Autoselect MFD_SYSCON when building an SMP kernel by asheplyakov · Pull Request #1 · elvees/linux

asheplyakov · 2020-08-13T06:03:58Z

Without MFD_SYSCON the kernel fails to bring up the secondary CPU(s) like this:

[    0.070000] CPU: Testing write buffer coherency: ok
[    0.070000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.080000] mcom02_map_device: could not find elvees,mcom-pmctr node
[    0.080000] Setting up static identity map for 0x400082c0 - 0x400082f4
[    0.090000] mcom02_boot_secondary: SMCTR is not mapped
[    0.100000] CPU1: failed to boot: -6
[    0.100000] Brought up 1 CPUs

Therefore select MFD_SYSCON automatically so the kernel "just works".

MFD_SYSCON is necessary to bring up the secondary CPU(s). Therefore select it automatically so the user won't need figure out why the kernel was unable to boot the secondary CPU(s).

[ Upstream commit e773ca7 ] Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 9492034) Issue: #MCOM02SW-1888 Change-Id: Ie95a7230207665d8bd086b56ee125b513150bf3b

[ Upstream commit cc4efd3 ] Syzbot generated a crafted image [1] with a non-compact HEAD index of clusterofs 33024 while valid numbers should be 0 ~ lclustersize-1, which causes the following unexpected behavior as below: BUG: unable to handle page fault for address: fffff52101a3fff9 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 23ffed067 P4D 23ffed067 PUD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 4398 Comm: kworker/u5:1 Not tainted 6.3.0-rc6-syzkaller-g09a9639e56c0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Workqueue: erofs_worker z_erofs_decompressqueue_work RIP: 0010:z_erofs_decompress_queue+0xb7e/0x2b40 ... Call Trace: <TASK> z_erofs_decompressqueue_work+0x99/0xe0 process_one_work+0x8f6/0x1170 worker_thread+0xa63/0x1210 kthread+0x270/0x300 ret_from_fork+0x1f/0x30 Note that normal images or images using compact indexes are not impacted. Let's fix this now. [1] https://lore.kernel.org/r/000000000000ec75b005ee97fbaa@google.com Reported-and-tested-by: syzbot+aafb3f37cfeb6534c4ac@syzkaller.appspotmail.com Fixes: 02827e1 ("staging: erofs: add erofs_map_blocks_iter") Fixes: 152a333 ("staging: erofs: add compacted compression indexes support") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230410173714.104604-1-hsiangkao@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cba6cfd ] An automated bot told me that there was a potential lockdep problem with regulators. This was on the chromeos-5.15 kernel, but I see nothing that would be different downstream compared to upstream. The bot said: ============================================ WARNING: possible recursive locking detected 5.15.104-lockdep-17461-gc1e499ed6604 #1 Not tainted -------------------------------------------- kworker/u16:4/115 is trying to acquire lock: ffffff8083110170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: create_regulator+0x398/0x7ec but task is already holding lock: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(regulator_ww_class_mutex); lock(regulator_ww_class_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u16:4/115: #0: ffffff808006a948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x520/0x1348 #1: ffffffc00e0a7cc0 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x55c/0x1348 #2: ffffff80828a2260 (&dev->mutex){....}-{3:3}, at: __device_attach_async_helper+0xd0/0x2a4 #3: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8 stack backtrace: CPU: 2 PID: 115 Comm: kworker/u16:4 Not tainted 5.15.104-lockdep-17461-gc1e499ed6604 #1 9292e52fa83c0e23762b2b3aa1bacf5787a4d5da Hardware name: Google Quackingstick (rev0+) (DT) Workqueue: events_unbound async_run_entry_fn Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c dump_stack+0x1c/0x48 __lock_acquire+0x16d4/0x6c74 lock_acquire+0x208/0x750 __mutex_lock_common+0x11c/0x11f8 ww_mutex_lock+0xc0/0x440 create_regulator+0x398/0x7ec regulator_resolve_supply+0x654/0x7c4 regulator_register_resolve_supply+0x30/0x120 class_for_each_device+0x1b8/0x230 regulator_register+0x17a4/0x1f40 devm_regulator_register+0x60/0xd0 reg_fixed_voltage_probe+0x728/0xaec platform_probe+0x150/0x1c8 really_probe+0x274/0xa20 __driver_probe_device+0x1dc/0x3f4 driver_probe_device+0x78/0x1c0 __device_attach_driver+0x1ac/0x2c8 bus_for_each_drv+0x11c/0x190 __device_attach_async_helper+0x1e4/0x2a4 async_run_entry_fn+0xa0/0x3ac process_one_work+0x638/0x1348 worker_thread+0x4a8/0x9c4 kthread+0x2e4/0x3a0 ret_from_fork+0x10/0x20 The problem was first reported soon after we made many of the regulators probe asynchronously, though nothing I've seen implies that the problems couldn't have also happened even without that. I haven't personally been able to reproduce the lockdep issue, but the issue does look somewhat legitimate. Specifically, it looks like in regulator_resolve_supply() we are holding a "rdev" lock while calling set_supply() -> create_regulator() which grabs the lock of a _different_ "rdev" (the one for our supply). This is not necessarily safe from a lockdep perspective since there is no documented ordering between these two locks. In reality, we should always be locking a regulator before the supplying regulator, so I don't expect there to be any real deadlocks in practice. However, the regulator framework in general doesn't express this to lockdep. Let's fix the issue by simply grabbing the two locks involved in the same way we grab multiple locks elsewhere in the regulator framework: using the "wound/wait" mechanisms. Fixes: eaa7995 ("regulator: core: avoid regulator_resolve_supply() race condition") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230329143317.RFC.v2.2.I30d8e1ca10cfbe5403884cdd192253a2e063eb9e@changeid Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ae13381 ] During fuzzing, a general protection fault is observed in vmci_host_poll(). general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926 <- omitting registers -> Call Trace: <TASK> lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162 add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22 poll_wait include/linux/poll.h:49 [inline] vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174 vfs_poll include/linux/poll.h:88 [inline] do_pollfd fs/select.c:873 [inline] do_poll fs/select.c:921 [inline] do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015 __do_sys_ppoll fs/select.c:1121 [inline] __se_sys_ppoll+0x2cc/0x330 fs/select.c:1101 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Example thread interleaving that causes the general protection fault is as follows: CPU1 (vmci_host_poll) CPU2 (vmci_host_do_init_context) ----- ----- // Read uninitialized context context = vmci_host_dev->context; // Initialize context vmci_host_dev->context = vmci_ctx_create(); vmci_host_dev->ct_type = VMCIOBJ_CONTEXT; if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { // Dereferencing the wrong pointer poll_wait(..., &context->host_context); } In this scenario, vmci_host_poll() reads vmci_host_dev->context first, and then reads vmci_host_dev->ct_type to check that vmci_host_dev->context is initialized. However, since these two reads are not atomically executed, there is a chance of a race condition as described above. To fix this race condition, read vmci_host_dev->context after checking the value of vmci_host_dev->ct_type so that vmci_host_poll() always reads an initialized context. Reported-by: Dae R. Jeong <threeearcat@gmail.com> Fixes: 8bf5039 ("VMCI: host side driver implementation.") Signed-off-by: Dae R. Jeong <threeearcat@gmail.com> Link: https://lore.kernel.org/r/ZCGFsdBAU4cYww5l@dragonet Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eca5cd9 ] When unregistering MAD agent, srpt module has a non-null check for 'mad_agent' pointer before invoking ib_unregister_mad_agent(). This check can pass if 'mad_agent' variable holds an error value. The 'mad_agent' can have an error value for a short window when srpt_add_one() and srpt_remove_one() is executed simultaneously. In srpt module, added a valid pointer check for 'sport->mad_agent' before unregistering MAD agent. This issue can hit when RoCE driver unregisters ib_device Stack Trace: ------------ BUG: kernel NULL pointer dereference, address: 000000000000004d PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020 Workqueue: bnxt_re bnxt_re_task [bnxt_re] RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40 Call Trace: ib_unregister_mad_agent+0x46/0x2f0 [ib_core] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready ? __schedule+0x20b/0x560 srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt] srpt_remove_one+0x20/0x150 [ib_srpt] remove_client_context+0x88/0xd0 [ib_core] bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex disable_device+0x8a/0x160 [ib_core] bond0: active interface up! ? kernfs_name_hash+0x12/0x80 (NULL device *): Bonding Info Received: rdev: 000000006c0b8247 __ib_unregister_device+0x42/0xb0 [ib_core] (NULL device *): Master: mode: 4 num_slaves:2 ib_unregister_device+0x22/0x30 [ib_core] (NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0 bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re] bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re] Fixes: a42d985 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Link: https://lore.kernel.org/r/20230406042549.507328-1-saravanan.vajravel@broadcom.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 45121ad ] The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by the psp module so clear the interrupt status register early in the handler to prevent missed interrupts. sev_irq_handler() calls wake_up() on a wait queue, which can result in a new command being submitted from a different CPU. This then races with the clearing of isr and can result in missed interrupts. A missed interrupt results in a command waiting until it times out, which results in the psp being declared dead. This is unlikely on bare metal, but has been observed when running virtualized. In the cases where this is observed, sev->cmdresp_reg has PSP_CMDRESP_RESP set which indicates that the command was processed correctly but no interrupt was asserted. The full sequence of events looks like this: CPU 1: submits SEV cmd #1 CPU 1: calls wait_event_timeout() CPU 0: enters psp_irq_handler() CPU 0: calls sev_handler()->wake_up() CPU 1: wakes up; finishes processing cmd #1 CPU 1: submits SEV cmd #2 CPU 1: calls wait_event_timeout() PSP: finishes processing cmd #2; interrupt status is still set; no interrupt CPU 0: clears intsts CPU 0: exits psp_irq_handler() CPU 1: wait_event_timeout() times out; psp_dead=true Fixes: 200664d ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support") Cc: stable@vger.kernel.org Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6a34172 ] syzkaller reported a warning below [0]. We can reproduce it by sending 0-byte data from the (AF_PACKET, SOCK_PACKET) socket via some devices whose dev->hard_header_len is 0. struct sockaddr_pkt addr = { .spkt_family = AF_PACKET, .spkt_device = "tun0", }; int fd; fd = socket(AF_PACKET, SOCK_PACKET, 0); sendto(fd, NULL, 0, 0, (struct sockaddr *)&addr, sizeof(addr)); We have a similar fix for the (AF_PACKET, SOCK_RAW) socket as commit dc63370 ("net/af_packet: check len when min_header_len equals to 0"). Let's add the same test for the SOCK_PACKET socket. [0]: skb_assert_len WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 skb_assert_len include/linux/skbuff.h:2552 [inline] WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 __dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159 Modules linked in: CPU: 1 PID: 19945 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_assert_len include/linux/skbuff.h:2552 [inline] RIP: 0010:__dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159 Code: 89 de e8 1d a2 85 fd 84 db 75 21 e8 64 a9 85 fd 48 c7 c6 80 2a 1f 86 48 c7 c7 c0 06 1f 86 c6 05 23 cf 27 04 01 e8 fa ee 56 fd <0f> 0b e8 43 a9 85 fd 0f b6 1d 0f cf 27 04 31 ff 89 de e8 e3 a1 85 RSP: 0018:ffff8880217af6e0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90001133000 RDX: 0000000000040000 RSI: ffffffff81186922 RDI: 0000000000000001 RBP: ffff8880217af8b0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888030045640 R13: ffff8880300456b0 R14: ffff888030045650 R15: ffff888030045718 FS: 00007fc5864da640(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020005740 CR3: 000000003f856003 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> dev_queue_xmit include/linux/netdevice.h:3085 [inline] packet_sendmsg_spkt+0xc4b/0x1230 net/packet/af_packet.c:2066 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x1b4/0x200 net/socket.c:747 ____sys_sendmsg+0x331/0x970 net/socket.c:2503 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2557 __sys_sendmmsg+0x18c/0x430 net/socket.c:2643 __do_sys_sendmmsg net/socket.c:2672 [inline] __se_sys_sendmmsg net/socket.c:2669 [inline] __x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc58791de5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fc5864d9cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007fc58791de5d RDX: 0000000000000001 RSI: 0000000020005740 RDI: 0000000000000004 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fc58797e530 R15: 0000000000000000 </TASK> ---[ end trace 0000000000000000 ]--- skb len=0 headroom=16 headlen=0 tailroom=304 mac=(16,0) net=(16,-1) trans=-1 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0 dev name=sit0 feat=0x00000006401d7869 sk family=17 type=10 proto=0 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4063384 ] Before blamed commit, pskb_may_pull() was used instead of skb_header_pointer() in __vlan_get_protocol() and friends. Few callers depended on skb->head being populated with MAC header, syzbot caught one of them (skb_mac_gso_segment()) Add vlan_get_protocol_and_depth() to make the intent clearer and use it where sensible. This is a more generic fix than commit e9d3f80 ("net/af_packet: make sure to pull mac header") which was dealing with a similar issue. kernel BUG at include/linux/skbuff.h:2655 ! