Update clippy by JohnTitor · Pull Request #64871 · rust-lang/rust

JohnTitor · 2019-09-28T11:54:59Z

Closes #64867
CC rust-lang/rust-clippy#4594

r? @oli-obk @Manishearth

rust-highfive · 2019-09-28T11:55:10Z

⚠️ Warning ⚠️

These commits modify submodules.

oli-obk · 2019-09-28T12:06:39Z

@bors r+ p=1

bors · 2019-09-28T12:06:40Z

📌 Commit 7f8248726debad62d02cabdec5557b3ff595dddd has been approved by oli-obk

bors · 2019-09-28T19:46:33Z

⌛ Testing commit 7f8248726debad62d02cabdec5557b3ff595dddd with merge fc6384337fd0707009950b7ab0bd14e8dad6fa18...

rust-highfive · 2019-09-28T22:42:46Z

The job x86_64-gnu-tools of your PR failed (pretty log, raw log). Through arcane magic we have determined that the following fragments from the build log may contain information about the problem.

Click to expand the log.

2019-09-28T21:57:29.5570739Z    |
2019-09-28T21:57:29.5570809Z    = note: `#[deny(const_err)]` on by default
2019-09-28T21:57:29.5570860Z 
2019-09-28T21:57:29.5571153Z thread 'rustc' panicked at 'assertion failed: `(left == right)`
2019-09-28T21:57:29.5571257Z   left: `Size { raw: 0 }`,
2019-09-28T21:57:29.5571589Z  right: `Size { raw: 1 }`: Size mismatch when writing bits', src/librustc_mir/interpret/place.rs:736:21
2019-09-28T21:57:29.5571794Z 
2019-09-28T21:57:29.5571884Z error: internal compiler error: unexpected panic
2019-09-28T21:57:29.5571934Z 
2019-09-28T21:57:29.5572025Z note: the compiler unexpectedly panicked. this is a bug.
---
2019-09-28T21:57:29.5581632Z -LL |     &empty[1..5];
2019-09-28T21:57:29.5581846Z -   |            ^
2019-09-28T21:57:29.5582197Z -   |
2019-09-28T21:57:29.5582521Z -   = note: `-D clippy::out-of-bounds-indexing` implied by `-D warnings`
2019-09-28T21:57:29.5582843Z +thread 'rustc' panicked at 'assertion failed: `(left == right)`
2019-09-28T21:57:29.5582945Z +  left: `Size { raw: 0 }`,
2019-09-28T21:57:29.5583391Z + right: `Size { raw: 1 }`: Size mismatch when writing bits', src/librustc_mir/interpret/place.rs:736:21
2019-09-28T21:57:29.5583502Z +note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace.
2019-09-28T21:57:29.5583781Z -error: range is out of bounds
2019-09-28T21:57:29.5583976Z -  --> $DIR/empty_array.rs:8:16
2019-09-28T21:57:29.5584167Z -   |
2019-09-28T21:57:29.5584349Z -LL |     &empty[0..=4];
---
2019-09-28T21:57:29.5588996Z -  --> $DIR/empty_array.rs:12:16
2019-09-28T21:57:29.5589168Z -   |
2019-09-28T21:57:29.5589782Z -LL |     &empty[0..=0];
2019-09-28T21:57:29.5590013Z -   |                ^
2019-09-28T21:57:29.5590293Z +note: compiler flags: -Z ui-testing -C prefer-dynamic
2019-09-28T21:57:29.5590606Z -error: range is out of bounds
2019-09-28T21:57:29.5591299Z -  --> $DIR/empty_array.rs:13:15
2019-09-28T21:57:29.5591681Z -   |
2019-09-28T21:57:29.5591925Z -LL |     &empty[..=0];
---
2019-09-28T21:57:29.5594565Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'out_of_bounds_indexing/empty_array.rs'
2019-09-28T21:57:29.5594669Z 
2019-09-28T21:57:29.5594749Z error: 1 errors occurred comparing output.
2019-09-28T21:57:29.5594818Z status: exit code: 101
2019-09-28T21:57:29.5596820Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/out_of_bounds_indexing/empty_array.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/out_of_bounds_indexing/empty_array.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/out_of_bounds_indexing/empty_array.stage-id.aux" "-A" "unused"
2019-09-28T21:57:29.5598254Z ------------------------------------------
2019-09-28T21:57:29.5598300Z 
2019-09-28T21:57:29.5598519Z ------------------------------------------
2019-09-28T21:57:29.5598597Z stderr:
2019-09-28T21:57:29.5598597Z stderr:
2019-09-28T21:57:29.5598791Z ------------------------------------------
2019-09-28T21:57:29.5600561Z {"message":"index out of bounds: the len is 0 but the index is 0","code":{"code":"const_err","explanation":null},"level":"error","spans":[{"file_name":"tests/ui/out_of_bounds_indexing/empty_array.rs","byte_start":147,"byte_end":155,"line_start":6,"line_end":6,"column_start":5,"column_end":13,"is_primary":true,"text":[{"text":"    empty[0];","highlight_start":5,"highlight_end":13}],"label":null,"suggested_replacement":null,"suggestion_applicability":null,"expansion":null}],"children":[{"message":"`#[deny(const_err)]` on by default","code":null,"level":"note","spans":[],"children":[],"rendered":null}],"rendered":"error: index out of bounds: the len is 0 but the index is 0\n  --> tests/ui/out_of_bounds_indexing/empty_array.rs:6:5\n   |\nLL |     empty[0];\n   |     ^^^^^^^^\n   |\n   = note: `#[deny(const_err)]` on by default\n\n"}
2019-09-28T21:57:29.5601219Z thread 'rustc' panicked at 'assertion failed: `(left == right)`
2019-09-28T21:57:29.5601330Z   left: `Size { raw: 0 }`,
2019-09-28T21:57:29.5601682Z  right: `Size { raw: 1 }`: Size mismatch when writing bits', src/librustc_mir/interpret/place.rs:736:21
2019-09-28T21:57:29.5601889Z 
2019-09-28T21:57:29.5601980Z error: internal compiler error: unexpected panic
2019-09-28T21:57:29.5602034Z 
2019-09-28T21:57:29.5602127Z note: the compiler unexpectedly panicked. this is a bug.
---
2019-09-28T22:40:08.9505848Z Verifying status of rustfmt...
2019-09-28T22:40:08.9518525Z Verifying status of clippy-driver...
2019-09-28T22:40:08.9531352Z This PR updated 'src/tools/clippy', verifying if status is 'test-pass'...
2019-09-28T22:40:08.9541703Z 
2019-09-28T22:40:08.9542336Z ⚠️ We detected that this PR updated 'clippy-driver', but its tests failed.
2019-09-28T22:40:08.9542569Z 
2019-09-28T22:40:08.9543076Z If you do intend to update 'clippy-driver', please check the error messages above and
2019-09-28T22:40:08.9543165Z commit another update.
2019-09-28T22:40:08.9543224Z 
2019-09-28T22:40:08.9543501Z If you do NOT intend to update 'clippy-driver', please ensure you did not accidentally
2019-09-28T22:40:08.9544048Z change the submodule at 'src/tools/clippy'. You may ask your reviewer for the
2019-09-28T22:40:08.9544129Z proper steps.
2019-09-28T22:40:08.9568588Z   local time: Sat Sep 28 22:40:08 UTC 2019
2019-09-28T22:40:09.1213881Z   network time: Sat, 28 Sep 2019 22:40:09 GMT
2019-09-28T22:40:09.1215167Z == end clock drift check ==
2019-09-28T22:40:09.1215167Z == end clock drift check ==
2019-09-28T22:40:10.3651480Z ##[error]Bash exited with code '3'.
2019-09-28T22:40:10.3695288Z ##[section]Starting: Upload CPU usage statistics
2019-09-28T22:40:10.3708446Z ==============================================================================
2019-09-28T22:40:10.3708562Z Task         : Bash
2019-09-28T22:40:10.3708636Z Description  : Run a Bash script on macOS, Linux, or Windows

I'm a bot! I can only do what humans tell me to, so if this was not helpful or you have suggestions for improvements, please ping or otherwise contact @TimNN. (Feature Requests)

bors · 2019-09-28T22:42:54Z

💔 Test failed - checks-azure

JohnTitor · 2019-09-29T05:48:18Z

Hmm, it seems needed more fix, unrelated clippy?

JohnTitor · 2019-09-29T20:07:06Z

#64900 overrides this so I'm going to close.

JohnTitor · 2019-09-29T20:15:47Z

Ah, it doesn't resolve the problem so I re-open this.

JohnTitor · 2019-09-29T20:34:30Z

@oli-obk This output is from the log:

failures:

---- [ui] ui/out_of_bounds_indexing/empty_array.rs stdout ----
normalized stderr:
error: index out of bounds: the len is 0 but the index is 0
  --> $DIR/empty_array.rs:6:5
   |
LL |     empty[0];
   |     ^^^^^^^^
   |
   = note: `#[deny(const_err)]` on by default

thread 'rustc' panicked at 'assertion failed: `(left == right)`
  left: `Size { raw: 0 }`,
 right: `Size { raw: 1 }`: Size mismatch when writing bits', src/librustc_mir/interpret/place.rs:736:21
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace.

error: internal compiler error: unexpected panic

note: the compiler unexpectedly panicked. this is a bug.

note: we would appreciate a bug report: ***/blob/master/CONTRIBUTING.md#bug-reports

note: rustc 1.40.0-dev running on x86_64-unknown-linux-gnu

note: compiler flags: -Z ui-testing -C prefer-dynamic

error: aborting due to previous error

An ICE is unrelated to clippy?

rust-highfive · 2019-09-29T22:53:01Z

The job LinuxTools of your PR failed (pretty log, raw log). Through arcane magic we have determined that the following fragments from the build log may contain information about the problem.

