DMPProtocol if exercising the full path.

Examples (tests):

panel = DMPPanel()
panel._connection = FakeConnection()
panel._send_command = panel._connection.send_command  # route through fake

CLI Usage

Configuration

Create a config.yaml file:

panel:
  host: 192.168.1.100
  account: "00001"
  remote_key: "YOUR_KEY"

JSON output

  • Most commands support --json to emit machine-readable JSON. The default output is a human-friendly table/message format. The listen command streams newline-delimited JSON (NDJSON) when --json is provided.

Commands

# Get areas and zones
pydmp get-areas
pydmp get-zones

# Arm area(s)
pydmp arm "1,2"

# Disarm area (no user code needed)
pydmp disarm 1

# Zone control
pydmp set-zone-bypass 5
pydmp set-zone-restore 5

# Output control
pydmp output 1 on
pydmp output 2 off
pydmp output 3 pulse
pydmp output 4 toggle

# JSON output examples
pydmp get-areas --json
pydmp get-users --json
pydmp get-profiles --json
pydmp listen --json --duration 10 | jq

DMP Protocol Details

Connection

  • Protocol: TCP/IP
  • Port: 2011 (default)
  • Format: @[ACCOUNT][COMMAND]\r
  • Account: 5 digits, left-padded (e.g., 00001)
  • Rate Limit: 0.3s minimum between commands

Command Format Notes

  • [AA]: 2-digit area number (01-08)
  • [ZZZ]: 3-digit zone number (001-999)
  • [NNN]: 3-digit output number (001-999)
  • [B]: Bypass faulted zones (Y/N)
  • [F]: Force arm (Y/N)
  • [M]: Output mode (O=Off, P=Pulse, S=Steady, M=Momentary)

Core Commands

Command Description Format
!V2[KEY] Authenticate @[ACCT]!V2[KEY]\r
!V0 Drop connection @[ACCT]!V0\r
!S Get status @[ACCT]!S\r
?WB**Y001 Get zone/area status @[ACCT]?WB**Y001\r
!O[AA] Disarm area @[ACCT]!O01\r
!C[AA],[B][F] Arm area @[ACCT]!C01,NN\r
!X[ZZZ] Bypass zone @[ACCT]!X005\r
!Y[ZZZ] Restore zone @[ACCT]!Y005\r
!Q[NNN][M] Set output @[ACCT]!Q001P\r

Architecture

pydmp/
├── transport.py         # Async TCP transport (raw bytes I/O)
├── transport_sync.py    # Sync wrapper (transport + protocol)
├── protocol.py          # DMP protocol encoder/decoder
├── crypto.py            # LFSR encryption
├── panel.py             # Async panel controller
├── panel_sync.py        # Sync panel controller
├── status_server.py     # Serial 3 (S3) realtime listener
├── status_parser.py     # Parse S3 Z-frames to typed events
├── user.py              # User code model
├── profile.py           # User profile model
├── area.py              # Area abstraction
├── zone.py              # Zone abstraction
├── output.py            # Output abstraction
├── const/               # Constants (states, types, commands)
├── exceptions.py        # Exception hierarchy
└── cli.py               # CLI tool

Error Handling

PyDMP provides a comprehensive exception hierarchy:

from pydmp.exceptions import (
    DMPError,                # Base exception
    DMPConnectionError,      # Connection issues
    DMPAuthenticationError,  # Auth failed
    DMPTimeoutError,         # Operation timeout
    DMPProtocolError,        # Protocol errors
    DMPCommandNAKError,      # Command rejected
    DMPAreaError,            # Area-specific errors
    DMPZoneError,            # Zone-specific errors
    DMPOutputError,          # Output-specific errors
)

Security Considerations

  • Never log credentials or keys
  • Validate all inputs (account: 5 digits, zone: 1-999, code: 4-6 digits)
  • Don't expose sensitive info in errors
  • Support TLS if panel allows
  • Rate limit commands (0.3s minimum)

Development

# Clone repository
git clone https://github.com/amattas/pydmp.git
cd pydmp

# Install dev dependencies
pip install -e ".[dev]"

# Run tests
pytest

# Run tests with coverage
pytest --cov=pydmp --cov-report=html

# Format code
black src/ tests/

# Type checking
mypy src/

# Linting
ruff check src/ tests/

Documentation

Online docs (MkDocs + mkdocstrings) include concepts, realtime status (S3), encryption details, and full API reference. Hosted: https://amattas.github.io/pydmp/

  • Build locally:
pip install -e ".[docs]"
mkdocs serve
  • CI deploys docs to GitHub Pages on push to main.

Testing

PyDMP includes comprehensive unit tests for core functionality:

# Run all tests
pytest

# Run specific test file
pytest tests/test_protocol.py

# Run with coverage
pytest --cov=pydmp --cov-report=term-missing

Contributing

Contributions are welcome! Please:

  1. Fork the repository
  2. Create a feature branch
  3. Write tests for new functionality
  4. Ensure all tests pass
  5. Submit a pull request

License

Apache License 2.0 - see LICENSE file for details.

Future Enhancements

Emergency Triggers

Emergency events (Panic, Fire, Police, Medical) are not yet implemented. In the reference implementation, these are triggered by pulsing configurable output relays rather than sending dedicated panel commands. For example:

  • Configure which output number corresponds to each emergency type
  • Trigger emergency by pulsing that output: !Q[output]P

This functionality may be added in a future version.

Disclaimer

This is an independent project and is not affiliated with, endorsed by, or associated with Digital Monitoring Products (DMP).

Support

About

Python library for controlling DMP (Digital Monitoring Products) alarm systems via TCP/IP

amattas.github.io/pydmp/

Topics

python home-automation security asyncio home-assistant dmp alarm-system

Resources

Readme

License

Apache-2.0 license
Activity

Stars

3 stars

Watchers

2 watching

Forks

1 fork
Report repository

Releases 5

1.0.1 Latest
Jun 11, 2026
+ 4 releases

Sponsor this project

  •  
Learn more about GitHub Sponsors

Packages

 
 
 

Contributors

Languages