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 1441 Comm: syz-executor199 Not tainted 6.1.24-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:__skb_pull include/linux/skbuff.h:2655 [inline] RIP: 0010:skb_mac_gso_segment+0x68f/0x6a0 net/core/gro.c:136 Code: fd 48 8b 5c 24 10 44 89 6b 70 48 c7 c7 c0 ae 0d 86 44 89 e6 e8 a1 91 d0 00 48 c7 c7 00 af 0d 86 48 89 de 31 d2 e8 d1 4a e9 ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RSP: 0018:ffffc90001bd7520 EFLAGS: 00010286 RAX: ffffffff8469736a RBX: ffff88810f31dac0 RCX: ffff888115a18b00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90001bd75e8 R08: ffffffff84697183 R09: fffff5200037adf9 R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000012 R13: 000000000000fee5 R14: 0000000000005865 R15: 000000000000fed7 FS: 000055555633f300(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 0000000116fea000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> [<ffffffff847018dd>] __skb_gso_segment+0x32d/0x4c0 net/core/dev.c:3419 [<ffffffff8470398a>] skb_gso_segment include/linux/netdevice.h:4819 [inline] [<ffffffff8470398a>] validate_xmit_skb+0x3aa/0xee0 net/core/dev.c:3725 [<ffffffff84707042>] __dev_queue_xmit+0x1332/0x3300 net/core/dev.c:4313 [<ffffffff851a9ec7>] dev_queue_xmit+0x17/0x20 include/linux/netdevice.h:3029 [<ffffffff851b4a82>] packet_snd net/packet/af_packet.c:3111 [inline] [<ffffffff851b4a82>] packet_sendmsg+0x49d2/0x6470 net/packet/af_packet.c:3142 [<ffffffff84669a12>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff84669a12>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff84669a12>] __sys_sendto+0x472/0x5f0 net/socket.c:2139 [<ffffffff84669c75>] __do_sys_sendto net/socket.c:2151 [inline] [<ffffffff84669c75>] __se_sys_sendto net/socket.c:2147 [inline] [<ffffffff84669c75>] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147 [<ffffffff8551d40f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff8551d40f>] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 [<ffffffff85600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 469aced ("vlan: consolidate VLAN parsing code and limit max parsing depth") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 90cbed5 ] If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf3 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40@huawei.com> Suggested-by: Florian Westphal <fw@strlen.de> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d2c48b2 ] Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/ Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20230216084920.144064-1-pierre.gondois@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 04e8279 ] When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c83b493 ] As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. Fixes: c411ed8 ("nsh: add GSO support") Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 56077b5 ] When doing link mtu negotiation, a malicious peer may send Activate msg with a very small mtu, e.g. 4 in Shuang's testing, without checking for the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then n->links[bearer_id].mtu is set to 4294967228, which is a overflow of '4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss(). With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning: tipc: Too large msg, purging xmit list 1 5 0 40 4! tipc: Too large msg, purging xmit list 1 15 0 60 4! And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in named_distribute(), and when purging it in tipc_link_xmit(), a crash was even caused: general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19 RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0 Call Trace: <IRQ> skb_release_data+0xf9/0x1d0 kfree_skb_reason+0x40/0x100 tipc_link_xmit+0x57a/0x740 [tipc] tipc_node_xmit+0x16c/0x5c0 [tipc] tipc_named_node_up+0x27f/0x2c0 [tipc] tipc_node_write_unlock+0x149/0x170 [tipc] tipc_rcv+0x608/0x740 [tipc] tipc_udp_recv+0xdc/0x1f0 [tipc] udp_queue_rcv_one_skb+0x33e/0x620 udp_unicast_rcv_skb.isra.72+0x75/0x90 __udp4_lib_rcv+0x56d/0xc20 ip_protocol_deliver_rcu+0x100/0x2d0 This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(), and not updating mtu if it is too small. Fixes: ed193ec ("tipc: simplify link mtu negotiation") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 61ae320 ] There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem(): general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] nft_add_set_elem+0x14b0/0x2990 nf_tables_newsetelem+0x528/0xb30 Furthermore, there is a possible use-after-free while iterating, 'node' can be free'd so we need to cache the next value to use. Fixes: c9e6978 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 7e01c7f upstream. Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 597441b upstream. Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad42a35 upstream. syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe1 ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbad ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4faeee0 ] Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs. A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue. tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used. Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener. When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1] This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect(). If this counter is not zero, tcp_disconnect() returns an error. This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones. Note that we probably could revert commit 499350a ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket) [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740 Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48 RSP: 0018:ffffc900033af660 EFLAGS: 00010206 RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001 RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8 R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344 FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616 tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681 inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 ____sys_recvmsg+0x210/0x5a0 net/socket.c:2720 ___sys_recvmsg+0xf2/0x180 net/socket.c:2762 do_recvmmsg+0x25e/0x6e0 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5c0108c0f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003 RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 36eec02 ] When use the following command to test: 1)ip link add bond0 type bond 2)ip link set bond0 up 3)tc qdisc add dev bond0 root handle ffff: mq 4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq The kernel reports NULL pointer dereference issue. The stack information is as follows: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mq_attach+0x44/0xa0 lr : qdisc_graft+0x20c/0x5cc sp : ffff80000e2236a0 x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0 x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1 x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000 x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000 x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000 x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000 Call trace: mq_attach+0x44/0xa0 qdisc_graft+0x20c/0x5cc tc_modify_qdisc+0x1c4/0x664 rtnetlink_rcv_msg+0x354/0x440 netlink_rcv_skb+0x64/0x144 rtnetlink_rcv+0x28/0x34 netlink_unicast+0x1e8/0x2a4 netlink_sendmsg+0x308/0x4a0 sock_sendmsg+0x64/0xac ____sys_sendmsg+0x29c/0x358 ___sys_sendmsg+0x90/0xd0 __sys_sendmsg+0x7c/0xd0 __arm64_sys_sendmsg+0x2c/0x38 invoke_syscall+0x54/0x114 el0_svc_common.constprop.1+0x90/0x174 do_el0_svc+0x3c/0xb0 el0_svc+0x24/0xec el0t_64_sync_handler+0x90/0xb4 el0t_64_sync+0x174/0x178 This is because when mq is added for the first time, qdiscs in mq is set to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we need to initialize qdiscs in the mq before continuing to graft. Otherwise, it will couse NULL pointer dereference issue in mq_attach(). And the same issue will occur in the attach functions of mqprio, taprio and htb. ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and the command should be dropped. Fixes: 6ec1c69 ("net_sched: add classful multiqueue dummy scheduler") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Tested-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a99d21c upstream. We may get an empty response with zero length at the beginning of the driver start and get following UBSAN error. Since there is no content(SDRT_NONE) for the response, just return and skip the response handling to avoid this problem. Test pass : SDIO wifi throughput test with this patch [ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12 [ 126.980709] index -1 is out of range for type 'u32 [4]' [ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1 [ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [ 126.980833] Call Trace: [ 126.980845] <TASK> [ 126.980860] dump_stack_lvl+0x48/0x70 [ 126.980895] dump_stack+0x10/0x20 [ 126.980916] ubsan_epilogue+0x9/0x40 [ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90 [ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300] [ 126.981018] ? _raw_spin_unlock+0x18/0x40 [ 126.981042] ? finish_task_switch+0x175/0x6f0 [ 126.981070] ? __switch_to+0x42e/0xda0 [ 126.981089] ? __switch_to_asm+0x3a/0x80 [ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300] [ 126.981174] ? __kasan_check_read+0x11/0x20 [ 126.981204] process_one_work+0x7ee/0x13d0 [ 126.981246] worker_thread+0x53c/0x1240 [ 126.981291] kthread+0x2b8/0x370 [ 126.981312] ? __pfx_worker_thread+0x10/0x10 [ 126.981336] ? __pfx_kthread+0x10/0x10 [ 126.981359] ret_from_fork+0x29/0x50 [ 126.981400] </TASK> Fixes: 88095e7 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c308e9e ] SMCRv1 has a similar issue to SMCRv2 (see link below) that may access invalid MRs of RMBs when construct LLC ADD LINK CONT messages. BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 5 PID: 48 Comm: kworker/5:0 Kdump: loaded Tainted: G W E 6.4.0-rc3+ #49 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_add_link_cont+0x160/0x270 [smc] RSP: 0018:ffffa737801d3d50 EFLAGS: 00010286 RAX: ffff964f82144000 RBX: ffffa737801d3dd8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff964f81370c30 RBP: ffffa737801d3dd4 R08: ffff964f81370000 R09: ffffa737801d3db0 R10: 0000000000000001 R11: 0000000000000060 R12: ffff964f82e70000 R13: ffff964f81370c38 R14: ffffa737801d3dd3 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9652bfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000008fa20004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_srv_rkey_exchange+0xa7/0x190 [smc] smc_llc_srv_add_link+0x3ae/0x5a0 [smc] smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into LLC messages. For SMCRv1, they are ADD LINK CONT messages. However smc_llc_add_link_cont() may mistakenly access to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes it. Fixes: 87f88cd ("net/smc: rkey processing for a new link as SMC client") Link: https://lore.kernel.org/r/1685101741-74826-3-git-send-email-guwen@linux.alibaba.com Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 24e2278 ] syzkaller found a repro that causes Hung Task [0] with ipset. The repro first creates an ipset and then tries to delete a large number of IPs from the ipset concurrently: IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187 IPSET_ATTR_CIDR : 2 The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET) held, and other threads wait for it to be released. Previously, the same issue existed in set->variant->uadt() that could run so long under ip_set_lock(set). Commit 5e29dc3 ("netfilter: ipset: Rework long task execution when adding/deleting entries") tried to fix it, but the issue still exists in the caller with another mutex. While adding/deleting many IPs, we should release the CPU periodically to prevent someone from abusing ipset to hang the system. Note we need to increment the ipset's refcnt to prevent the ipset from being destroyed while rescheduling. [0]: INFO: task syz-executor174:268 blocked for more than 143 seconds. Not tainted 6.4.0-rc1-00145-gba79e9a73284 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d Call trace: __switch_to+0x308/0x714 arch/arm64/kernel/process.c:556 context_switch kernel/sched/core.c:5343 [inline] __schedule+0xd84/0x1648 kernel/sched/core.c:6669 schedule+0xf0/0x214 kernel/sched/core.c:6745 schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804 __mutex_lock_common kernel/locking/mutex.c:679 [inline] __mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747 __mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035 mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286 nfnl_lock net/netfilter/nfnetlink.c:98 [inline] nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295 netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546 nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365 netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x4b8/0x810 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Reported-by: syzkaller <syzkaller@googlegroups.com> Fixes: a7b4f98 ("netfilter: ipset: IP set core support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a2f4c14 ] A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156. The Source Routing Header (SRH) has the following format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next Header | Hdr Ext Len | Routing Type | Segments Left | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CmprI | CmprE | Pad | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | . . . Addresses[1..n] . . . | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The originator of an SRH places the first hop's IPv6 address in the IPv6 header's IPv6 Destination Address and the second hop's IPv6 address as the first address in Addresses[1..n]. The CmprI and CmprE fields indicate the number of prefix octets that are shared with the IPv6 Destination Address. When CmprI or CmprE is not 0, Addresses[1..n] are compressed as follows: 1..n-1 : (16 - CmprI) bytes n : (16 - CmprE) bytes Segments Left indicates the number of route segments remaining. When the value is not zero, the SRH is forwarded to the next hop. Its address is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6 Destination Address. When Segment Left is greater than or equal to 2, the size of SRH is not changed because Addresses[1..n-1] are decompressed and recompressed with CmprI. OTOH, when Segment Left changes from 1 to 0, the new SRH could have a different size because Addresses[1..n-1] are decompressed with CmprI and recompressed with CmprE. Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has 16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to 16 bytes and not recompressed. Finally, the new SRH will need more room in the header, and the size is (16 - 1) * (n - 1) bytes. Here the max value of n is 255 as Segment Left is u8, so in the worst case, we have to allocate 3825 bytes in the skb headroom. However, now we only allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7 bytes). If the decompressed size overflows the room, skb_push() hits BUG() below [0]. Instead of allocating the fixed buffer for every packet, let's allocate enough headroom only when we receive SRH with Segment Left 1. [0]: skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo kernel BUG at net/core/skbuff.c:200! