Ssp experiment adaptation

[jkCXf9X4]

Start of discussion to extend the ls-ref to SSP as well

Please look over the sugested additions and provide comments and sugestions for improvements

[pmai]

Note that since the experiment format is really supposed to be removed from fmi-ls-ref and moved to MAP COORD prior to release of fmi-ls-ref, most of the suggested changes should be handled in a MAP-COORD controlled separate repo going forward. (The fact that they are currently contained in this repo is just to have a place to retain this prior to MAP COORD starting up properly after the coming Modelica General Assembly).

I'd also note that there should be a clear split between the experiment format, which ideally should not have any FMI/SSP-specific things, and the layered standards applying the experiments to something, which should likely contain the specific things, e.g. in fmi-ls-ref for FMI usage, and in a hypothetical ssp-ls-ref for SSP usage.

E.g. it would seem suboptimal if there is a reference from the experiment setup itself to the SSD it is supposed to be applied to, as the same experiment can usefully be applied to multiple SSDs inside an SSP - so there might be potential to split that out.

But those and other discussions are likely best kept in MAP COORD once it properly starts up.

[hubertus65]

@jkCXf9X4 Erik: Just FYI, MAP-COORD is now operational and your colleague @robha67 Robert is in the project team. If you have specific requirements w.r.t. experiments, you can discuss with Robert and have him bring it into the meeting in case we have misunderstood your intent.