Fix typos and formatting in documentation and comments

README.md

@@ -72,7 +72,7 @@ The companion firmware can be connected to via BLE, USB or Wi-Fi depending on th
 
 **Repeater and Room Server Firmware**
 
-The repeater and room server firmwares can be setup via USB in the web config tool.
+The repeater and room server firmware can be set up via USB in the web config tool.
 
 - https://config.meshcore.io
 
@@ -89,7 +89,7 @@ MeshCore is open-source software released under the MIT License. You are free to
 ## Contributing
 
 Please submit PR's using 'dev' as the base branch!
-For minor changes just submit your PR and we'll try to review it, but for anything more 'impactful' please open an Issue first and start a discussion. Is better to sound out what it is you want to achieve first, and try to come to a consensus on what the best approach is, especially when it impacts the structure or architecture of this codebase.
+For minor changes just submit your PR and we'll try to review it, but for anything more 'impactful' please open an Issue first and start a discussion. It is better to sound out what it is you want to achieve first, and try to come to a consensus on what the best approach is, especially when it impacts the structure or architecture of this codebase.
 
 Here are some general principles you should try to adhere to:
 * Keep it simple. Please, don't think like a high-level lang programmer. Think embedded, and keep code concise, without any unnecessary layers.

boards/esp32-s3-zero.json

@@ -1,40 +1,40 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-D ARDUINO_USB_CDC_ON_BOOT=1",
-      "-D ARDUINO_USB_MSC_ON_BOOT=0",
-      "-D ARDUINO_USB_DFU_ON_BOOT=0",
-      "-D ARDUINO_USB_MODE=1",
-      "-D ARDUINO_RUNNING_CORE=1",
-      "-D ARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "ESP32-S3-Zero",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.espressif.com",
-  "vendor": "Espressif"
-}
-
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D ARDUINO_USB_CDC_ON_BOOT=1",
+      "-D ARDUINO_USB_MSC_ON_BOOT=0",
+      "-D ARDUINO_USB_DFU_ON_BOOT=0",
+      "-D ARDUINO_USB_MODE=1",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-Zero",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.espressif.com",
+  "vendor": "Espressif"
+}
+

boards/minewsemi_me25ls01.json

@@ -1,59 +1,59 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "me25ls01-BOOT",
-    "mcu": "nrf52840",
-    "variant": "minewsemi_me25ls01",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "Minewsemi ME25LS01",
-  "upload": {
-    "maximum_ram_size": 235520,
-    "maximum_size": 811008,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://en.minewsemi.com/lora-module/lr1110-nrf52840-me25LS01",
-  "vendor": "MINEWSEMI"
-}
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "me25ls01-BOOT",
+    "mcu": "nrf52840",
+    "variant": "minewsemi_me25ls01",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "Minewsemi ME25LS01",
+  "upload": {
+    "maximum_ram_size": 235520,
+    "maximum_size": 811008,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/lr1110-nrf52840-me25LS01",
+  "vendor": "MINEWSEMI"
+}