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_panic (net/core/skbuff.c:200) Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90000003da0 EFLAGS: 00000246 RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540 RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800 R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190 FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> skb_push (net/core/skbuff.c:210) ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5494) process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934) __napi_poll (net/core/dev.c:6496) net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) do_softirq (kernel/softirq.c:472 kernel/softirq.c:459) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:396) __dev_queue_xmit (net/core/dev.c:4272) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:724 net/socket.c:747) __sys_sendto (net/socket.c:2144) __x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f453a138aea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003 RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b </TASK> Modules linked in: Fixes: 8610c7c ("net: ipv6: add support for rpl sr exthdr") Reported-by: Max VA Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f46fab0 ] Anastasios reported crash on stable 5.15 kernel with following BPF attached to lsm hook: SEC("lsm.s/bprm_creds_for_exec") int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm) { struct path *path = &bprm->executable->f_path; char p[128] = { 0 }; bpf_d_path(path, p, 128); return 0; } But bprm->executable can be NULL, so bpf_d_path call will crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... RIP: 0010:d_path+0x22/0x280 ... Call Trace: <TASK> bpf_d_path+0x21/0x60 bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99 bpf_trampoline_6442506293_0+0x55/0x1000 bpf_lsm_bprm_creds_for_exec+0x5/0x10 security_bprm_creds_for_exec+0x29/0x40 bprm_execve+0x1c1/0x900 do_execveat_common.isra.0+0x1af/0x260 __x64_sys_execve+0x32/0x40 It's problem for all stable trees with bpf_d_path helper, which was added in 5.9. This issue is fixed in current bpf code, where we identify and mark trusted pointers, so the above code would fail even to load. For the sake of the stable trees and to workaround potentially broken verifier in the future, adding the code that reads the path object from the passed pointer and verifies it's valid in kernel space. Fixes: 6e22ab9 ("bpf: Add d_path helper") Reported-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com> Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 011a871 ] When using DMA mode we are facing with Oops: [ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c [ 396.469374] Oops [#1] [ 396.471839] Modules linked in: [ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68 [ 396.483619] Hardware name: YMP ELCT FPGA (DT) [ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342 [ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342 [ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0 [ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000 [ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990 [ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8 [ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038 [ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8 [ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5 [ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254 [ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577 [ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8 [ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d [ 396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68 [ 396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502 [ 396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e [ 396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e [ 396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212 [ 396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60 [ 396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a [ 396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218 [ 396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6 [ 396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26 [ 396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96 [ 396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6 [ 396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e [ 396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c [ 396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2 [ 396.674964] ---[ end trace 0000000000000000 ]--- It happens because of play_dma_data/capture_dma_data pointers are NULL. Current implementation assigns these pointers at snd_soc_dai_driver startup() callback and reset them back to NULL at shutdown(). But soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open() before snd_soc_dai_driver startup(). Most generic DMA capable I2S drivers use snd_soc_dai_driver probe() callback to init DMA pointers only once at probe. So move DMA init to dw_i2s_dai_probe and drop shutdown() and startup() callbacks. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 691b048 ] - When a iSER session is released, ib_isert module is taking a mutex lock and releasing all pending connections. As part of this, ib_isert is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending CM events to CMA handler of ib_isert. This handler is taking same mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm modules. - For fix, created local list of pending connections and release the connection outside of mutex lock. Calltrace: --------- [ 1229.791410] INFO: task kworker/10:1:642 blocked for more than 120 seconds. [ 1229.791416] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791419] task:kworker/10:1 state:D stack: 0 pid: 642 ppid: 2 flags:0x80004000 [ 1229.791424] Workqueue: ib_cm cm_work_handler [ib_cm] [ 1229.791436] Call Trace: [ 1229.791438] __schedule+0x2d1/0x830 [ 1229.791445] ? select_idle_sibling+0x23/0x6f0 [ 1229.791449] schedule+0x35/0xa0 [ 1229.791451] schedule_preempt_disabled+0xa/0x10 [ 1229.791453] __mutex_lock.isra.7+0x310/0x420 [ 1229.791456] ? select_task_rq_fair+0x351/0x990 [ 1229.791459] isert_cma_handler+0x224/0x330 [ib_isert] [ 1229.791463] ? ttwu_queue_wakelist+0x159/0x170 [ 1229.791466] cma_cm_event_handler+0x25/0xd0 [rdma_cm] [ 1229.791474] cma_ib_handler+0xa7/0x2e0 [rdma_cm] [ 1229.791478] cm_process_work+0x22/0xf0 [ib_cm] [ 1229.791483] cm_work_handler+0xf4/0xf30 [ib_cm] [ 1229.791487] ? move_linked_works+0x6e/0xa0 [ 1229.791490] process_one_work+0x1a7/0x360 [ 1229.791491] ? create_worker+0x1a0/0x1a0 [ 1229.791493] worker_thread+0x30/0x390 [ 1229.791494] ? create_worker+0x1a0/0x1a0 [ 1229.791495] kthread+0x10a/0x120 [ 1229.791497] ? set_kthread_struct+0x40/0x40 [ 1229.791499] ret_from_fork+0x1f/0x40 [ 1229.791739] INFO: task targetcli:28666 blocked for more than 120 seconds. [ 1229.791740] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791741] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791742] task:targetcli state:D stack: 0 pid:28666 ppid: 5510 flags:0x00004080 [ 1229.791743] Call Trace: [ 1229.791744] __schedule+0x2d1/0x830 [ 1229.791746] schedule+0x35/0xa0 [ 1229.791748] schedule_preempt_disabled+0xa/0x10 [ 1229.791749] __mutex_lock.isra.7+0x310/0x420 [ 1229.791751] rdma_destroy_id+0x15/0x20 [rdma_cm] [ 1229.791755] isert_connect_release+0x115/0x130 [ib_isert] [ 1229.791757] isert_free_np+0x87/0x140 [ib_isert] [ 1229.791761] iscsit_del_np+0x74/0x120 [iscsi_target_mod] [ 1229.791776] lio_target_np_driver_store+0xe9/0x140 [iscsi_target_mod] [ 1229.791784] configfs_write_file+0xb2/0x110 [ 1229.791788] vfs_write+0xa5/0x1a0 [ 1229.791792] ksys_write+0x4f/0xb0 [ 1229.791794] do_syscall_64+0x5b/0x1a0 [ 1229.791798] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: bd37922 ("iser-target: Fix pending connections handling in target stack shutdown sequnce") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Link: https://lore.kernel.org/r/20230606102531.162967-2-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9eed321 ] It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 3c40eb8 upstream. The call to mmc_request_done() can schedule, so it must not be called from irq context. Wake the irq thread if it needs to be called, and let its existing logic do its work. Fixes the following kernel bug, which appears when running an RT patched kernel on the AmLogic Meson AXG A113X SoC: [ 11.111407] BUG: scheduling while atomic: kworker/0:1H/75/0x00010001 [ 11.111438] Modules linked in: [ 11.111451] CPU: 0 PID: 75 Comm: kworker/0:1H Not tainted 6.4.0-rc3-rt2-rtx-00081-gfd07f41ed6b4-dirty #1 [ 11.111461] Hardware name: RTX AXG A113X Linux Platform Board (DT) [ 11.111469] Workqueue: kblockd blk_mq_run_work_fn [ 11.111492] Call trace: [ 11.111497] dump_backtrace+0xac/0xe8 [ 11.111510] show_stack+0x18/0x28 [ 11.111518] dump_stack_lvl+0x48/0x60 [ 11.111530] dump_stack+0x18/0x24 [ 11.111537] __schedule_bug+0x4c/0x68 [ 11.111548] __schedule+0x80/0x574 [ 11.111558] schedule_loop+0x2c/0x50 [ 11.111567] schedule_rtlock+0x14/0x20 [ 11.111576] rtlock_slowlock_locked+0x468/0x730 [ 11.111587] rt_spin_lock+0x40/0x64 [ 11.111596] __wake_up_common_lock+0x5c/0xc4 [ 11.111610] __wake_up+0x18/0x24 [ 11.111620] mmc_blk_mq_req_done+0x68/0x138 [ 11.111633] mmc_request_done+0x104/0x118 [ 11.111644] meson_mmc_request_done+0x38/0x48 [ 11.111654] meson_mmc_irq+0x128/0x1f0 [ 11.111663] __handle_irq_event_percpu+0x70/0x114 [ 11.111674] handle_irq_event_percpu+0x18/0x4c [ 11.111683] handle_irq_event+0x80/0xb8 [ 11.111691] handle_fasteoi_irq+0xa4/0x120 [ 11.111704] handle_irq_desc+0x20/0x38 [ 11.111712] generic_handle_domain_irq+0x1c/0x28 [ 11.111721] gic_handle_irq+0x8c/0xa8 [ 11.111735] call_on_irq_stack+0x24/0x4c [ 11.111746] do_interrupt_handler+0x88/0x94 [ 11.111757] el1_interrupt+0x34/0x64 [ 11.111769] el1h_64_irq_handler+0x18/0x24 [ 11.111779] el1h_64_irq+0x64/0x68 [ 11.111786] __add_wait_queue+0x0/0x4c [ 11.111795] mmc_blk_rw_wait+0x84/0x118 [ 11.111804] mmc_blk_mq_issue_rq+0x5c4/0x654 [ 11.111814] mmc_mq_queue_rq+0x194/0x214 [ 11.111822] blk_mq_dispatch_rq_list+0x3ac/0x528 [ 11.111834] __blk_mq_sched_dispatch_requests+0x340/0x4d0 [ 11.111847] blk_mq_sched_dispatch_requests+0x38/0x70 [ 11.111858] blk_mq_run_work_fn+0x3c/0x70 [ 11.111865] process_one_work+0x17c/0x1f0 [ 11.111876] worker_thread+0x1d4/0x26c [ 11.111885] kthread+0xe4/0xf4 [ 11.111894] ret_from_fork+0x10/0x20 Fixes: 51c5d84 ("MMC: meson: initial support for GX platforms") Cc: stable@vger.kernel.org Signed-off-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/r/20230607082713.517157-1-martin@geanix.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…plate commit 54abe19 upstream. When commit 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") repurposed the writeback_dirty_page trace event as a template to create its new wait_on_page_writeback trace event, it ended up opening a window to NULL pointer dereference crashes due to the (infrequent) occurrence of a race where an access to a page in the swap-cache happens concurrently with the moment this page is being written to disk and the tracepoint is enabled: BUG: kernel NULL pointer dereference, address: 0000000000000040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000010ec0a067 P4D 800000010ec0a067 PUD 102353067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023 RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0 Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d RSP: 0000:ffffaad580b6fb60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff90e38035c01c RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e38035c044 RBP: ffff90e38035c024 R08: 0000000000000002 R09: 0000000000000006 R10: ffff90e38035c02e R11: 0000000000000020 R12: ffff90e380bac000 R13: ffffe3a7456d9200 R14: 0000000000001b81 R15: ffffe3a7456d9200 FS: 00007f2e4e8a15c0(0000) GS:ffff90e3fbc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 00000001150c6003 CR4: 0000000000170ee0 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x76/0x170 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x65/0x150 ? asm_exc_page_fault+0x22/0x30 ? trace_event_raw_event_writeback_folio_template+0x76/0xf0 folio_wait_writeback+0x6b/0x80 shmem_swapin_folio+0x24a/0x500 ? filemap_get_entry+0xe3/0x140 shmem_get_folio_gfp+0x36e/0x7c0 ? find_busiest_group+0x43/0x1a0 shmem_fault+0x76/0x2a0 ? __update_load_avg_cfs_rq+0x281/0x2f0 __do_fault+0x33/0x130 do_read_fault+0x118/0x160 do_pte_missing+0x1ed/0x2a0 __handle_mm_fault+0x566/0x630 handle_mm_fault+0x91/0x210 do_user_addr_fault+0x22c/0x740 exc_page_fault+0x65/0x150 asm_exc_page_fault+0x22/0x30 This problem arises from the fact that the repurposed writeback_dirty_page trace event code was written assuming that every pointer to mapping (struct address_space) would come from a file-mapped page-cache object, thus mapping->host would always be populated, and that was a valid case before commit 19343b5. The swap-cache address space (swapper_spaces), however, doesn't populate its ->host (struct inode) pointer, thus leading to the crashes in the corner-case aforementioned. commit 19343b5 ended up breaking the assignment of __entry->name and __entry->ino for the wait_on_page_writeback tracepoint -- both dependent on mapping->host carrying a pointer to a valid inode. The assignment of __entry->name was fixed by commit 68f23b8 ("memcg: fix a crash in wb_workfn when a device disappears"), and this commit fixes the remaining case, for __entry->ino. Link: https://lkml.kernel.org/r/20230606233613.1290819-1-aquini@redhat.com Fixes: 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") Signed-off-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Yafang Shao <laoar.shao@gmail.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2174a08 ] syzbot managed to trigger a divide error [1] in netem. It could happen if q->rate changes while netem_enqueue() is running, since q->rate is read twice. It turns out netem_change() always lacked proper synchronization. [1] divide error: 0000 [#1] SMP KASAN CPU: 1 PID: 7867 Comm: syz-executor.1 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 RIP: 0010:div64_u64 include/linux/math64.h:69 [inline] RIP: 0010:packet_time_ns net/sched/sch_netem.c:357 [inline] RIP: 0010:netem_enqueue+0x2067/0x36d0 net/sched/sch_netem.c:576 Code: 89 e2 48 69 da 00 ca 9a 3b 42 80 3c 28 00 4c 8b a4 24 88 00 00 00 74 0d 4c 89 e7 e8 c3 4f 3b fd 48 8b 4c 24 18 48 89 d8 31 d2 <49> f7 34 24 49 01 c7 4c 8b 64 24 48 4d 01 f7 4c 89 e3 48 c1 eb 03 RSP: 0018:ffffc9000dccea60 EFLAGS: 00010246 RAX: 000001a442624200 RBX: 000001a442624200 RCX: ffff888108a4f000 RDX: 0000000000000000 RSI: 000000000000070d RDI: 000000000000070d RBP: ffffc9000dcceb90 R08: ffffffff849c5e26 R09: fffffbfff10e1297 R10: 0000000000000000 R11: dffffc0000000001 R12: ffff888108a4f358 R13: dffffc0000000000 R14: 0000001a8cd9a7ec R15: 0000000000000000 FS: 00007fa73fe18700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa73fdf7718 CR3: 000000011d36e000 CR4: 0000000000350ee0 Call Trace: <TASK> [<ffffffff84714385>] __dev_xmit_skb net/core/dev.c:3931 [inline] [<ffffffff84714385>] __dev_queue_xmit+0xcf5/0x3370 net/core/dev.c:4290 [<ffffffff84d22df2>] dev_queue_xmit include/linux/netdevice.h:3030 [inline] [<ffffffff84d22df2>] neigh_hh_output include/net/neighbour.h:531 [inline] [<ffffffff84d22df2>] neigh_output include/net/neighbour.h:545 [inline] [<ffffffff84d22df2>] ip_finish_output2+0xb92/0x10d0 net/ipv4/ip_output.c:235 [<ffffffff84d21e63>] __ip_finish_output+0xc3/0x2b0 [<ffffffff84d10a81>] ip_finish_output+0x31/0x2a0 net/ipv4/ip_output.c:323 [<ffffffff84d10f14>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff84d10f14>] ip_output+0x224/0x2a0 net/ipv4/ip_output.c:437 [<ffffffff84d123b5>] dst_output include/net/dst.h:444 [inline] [<ffffffff84d123b5>] ip_local_out net/ipv4/ip_output.c:127 [inline] [<ffffffff84d123b5>] __ip_queue_xmit+0x1425/0x2000 net/ipv4/ip_output.c:542 [<ffffffff84d12fdc>] ip_queue_xmit+0x4c/0x70 net/ipv4/ip_output.c:556 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230620184425.1179809-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…phys [ Upstream commit 85d38d5 ] When booting with "intremap=off" and "x2apic_phys" on the kernel command line, the physical x2APIC driver ends up being used even when x2APIC mode is disabled ("intremap=off" disables x2APIC mode). This happens because the first compound condition check in x2apic_phys_probe() is false due to x2apic_mode == 0 and so the following one returns true after default_acpi_madt_oem_check() having already selected the physical x2APIC driver. This results in the following panic: kernel BUG at arch/x86/kernel/apic/io_apic.c:2409! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc2-ver4.1rc2 #2 Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021 RIP: 0010:setup_IO_APIC+0x9c/0xaf0 Call Trace: <TASK> ? native_read_msr apic_intr_mode_init x86_late_time_init start_kernel x86_64_start_reservations x86_64_start_kernel secondary_startup_64_no_verify </TASK> which is: setup_IO_APIC: apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); for_each_ioapic(ioapic) BUG_ON(mp_irqdomain_create(ioapic)); Return 0 to denote that x2APIC has not been enabled when probing the physical x2APIC driver. [ bp: Massage commit message heavily. ] Fixes: 9ebd680 ("x86, apic: Use probe routines to simplify apic selection") Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kishon Vijay Abraham I <kvijayab@amd.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230616212236.1389-1-dheerajkumar.srivastava@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>

