AirMic

Turn your phone into a wireless microphone that types speech directly into your desktop. Your phone handles speech recognition, and the text is typed into whatever window is focused — no drivers, no Bluetooth, no pairing headaches.

Phone (browser) → WebSocket → Desktop (types into focused window)

How it works

1. Run npx airmic or airmic — a setup wizard runs on first launch
2. A TUI appears with a QR code
3. Scan the QR code with your phone's camera
4. Approve the device via 6-digit PIN
5. Tap the mic button and start talking
6. Text appears in your focused desktop window in real-time

Works over your local WiFi network, or over the internet via a relay server.

Install

# Run directly (no install)
npx airmic

# Or install globally
npm install -g airmic
airmic

On first run, a setup wizard asks for connection mode (local/relay/both), port, network interface, and optional AI config. Run airmic setup anytime to reconfigure.

Platform support

Component	Linux (X11)	Linux (Wayland/TTY)	macOS	Windows
Desktop typing	✅ xdotool	✅ ydotool	✅ osascript	✅ PowerShell
Clipboard mode	✅ xclip	✅ wl-copy	✅ pbcopy	✅ Set-Clipboard
Phone UI (browser)	✅	✅	✅	✅
Relay server	✅	✅	✅	✅

The input backend is auto-detected at startup. AirMic picks the best available tool for your platform and display server.

Requirements

Linux (X11): sudo apt install xdotool xclip Linux (Wayland/TTY): sudo apt install ydotool + sudo ydotoold & macOS: Works out of the box (osascript + pbcopy) Windows: Works out of the box (PowerShell + SendKeys)

Node.js 18+ required on all platforms.

Headless mode (daemon)

Run as a background daemon — useful for servers, SSH sessions, or headless machines:

airmic headless on relay    # Start daemon in relay mode
airmic headless on local    # Start daemon in local-only mode
airmic headless on          # Start daemon (uses config)
airmic headless off         # Stop daemon
airmic status               # Show status, URLs, pending PINs
airmic approve <PIN>        # Approve a new device by PIN

The daemon prints a QR code and relay URL on startup, then detaches. Approve devices from another terminal with airmic approve.

Phone UI

The phone gets a clean, mobile-optimized web app with:

• Large mic button — tap to start/stop, or use push-to-talk (Hold) mode
• Live transcript display with interim results
• Pause, Clipboard, AI, and Hold toggle buttons
• Language selector (13 languages)
• History of sent phrases with resend

No app install needed — it's just a web page served over HTTPS.

Connection modes

Local network (same WiFi)

The default. Your phone connects directly to your desktop over your local network. Lowest latency, no internet required.

Relay server (internet)

For when your phone isn't on the same network as your desktop (mobile data, different WiFi, etc.). A relay server on a VPS brokers the WebSocket connection.

AirMic Cloud is included as a default relay. To use it, press Ctrl+K → Relay Servers → select AirMic Cloud.

The phone will automatically try a direct local connection first and fall back to the relay if your desktop isn't reachable locally.

Voice commands

Say these phrases and they'll be executed instead of typed:

Command	Action
"scratch that"	Delete the last phrase
"undo" / "undo that"	Ctrl+Z
"redo" / "redo that"	Ctrl+Y
"new line" / "enter"	Enter key
"new paragraph"	Double Enter
"tab"	Tab key
"select all"	Ctrl+A
"copy" / "cut" / "paste"	Ctrl+C / Ctrl+X / Ctrl+V
"delete" / "backspace"	Delete / BackSpace key
"go up/down/left/right"	Arrow keys
"go home" / "go end"	Home / End keys
"period" / "comma" / "question mark"	Punctuation
"open bracket" / "close bracket"	( )
"open quote" / "close quote"	" "
"dash" / "colon" / "semicolon"	Punctuation
"hashtag" / "at sign" / "dollar sign"	Symbols

Plus many more — see src/connection/voice-commands.js for the full list.

Custom voice commands

Add your own in config.json:

{
  "voiceCommandsExtra": {
    "sign off": { "action": "type", "text": "Best regards,\nJohn" },
    "save file": { "action": "key", "key": "ctrl+s" }
  }
}

Actions: type (insert text), key (press key combo), scratch (delete last phrase).

TUI keyboard shortcuts

Key	Action
Ctrl+K	Command palette (access all actions)
Ctrl+P	Pause / resume
Ctrl+E	Relay server manager
Ctrl+A	AI settings
Ctrl+R	Add word replacement
Ctrl+D	Delete word replacement
Ctrl+L	Clear log
Ctrl+Q	Quit

AI summarize

Spoken text is typed immediately, then silently replaced with an AI-cleaned version in the background. Useful for turning rambling speech into clean prose.