Click to expand the log.

2019-09-29T20:16:22.2962973Z ##[command]git remote add origin https://github.com/rust-lang/rust
2019-09-29T20:16:22.3142882Z ##[command]git config gc.auto 0
2019-09-29T20:16:22.3224894Z ##[command]git config --get-all http.https://github.com/rust-lang/rust.extraheader
2019-09-29T20:16:22.3284506Z ##[command]git config --get-all http.proxy
2019-09-29T20:16:22.3423943Z ##[command]git -c http.extraheader="AUTHORIZATION: basic ***" fetch --force --tags --prune --progress --no-recurse-submodules --depth=2 origin +refs/heads/*:refs/remotes/origin/* +refs/pull/64871/merge:refs/remotes/pull/64871/merge
---
2019-09-29T22:06:31.6499142Z    Compiling mdbook-linkcheck v0.3.0
2019-09-29T22:06:46.3960515Z    Compiling rustbook v0.1.0 (/checkout/src/tools/rustbook)
2019-09-29T22:06:50.9221732Z     Finished release [optimized] target(s) in 8m 41s
2019-09-29T22:08:30.8909946Z Error: there are broken links
2019-09-29T22:08:30.8912774Z  Caused By: "***/tree/master/src/libsyntax/ext/tt" returned 404 Not Found
2019-09-29T22:08:30.8921970Z  Caused By: "https://doc.rust-lang.org/nightly/nightly-rustc/syntax/ext/tt/macro_parser/fn.parse.html" returned 404 Not Found
2019-09-29T22:08:30.8922658Z  Caused By: "https://doc.rust-lang.org/nightly/nightly-rustc/syntax/ext/tt/macro_rules/" returned 404 Not Found
2019-09-29T22:08:30.8922988Z  Caused By: "https://doc.rust-lang.org/nightly/nightly-rustc/syntax/ext/tt/macro_parser/" returned 404 Not Found
2019-09-29T22:08:30.8923261Z  Caused By: "https://rust-lang.github.io/chalk/doc/chalk_engine/forest/struct.Forest.html" returned 404 Not Found
---
2019-09-29T22:52:53.7007064Z Verifying status of rustfmt...
2019-09-29T22:52:53.7022886Z Verifying status of clippy-driver...
2019-09-29T22:52:53.7039379Z This PR updated 'src/tools/clippy', verifying if status is 'test-pass'...
2019-09-29T22:52:53.7051594Z 
2019-09-29T22:52:53.7052495Z ⚠️ We detected that this PR updated 'clippy-driver', but its tests failed.
2019-09-29T22:52:53.7052573Z 
2019-09-29T22:52:53.7052915Z If you do intend to update 'clippy-driver', please check the error messages above and
2019-09-29T22:52:53.7052978Z commit another update.
2019-09-29T22:52:53.7053011Z 
2019-09-29T22:52:53.7053341Z If you do NOT intend to update 'clippy-driver', please ensure you did not accidentally
2019-09-29T22:52:53.7053652Z change the submodule at 'src/tools/clippy'. You may ask your reviewer for the
2019-09-29T22:52:53.7053709Z proper steps.
2019-09-29T22:52:53.7100155Z   local time: Sun Sep 29 22:52:53 UTC 2019
2019-09-29T22:52:53.8863891Z   network time: Sun, 29 Sep 2019 22:52:53 GMT
2019-09-29T22:52:53.8870125Z == end clock drift check ==
2019-09-29T22:52:53.8870125Z == end clock drift check ==
2019-09-29T22:52:55.4233596Z ##[error]Bash exited with code '3'.
2019-09-29T22:52:55.4291883Z ##[section]Starting: Checkout
2019-09-29T22:52:55.4294304Z ==============================================================================
2019-09-29T22:52:55.4294370Z Task         : Get sources
2019-09-29T22:52:55.4294422Z Description  : Get sources from a repository. Supports Git, TfsVC, and SVN repositories.

I'm a bot! I can only do what humans tell me to, so if this was not helpful or you have suggestions for improvements, please ping or otherwise contact @TimNN. (Feature Requests)

rust-highfive · 2019-09-30T02:00:54Z

The job LinuxTools of your PR failed (pretty log, raw log). Through arcane magic we have determined that the following fragments from the build log may contain information about the problem.

Click to expand the log.