The driver performs DMA-mapping of entire RX buffer in arasan_gemac_alloc_rx_desc(). But appropriate unmapping in arasan_gemac_rx_handoff() is done for buffer size that is equal to length of received packet. As a result, if the size of received packet is less than the size of RX buffer and CONFIG_DMA_API_DEBUG is enabled, an error occurs: [ 65.586957] arasan-gemac 10200000.ethernet eth0: link up (1000/Full) [ 65.594171] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 65.632268] ------------[ cut here ]------------ [ 65.637456] DMA-API: arasan-gemac 10200000.ethernet: device driver frees DMA memory with different size [device address=0x0000000090208040] [map size=1664 bytes] [unmap size=60 bytes] [ 65.655747] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:974 check_unmap+0x440/0xa00 [ 65.664394] Modules linked in: dp83867 cfg80211 cp210x mve_base(O) Felix(O) snd_soc_es8316 elcore50(O) usbserial silvaco_qspi elcore50_mmualloc(O) snd_soc_hdmi_codec snd_soc_elvees_mfbsp irq_elvees_qlic rtc_rv8803 designware_i2s sensor_phy(O) mve_rsrc(O) i2c_mux_pca954x i2c_mux snd_soc_simple_card snd_soc_simple_card_utils snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd leds_gpio soundcore led_class dmabuf_exporter(O) fuse [ 65.706819] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.10.179 #1 [ 65.715176] Hardware name: ELV-MC03-SMARC r1.0, Rock Pi N10 (DT) [ 65.721886] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 65.728594] pc : check_unmap+0x440/0xa00 [ 65.732973] lr : check_unmap+0x440/0xa00 [ 65.737350] sp : ffffffc01150bc20 [ 65.741047] x29: ffffffc01150bc20 x28: ffffff8081b568d0 [ 65.746981] x27: 000000000000003c x26: ffffffc011469000 [ 65.752916] x25: ffffffc01150bcc0 x24: 0000000000000000 [ 65.758842] x23: 0000000000000000 x22: ffffffc01127a9f0 [ 65.764769] x21: ffffffc01130e000 x20: ffffffc01146b450 [ 65.770703] x19: ffffff80809e7580 x18: 0000000000000010 [ 65.776636] x17: 0000000000000000 x16: 0000000000000000 [ 65.782569] x15: ffffffc0112844f0 x14: 2065636976656420 [ 65.788503] x13: 3a74656e72656874 x12: 414d442073656572 [ 65.794437] x11: 6620726576697264 x10: ffffffc0112f52a8 [ 65.800371] x9 : ffffffc0100b593c x8 : 0000000000000001 [ 65.806306] x7 : 0000000000017fe8 x6 : 0000000000000001 [ 65.812232] x5 : ffffff84ef0c7a48 x4 : 0000000000000000 [ 65.818165] x3 : 0000000000000027 x2 : 0000000000000023 [ 65.824100] x1 : 0000000000000000 x0 : 0000000000000000 [ 65.830026] Call trace: [ 65.832757] check_unmap+0x440/0xa00 [ 65.836750] debug_dma_unmap_page+0xa0/0xb0 [ 65.841422] dma_unmap_page_attrs+0xd4/0x1e0 [ 65.846195] arasan_gemac_rx_poll+0x80/0x270 [ 65.850967] net_rx_action+0x130/0x410 [ 65.855153] __do_softirq+0x180/0x42c [ 65.859243] irq_exit+0xe0/0xf0 [ 65.862750] __handle_domain_irq+0x70/0xd0 [ 65.867323] gic_handle_irq+0x60/0x12c [ 65.871509] el1_irq+0xcc/0x180 [ 65.875018] arch_cpu_idle+0x18/0x30 [ 65.879004] default_idle_call+0x4c/0x190 [ 65.883475] do_idle+0x244/0x290 [ 65.887077] cpu_startup_entry+0x2c/0x70 [ 65.891457] rest_init+0xc4/0xd4 [ 65.895064] arch_call_rest_init+0x18/0x24 [ 65.899637] start_kernel+0x514/0x550 [ 65.903724] ---[ end trace d08a91e873975ee0 ]--- [ 65.908878] DMA-API: Mapped at: [ 65.912385] debug_dma_map_page+0x68/0x110 [ 65.916957] dma_map_page_attrs+0x160/0x240 [ 65.921627] arasan_gemac_alloc_rx_desc+0xbc/0x1f0 [ 65.926977] arasan_gemac_start_mac+0xdc/0x3f0 [ 65.931938] arasan_gemac_open+0x24/0x310 Issue: #MCOM03SW-1993 Signed-off-by: Omar Al-Wadi <oalwadi@elvees.com> Change-Id: I6f77b7739d48398a0e8f7e8a516f5123ddf84960

