1.4.5 Strip sensor

Unification of the filament sensor and the strip guide/cleaner into a single component located before the hotend. A 14-second delay, configurable in the settings, is added from the moment the end of the strip is detected to ensure the strip is fully processed.

1.2

• Improvements to the web interface
• New motor spacer, requires re-printing also Body 1
• Other small improvements

cutter and filament sensor updated

608zz bearings cutter version https://github.com/function3d/petalot/blob/1d3898e29c7e2aea8eb5df6d3b6a3d68b28c794e/STLs/bottle%20Cutter%20608zz.stl

v1.1

The electronics heats the hotend and moves the motor from the first moment the firmware is updated, it also creates a wifi called PETALOT-XXXXXX to which you can connect to have access to the web interface through the IP 192.168.4.1 where you can also enter the parameters of the wifi network so that the device is accessible from the wifi network after save.

v1.0

Delete large gear for 14cm spool.stl

v1

README.md