2019-09-29T23:06:00.4190857Z ##[command]git remote add origin https://github.com/rust-lang/rust
2019-09-29T23:06:00.4413802Z ##[command]git config gc.auto 0
2019-09-29T23:06:00.4511187Z ##[command]git config --get-all http.https://github.com/rust-lang/rust.extraheader
2019-09-29T23:06:00.4572006Z ##[command]git config --get-all http.proxy
2019-09-29T23:06:00.4738079Z ##[command]git -c http.extraheader="AUTHORIZATION: basic ***" fetch --force --tags --prune --progress --no-recurse-submodules --depth=2 origin +refs/heads/*:refs/remotes/origin/* +refs/pull/64871/merge:refs/remotes/pull/64871/merge
---
2019-09-30T00:56:59.3327312Z    Compiling mdbook-linkcheck v0.3.0
2019-09-30T00:57:12.8218552Z    Compiling rustbook v0.1.0 (/checkout/src/tools/rustbook)
2019-09-30T00:57:17.3893027Z     Finished release [optimized] target(s) in 8m 35s
2019-09-30T00:59:23.9164085Z Error: there are broken links
2019-09-30T00:59:23.9166215Z  Caused By: There was an error while fetching "https://ci.appveyor.com/project/rust-lang/rust", https://ci.appveyor.com/project/rust-lang/rust: timed out
2019-09-30T00:59:23.9167108Z  Caused By: "***/tree/master/src/libsyntax/ext/tt" returned 404 Not Found
2019-09-30T00:59:23.9168300Z  Caused By: "https://doc.rust-lang.org/nightly/nightly-rustc/syntax/ext/tt/macro_parser/fn.parse.html" returned 404 Not Found
2019-09-30T00:59:23.9168830Z  Caused By: "https://doc.rust-lang.org/nightly/nightly-rustc/syntax/ext/tt/macro_rules/" returned 404 Not Found
2019-09-30T00:59:23.9169790Z  Caused By: "https://doc.rust-lang.org/nightly/nightly-rustc/syntax/ext/tt/macro_parser/" returned 404 Not Found
2019-09-30T00:59:23.9170844Z  Caused By: "https://rust-lang.github.io/chalk/doc/chalk_engine/forest/struct.Forest.html" returned 404 Not Found
---
2019-09-30T01:17:52.1758471Z normalized stderr:
2019-09-30T01:17:52.1758499Z 
2019-09-30T01:17:52.1758524Z 
2019-09-30T01:17:52.1758581Z expected stderr:
2019-09-30T01:17:52.1758625Z error: the variable `_index` is used as a loop counter.
2019-09-30T01:17:52.1758899Z    |
2019-09-30T01:17:52.1758899Z    |
2019-09-30T01:17:52.1758956Z LL |     for _v in &vec {
2019-09-30T01:17:52.1759041Z    |               ^^^^ help: consider using: `for (_index, _v) in (&vec).enumerate()`
2019-09-30T01:17:52.1759332Z    = note: `-D clippy::explicit-counter-loop` implied by `-D warnings`
2019-09-30T01:17:52.1759366Z 
2019-09-30T01:17:52.1759366Z 
2019-09-30T01:17:52.1759420Z error: the variable `_index` is used as a loop counter.
2019-09-30T01:17:52.1759681Z    |
2019-09-30T01:17:52.1759681Z    |
2019-09-30T01:17:52.1759721Z LL |     for _v in &vec {
2019-09-30T01:17:52.1759767Z    |               ^^^^ help: consider using: `for (_index, _v) in (&vec).enumerate()`
2019-09-30T01:17:52.1759812Z 
2019-09-30T01:17:52.1759852Z error: the variable `count` is used as a loop counter.
2019-09-30T01:17:52.1760111Z    |
2019-09-30T01:17:52.1760111Z    |
2019-09-30T01:17:52.1760152Z LL |         for ch in text.chars() {
2019-09-30T01:17:52.1760201Z    |                   ^^^^^^^^^^^^ help: consider using: `for (count, ch) in text.chars().enumerate()`
2019-09-30T01:17:52.1760245Z 
2019-09-30T01:17:52.1760307Z error: the variable `count` is used as a loop counter.
2019-09-30T01:17:52.1760555Z    |
2019-09-30T01:17:52.1760555Z    |
2019-09-30T01:17:52.1760619Z LL |         for ch in text.chars() {
2019-09-30T01:17:52.1760669Z    |                   ^^^^^^^^^^^^ help: consider using: `for (count, ch) in text.chars().enumerate()`
2019-09-30T01:17:52.1760700Z 
2019-09-30T01:17:52.1760741Z error: the variable `count` is used as a loop counter.
2019-09-30T01:17:52.1761000Z    |
2019-09-30T01:17:52.1761038Z LL |         for _i in 3..10 {
2019-09-30T01:17:52.1761038Z LL |         for _i in 3..10 {
2019-09-30T01:17:52.1761101Z    |                   ^^^^^ help: consider using: `for (count, _i) in (3..10).enumerate()`
2019-09-30T01:17:52.1761172Z error: aborting due to 5 previous errors
2019-09-30T01:17:52.1761198Z 
2019-09-30T01:17:52.1761248Z 
2019-09-30T01:17:52.1761271Z 
2019-09-30T01:17:52.1761271Z 
2019-09-30T01:17:52.1761308Z diff of stderr:
2019-09-30T01:17:52.1761333Z 
2019-09-30T01:17:52.1761560Z -error: the variable `_index` is used as a loop counter.
2019-09-30T01:17:52.1761925Z -   |
2019-09-30T01:17:52.1761925Z -   |
2019-09-30T01:17:52.1762931Z -LL |     for _v in &vec {
2019-09-30T01:17:52.1763429Z -   |               ^^^^ help: consider using: `for (_index, _v) in (&vec).enumerate()`
2019-09-30T01:17:52.1763847Z -   = note: `-D clippy::explicit-counter-loop` implied by `-D warnings`
2019-09-30T01:17:52.1764040Z -
2019-09-30T01:17:52.1764040Z -
2019-09-30T01:17:52.1764259Z -error: the variable `_index` is used as a loop counter.
2019-09-30T01:17:52.1765028Z -   |
2019-09-30T01:17:52.1765028Z -   |
2019-09-30T01:17:52.1765225Z -LL |     for _v in &vec {
2019-09-30T01:17:52.1765474Z -   |               ^^^^ help: consider using: `for (_index, _v) in (&vec).enumerate()`
2019-09-30T01:17:52.1765998Z -
2019-09-30T01:17:52.1766226Z -error: the variable `count` is used as a loop counter.
2019-09-30T01:17:52.1766585Z -   |
2019-09-30T01:17:52.1766585Z -   |
2019-09-30T01:17:52.1766796Z -LL |         for ch in text.chars() {
2019-09-30T01:17:52.1767060Z -   |                   ^^^^^^^^^^^^ help: consider using: `for (count, ch) in text.chars().enumerate()`
2019-09-30T01:17:52.1767225Z -
2019-09-30T01:17:52.1767446Z -error: the variable `count` is used as a loop counter.
2019-09-30T01:17:52.1767866Z -   |
2019-09-30T01:17:52.1767866Z -   |
2019-09-30T01:17:52.1768091Z -LL |         for ch in text.chars() {
2019-09-30T01:17:52.1768360Z -   |                   ^^^^^^^^^^^^ help: consider using: `for (count, ch) in text.chars().enumerate()`
2019-09-30T01:17:52.1768540Z -
2019-09-30T01:17:52.1768776Z -error: the variable `count` is used as a loop counter.
2019-09-30T01:17:52.1769187Z -   |
2019-09-30T01:17:52.1769391Z -LL |         for _i in 3..10 {
2019-09-30T01:17:52.1769391Z -LL |         for _i in 3..10 {
2019-09-30T01:17:52.1769668Z -   |                   ^^^^^ help: consider using: `for (count, _i) in (3..10).enumerate()`
2019-09-30T01:17:52.1770062Z -error: aborting due to 5 previous errors
2019-09-30T01:17:52.1770256Z -
2019-09-30T01:17:52.1770419Z -
2019-09-30T01:17:52.1770447Z 
2019-09-30T01:17:52.1770447Z 
2019-09-30T01:17:52.1770611Z The actual stderr differed from the expected stderr.
2019-09-30T01:17:52.1771109Z Actual stderr saved to /checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/explicit_counter_loop.stderr
2019-09-30T01:17:52.1771177Z To update references, run this command from build directory:
2019-09-30T01:17:52.1771571Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'explicit_counter_loop.rs'
2019-09-30T01:17:52.1771625Z 
2019-09-30T01:17:52.1771670Z error: 1 errors occurred comparing output.
2019-09-30T01:17:52.1771714Z status: exit code: 0
2019-09-30T01:17:52.1773685Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/explicit_counter_loop.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/explicit_counter_loop.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/explicit_counter_loop.stage-id.aux" "-A" "unused"
2019-09-30T01:17:52.1774205Z ------------------------------------------
2019-09-30T01:17:52.1774240Z 
2019-09-30T01:17:52.1774456Z ------------------------------------------
2019-09-30T01:17:52.1774501Z stderr:
---
2019-09-30T01:17:52.1775382Z normalized stderr:
2019-09-30T01:17:52.1775410Z 
2019-09-30T01:17:52.1775435Z 
2019-09-30T01:17:52.1775495Z expected stderr:
2019-09-30T01:17:52.1776292Z error: you seem to want to iterate on a map's values
2019-09-30T01:17:52.1776591Z    |
2019-09-30T01:17:52.1776591Z    |
2019-09-30T01:17:52.1776645Z LL |     for (_, v) in &m {
2019-09-30T01:17:52.1776739Z    |
2019-09-30T01:17:52.1776739Z    |
2019-09-30T01:17:52.1776955Z    = note: `-D clippy::for-kv-map` implied by `-D warnings`
2019-09-30T01:17:52.1777064Z    |
2019-09-30T01:17:52.1777064Z    |
2019-09-30T01:17:52.1777103Z LL |     for v in m.values() {
2019-09-30T01:17:52.1777171Z 
2019-09-30T01:17:52.1777171Z 