The size of mcom03_hsperiph_conf_items array must be the same as 'num_custom_params' field of struct pinctrl_desc. Reading from file pinconf-groups in mcom03-hsperiph-pinctrl driver leads to this segmentation fault error: [ 46.250876] Unable to handle kernel paging request at virtual address 0000000100000080 [ 46.259775] Mem abort info: [ 46.262895] ESR = 0x96000005 [ 46.266308] EC = 0x25: DABT (current EL), IL = 32 bits [ 46.272363] SET = 0, FnV = 0 [ 46.275776] EA = 0, S1PTW = 0 [ 46.279307] Data abort info: [ 46.282526] ISV = 0, ISS = 0x00000005 [ 46.286810] CM = 0, WnR = 0 [ 46.290139] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000906c34000 [ 46.297337] [0000000100000080] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 46.307092] Internal error: Oops: 96000005 [#1] SMP [ 46.312541] Modules linked in: snd_soc_hdmi_codec motorcomm cfg80211 ahci mve_base(O) libahci mfbsp_can libata elcore50(O) can_dev mve_rsrc(O) elcore50_mmualloc(O) lontiume [ 46.360904] CPU: 3 PID: 261 Comm: cat Tainted: G O 5.10.179 #48 [ 46.368968] Hardware name: ELV-MC03-SMARC r2.6.1, ELV-SMARC-CB r2.10.3 (DT) [ 46.376745] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 46.383465] pc : __pi_strlen+0x10/0x84 [ 46.387648] lr : seq_puts+0x2c/0x90 [ 46.391539] sp : ffffffc011c1bb20 [ 46.395237] x29: ffffffc011c1bb20 x28: ffffffc010d82c48 [ 46.401172] x27: 0000000000000000 x26: 0000000000000001 [ 46.407107] x25: ffffff8080a68000 x24: ffffffc011c1bc14 [ 46.413033] x23: 0000000000000002 x22: ffffff8082243078 [ 46.418966] x21: ffffffc010d83ca0 x20: 0000000100000080 [ 46.424900] x19: ffffff8082243078 x18: 0000000000000000 [ 46.430834] x17: 0000000000000000 x16: 0000000000000000 [ 46.436768] x15: ffffff8081e75830 x14: ffffffffffffffff [ 46.442702] x13: ffffff8086ee4000 x12: 0000000000000010 [ 46.448636] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 46.454571] x9 : ffffffc01053a7a8 x8 : 7f7f7f7f7f7f7f7f [ 46.460496] x7 : 0000000000000000 x6 : ffffff8086ee30cd [ 46.466430] x5 : 8080808080800000 x4 : 0000000000000000 [ 46.472364] x3 : 000000000000202c x2 : 00000000000000cd [ 46.478296] x1 : 0000000100000080 x0 : 0000000100000080 [ 46.484231] Call trace: [ 46.486965] __pi_strlen+0x10/0x84 [ 46.490766] pinconf_generic_dump_one+0x108/0x1e0 [ 46.496018] pinconf_generic_dump_pins+0xbc/0xe0 [ 46.501173] pinconf_groups_show+0xbc/0x110 [ 46.505843] seq_read_iter+0x1bc/0x460 [ 46.510027] seq_read+0xe4/0x140 [ 46.513631] full_proxy_read+0x68/0xc0 [ 46.517817] vfs_read+0xb4/0x1e0 [ 46.521418] ksys_read+0x74/0x110 [ 46.525117] __arm64_sys_read+0x24/0x30 [ 46.529403] do_el0_svc+0x8c/0x190 [ 46.533205] el0_svc+0x20/0x30 [ 46.536613] el0_sync_handler+0xb0/0xe0 [ 46.540895] el0_sync+0x180/0x1c0 [ 46.544600] Code: b200c3eb 927cec01 f2400c07 54000261 (a8c10c22) [ 46.551408] ---[ end trace ba437b61e1cf0ec6 ]--- Segmentation fault Issue: #MCOM03SW-2517 Change-Id: I669d3330e27a7f68fd71b030a32a47187508f263 Signed-off-by: Omar Al-Wadi <oalwadi@elvees.com>

