Rotorflight Lua Scripts - Release Candidate 2.3.0-RC3

This is the Third Release Candidate of the Rotorflight 2.3.0 Lua Scripts for EdgeTX and OpenTX.

NOTE: The final 2.3.0 version will be released after a few release candidates. Please don't use RCs once the final release is out.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

Rotorflight setup instructions can be found on the Rotorflight website www.rotorflight.org.

Changes Since Version 2.2.1

• Added Rotorflight Widgets
  • RF Tool: shows the model name and other info and lets you configure your heli when in full screen mode. RF Tool also integrates rf2bg, so there's no need to run rf2bg using a special function anymore when using this widget.
  • RF Stats: shows Total flights and Total time when model statistics are enabled.
• Model page
  • Added support for per model statistics like Total flights and Total time.
  • When Set name on TX is used to automatically set the model name on your transmitter, rf2bg will revert to the name you specified on the transmitter when no model is connected (instead of '>Rotorflight')
• rf2bg background script
  • Custom CRSF telemetry sensors can now be deleted and discovered at any time.
  • No need to follow a special procedure anymore to get the sensors in the correct order.
• Battery page: new page for configuring and specifying your batteries.
• Governor page: added support for the new Rotorflight governor.
• Rates page: added support for Rotorflight rates.
• Rate Dynamics page: added support for Cyclic ring and Polar coordinates.
• AM32 ESC page: new page for configuring AM32 ESCs.
• BLHeli_S ESC page: new page for configuring BLHeli_S ESCs.
• Bluejay ESC page: new page for configuring Bluejay ESCs.
• FLYROTOR ESC page: updated parameters.
• Added support for configuring OMP and ZTW ESCs.
• Added support for the Radiomaster TX16S MK3.
• Added partial support for the FlySky PA01.
• Improved Touch UI with a new sleek Save button.
• Reduced memory usage.
• Various minor fixes.

Rotorflight Lua Scripts - Release Candidate 2.3.0-RC2

This is the Second Release Candidate of the Rotorflight 2.3.0 Lua Scripts for EdgeTX and OpenTX.

NOTE: The final 2.3.0 version will be released after a few release candidates. Please don't use RCs once the final release is out.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

Rotorflight setup instructions can be found on the Rotorflight website www.rotorflight.org.

Changes Since Version 2.2.1

• Added Rotorflight Widgets
  • RF Tool: shows the model name and other info and lets you configure your heli when in full screen mode. RF Tool also integrates rf2bg, so there's no need to run rf2bg using a special function anymore when using this widget.
  • RF Stats: shows Total flights and Total time when model statistics are enabled.
• Model page
  • Added support for per model statistics like Total flights and Total time.
  • When Set name on TX is used to automatically set the model name on your transmitter, rf2bg will revert to the name you specified on the transmitter when no model is connected (instead of '>Rotorflight')
• rf2bg background script
  • Custom CRSF telemetry sensors can now be deleted and discovered at any time.
  • No need to follow a special procedure anymore to get the sensors in the correct order.
• Battery page: new page for configuring and specifying your batteries.
• Governor page: added support for the new Rotorflight governor.
• Rates page: added support for Rotorflight rates.
• Rate Dynamics page: added support for Cyclic ring and Polar coordinates.
• AM32 ESC page: new page for configuring AM32 ESCs.
• BLHeli_S ESC page: new page for configuring BLHeli_S ESCs.
• Bluejay ESC page: new page for configuring Bluejay ESCs.
• FLYROTOR ESC page: updated parameters.
• Added support for configuring OMP and ZTW ESCs.
• Added support for the Radiomaster TX16S MK3.
• Added partial support for the FlySky PA01.
• Improved Touch UI with a new sleek Save button.
• Reduced memory usage.
• Various minor fixes.

Rotorflight Lua Scripts - Release Candidate 2.3.0-RC1

This is the First Release Candidate of the Rotorflight 2.3.0 Lua Scripts for EdgeTX and OpenTX.