2019-09-30T01:17:52.1777396Z error: you seem to want to iterate on a map's values
2019-09-30T01:17:52.1777628Z    |
2019-09-30T01:17:52.1777628Z    |
2019-09-30T01:17:52.1777666Z LL |     for (_, v) in &*m {
2019-09-30T01:17:52.1777773Z help: use the corresponding method
2019-09-30T01:17:52.1777812Z    |
2019-09-30T01:17:52.1777812Z    |
2019-09-30T01:17:52.1778051Z LL |     for v in (*m).values() {
2019-09-30T01:17:52.1778163Z 
2019-09-30T01:17:52.1778163Z 
2019-09-30T01:17:52.1778463Z error: you seem to want to iterate on a map's values
2019-09-30T01:17:52.1778732Z    |
2019-09-30T01:17:52.1778732Z    |
2019-09-30T01:17:52.1778770Z LL |     for (_, v) in &mut m {
2019-09-30T01:17:52.1778869Z help: use the corresponding method
2019-09-30T01:17:52.1778906Z    |
2019-09-30T01:17:52.1778906Z    |
2019-09-30T01:17:52.1778961Z LL |     for v in m.values_mut() {
2019-09-30T01:17:52.1779029Z 
2019-09-30T01:17:52.1779029Z 
2019-09-30T01:17:52.1779234Z error: you seem to want to iterate on a map's values
2019-09-30T01:17:52.1779489Z    |
2019-09-30T01:17:52.1779489Z    |
2019-09-30T01:17:52.1779527Z LL |     for (_, v) in &mut *m {
2019-09-30T01:17:52.1779624Z help: use the corresponding method
2019-09-30T01:17:52.1779663Z    |
2019-09-30T01:17:52.1779663Z    |
2019-09-30T01:17:52.1779702Z LL |     for v in (*m).values_mut() {
2019-09-30T01:17:52.1779793Z 
2019-09-30T01:17:52.1779793Z 
2019-09-30T01:17:52.1779999Z error: you seem to want to iterate on a map's keys
2019-09-30T01:17:52.1780245Z    |
2019-09-30T01:17:52.1780245Z    |
2019-09-30T01:17:52.1780283Z LL |     for (k, _value) in rm {
2019-09-30T01:17:52.1780381Z help: use the corresponding method
2019-09-30T01:17:52.1780418Z    |
2019-09-30T01:17:52.1780418Z    |
2019-09-30T01:17:52.1780494Z LL |     for k in rm.keys() {
2019-09-30T01:17:52.1780577Z 
2019-09-30T01:17:52.1780617Z error: aborting due to 5 previous errors
2019-09-30T01:17:52.1780651Z 
2019-09-30T01:17:52.1780675Z 
2019-09-30T01:17:52.1780675Z 
2019-09-30T01:17:52.1780714Z 
2019-09-30T01:17:52.1780751Z diff of stderr:
2019-09-30T01:17:52.1780777Z 
2019-09-30T01:17:52.1780995Z -error: you seem to want to iterate on a map's values
2019-09-30T01:17:52.1781493Z -   |
2019-09-30T01:17:52.1781493Z -   |
2019-09-30T01:17:52.1781720Z -LL |     for (_, v) in &m {
2019-09-30T01:17:52.1782086Z -   |
2019-09-30T01:17:52.1782086Z -   |
2019-09-30T01:17:52.1782296Z -   = note: `-D clippy::for-kv-map` implied by `-D warnings`
2019-09-30T01:17:52.1783088Z -   |
2019-09-30T01:17:52.1783088Z -   |
2019-09-30T01:17:52.1783286Z -LL |     for v in m.values() {
2019-09-30T01:17:52.1783672Z -
2019-09-30T01:17:52.1783672Z -
2019-09-30T01:17:52.1783888Z -error: you seem to want to iterate on a map's values
2019-09-30T01:17:52.1784286Z -   |
2019-09-30T01:17:52.1784286Z -   |
2019-09-30T01:17:52.1784483Z -LL |     for (_, v) in &*m {
2019-09-30T01:17:52.1785050Z -help: use the corresponding method
2019-09-30T01:17:52.1785267Z -   |
2019-09-30T01:17:52.1785267Z -   |
2019-09-30T01:17:52.1785487Z -LL |     for v in (*m).values() {
2019-09-30T01:17:52.1786037Z -
2019-09-30T01:17:52.1786037Z -
2019-09-30T01:17:52.1786243Z -error: you seem to want to iterate on a map's values
2019-09-30T01:17:52.1786616Z -   |
2019-09-30T01:17:52.1786616Z -   |
2019-09-30T01:17:52.1786802Z -LL |     for (_, v) in &mut m {
2019-09-30T01:17:52.1787175Z -help: use the corresponding method
2019-09-30T01:17:52.1787357Z -   |
2019-09-30T01:17:52.1787357Z -   |
2019-09-30T01:17:52.1787544Z -LL |     for v in m.values_mut() {
2019-09-30T01:17:52.1787908Z -
2019-09-30T01:17:52.1787908Z -
2019-09-30T01:17:52.1788109Z -error: you seem to want to iterate on a map's values
2019-09-30T01:17:52.1788485Z -   |
2019-09-30T01:17:52.1788485Z -   |
2019-09-30T01:17:52.1788671Z -LL |     for (_, v) in &mut *m {
2019-09-30T01:17:52.1789171Z -help: use the corresponding method
2019-09-30T01:17:52.1792873Z -   |
2019-09-30T01:17:52.1792873Z -   |
2019-09-30T01:17:52.1793158Z -LL |     for v in (*m).values_mut() {
2019-09-30T01:17:52.1793559Z -
2019-09-30T01:17:52.1793559Z -
2019-09-30T01:17:52.1793778Z -error: you seem to want to iterate on a map's keys
2019-09-30T01:17:52.1794174Z -   |
2019-09-30T01:17:52.1794174Z -   |
2019-09-30T01:17:52.1794375Z -LL |     for (k, _value) in rm {
2019-09-30T01:17:52.1794774Z -help: use the corresponding method
2019-09-30T01:17:52.1794984Z -   |
2019-09-30T01:17:52.1794984Z -   |
2019-09-30T01:17:52.1795199Z -LL |     for k in rm.keys() {
2019-09-30T01:17:52.1795620Z -
2019-09-30T01:17:52.1795850Z -error: aborting due to 5 previous errors
2019-09-30T01:17:52.1796158Z -
2019-09-30T01:17:52.1796314Z -
---
2019-09-30T01:17:52.1797176Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'for_kv_map.rs'
2019-09-30T01:17:52.1797218Z 
2019-09-30T01:17:52.1797277Z error: 1 errors occurred comparing output.
2019-09-30T01:17:52.1797319Z status: exit code: 0
2019-09-30T01:17:52.1798803Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/for_kv_map.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/for_kv_map.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/for_kv_map.stage-id.aux" "-A" "unused"
2019-09-30T01:17:52.1799297Z ------------------------------------------
2019-09-30T01:17:52.1799329Z 
2019-09-30T01:17:52.1799556Z ------------------------------------------
2019-09-30T01:17:52.1799598Z stderr:
---
2019-09-30T01:17:52.1826473Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'for_loop_over_option_result.rs'
2019-09-30T01:17:52.1826552Z 
2019-09-30T01:17:52.1826595Z error: 1 errors occurred comparing output.
2019-09-30T01:17:52.1826635Z status: exit code: 1
2019-09-30T01:17:52.1828025Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/for_loop_over_option_result.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/for_loop_over_option_result.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/for_loop_over_option_result.stage-id.aux" "-A" "unused"
2019-09-30T01:17:52.1828427Z ------------------------------------------
2019-09-30T01:17:52.1828474Z 
2019-09-30T01:17:52.1828672Z ------------------------------------------
2019-09-30T01:17:52.1828713Z stderr:
---
2019-09-30T01:17:52.1832966Z normalized stderr:
2019-09-30T01:17:52.1832994Z 
2019-09-30T01:17:52.1833020Z 
2019-09-30T01:17:52.1833079Z expected stderr:
2019-09-30T01:17:52.1833125Z error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1833459Z    |
2019-09-30T01:17:52.1833500Z LL |     for i in 10..0 {
2019-09-30T01:17:52.1833543Z    |              ^^^^^
2019-09-30T01:17:52.1833597Z    |
2019-09-30T01:17:52.1833597Z    |
2019-09-30T01:17:52.1833833Z    = note: `-D clippy::reverse-range-loop` implied by `-D warnings`
2019-09-30T01:17:52.1833899Z help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1833963Z    |
2019-09-30T01:17:52.1834005Z LL |     for i in (0..10).rev() {
2019-09-30T01:17:52.1834079Z 
2019-09-30T01:17:52.1834079Z 
2019-09-30T01:17:52.1834140Z error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1834700Z    |
2019-09-30T01:17:52.1834761Z LL |     for i in 10..=0 {
2019-09-30T01:17:52.1834803Z    |              ^^^^^^
2019-09-30T01:17:52.1834853Z help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1834853Z help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1837570Z    |
2019-09-30T01:17:52.1837657Z LL |     for i in (0..=10).rev() {
2019-09-30T01:17:52.1837729Z 
2019-09-30T01:17:52.1837729Z 
2019-09-30T01:17:52.1837789Z error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1838204Z    |
2019-09-30T01:17:52.1838244Z LL |     for i in MAX_LEN..0 {
2019-09-30T01:17:52.1838420Z    |              ^^^^^^^^^^
2019-09-30T01:17:52.1838471Z help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1838471Z help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1838516Z    |
2019-09-30T01:17:52.1838577Z LL |     for i in (0..MAX_LEN).rev() {
2019-09-30T01:17:52.1838650Z 
2019-09-30T01:17:52.1838650Z 
2019-09-30T01:17:52.1838694Z error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1838982Z    |
2019-09-30T01:17:52.1839032Z LL |     for i in 10..5 + 4 {
2019-09-30T01:17:52.1839093Z    |              ^^^^^^^^^