[ Upstream commit d12f558 ] [BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly. kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_object_size include/linux/ucopysize.h:22 [inline] check_copy_size include/linux/ucopysize.h:59 [inline] copy_to_user include/linux/uaccess.h:219 [inline] listxattr+0xb0/0x170 fs/xattr.c:926 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x137/0x320 fs/xattr.c:988 __do_sys_listxattr fs/xattr.c:1001 [inline] __se_sys_listxattr fs/xattr.c:998 [inline] __x64_sys_listxattr+0x7f/0xd0 fs/xattr.c:998 ... [CAUSE] Commit 936b883 ("ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().") replaced the old per-handler list accounting with ocfs2_xattr_list_entry(), but it kept using size == 0 to detect probe mode. That assumption stops being true once ocfs2_listxattr() finishes the inline-xattr pass. If the inline names fill the caller buffer exactly, the block-xattr pass runs with a non-NULL buffer and a remaining size of zero. ocfs2_xattr_list_entry() then skips the bounds check, keeps counting block names, and returns a positive size larger than the supplied buffer. [FIX] Detect probe mode by testing whether the destination buffer pointer is NULL instead of whether the remaining size is zero. That restores the pre-refactor behavior and matches the OCFS2 getxattr helpers. Once the remaining buffer reaches zero while more names are left, the block-xattr pass now returns -ERANGE instead of reporting a size larger than the allocated list buffer. Link: https://lkml.kernel.org/r/20260410040339.3837162-1-gality369@gmail.com Fixes: 936b883 ("ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().") Signed-off-by: ZhengYuan Huang <gality369@gmail.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 70b6728 ] [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7bbfb55a966d [CAUSE] ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a user-controlled group block before ocfs2_verify_group_and_input() validates that block number. That helper is only valid for newly allocated metadata and asserts that the block is not already present in the chosen metadata cache. The code also uses INODE_CACHE(inode) even though the group descriptor belongs to main_bm_inode and later journal accesses use that cache context instead. [FIX] Validate the on-disk group descriptor before caching it, then add it to the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the validation failure path separate from the later cleanup path so we only remove the buffer from that cache after it has actually been inserted. This keeps the group buffer lifetime consistent across validation, journaling, and cleanup. Link: https://lkml.kernel.org/r/20260410020209.3786348-1-gality369@gmail.com Fixes: 7909f2b ("[PATCH 2/2] ocfs2: Implement group add for online resize") Signed-off-by: ZhengYuan Huang <gality369@gmail.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4d328dd ] bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast path and the iter prog attempts to update a sockmap. Which ends up spinning at sock_map_update_elem()'s bh_lock_sock(): WARNING: possible recursive locking detected test_progs/1393 is trying to acquire lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0 but task is already holding lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_UNIX); lock(slock-AF_UNIX); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by test_progs/1393: #0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0 #1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0 #2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 #3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00 Call Trace: dump_stack_lvl+0x5d/0x80 print_deadlock_bug.cold+0xc0/0xce __lock_acquire+0x130f/0x2590 lock_acquire+0x14e/0x2b0 _raw_spin_lock+0x30/0x40 sock_map_update_elem+0xdb/0x1f0 bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4 bpf_iter_run_prog+0x5b9/0xb00 bpf_iter_unix_seq_show+0x1f7/0x2e0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 2c860a4 ("bpf: af_unix: Implement BPF iterator for UNIX domain socket.") Suggested-by: Kuniyuki Iwashima <kuniyu@google.com> Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260414-unix-proto-update-null-ptr-deref-v4-2-2af6fe97918e@rbox.co Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2091c6a ] The vport netlink reply helpers allocate a fixed-size skb with nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID array via ovs_vport_get_upcall_portids(). Since ovs_vport_set_upcall_portids() accepts any non-zero multiple of sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID array large enough to overflow the reply buffer, causing nla_put() to fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with unprivileged user namespaces enabled (e.g., Ubuntu default), this is reachable via unshare -Urn since OVS vport mutation operations use GENL_UNS_ADMIN_PERM. kernel BUG at net/openvswitch/datapath.c:2414! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1 RIP: 0010:ovs_vport_cmd_set+0x34c/0x400 Call Trace: <TASK> genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116) genl_rcv_msg (net/netlink/genetlink.c:1194) netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Kernel panic - not syncing: Fatal exception Reject attempts to set more PIDs than nr_cpu_ids in ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply size in ovs_vport_cmd_msg_size() based on that bound, similar to the existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already used by the per-CPU dispatch configuration on the datapath side (ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the two sides stay consistent. Fixes: 5cd667b ("openvswitch: Allow each vport to have an array of 'port_id's.") Reported-by: Xiang Mei <xmei5@asu.edu> Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reviewed-by: Ilya Maximets <i.maximets@ovn.org> Link: https://patch.msgid.link/20260416024653.153456-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2195574 ] nf_osf_match_one() computes ctx->window % f->wss.val in the OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a subsequent matching TCP SYN divides by zero and panics the kernel. Reject the bogus fingerprint in nfnl_osf_add_callback() above the per-option for-loop. f->wss is per-fingerprint, not per-option, so the check must run regardless of f->opt_num (including 0). Also reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that as "should not happen". Crash: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: <IRQ> nf_osf_match (net/netfilter/nfnetlink_osf.c:220) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:348) nf_hook_slow (net/netfilter/core.c:622) ip_local_deliver (net/ipv4/ip_input.c:265) ip_rcv (include/linux/skbuff.h:1162) __netif_receive_skb_one_core (net/core/dev.c:6181) process_backlog (net/core/dev.c:6642) __napi_poll (net/core/dev.c:7710) net_rx_action (net/core/dev.c:7945) handle_softirqs (kernel/softirq.c:622) Fixes: 11eeef4 ("netfilter: passive OS fingerprint xtables match") Reported-by: Weiming Shi <bestswngs@gmail.com> Suggested-by: Florian Westphal <fw@strlen.de> Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Xiang Mei <xmei5@asu.edu> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e766074 ] slhc_init() accepts rslots == 0 as a valid configuration, with the documented meaning of 'no receive compression'. In that case the allocation loop in slhc_init() is skipped, so comp->rstate stays NULL and comp->rslot_limit stays 0 (from the kzalloc of struct slcompress). The receive helpers do not defend against that configuration. slhc_uncompress() dereferences comp->rstate[x] when the VJ header carries an explicit connection ID, and slhc_remember() later assigns cs = &comp->rstate[...] after only comparing the packet's slot number to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the range check, and the code dereferences a NULL rstate. The configuration is reachable in-tree through PPP. PPPIOCSMAXCID stores its argument in a signed int, and (val >> 16) uses arithmetic shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1 is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because /dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path is reachable from an unprivileged user namespace. Once the malformed VJ state is installed, any inbound VJ-compressed or VJ-uncompressed frame that selects slot 0 crashes the kernel in softirq context: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519) Call Trace: <TASK> ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466) ppp_input (drivers/net/ppp/ppp_generic.c:2359) ppp_async_process (drivers/net/ppp/ppp_async.c:492) tasklet_action_common (kernel/softirq.c:926) handle_softirqs (kernel/softirq.c:623) run_ksoftirqd (kernel/softirq.c:1055) smpboot_thread_fn (kernel/smpboot.c:160) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) </TASK> Reject the receive side on such instances instead of touching rstate. slhc_uncompress() falls through to its existing 'bad' label, which bumps sls_i_error and enters the toss state. slhc_remember() mirrors that with an explicit sls_i_error increment followed by slhc_toss(); the sls_i_runt counter is not used here because a missing rstate is an internal configuration state, not a runt packet. The transmit path is unaffected: the only in-tree caller that picks rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and slip.c always calls slhc_init(16, 16), so comp->tstate remains valid and slhc_compress() continues to work. Fixes: 4ab42d7 ("ppp, slip: Validate VJ compression slot parameters completely") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260415204130.258866-2-bestswngs@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3d07ca5 ] When a TAPRIO child qdisc is deleted via RTM_DELQDISC, taprio_graft() is called with new == NULL and stores NULL into q->qdiscs[cl - 1]. Subsequent RTM_GETTCLASS dump operations walk all classes via taprio_walk() and call taprio_dump_class(), which calls taprio_leaf() returning the NULL pointer, then dereferences it to read child->handle, causing a kernel NULL pointer dereference. The bug is reachable with namespace-scoped CAP_NET_ADMIN on any kernel with CONFIG_NET_SCH_TAPRIO enabled. On systems with unprivileged user namespaces enabled, an unprivileged local user can trigger a kernel panic by creating a taprio qdisc inside a new network namespace, grafting an explicit child qdisc, deleting it, and requesting a class dump. The RTM_GETTCLASS dump itself requires no capability. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000007: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:taprio_dump_class (net/sched/sch_taprio.c:2478) Call Trace: <TASK> tc_fill_tclass (net/sched/sch_api.c:1966) qdisc_class_dump (net/sched/sch_api.c:2326) taprio_walk (net/sched/sch_taprio.c:2514) tc_dump_tclass_qdisc (net/sched/sch_api.c:2352) tc_dump_tclass_root (net/sched/sch_api.c:2370) tc_dump_tclass (net/sched/sch_api.c:2431) rtnl_dumpit (net/core/rtnetlink.c:6864) netlink_dump (net/netlink/af_netlink.c:2325) rtnetlink_rcv_msg (net/core/rtnetlink.c:6959) netlink_rcv_skb (net/netlink/af_netlink.c:2550) </TASK> Fix this by substituting &noop_qdisc when new is NULL in taprio_graft(), a common pattern used by other qdiscs (e.g., multiq_graft()) to ensure the q->qdiscs[] slots are never NULL. This makes control-plane dump paths safe without requiring individual NULL checks. Since the data-plane paths (taprio_enqueue and taprio_dequeue_from_txq) previously had explicit NULL guards that would drop/skip the packet cleanly, update those checks to test for &noop_qdisc instead. Without this, packets would reach taprio_enqueue_one() which increments the root qdisc's qlen and backlog before calling the child's enqueue; noop_qdisc drops the packet but those counters are never rolled back, permanently inflating the root qdisc's statistics. After this change *old can be a valid qdisc, NULL, or &noop_qdisc. Only call qdisc_put(*old) in the first case to avoid decreasing noop_qdisc's refcount, which was never increased. Fixes: 665338b ("net/sched: taprio: dump class stats for the actual q->qdiscs[]") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Tested-by: Weiming Shi <bestswngs@gmail.com> Link: https://patch.msgid.link/20260422161958.2517539-3-bestswngs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 54ef024 ] ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi(). When the VSI rebuild fails (e.g. during NVM firmware update via nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path, leaving txq_map and rxq_map as NULL. The subsequent unconditional call to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0]. The single-VF reset path in ice_reset_vf() already handles this correctly by checking the return value of ice_vf_reconfig_vsi() and skipping ice_vf_post_vsi_rebuild() on failure. Apply the same pattern to ice_reset_all_vfs(): check the return value of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and ice_eswitch_attach_vf() on failure. The VF is left safely disabled (ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can be recovered via a VFLR triggered by a PCI reset of the VF (sysfs reset or driver rebind). Note that this patch does not prevent the VF VSI rebuild from failing during NVM update — the underlying cause is firmware being in a transitional state while the EMP reset is processed, which can cause Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This patch only prevents the subsequent NULL pointer dereference that crashes the kernel when the rebuild does fail. crash> bt PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5" #0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee #1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba #2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540 #3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda #4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997 #5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595 #6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2 [exception RIP: ice_ena_vf_q_mappings+0x79] RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206 RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000 RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040 R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000 R13: 0000000000000010 R14: R15: ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice] #8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice] #9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice] #10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4 #11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de #12 [ff72159bcfe5bf18] kthread at ffffffffaa946663 #13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9 The panic occurs attempting to dereference the NULL pointer in RDX at ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi). The faulting VSI is an allocated slab object but not fully initialized after a failed ice_vsi_rebuild(): crash> struct ice_vsi 0xff34c9efc27d4828 netdev = 0x0, rx_rings = 0x0, tx_rings = 0x0, q_vectors = 0x0, txq_map = 0x0, rxq_map = 0x0, alloc_txq = 0x10, num_txq = 0x10, alloc_rxq = 0x10, num_rxq = 0x10, The nvmupdate64e process was performing NVM firmware update: crash> bt 0xff34c9edd1a30000 PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e" #0 [ff72159bcd617618] __schedule at ffffffffab5333f8 #4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice] #5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice] #6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice] #7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice] #8 [ff72159bcd6178b8] ice_read_flat_nvm at ffffffffc0a4034c [ice] #9 [ff72159bcd617918] ice_devlink_nvm_snapshot at ffffffffc0a6ffa5 [ice] dmesg: ice 0000:13:00.0: firmware recommends not updating fw.mgmt, as it may result in a downgrade. continuing anyways ice 0000:13:00.1: ice_init_nvm failed -5 ice 0000:13:00.1: Rebuild failed, unload and reload driver Fixes: 12bb018 ("ice: Refactor VF reset") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-5-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ffc2c8c ] Initialize u64 stats as it uses seq counter on 32bit machines as suggested by lockdep below. [ 1.830953][ T1] INFO: trying to register non-static key. [ 1.830993][ T1] The code is fine but needs lockdep annotation, or maybe [ 1.831027][ T1] you didn't initialize this object before use? [ 1.831057][ T1] turning off the locking correctness validator. [ 1.831090][ T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc2-v7l+ #1 PREEMPT [ 1.831097][ T1] Tainted: [W]=WARN [ 1.831099][ T1] Hardware name: BCM2711 [ 1.831101][ T1] Call trace: [ 1.831104][ T1] unwind_backtrace from show_stack+0x18/0x1c [ 1.831120][ T1] show_stack from dump_stack_lvl+0x8c/0xcc [ 1.831129][ T1] dump_stack_lvl from register_lock_class+0x9e8/0x9fc [ 1.831141][ T1] register_lock_class from __lock_acquire+0x420/0x22c0 [ 1.831154][ T1] __lock_acquire from lock_acquire+0x130/0x3f8 [ 1.831166][ T1] lock_acquire from bcmgenet_get_stats64+0x4a4/0x4c8 [ 1.831176][ T1] bcmgenet_get_stats64 from dev_get_stats+0x4c/0x408 [ 1.831184][ T1] dev_get_stats from rtnl_fill_stats+0x38/0x120 [ 1.831193][ T1] rtnl_fill_stats from rtnl_fill_ifinfo+0x7f8/0x1890 [ 1.831203][ T1] rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xd0/0x138 [ 1.831214][ T1] rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x48/0x8c [ 1.831225][ T1] rtmsg_ifinfo from register_netdevice+0x8c0/0x95c [ 1.831237][ T1] register_netdevice from register_netdev+0x28/0x40 [ 1.831247][ T1] register_netdev from bcmgenet_probe+0x690/0x6bc [ 1.831255][ T1] bcmgenet_probe from platform_probe+0x64/0xbc [ 1.831263][ T1] platform_probe from really_probe+0xd0/0x2d4 [ 1.831269][ T1] really_probe from __driver_probe_device+0x90/0x1a4 [ 1.831273][ T1] __driver_probe_device from driver_probe_device+0x38/0x11c [ 1.831278][ T1] driver_probe_device from __driver_attach+0x9c/0x18c [ 1.831282][ T1] __driver_attach from bus_for_each_dev+0x84/0xd4 [ 1.831291][ T1] bus_for_each_dev from bus_add_driver+0xd4/0x1f4 [ 1.831303][ T1] bus_add_driver from driver_register+0x88/0x120 [ 1.831312][ T1] driver_register from do_one_initcall+0x78/0x360 [ 1.831320][ T1] do_one_initcall from kernel_init_freeable+0x2bc/0x314 [ 1.831331][ T1] kernel_init_freeable from kernel_init+0x1c/0x144 [ 1.831339][ T1] kernel_init from ret_from_fork+0x14/0x20 [ 1.831344][ T1] Exception stack(0xf082dfb0 to 0xf082dff8) [ 1.831349][ T1] dfa0: 00000000 00000000 00000000 00000000 [ 1.831353][ T1] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.831356][ T1] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 Fixes: 59aa6e3 ("net: bcmgenet: switch to use 64bit statistics") Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250702092417.46486-1-ryotkkr98@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 4b83cbc upstream. session_fd_check() walks the per-inode m_op_list during durable-handle session teardown and sets op->conn = NULL for every opinfo whose conn matched the closing session's connection. The matching opinfo, however, stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list because destroy_lease_table() only runs on full TCP-connection teardown, not on SESSION_LOGOFF. If the same TCP connection then negotiates a fresh session with the same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a lease context on a different inode, find_same_lease_key() walks lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(), which unconditionally dereferences opinfo->conn->ClientGUID. The conn pointer is NULL and the kernel panics. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 7039050: general protection fault, probably for non-canonical address 0xdffffc0000000069: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:bcmp+0x5b/0x230 Call Trace: compare_guid_key+0x4b/0xd0 find_same_lease_key+0x324/0x690 smb2_open+0x6aea/0x8e60 handle_ksmbd_work+0x796/0xee0 ... Faulting address 0x348 is the offset of ClientGUID within struct ksmbd_conn, confirming opinfo->conn was NULL. Read opinfo->conn once and bail out if it has been cleared by a concurrent session_fd_check(). A half-detached opinfo cannot be the owner of an active lease, so returning 0 is the correct match result. Fixes: c8efcc7 ("ksmbd: add support for durable handles v1/v2") Cc: stable@vger.kernel.org Signed-off-by: Jeremy Laratro <research@aradex.io> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 90d77b3 ] Starting with commit bdb249f ("ARM: integrator: read counter using syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible which in turn calls of_syscon_register. This function allocates memory. Since the memory management code has not been initialized at that time, the call always fails. It either returns -ENOMEM or crashes as follows. Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPT Hardware name: ARM Integrator/CP (Device Tree) PC is at __kmalloc_cache_noprof+0xec/0x39c LR is at __kmalloc_cache_noprof+0x34/0x39c ... Call trace: __kmalloc_cache_noprof from of_syscon_register+0x7c/0x310 of_syscon_register from device_node_get_regmap+0xa4/0xb0 device_node_get_regmap from intcp_init_early+0xc/0x40 intcp_init_early from start_kernel+0x60/0x688 start_kernel from 0x0 The crash is seen due to a dereferenced pointer which is not supposed to be NULL but is NULL if the memory management subsystem has not been initialized. The crash is not seen with all versions of gcc. Some versions such as gcc 9.x apparently do not dereference the pointer, presumably if tracing is disabled. The problem has been reproduced with gcc 10.x, 11.x, and 13.x. Either case, if the crash is not seen, the call to syscon_regmap_lookup_by_compatible returns -ENOMEM, and sched_clock_register is never called. Fix the problem by moving the early initialization code into the standard machine initialization code. Fixes: bdb249f ("ARM: integrator: read counter using syscon/regmap") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/20250518164118.3859567-1-linux@roeck-us.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20260505-integrator-fixes-v1-1-56ab9aac59db@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ile() [ Upstream commit c73370c ] The trace event btrfs_sync_file() is called in an atomic context (all trace events are) and its call to dput(), which is needed due to the call to dget_parent(), can sleep, triggering a kernel splat. This can be reproduced by enabling the trace event and running btrfs/056 from fstests for example. The splat shown in dmesg is the following: [53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970 [53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io [53.988] preempt_count: 2, expected: 0 [53.967] RCU nest depth: 0, expected: 0 [53.943] Preemption disabled at: [53.944] [<0000000000000000>] 0x0 [54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full) [54.070] Tainted: [W]=WARN [54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [54.072] Call Trace: [54.074] <TASK> [54.076] dump_stack_lvl+0x56/0x80 [54.079] __might_resched.cold+0xd6/0x10f [54.072] dput.part.0+0x24/0x110 [54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs] [54.089] btrfs_sync_file+0x1ed/0x530 [btrfs] [54.087] ? __handle_mm_fault+0x8ae/0xed0 [54.089] btrfs_do_write_iter+0x172/0x210 [btrfs] [54.091] vfs_write+0x21f/0x450 [54.094] __x64_sys_pwrite64+0x8d/0xc0 [54.096] ? do_user_addr_fault+0x20c/0x670 [54.099] do_syscall_64+0x60/0xf20 [54.092] ? clear_bhb_loop+0x60/0xb0 [54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e So stop using dget_parent() and dput() and access the parent dentry directly as dentry->d_parent. This is also what ext4 is doing in its equivalent trace event ext4_sync_file_enter(). Fixes: a85b46d ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()") Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ch_irq_work_raise() [ Upstream commit 31467b2 ] A kernel panic is observed when handling machine check exceptions from real mode. BUG: Unable to handle kernel data access on read at 0xc00000006be21300 Oops: Kernel access of bad area, sig: 11 [#1] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005 CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0 NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70 LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150 Call Trace: [c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150 [c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0 The crash occurs because arch_irq_work_raise() calls preempt_disable() from machine check exception (MCE) handlers running in real mode. In this context, accessing the preempt_count can fault, leading to the panic. The preempt_disable()/preempt_enable() pair in arch_irq_work_raise() was originally added by commit 0fe1ac4 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") to avoid races while raising irq work from exception context. Later, commit 471ba0e ("irq_work: Do not raise an IPI when queueing work on the local CPU") added preemption protection in irq_work_queue() path, while commit 20b8769 ("irq_work: Use per cpu atomics instead of regular atomics") added equivalent protection in irq_work_queue_on() before reaching arch_irq_work_raise(): irq_work_queue() / irq_work_queue_on() -> preempt_disable() -> __irq_work_queue_local() -> irq_work_raise() -> arch_irq_work_raise() As a result, callers other than mce_irq_work_raise() already execute with preemption disabled, making the additional preempt_disable()/preempt_enable() pair in arch_irq_work_raise() redundant. The arch_irq_work_raise() function executes in NMI context when called from MCE handler. Hence we will not be preempted or scheduled out since we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove the preempt_disable()/preempt_enable() calls from here. Remove it to avoid accessing preempt_count from real mode context. Fixes: cc15ff3 ("powerpc/mce: Avoid using irq_work_queue() in realmode") Suggested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Sayali Patil <sayalip@linux.ibm.com> [Maddy: Fixed the commit title] Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260513081413.222490-1-sayalip@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 5c4063c upstream. TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] <TASK> [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, before the problematic dereference, but still after a pointer to the container is captured, rendering the pointer no longer valid. Fix the issue by capturing the pointer to the container only after its potential replacement. v2: Move the container_of() inside the if block (Sebastian), - a simplified version of the commit description that explains briefly why the change is necessary (Christian). Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/14882 Fixes: 7ae0345 ("drm/i915/ttm: add tt shmem backend") Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: stable@vger.kernel.org # v5.17+ Cc: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20260508122612.469227-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 4462966) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5d7a49d upstream. Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a9 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a9 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time. Fixes: 84a9582 ("serial: core: Start managing serial controllers to enable runtime PM") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Cc: stable@vger.kernel.org # needs to use .remove_new for <= 6.10 Link: https://patch.msgid.link/alpine.DEB.2.21.2605062326540.46195@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 7cac59d upstream. Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d6 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c0 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally. Fixes: 84a9582 ("serial: core: Start managing serial controllers to enable runtime PM") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Cc: stable@vger.kernel.org # needs to use .remove_new for <= 6.10 Link: https://patch.msgid.link/alpine.DEB.2.21.2605062328480.46195@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b9ad50d ] mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. Fixes: 757642f ("gpio: mvebu: Add limited PWM support") Signed-off-by: Yun Zhou <yun.zhou@windriver.com> Link: https://patch.msgid.link/20260608084334.2960803-1-yun.zhou@windriver.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 894e036 ] mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max. Fixes: e16aea2 ("net/mlx5: Introduce access functions to modify/query vport mac lists") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260604135849.458060-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