Supports OpenAI, Anthropic, and Google AI.

Setup

Run airmic setup and enable AI when prompted, or configure interactively with Ctrl+A in the TUI.

API keys are stored in ~/.airmic/.env:

AIRMIC_AI_KEY=sk-your-key-here

Toggle AI on/off from the TUI (Ctrl+A) or from the phone's AI button.

Provider	Default model
OpenAI	gpt-4o-mini
Anthropic	claude-3-7-haiku-latest
Google	gemini-2.5-flash

You can override the model and system prompt in AI settings.

Word replacements

Auto-replace words or phrases as they're typed. Useful for fixing consistent misrecognitions or expanding abbreviations.

• Ctrl+R to add a replacement (e.g., "gonna" → "going to")
• Ctrl+D to remove one

Replacements are saved to config and apply to all future transcriptions.

Config

Config is stored in ~/.airmic/config.json (auto-generated on first run or via airmic setup).

Key	Default	Description
port	4000	Local HTTPS port
bindAddress	""	Bind to specific IP (blank = auto-detect)
language	en-US	Speech recognition language (BCP 47)
clipboardMode	false	Paste via clipboard instead of keystroke injection
wordReplacements	{}	Auto-replace map (e.g., {"gonna": "going to"})
voiceCommandsExtra	{}	Custom voice commands
relayUrl	""	Active relay server URL
relaySecret	""	Must match RELAY_SECRET on the relay
relayServers	[...]	Saved relay server list
aiEnabled	false	Enable AI text cleanup
aiProvider	openai	openai, anthropic, or google
aiModel	""	Blank = provider default
aiPrompt	(built-in)	System prompt for AI rewriting

API keys are stored in ~/.airmic/.env. See .env.example.

Self-hosting a relay server

1. Provision a VPS

Any VPS with Node.js 18+ works. AWS Lightsail $3.50/month (512MB) is plenty. Open port 4001 in the firewall.

2. Deploy

# On your VPS (as root)
git clone https://github.com/code-pumpkin/airmic.git /tmp/wmic
cd /tmp/wmic/relay
bash deploy.sh

deploy.sh installs Node, copies files to /opt/wireless-mic-relay, generates a self-signed cert, and starts a systemd service.

3. Set a relay secret (recommended)

Edit /etc/systemd/system/wireless-mic-relay.service:

Environment=RELAY_SECRET=your-strong-secret-here

systemctl daemon-reload && systemctl restart wireless-mic-relay

4. Use a real TLS cert (recommended)

apt install certbot
certbot certonly --standalone -d yourdomain.com

In the service file:

Environment=CERT_DIR=/etc/letsencrypt/live/yourdomain.com

5. Connect your desktop

Press Ctrl+K → Relay Servers → Add custom server. Enter your relay URL (wss://yourdomain.com:4001) and secret.

Security

• All connections are TLS-encrypted (HTTPS + WSS)
• Phone access requires a random URL token (shared via QR code)
• New devices must be approved via 6-digit PIN confirmation on the desktop
• Returning devices are remembered via cryptographic device tokens
• Per-socket message rate limiting (30 msg/sec)
• Connection rate limiting with bot detection (IPs that never register get blocked)
• Security headers: HSTS, CSP, X-Frame-Options, nosniff, Referrer-Policy
• Control characters stripped before typing
• API keys stored in ~/.airmic/.env, not in config
• Sessions auto-expire after 90 days

Troubleshooting

Phone can't connect / cert error Accept the self-signed certificate warning in your phone's browser. On some phones you need to visit the HTTPS URL directly first, accept the warning, then reload.

"Speech recognition not supported" Use Chrome or Safari. Firefox doesn't support the Web Speech API.

Text not appearing on desktop (Linux X11) Make sure xdotool is installed and you're running X11. Check that the target window is focused.

Text not appearing on desktop (Linux TTY/Wayland) Install ydotool and start the daemon: sudo ydotoold &. AirMic auto-detects it.

Text not appearing on desktop (macOS/Windows) Should work out of the box. If not, set clipboardMode: true in config.

Android "pyramid" effect (repeated text) This is handled automatically — AirMic uses single-shot recognition mode on Android with auto-restart.

Relay connection fails Check that port 4001 is open on the VPS, the relay secret matches, and the service is running (systemctl status wireless-mic-relay).

"No input backend found" Install xdotool (X11), ydotool (Wayland/TTY), or run on macOS/Windows.

License

MIT