2019-09-30T01:17:52.1839145Z help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1839145Z help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1839190Z    |
2019-09-30T01:17:52.1839399Z LL |     for i in (5 + 4..10).rev() {
2019-09-30T01:17:52.1839482Z 
2019-09-30T01:17:52.1839482Z 
2019-09-30T01:17:52.1839525Z error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1839836Z    |
2019-09-30T01:17:52.1839836Z    |
2019-09-30T01:17:52.1840040Z LL |     for i in (5 + 2)..(3 - 1) {
2019-09-30T01:17:52.1840157Z help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1840203Z    |
2019-09-30T01:17:52.1840203Z    |
2019-09-30T01:17:52.1840435Z LL |     for i in ((3 - 1)..(5 + 2)).rev() {
2019-09-30T01:17:52.1840617Z 
2019-09-30T01:17:52.1840668Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1840927Z   --> $DIR/for_loop_fixable.rs:98:15
2019-09-30T01:17:52.1840970Z    |
2019-09-30T01:17:52.1840970Z    |
2019-09-30T01:17:52.1841021Z LL |     for _v in vec.iter() {}
2019-09-30T01:17:52.1841089Z    |               ^^^^^^^^^^ help: to write this more concisely, try: `&vec`
2019-09-30T01:17:52.1841370Z    = note: `-D clippy::explicit-iter-loop` implied by `-D warnings`
2019-09-30T01:17:52.1841402Z 
2019-09-30T01:17:52.1841470Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1841685Z   --> $DIR/for_loop_fixable.rs:100:15
2019-09-30T01:17:52.1841685Z   --> $DIR/for_loop_fixable.rs:100:15
2019-09-30T01:17:52.1841729Z    |
2019-09-30T01:17:52.1841788Z LL |     for _v in vec.iter_mut() {}
2019-09-30T01:17:52.1841839Z    |               ^^^^^^^^^^^^^^ help: to write this more concisely, try: `&mut vec`
2019-09-30T01:17:52.1842036Z error: it is more concise to loop over containers instead of using explicit iteration methods`
2019-09-30T01:17:52.1842262Z   --> $DIR/for_loop_fixable.rs:103:15
2019-09-30T01:17:52.1842304Z    |
2019-09-30T01:17:52.1842304Z    |
2019-09-30T01:17:52.1842352Z LL |     for _v in out_vec.into_iter() {}
2019-09-30T01:17:52.1842422Z    |               ^^^^^^^^^^^^^^^^^^^ help: to write this more concisely, try: `out_vec`
2019-09-30T01:17:52.1843216Z    = note: `-D clippy::explicit-into-iter-loop` implied by `-D warnings`
2019-09-30T01:17:52.1843269Z 
2019-09-30T01:17:52.1843321Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1843538Z   --> $DIR/for_loop_fixable.rs:106:15
2019-09-30T01:17:52.1843538Z   --> $DIR/for_loop_fixable.rs:106:15
2019-09-30T01:17:52.1843598Z    |
2019-09-30T01:17:52.1843640Z LL |     for _v in array.into_iter() {}
2019-09-30T01:17:52.1843693Z    |               ^^^^^^^^^^^^^^^^^ help: to write this more concisely, try: `&array`
2019-09-30T01:17:52.1843803Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1844019Z   --> $DIR/for_loop_fixable.rs:111:15
2019-09-30T01:17:52.1844062Z    |
2019-09-30T01:17:52.1844062Z    |
2019-09-30T01:17:52.1844127Z LL |     for _v in [1, 2, 3].iter() {}
2019-09-30T01:17:52.1844180Z    |               ^^^^^^^^^^^^^^^^ help: to write this more concisely, try: `&[1, 2, 3]`
2019-09-30T01:17:52.1844262Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1844495Z   --> $DIR/for_loop_fixable.rs:115:15
2019-09-30T01:17:52.1844539Z    |
2019-09-30T01:17:52.1844539Z    |
2019-09-30T01:17:52.1844580Z LL |     for _v in [0; 32].iter() {}
2019-09-30T01:17:52.1844649Z    |               ^^^^^^^^^^^^^^ help: to write this more concisely, try: `&[0; 32]`
2019-09-30T01:17:52.1844730Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1844971Z   --> $DIR/for_loop_fixable.rs:120:15
2019-09-30T01:17:52.1845016Z    |
2019-09-30T01:17:52.1845016Z    |
2019-09-30T01:17:52.1845057Z LL |     for _v in ll.iter() {}
2019-09-30T01:17:52.1845240Z    |               ^^^^^^^^^ help: to write this more concisely, try: `&ll`
2019-09-30T01:17:52.1845357Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1845639Z   --> $DIR/for_loop_fixable.rs:123:15
2019-09-30T01:17:52.1845703Z    |
2019-09-30T01:17:52.1845703Z    |
2019-09-30T01:17:52.1845747Z LL |     for _v in vd.iter() {}
2019-09-30T01:17:52.1845799Z    |               ^^^^^^^^^ help: to write this more concisely, try: `&vd`
2019-09-30T01:17:52.1845901Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1846221Z   --> $DIR/for_loop_fixable.rs:126:15
2019-09-30T01:17:52.1846354Z    |
2019-09-30T01:17:52.1846354Z    |
2019-09-30T01:17:52.1846412Z LL |     for _v in bh.iter() {}
2019-09-30T01:17:52.1846460Z    |               ^^^^^^^^^ help: to write this more concisely, try: `&bh`
2019-09-30T01:17:52.1846544Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1846798Z   --> $DIR/for_loop_fixable.rs:129:15
2019-09-30T01:17:52.1846840Z    |
2019-09-30T01:17:52.1846840Z    |
2019-09-30T01:17:52.1846879Z LL |     for _v in hm.iter() {}
2019-09-30T01:17:52.1846943Z    |               ^^^^^^^^^ help: to write this more concisely, try: `&hm`
2019-09-30T01:17:52.1847025Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1847271Z   --> $DIR/for_loop_fixable.rs:132:15
2019-09-30T01:17:52.1847316Z    |
2019-09-30T01:17:52.1847316Z    |
2019-09-30T01:17:52.1847359Z LL |     for _v in bt.iter() {}
2019-09-30T01:17:52.1847408Z    |               ^^^^^^^^^ help: to write this more concisely, try: `&bt`
2019-09-30T01:17:52.1847516Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1847744Z   --> $DIR/for_loop_fixable.rs:135:15
2019-09-30T01:17:52.1847805Z    |
2019-09-30T01:17:52.1847805Z    |
2019-09-30T01:17:52.1847854Z LL |     for _v in hs.iter() {}
2019-09-30T01:17:52.1847903Z    |               ^^^^^^^^^ help: to write this more concisely, try: `&hs`
2019-09-30T01:17:52.1848001Z error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1848229Z   --> $DIR/for_loop_fixable.rs:138:15
2019-09-30T01:17:52.1848273Z    |
2019-09-30T01:17:52.1848273Z    |
2019-09-30T01:17:52.1848332Z LL |     for _v in bs.iter() {}
2019-09-30T01:17:52.1848382Z    |               ^^^^^^^^^ help: to write this more concisely, try: `&bs`
2019-09-30T01:17:52.1848457Z error: aborting due to 18 previous errors
2019-09-30T01:17:52.1848509Z 
2019-09-30T01:17:52.1848535Z 
2019-09-30T01:17:52.1848560Z 
2019-09-30T01:17:52.1848560Z 
2019-09-30T01:17:52.1848601Z diff of stderr:
2019-09-30T01:17:52.1848645Z 
2019-09-30T01:17:52.1848887Z -error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1853470Z -   |
2019-09-30T01:17:52.1853711Z -LL |     for i in 10..0 {
2019-09-30T01:17:52.1853903Z -   |              ^^^^^
2019-09-30T01:17:52.1854381Z -   |
2019-09-30T01:17:52.1854381Z -   |
2019-09-30T01:17:52.1854688Z -   = note: `-D clippy::reverse-range-loop` implied by `-D warnings`
2019-09-30T01:17:52.1854957Z -help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1855136Z -   |
2019-09-30T01:17:52.1855358Z -LL |     for i in (0..10).rev() {
2019-09-30T01:17:52.1855733Z -
2019-09-30T01:17:52.1855733Z -
2019-09-30T01:17:52.1855955Z -error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1856476Z -   |
2019-09-30T01:17:52.1856664Z -LL |     for i in 10..=0 {
2019-09-30T01:17:52.1856871Z -   |              ^^^^^^
2019-09-30T01:17:52.1857120Z -help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1857120Z -help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1857467Z -   |
2019-09-30T01:17:52.1857739Z -LL |     for i in (0..=10).rev() {
2019-09-30T01:17:52.1858102Z -
2019-09-30T01:17:52.1858102Z -
2019-09-30T01:17:52.1858317Z -error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1858710Z -   |
2019-09-30T01:17:52.1858903Z -LL |     for i in MAX_LEN..0 {
2019-09-30T01:17:52.1859117Z -   |              ^^^^^^^^^^
2019-09-30T01:17:52.1859369Z -help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1859369Z -help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1859543Z -   |
2019-09-30T01:17:52.1859760Z -LL |     for i in (0..MAX_LEN).rev() {
2019-09-30T01:17:52.1860256Z -
2019-09-30T01:17:52.1860256Z -
2019-09-30T01:17:52.1860492Z -error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1860867Z -   |
2019-09-30T01:17:52.1861069Z -LL |     for i in 10..5 + 4 {
2019-09-30T01:17:52.1861282Z -   |              ^^^^^^^^^
2019-09-30T01:17:52.1861530Z -help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1861530Z -help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1861702Z -   |