… completion [ Upstream commit 34080db ] rds_ib_xmit_atomic() always programs a masked atomic opcode (IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD) for every RDS atomic cmsg. But the completion-side switch in rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked atomic completion falls through to default and returns rm == NULL while send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection triggers it; on hardware that natively accepts masked atomics (mlx4, mlx5) no extra setup is needed. RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR! Oops: general protection fault [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197] RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282) Call Trace: <IRQ> rds_ib_send_cqe_handler (net/rds/ib_send.c:282) poll_scq (net/rds/ib_cm.c:274) rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294) tasklet_action_common (kernel/softirq.c:943) handle_softirqs (kernel/softirq.c:573) run_ksoftirqd (kernel/softirq.c:479) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt Handle the masked atomic opcodes in the same case as the non-masked ones: they map to the same struct rds_message.atomic union member, so the existing container_of()/rds_ib_send_unmap_atomic() body is correct for them. Fixes: 20c72bd ("RDS: Implement masked atomic operations") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reviewed-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260606192447.1179255-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ister [ Upstream commit c300941 ] NAT helpers such as nf_nat_h323 store a raw pointer to module text in exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister() only unlinks the callback descriptor and never walks the expectation table, so an expectation pending at module removal survives with a dangling exp->expectfn into freed module text. When the expected connection arrives, init_conntrack() invokes exp->expectfn(), now a stale pointer into the unloaded module. Reproduced on a KASAN build by loading the H.323 helpers, creating a Q.931 expectation, unloading nf_nat_h323, then connecting to the expected port: Oops: int3: 0000 [#1] SMP KASAN NOPTI RIP: 0010:0xffffffffa06102d1 init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862) nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049) ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223) nf_hook_slow (net/netfilter/core.c:619) __ip_local_out (net/ipv4/ip_output.c:120) __tcp_transmit_skb (net/ipv4/tcp_output.c:1715) tcp_connect (net/ipv4/tcp_output.c:4374) tcp_v4_connect (net/ipv4/tcp_ipv4.c:345) __sys_connect (net/socket.c:2167) Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323] Reaching the dangling state requires CAP_SYS_MODULE in the initial user namespace to remove a NAT helper that still has live expectations, so this is a robustness fix; leaving an expectation pointing at freed text is wrong regardless. Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and drops every expectation whose ->expectfn matches the descriptor being torn down. Call it from each NAT helper's exit path after the existing RCU grace period, so no expectation outlives the code it points at and no extra synchronize_rcu() is introduced. With the fix, the same reproducer runs to completion without the Oops. Fixes: f587de0 ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port") Reported-by: Xiang Mei <xmei5@asu.edu> Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b70c687 ] addrconf_get_prefix_route() can return the fib6_null_entry sentinel entry which has a NULL fib6_table pointer. Therefore, before setting the route's expiration time, check that we are not working with this entry, as otherwise a NPD will be triggered [1]. Note that the other callers of addrconf_get_prefix_route() are not susceptible to this bug: 1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF | RTF_PREFIX_RT' flags which are not set on fib6_null_entry. 2. modify_prefix_route(): Fixed by commit a747e02 ("ipv6: avoid possible NULL deref in modify_prefix_route()"). 3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for fib6_null_entry and returns an error. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [...] Call Trace: <TASK> __kasan_check_byte (mm/kasan/common.c:573) lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1)) _raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1)) cleanup_prefix_route (net/ipv6/addrconf.c:1280) ipv6_del_addr (net/ipv6/addrconf.c:1342) inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119) inet6_rtm_deladdr (net/ipv6/addrconf.c:4812) rtnetlink_rcv_msg (net/core/rtnetlink.c:6997) netlink_rcv_skb (net/netlink/af_netlink.c:2555) netlink_unicast (net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1899) __sock_sendmsg (net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Fixes: 5eb902b ("net/ipv6: Remove expired routes with a separated list of routes.") Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com> Reviewed-by: David Ahern <dahern@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260609145448.768318-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 3c94f24 upstream. On the UDP receive path skb->dev is repurposed as dev_scratch (the truesize/state cache set by udp_set_dev_scratch()), through the union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff. When a UDP socket is in a sockmap, sk_data_ready is sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor() (sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq. If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp, bpf_skc_lookup_tcp), bpf_skc_lookup() does: if (skb->dev) caller_net = dev_net(skb->dev); skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net() dereferences it as a struct net_device * and the kernel takes a general protection fault on a non-canonical address in softirq: Oops: general protection fault, probably for non-canonical address 0x1010000800004a0 CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full) RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline] RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047 Call Trace: <IRQ> bpf_prog_4675cb904b7071f8+0x12e/0x14e bpf_prog_run_pin_on_cpu+0xc6/0x1f0 sk_psock_verdict_recv+0x1ba/0x350 udp_read_skb+0x31a/0x370 sk_psock_verdict_data_ready+0x2e3/0x600 __udp_enqueue_schedule_skb+0x4c8/0x650 udpv6_queue_rcv_one_skb+0x3ec/0x740 udp6_unicast_rcv_skb+0x11d/0x140 ip6_protocol_deliver_rcu+0x61e/0x950 ip6_input_finish+0xa9/0x150 NF_HOOK+0x286/0x2f0 ip6_input+0x117/0x220 NF_HOOK+0x286/0x2f0 __netif_receive_skb+0x85/0x200 process_backlog+0x374/0x9a0 __napi_poll+0x4f/0x1c0 net_rx_action+0x3b0/0x770 handle_softirqs+0x15a/0x460 do_softirq+0x57/0x80 </IRQ> The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which skb_set_owner_sk_safe() set just above. Fixes: 965b57b ("net: Introduce a new proto_ops ->read_skb()") Cc: stable@vger.kernel.org Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260603162737.697215-1-rhkrqnwk98@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Autoselect MFD_SYSCON when building an SMP kernel

bc2fcad

MFD_SYSCON is necessary to bring up the secondary CPU(s). Therefore select it automatically so the user won't need figure out why the kernel was unable to boot the secondary CPU(s).

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Autoselect MFD_SYSCON when building an SMP kernel#1

Autoselect MFD_SYSCON when building an SMP kernel#1
asheplyakov wants to merge 1 commit into
elvees:mcom02-4.4.yfrom
asheplyakov:mcom02-4.4.y

asheplyakov commented Aug 13, 2020

Uh oh!

Reviewers

Assignees

Labels

Milestone

Development

Uh oh!

1 participant

Uh oh!

Conversation

asheplyakov commented Aug 13, 2020

Uh oh!

Reviewers

Assignees

Labels

Milestone

Development

Uh oh!

1 participant