NOTE: The final 2.3.0 version will be released after a few release candidates. Please don't use RCs once the final release is out.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

Rotorflight setup instructions can be found on the Rotorflight website www.rotorflight.org.

Changes Since Version 2.2.1

• Added Rotorflight Widgets
  • RF Tool: shows the model name and other info and lets you configure your heli when in full screen mode. RF Tool also integrates rf2bg, so there's no need to run rf2bg using a special function anymore when using this widget.
  • RF Stats: shows Total flights and Total time when model statistics are enabled.
• Model page
  • Added support for per model statistics like Total flights and Total time.
  • When Set name on TX is used to automatically set the model name on your transmitter, rf2bg will revert to the name you specified on the transmitter when no model is connected (instead of '>Rotorflight')
• rf2bg background script
  • Custom CRSF telemetry sensors can now be deleted and discovered at any time.
  • No need to follow a special procedure anymore to get the sensors in the correct order.
• Battery page: new page for configuring and specifying your batteries.
• Governor page: added support for the new Rotorflight governor.
• Rates page: added support for Rotorflight rates.
• Rate Dynamics page: added support for Cyclic ring and Polar coordinates.
• AM32 ESC page: new page for configuring AM32 ESCs.
• FLYROTOR ESC page: updated parameters.
• Added support for configuring OMP and ZTW ESCs.
• Added support for the Radiomaster TX16S MK3.
• Added partial support for the FlySky PA01.
• Improved Touch UI with a new sleek Save button.
• Reduced memory usage.
• Various minor fixes.

Rotorflight Lua Scripts - Snapshot 2.3.0-20260211

This is a development snapshot of the Rotorflight 2.3.0 Lua Scripts for EdgeTX/OpenTX.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

This version is intended for beta testing only. It may contain incomplete features or stability issues and is not recommended for end-user use.

For more information, please join the Rotorflight Discord chat.

Changes Since Version 2.2.1

• Added support for the Radiomaster TX16S MK3
• Rates page: added Rotorflight rates
• Hobbywing V5 ESC page: better support for setting BEC voltage
• Model page
  • Added support for per model statistics like Total flights and Total time
  • When Set name on TX is used to automatically set the model name on your transmitter, rf2bg will revert to the name you specified on the transmitter when no model is connected (instead of '>Rotorflight').
• rf2bg background script
  • Custom CRSF telemetry sensors can now be deleted and discovered at any time
  • No need to follow a special procedure anymore to get the sensors in the correct order
• Added support for the new Rotorflight governor
• Added partial support for the FlySky PA01
• Updated FLYROTOR ESC parameters
• Improved touch UI support
• Reduced memory usage
• Various minor fixes

Rotorflight Lua Scripts - Snapshot 2.3.0-20260208

This is a development snapshot of the Rotorflight 2.3.0 Lua Scripts for EdgeTX/OpenTX.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

This version is intended for beta testing only. It may contain incomplete features or stability issues and is not recommended for end-user use.

For more information, please join the Rotorflight Discord chat.

Changes Since Version 2.2.1

• Rates page: added Rotorflight rates
• Hobbywing V5 ESC page: better support for setting BEC voltage
• Model page
  • Added support for per model statistics like Total flights and Total time
  • When Set name on TX is used to automatically set the model name on your transmitter, rf2bg will revert to the name you specified on the transmitter when no model is connected (instead of '>Rotorflight').
• rf2bg background script
  • Custom CRSF telemetry sensors can now be deleted and discovered at any time
  • No need to follow a special procedure anymore to get the sensors in the correct order
• Added support for the new Rotorflight governor
• Added partial support for the FlySky PA01
• Updated FLYROTOR ESC parameters
• Improved touch UI support
• Reduced memory usage
• Various minor fixes

Rotorflight Lua Scripts - Snapshot 2.3.0-20251111

This is a development snapshot of the Rotorflight 2.3.0 Lua Scripts for EdgeTX/OpenTX.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

This version is intended for beta testing only. It may contain incomplete features or stability issues and is not recommended for end-user use.

For more information, please join the Rotorflight Discord chat.