2019-09-30T01:17:52.1861923Z -LL |     for i in (5 + 4..10).rev() {
2019-09-30T01:17:52.1862284Z -
2019-09-30T01:17:52.1862284Z -
2019-09-30T01:17:52.1862910Z -error: this range is empty so this for loop will never run
2019-09-30T01:17:52.1863332Z -   |
2019-09-30T01:17:52.1863332Z -   |
2019-09-30T01:17:52.1863539Z -LL |     for i in (5 + 2)..(3 - 1) {
2019-09-30T01:17:52.1864045Z -help: consider using the following if you are attempting to iterate over this range in reverse
2019-09-30T01:17:52.1864223Z -   |
2019-09-30T01:17:52.1864223Z -   |
2019-09-30T01:17:52.1864455Z -LL |     for i in ((3 - 1)..(5 + 2)).rev() {
2019-09-30T01:17:52.1864849Z -
2019-09-30T01:17:52.1865131Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1865348Z -  --> $DIR/for_loop_fixable.rs:98:15
2019-09-30T01:17:52.1865524Z -   |
2019-09-30T01:17:52.1865524Z -   |
2019-09-30T01:17:52.1865742Z -LL |     for _v in vec.iter() {}
2019-09-30T01:17:52.1866095Z -   |               ^^^^^^^^^^ help: to write this more concisely, try: `&vec`
2019-09-30T01:17:52.1866493Z -   = note: `-D clippy::explicit-iter-loop` implied by `-D warnings`
2019-09-30T01:17:52.1866680Z -
2019-09-30T01:17:52.1866937Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1867155Z -  --> $DIR/for_loop_fixable.rs:100:15
2019-09-30T01:17:52.1867155Z -  --> $DIR/for_loop_fixable.rs:100:15
2019-09-30T01:17:52.1867343Z -   |
2019-09-30T01:17:52.1867539Z -LL |     for _v in vec.iter_mut() {}
2019-09-30T01:17:52.1867789Z -   |               ^^^^^^^^^^^^^^ help: to write this more concisely, try: `&mut vec`
2019-09-30T01:17:52.1868224Z -error: it is more concise to loop over containers instead of using explicit iteration methods`
2019-09-30T01:17:52.1868428Z -  --> $DIR/for_loop_fixable.rs:103:15
2019-09-30T01:17:52.1868613Z -   |
2019-09-30T01:17:52.1868613Z -   |
2019-09-30T01:17:52.1868815Z -LL |     for _v in out_vec.into_iter() {}
2019-09-30T01:17:52.1869059Z -   |               ^^^^^^^^^^^^^^^^^^^ help: to write this more concisely, try: `out_vec`
2019-09-30T01:17:52.1869477Z -   = note: `-D clippy::explicit-into-iter-loop` implied by `-D warnings`
2019-09-30T01:17:52.1869643Z -
2019-09-30T01:17:52.1869899Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1870133Z -  --> $DIR/for_loop_fixable.rs:106:15
2019-09-30T01:17:52.1870133Z -  --> $DIR/for_loop_fixable.rs:106:15
2019-09-30T01:17:52.1870300Z -   |
2019-09-30T01:17:52.1870497Z -LL |     for _v in array.into_iter() {}
2019-09-30T01:17:52.1870878Z -   |               ^^^^^^^^^^^^^^^^^ help: to write this more concisely, try: `&array`
2019-09-30T01:17:52.1871354Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1871581Z -  --> $DIR/for_loop_fixable.rs:111:15
2019-09-30T01:17:52.1872041Z -   |
2019-09-30T01:17:52.1872041Z -   |
2019-09-30T01:17:52.1872254Z -LL |     for _v in [1, 2, 3].iter() {}
2019-09-30T01:17:52.1872917Z -   |               ^^^^^^^^^^^^^^^^ help: to write this more concisely, try: `&[1, 2, 3]`
2019-09-30T01:17:52.1873410Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1873847Z -  --> $DIR/for_loop_fixable.rs:115:15
2019-09-30T01:17:52.1874073Z -   |
2019-09-30T01:17:52.1874073Z -   |
2019-09-30T01:17:52.1874281Z -LL |     for _v in [0; 32].iter() {}
2019-09-30T01:17:52.1874554Z -   |               ^^^^^^^^^^^^^^ help: to write this more concisely, try: `&[0; 32]`
2019-09-30T01:17:52.1875010Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1875225Z -  --> $DIR/for_loop_fixable.rs:120:15
2019-09-30T01:17:52.1875420Z -   |
2019-09-30T01:17:52.1875420Z -   |
2019-09-30T01:17:52.1875619Z -LL |     for _v in ll.iter() {}
2019-09-30T01:17:52.1875862Z -   |               ^^^^^^^^^ help: to write this more concisely, try: `&ll`
2019-09-30T01:17:52.1876418Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1876624Z -  --> $DIR/for_loop_fixable.rs:123:15
2019-09-30T01:17:52.1876810Z -   |
2019-09-30T01:17:52.1876810Z -   |
2019-09-30T01:17:52.1877001Z -LL |     for _v in vd.iter() {}
2019-09-30T01:17:52.1877242Z -   |               ^^^^^^^^^ help: to write this more concisely, try: `&vd`
2019-09-30T01:17:52.1877684Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1877900Z -  --> $DIR/for_loop_fixable.rs:126:15
2019-09-30T01:17:52.1878087Z -   |
2019-09-30T01:17:52.1878087Z -   |
2019-09-30T01:17:52.1878281Z -LL |     for _v in bh.iter() {}
2019-09-30T01:17:52.1878512Z -   |               ^^^^^^^^^ help: to write this more concisely, try: `&bh`
2019-09-30T01:17:52.1878952Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1879160Z -  --> $DIR/for_loop_fixable.rs:129:15
2019-09-30T01:17:52.1879328Z -   |
2019-09-30T01:17:52.1879328Z -   |
2019-09-30T01:17:52.1879536Z -LL |     for _v in hm.iter() {}
2019-09-30T01:17:52.1879768Z -   |               ^^^^^^^^^ help: to write this more concisely, try: `&hm`
2019-09-30T01:17:52.1880217Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1880424Z -  --> $DIR/for_loop_fixable.rs:132:15
2019-09-30T01:17:52.1880595Z -   |
2019-09-30T01:17:52.1880595Z -   |
2019-09-30T01:17:52.1880812Z -LL |     for _v in bt.iter() {}
2019-09-30T01:17:52.1881047Z -   |               ^^^^^^^^^ help: to write this more concisely, try: `&bt`
2019-09-30T01:17:52.1881593Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1881825Z -  --> $DIR/for_loop_fixable.rs:135:15
2019-09-30T01:17:52.1881999Z -   |
2019-09-30T01:17:52.1881999Z -   |
2019-09-30T01:17:52.1882197Z -LL |     for _v in hs.iter() {}
2019-09-30T01:17:52.1882749Z -   |               ^^^^^^^^^ help: to write this more concisely, try: `&hs`
2019-09-30T01:17:52.1883242Z -error: it is more concise to loop over references to containers instead of using explicit iteration methods
2019-09-30T01:17:52.1883492Z -  --> $DIR/for_loop_fixable.rs:138:15
2019-09-30T01:17:52.1883667Z -   |
2019-09-30T01:17:52.1883667Z -   |
2019-09-30T01:17:52.1883865Z -LL |     for _v in bs.iter() {}
2019-09-30T01:17:52.1884121Z -   |               ^^^^^^^^^ help: to write this more concisely, try: `&bs`
2019-09-30T01:17:52.1884683Z -error: aborting due to 18 previous errors
2019-09-30T01:17:52.1884855Z -
2019-09-30T01:17:52.1885043Z -
2019-09-30T01:17:52.1885073Z 
2019-09-30T01:17:52.1885073Z 
2019-09-30T01:17:52.1885120Z The actual stderr differed from the expected stderr.
2019-09-30T01:17:52.1885500Z Actual stderr saved to /checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/for_loop_fixable.stderr
2019-09-30T01:17:52.1885564Z normalized fixed:
2019-09-30T01:17:52.1885753Z // run-rustfix
2019-09-30T01:17:52.1885805Z 
2019-09-30T01:17:52.1885848Z #![allow(dead_code, unused)]
2019-09-30T01:17:52.1885918Z use std::collections::*;
2019-09-30T01:17:52.1886060Z 
2019-09-30T01:17:52.1886102Z #[warn(clippy::all)]
2019-09-30T01:17:52.1886102Z #[warn(clippy::all)]
2019-09-30T01:17:52.1886146Z struct Unrelated(Vec<u8>);
2019-09-30T01:17:52.1886187Z impl Unrelated {
2019-09-30T01:17:52.1886453Z     fn next(&self) -> std::slice::Iter<u8> {
2019-09-30T01:17:52.1886512Z         self.0.iter()
2019-09-30T01:17:52.1886598Z 
2019-09-30T01:17:52.1886814Z     fn iter(&self) -> std::slice::Iter<u8> {
2019-09-30T01:17:52.1886860Z         self.0.iter()
2019-09-30T01:17:52.1886899Z     }
2019-09-30T01:17:52.1886899Z     }
2019-09-30T01:17:52.1886954Z }
2019-09-30T01:17:52.1886980Z 
2019-09-30T01:17:52.1887018Z #[warn(
2019-09-30T01:17:52.1887059Z     clippy::needless_range_loop,
2019-09-30T01:17:52.1887118Z     clippy::explicit_iter_loop,
2019-09-30T01:17:52.1887163Z     clippy::explicit_into_iter_loop,
2019-09-30T01:17:52.1887207Z     clippy::iter_next_loop,
2019-09-30T01:17:52.1887265Z     clippy::reverse_range_loop,
2019-09-30T01:17:52.1887308Z     clippy::for_kv_map
2019-09-30T01:17:52.1887356Z )]
2019-09-30T01:17:52.1887412Z #[allow(
2019-09-30T01:17:52.1887452Z     clippy::linkedlist,
2019-09-30T01:17:52.1887494Z     clippy::shadow_unrelated,
2019-09-30T01:17:52.1887537Z     clippy::unnecessary_mut_passed,
2019-09-30T01:17:52.1887596Z     clippy::cognitive_complexity,
2019-09-30T01:17:52.1887645Z     clippy::similar_names
2019-09-30T01:17:52.1887685Z )]
2019-09-30T01:17:52.1887747Z #[allow(clippy::many_single_char_names, unused_variables, clippy::into_iter_on_array)]
2019-09-30T01:17:52.1887948Z     const MAX_LEN: usize = 42;
2019-09-30T01:17:52.1888004Z     let mut vec = vec![1, 2, 3, 4];
2019-09-30T01:17:52.1888031Z 
2019-09-30T01:17:52.1888070Z     for i in 10..0 {
---
2019-09-30T01:17:52.1889387Z         // not an error
2019-09-30T01:17:52.1889444Z         println!("{}", i);
2019-09-30T01:17:52.1889481Z     }
2019-09-30T01:17:52.1889505Z 
2019-09-30T01:17:52.1889544Z     for i in (10..0).map(|x| x * 2) {
2019-09-30T01:17:52.1889812Z         // not an error, it can't be known what arbitrary methods do to a range
2019-09-30T01:17:52.1889898Z     }
2019-09-30T01:17:52.1889923Z 
2019-09-30T01:17:52.1889980Z     // testing that the empty range lint folds constants
2019-09-30T01:17:52.1890109Z     for i in 10..5 + 4 {
2019-09-30T01:17:52.1890109Z     for i in 10..5 + 4 {
2019-09-30T01:17:52.1890159Z         println!("{}", i);
2019-09-30T01:17:52.1890213Z     }
2019-09-30T01:17:52.1890236Z 
2019-09-30T01:17:52.1890460Z     for i in (5 + 2)..(3 - 1) {
2019-09-30T01:17:52.1890559Z     }
2019-09-30T01:17:52.1890583Z 
2019-09-30T01:17:52.1890583Z 
2019-09-30T01:17:52.1890621Z     for i in (2 * 2)..(2 * 3) {
2019-09-30T01:17:52.1890663Z         // no error, 4..6 is fine
2019-09-30T01:17:52.1890758Z     }
2019-09-30T01:17:52.1890782Z 
2019-09-30T01:17:52.1890837Z     let x = 42;
2019-09-30T01:17:52.1890878Z     for i in x..10 {
2019-09-30T01:17:52.1890878Z     for i in x..10 {
2019-09-30T01:17:52.1891194Z         // no error, not constant-foldable
2019-09-30T01:17:52.1891239Z         println!("{}", i);
2019-09-30T01:17:52.1891296Z     }
2019-09-30T01:17:52.1891321Z 
2019-09-30T01:17:52.1891358Z     // See #601
2019-09-30T01:17:52.1891397Z     for i in 0..10 {
2019-09-30T01:17:52.1891467Z         // no error, id_col does not exist outside the loop
2019-09-30T01:17:52.1891513Z         let mut id_col = vec![0f64; 10];
2019-09-30T01:17:52.1891554Z         id_col[i] = 1f64;
2019-09-30T01:17:52.1891632Z 
2019-09-30T01:17:52.1891632Z 
2019-09-30T01:17:52.1891672Z     for _v in vec.iter() {}
2019-09-30T01:17:52.1891698Z 
2019-09-30T01:17:52.1891754Z     for _v in vec.iter_mut() {}
2019-09-30T01:17:52.1891820Z     let out_vec = vec![1, 2, 3];
2019-09-30T01:17:52.1891820Z     let out_vec = vec![1, 2, 3];
2019-09-30T01:17:52.1891862Z     for _v in out_vec.into_iter() {}
2019-09-30T01:17:52.1891905Z 
2019-09-30T01:17:52.1891943Z     let array = [1, 2, 3];
2019-09-30T01:17:52.1891985Z     for _v in array.into_iter() {}
2019-09-30T01:17:52.1892019Z 
2019-09-30T01:17:52.1892075Z     for _v in &vec {} // these are fine
2019-09-30T01:17:52.1892118Z     for _v in &mut vec {} // these are fine
2019-09-30T01:17:52.1892146Z 
2019-09-30T01:17:52.1892184Z     for _v in [1, 2, 3].iter() {}
2019-09-30T01:17:52.1892225Z 
2019-09-30T01:17:52.1892273Z     for _v in (&mut [1, 2, 3]).iter() {} // no error
2019-09-30T01:17:52.1892301Z 
2019-09-30T01:17:52.1892340Z     for _v in [0; 32].iter() {}
2019-09-30T01:17:52.1892381Z 
2019-09-30T01:17:52.1892734Z     for _v in [0; 33].iter() {} // no error
2019-09-30T01:17:52.1892781Z 
2019-09-30T01:17:52.1892824Z     let ll: LinkedList<()> = LinkedList::new();
2019-09-30T01:17:52.1892888Z     for _v in ll.iter() {}
2019-09-30T01:17:52.1893062Z 
2019-09-30T01:17:52.1893207Z     let vd: VecDeque<()> = VecDeque::new();
2019-09-30T01:17:52.1893272Z     for _v in vd.iter() {}
2019-09-30T01:17:52.1893299Z 
2019-09-30T01:17:52.1893342Z     let bh: BinaryHeap<()> = BinaryHeap::new();
2019-09-30T01:17:52.1893386Z     for _v in bh.iter() {}
2019-09-30T01:17:52.1893422Z 
2019-09-30T01:17:52.1893483Z     let hm: HashMap<(), ()> = HashMap::new();
2019-09-30T01:17:52.1893527Z     for _v in hm.iter() {}
2019-09-30T01:17:52.1893553Z 
2019-09-30T01:17:52.1893612Z     let bt: BTreeMap<(), ()> = BTreeMap::new();
2019-09-30T01:17:52.1893662Z     for _v in bt.iter() {}
2019-09-30T01:17:52.1893690Z 
2019-09-30T01:17:52.1893731Z     let hs: HashSet<()> = HashSet::new();
2019-09-30T01:17:52.1893790Z     for _v in hs.iter() {}
2019-09-30T01:17:52.1893817Z 
2019-09-30T01:17:52.1893858Z     let bs: BTreeSet<()> = BTreeSet::new();
2019-09-30T01:17:52.1893901Z     for _v in bs.iter() {}
2019-09-30T01:17:52.1893943Z 
2019-09-30T01:17:52.1893984Z     let u = Unrelated(vec![]);
2019-09-30T01:17:52.1894026Z     for _v in u.next() {} // no error
2019-09-30T01:17:52.1894084Z     for _v in u.iter() {} // no error
2019-09-30T01:17:52.1894151Z     let mut out = vec![];
2019-09-30T01:17:52.1894151Z     let mut out = vec![];
2019-09-30T01:17:52.1894198Z     vec.iter().cloned().map(|x| out.push(x)).collect::<Vec<_>>();
2019-09-30T01:17:52.1894275Z     let _y = vec.iter().cloned().map(|x| out.push(x)).collect::<Vec<_>>(); // this is fine
2019-09-30T01:17:52.1894349Z     // Loop with explicit counter variable
2019-09-30T01:17:52.1894377Z 
2019-09-30T01:17:52.1894554Z     // Potential false positives
2019-09-30T01:17:52.1894610Z     let mut _index = 0;
2019-09-30T01:17:52.1894610Z     let mut _index = 0;
2019-09-30T01:17:52.1894652Z     _index = 1;
2019-09-30T01:17:52.1894710Z     for _v in &vec {
2019-09-30T01:17:52.1894752Z         _index += 1
2019-09-30T01:17:52.1894817Z 
2019-09-30T01:17:52.1894875Z     let mut _index = 0;
2019-09-30T01:17:52.1894916Z     _index += 1;
2019-09-30T01:17:52.1894916Z     _index += 1;
2019-09-30T01:17:52.1894957Z     for _v in &vec {
2019-09-30T01:17:52.1894998Z         _index += 1
2019-09-30T01:17:52.1895079Z 
2019-09-30T01:17:52.1895119Z     let mut _index = 0;
2019-09-30T01:17:52.1895159Z     if true {
2019-09-30T01:17:52.1895215Z         _index = 1
2019-09-30T01:17:52.1895215Z         _index = 1
2019-09-30T01:17:52.1895321Z     }
2019-09-30T01:17:52.1895361Z     for _v in &vec {
2019-09-30T01:17:52.1895418Z         _index += 1
2019-09-30T01:17:52.1895483Z 
2019-09-30T01:17:52.1895522Z     let mut _index = 0;
2019-09-30T01:17:52.1895579Z     let mut _index = 1;
2019-09-30T01:17:52.1895579Z     let mut _index = 1;
2019-09-30T01:17:52.1895627Z     for _v in &vec {
2019-09-30T01:17:52.1895669Z         _index += 1
2019-09-30T01:17:52.1895748Z 
2019-09-30T01:17:52.1895788Z     let mut _index = 0;
2019-09-30T01:17:52.1895788Z     let mut _index = 0;
2019-09-30T01:17:52.1895829Z     for _v in &vec {
2019-09-30T01:17:52.1895887Z         _index += 1;
2019-09-30T01:17:52.1895927Z         _index += 1
2019-09-30T01:17:52.1896098Z 
2019-09-30T01:17:52.1896153Z     let mut _index = 0;
2019-09-30T01:17:52.1896153Z     let mut _index = 0;
2019-09-30T01:17:52.1896192Z     for _v in &vec {
2019-09-30T01:17:52.1896231Z         _index *= 2;
2019-09-30T01:17:52.1896286Z         _index += 1
2019-09-30T01:17:52.1896347Z 
2019-09-30T01:17:52.1896392Z     let mut _index = 0;
2019-09-30T01:17:52.1896392Z     let mut _index = 0;
2019-09-30T01:17:52.1896447Z     for _v in &vec {
2019-09-30T01:17:52.1896486Z         _index = 1;
2019-09-30T01:17:52.1896525Z         _index += 1
2019-09-30T01:17:52.1896602Z 
2019-09-30T01:17:52.1896639Z     let mut _index = 0;
2019-09-30T01:17:52.1896672Z 
2019-09-30T01:17:52.1896672Z 
2019-09-30T01:17:52.1896710Z     for _v in &vec {
2019-09-30T01:17:52.1896765Z         let mut _index = 0;
2019-09-30T01:17:52.1896805Z         _index += 1
2019-09-30T01:17:52.1896866Z 
2019-09-30T01:17:52.1896922Z     let mut _index = 0;
2019-09-30T01:17:52.1896922Z     let mut _index = 0;
2019-09-30T01:17:52.1896960Z     for _v in &vec {
2019-09-30T01:17:52.1897000Z         _index += 1;
2019-09-30T01:17:52.1897054Z         _index = 0;
2019-09-30T01:17:52.1897115Z 
2019-09-30T01:17:52.1897153Z     let mut _index = 0;
2019-09-30T01:17:52.1897153Z     let mut _index = 0;
2019-09-30T01:17:52.1897209Z     for _v in &vec {
2019-09-30T01:17:52.1897250Z         for _x in 0..1 {
2019-09-30T01:17:52.1897290Z             _index += 1;
2019-09-30T01:17:52.1897391Z         _index += 1
2019-09-30T01:17:52.1897428Z     }
2019-09-30T01:17:52.1897452Z 
2019-09-30T01:17:52.1897507Z     let mut _index = 0;
---
2019-09-30T01:17:52.1897802Z     let mut _index = 0;
2019-09-30T01:17:52.1897841Z     if true {
2019-09-30T01:17:52.1897880Z         _index = 1