Changes Since Version 2.2.1

• Model page
  • Added support for per model statistics like Total flights and Total time
  • When Set name on TX is used to automatically set the model name on your transmitter, rf2bg will revert to the name you specified on the transmitter when no model is connected (instead of '>Rotorflight').
• rf2bg background script
  • Custom CRSF telemetry sensors can now be deleted and discovered at any time
  • No need to follow a special procedure anymore to get the sensors in the correct order
• Added support for the new Rotorflight governor
• Added partial support for the FlySky PA01
• Updated FLYROTOR ESC parameters
• Improved touch UI support
• Reduced memory usage
• Various minor fixes

Rotorflight Lua Scripts - Release 2.2.1

This is a maintenance release containing minor bug fixes.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

Rotorflight setup instructions can be found on the Rotorflight website www.rotorflight.org.

Changes from 2.2.0

• Added touch UI support for EdgeTX 2.11+. Use the SYS key to bring up the Save menu.
• Improved support for FLYROTOR ESC
• Various minor fixes

Rotorflight Lua Scripts - Release 2.2.0

This is the 2.2.0 release of the Rotorflight Lua Scripts for EdgeTX and OpenTX.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

Rotorflight setup instructions can be found on the Rotorflight website www.rotorflight.org.

rf2bg

The rf2bg background script will do a couple of things:

• Set the clock on the flight controller, so your log files have the correct timestamp.
• Enable CRSF/ELRS custom telemetry, if the model is configured to use that.
• Optionally tell you what adjustment you just made, if any.

If you want to use any of these features, make sure you've defined and enabled a special function running rf2bg, with Repeat set to On.

Changes from 2.1.1

• Added page Rate Dynamics
• Added page PID Controller Settings
• Added new RF 2.2 settings to existing pages
• Added units to most settings
• Better support for EdgeTX 2.11
• Reduced memory usage
• Various minor fixes

Rotorflight Lua Scripts - Release Candidate 2.2.0-RC5

This is the Fifth Release Candidate of the Rotorflight Lua Scripts for EdgeTX and OpenTX for RF 2.2.0.

NOTE: The final 2.2.0 version will be released after a few release candidates. Please don't use RCs once the final release is out.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

Rotorflight setup instructions can be found on the Rotorflight website www.rotorflight.org.

rf2bg

The rf2bg background script will do a couple of things:

• Set the clock on the flight controller, so your log files have the correct timestamp.
• Enable CRSF/ELRS custom telemetry, if the model is configured to use that.
• Tell you what adjustment you just made, if any.

If you want to use any of these features, make sure you've defined and enabled a special function running rf2bg, with Repeat set to On.

Changes from 2.1.1

• Added page Rate Dynamics
• Added page PID Controller Settings
• Added new RF 2.2 settings to existing pages
• Added units to most settings
• Better support for EdgeTX 2.11
• Reduced memory usage
• Various minor fixes

Rotorflight Lua Scripts - Release Candidate 2.2.0-RC4

This is the Fourth Release Candidate of the Rotorflight Lua Scripts for EdgeTX and OpenTX for RF 2.2.0.

NOTE: The final 2.2.0 version will be released after a few release candidates. Please don't use RCs once the final release is out.

Downloads

The download locations are:

• Rotorflight Configurator
• Rotorflight Blackbox
• Lua Scripts for EdgeTX and OpenTX
• Lua Scripts for FrSky Ethos
• Lua Suite for FrSky Ethos

Notes

Rotorflight setup instructions can be found on the Rotorflight website www.rotorflight.org.

rf2bg

The rf2bg background script will do a couple of things:

• Set the clock on the flight controller, so your log files have the correct timestamp.
• Enable CRSF/ELRS custom telemetry, if the model is configured to use that.
• Tell you what adjustment you just made, if any.

If you want to use any of these features, make sure you've defined and enabled a special function running rf2bg, with Repeat set to On.

Changes from 2.1.0

• Added page Rate Dynamics
• Added page PID Controller Settings
• Added new RF 2.2 settings to existing pages
• Added units to most settings
• Reduced memory usage
• Various minor fixes