2019-09-30T01:17:52.1897919Z     };
2019-09-30T01:17:52.1897975Z     for _v in &vec {
2019-09-30T01:17:52.1898013Z         _index += 1
2019-09-30T01:17:52.1898075Z 
2019-09-30T01:17:52.1898130Z     let mut _index = 1;
2019-09-30T01:17:52.1898169Z     if false {
2019-09-30T01:17:52.1898209Z         _index = 0
2019-09-30T01:17:52.1898209Z         _index = 0
2019-09-30T01:17:52.1898264Z     };
2019-09-30T01:17:52.1898303Z     for _v in &vec {
2019-09-30T01:17:52.1898348Z         _index += 1
2019-09-30T01:17:52.1898427Z 
2019-09-30T01:17:52.1898465Z     let mut index = 0;
2019-09-30T01:17:52.1898503Z     {
2019-09-30T01:17:52.1898557Z         let mut _x = &mut index;
2019-09-30T01:17:52.1898557Z         let mut _x = &mut index;
2019-09-30T01:17:52.1898597Z     }
2019-09-30T01:17:52.1898695Z     for _v in &vec {
2019-09-30T01:17:52.1898743Z         _index += 1
2019-09-30T01:17:52.1898823Z 
2019-09-30T01:17:52.1898862Z     let mut index = 0;
2019-09-30T01:17:52.1898862Z     let mut index = 0;
2019-09-30T01:17:52.1898902Z     for _v in &vec {
2019-09-30T01:17:52.1898959Z         index += 1
2019-09-30T01:17:52.1898996Z     }
2019-09-30T01:17:52.1899035Z     println!("index: {}", index);
2019-09-30T01:17:52.1899082Z 
2019-09-30T01:17:52.1899381Z     fn f<T>(_: &T, _: &T) -> bool {
2019-09-30T01:17:52.1899463Z     }
2019-09-30T01:17:52.1899463Z     }
2019-09-30T01:17:52.1899522Z     fn g<T>(_: &mut [T], _: usize, _: usize) {
2019-09-30T01:17:52.1899726Z     }
2019-09-30T01:17:52.1899726Z     }
2019-09-30T01:17:52.1899783Z     for i in 1..vec.len() {
2019-09-30T01:17:52.1900014Z         if f(&vec[i - 1], &vec[i]) {
2019-09-30T01:17:52.1900210Z             g(&mut vec, i - 1, i);
2019-09-30T01:17:52.1900310Z     }
2019-09-30T01:17:52.1900344Z 
2019-09-30T01:17:52.1900344Z 
2019-09-30T01:17:52.1900384Z     for mid in 1..vec.len() {
2019-09-30T01:17:52.1900443Z         let (_, _) = vec.split_at(mid);
2019-09-30T01:17:52.1900518Z }
2019-09-30T01:17:52.1900542Z 
2019-09-30T01:17:52.1900542Z 
2019-09-30T01:17:52.1900782Z fn partition<T: PartialOrd + Send>(v: &mut [T]) -> usize {
2019-09-30T01:17:52.1900979Z     let pivot = v.len() - 1;
2019-09-30T01:17:52.1901023Z     let mut i = 0;
2019-09-30T01:17:52.1901079Z     for j in 0..pivot {
2019-09-30T01:17:52.1901122Z         if v[j] <= v[pivot] {
2019-09-30T01:17:52.1901163Z             v.swap(i, j);
2019-09-30T01:17:52.1901202Z             i += 1;
2019-09-30T01:17:52.1901302Z     }
2019-09-30T01:17:52.1901302Z     }
2019-09-30T01:17:52.1901340Z     v.swap(i, pivot);
2019-09-30T01:17:52.1901429Z }
2019-09-30T01:17:52.1901453Z 
2019-09-30T01:17:52.1901493Z #[warn(clippy::needless_range_loop)]
2019-09-30T01:17:52.1901493Z #[warn(clippy::needless_range_loop)]
2019-09-30T01:17:52.1901564Z pub fn manual_copy_same_destination(dst: &mut [i32], d: usize, s: usize) {
2019-09-30T01:17:52.1901789Z     // Same source and destination - don't trigger lint
2019-09-30T01:17:52.1901834Z     for i in 0..dst.len() {
2019-09-30T01:17:52.1901894Z         dst[d + i] = dst[s + i];
2019-09-30T01:17:52.1901968Z }
2019-09-30T01:17:52.1901992Z 
2019-09-30T01:17:52.1902048Z mod issue_2496 {
2019-09-30T01:17:52.1902088Z     pub trait Handle {
2019-09-30T01:17:52.1902088Z     pub trait Handle {
2019-09-30T01:17:52.1902298Z         fn new_for_index(index: usize) -> Self;
2019-09-30T01:17:52.1902888Z         fn index(&self) -> usize;
2019-09-30T01:17:52.1902969Z 
2019-09-30T01:17:52.1902969Z 
2019-09-30T01:17:52.1903184Z     pub fn test<H: Handle>() -> H {
2019-09-30T01:17:52.1903258Z         for x in 0..5 {
2019-09-30T01:17:52.1903302Z             let next_handle = H::new_for_index(x);
2019-09-30T01:17:52.1903350Z             println!("{}", next_handle.index());
2019-09-30T01:17:52.1903449Z         unimplemented!()
2019-09-30T01:17:52.1903598Z     }
2019-09-30T01:17:52.1903636Z }
2019-09-30T01:17:52.1903677Z 
2019-09-30T01:17:52.1903677Z 
2019-09-30T01:17:52.1903702Z 
2019-09-30T01:17:52.1903741Z expected fixed:
2019-09-30T01:17:52.1903942Z // run-rustfix
2019-09-30T01:17:52.1903988Z 
2019-09-30T01:17:52.1904031Z #![allow(dead_code, unused)]
2019-09-30T01:17:52.1904098Z use std::collections::*;
2019-09-30T01:17:52.1904125Z 
2019-09-30T01:17:52.1904180Z #[warn(clippy::all)]
2019-09-30T01:17:52.1904180Z #[warn(clippy::all)]
2019-09-30T01:17:52.1904222Z struct Unrelated(Vec<u8>);
2019-09-30T01:17:52.1904262Z impl Unrelated {
2019-09-30T01:17:52.1904495Z     fn next(&self) -> std::slice::Iter<u8> {
2019-09-30T01:17:52.1904542Z         self.0.iter()
2019-09-30T01:17:52.1904615Z 
2019-09-30T01:17:52.1904844Z     fn iter(&self) -> std::slice::Iter<u8> {
2019-09-30T01:17:52.1904890Z         self.0.iter()
2019-09-30T01:17:52.1904929Z     }
2019-09-30T01:17:52.1904929Z     }
2019-09-30T01:17:52.1904982Z }
2019-09-30T01:17:52.1905007Z 
2019-09-30T01:17:52.1905045Z #[warn(
2019-09-30T01:17:52.1905205Z     clippy::needless_range_loop,
2019-09-30T01:17:52.1905278Z     clippy::explicit_iter_loop,
2019-09-30T01:17:52.1905322Z     clippy::explicit_into_iter_loop,
2019-09-30T01:17:52.1905365Z     clippy::iter_next_loop,
2019-09-30T01:17:52.1905424Z     clippy::reverse_range_loop,
2019-09-30T01:17:52.1905467Z     clippy::for_kv_map
2019-09-30T01:17:52.1905506Z )]
2019-09-30T01:17:52.1905546Z #[allow(
2019-09-30T01:17:52.1905602Z     clippy::linkedlist,
2019-09-30T01:17:52.1905644Z     clippy::shadow_unrelated,
2019-09-30T01:17:52.1905687Z     clippy::unnecessary_mut_passed,
2019-09-30T01:17:52.1905748Z     clippy::cognitive_complexity,
2019-09-30T01:17:52.1905791Z     clippy::similar_names
2019-09-30T01:17:52.1906003Z )]
2019-09-30T01:17:52.1906065Z #[allow(clippy::many_single_char_names, unused_variables, clippy::into_iter_on_array)]
2019-09-30T01:17:52.1906151Z     const MAX_LEN: usize = 42;
2019-09-30T01:17:52.1906192Z     let mut vec = vec![1, 2, 3, 4];
2019-09-30T01:17:52.1906242Z 
2019-09-30T01:17:52.1906242Z 
2019-09-30T01:17:52.1906280Z     for i in (0..10).rev() {
2019-09-30T01:17:52.1906360Z     }
2019-09-30T01:17:52.1906401Z 
2019-09-30T01:17:52.1906401Z 
2019-09-30T01:17:52.1906440Z     for i in (0..=10).rev() {
2019-09-30T01:17:52.1906530Z     }
2019-09-30T01:17:52.1906554Z 
2019-09-30T01:17:52.1906554Z 
2019-09-30T01:17:52.1906593Z     for i in (0..MAX_LEN).rev() {
2019-09-30T01:17:52.1923827Z     }
2019-09-30T01:17:52.1923857Z 
2019-09-30T01:17:52.1923900Z     for i in 5..=5 {
2019-09-30T01:17:52.1924372Z         // not an error, this is the range with only one element “5”
---
2019-09-30T01:17:52.1924995Z         // not an error
2019-09-30T01:17:52.1925046Z         println!("{}", i);
2019-09-30T01:17:52.1925085Z     }
2019-09-30T01:17:52.1925111Z 
2019-09-30T01:17:52.1925153Z     for i in (10..0).map(|x| x * 2) {
2019-09-30T01:17:52.1925660Z         // not an error, it can't be known what arbitrary methods do to a range
2019-09-30T01:17:52.1925756Z     }
2019-09-30T01:17:52.1925796Z 
2019-09-30T01:17:52.1925841Z     // testing that the empty range lint folds constants
2019-09-30T01:17:52.1925841Z     // testing that the empty range lint folds constants
2019-09-30T01:17:52.1925996Z     for i in (5 + 4..10).rev() {
2019-09-30T01:17:52.1926096Z     }
2019-09-30T01:17:52.1926120Z 
2019-09-30T01:17:52.1926120Z 
2019-09-30T01:17:52.1926348Z     for i in ((3 - 1)..(5 + 2)).rev() {
2019-09-30T01:17:52.1926448Z     }
2019-09-30T01:17:52.1926480Z 
2019-09-30T01:17:52.1926480Z 
2019-09-30T01:17:52.1926520Z     for i in (2 * 2)..(2 * 3) {
2019-09-30T01:17:52.1926569Z         // no error, 4..6 is fine
2019-09-30T01:17:52.1926649Z     }
2019-09-30T01:17:52.1926673Z 
2019-09-30T01:17:52.1926719Z     let x = 42;
2019-09-30T01:17:52.1926759Z     for i in x..10 {
2019-09-30T01:17:52.1926759Z     for i in x..10 {
2019-09-30T01:17:52.1926984Z         // no error, not constant-foldable
2019-09-30T01:17:52.1927035Z         println!("{}", i);
2019-09-30T01:17:52.1927073Z     }
2019-09-30T01:17:52.1927097Z 
2019-09-30T01:17:52.1927135Z     // See #601
2019-09-30T01:17:52.1927179Z     for i in 0..10 {
2019-09-30T01:17:52.1927223Z         // no error, id_col does not exist outside the loop
2019-09-30T01:17:52.1927276Z         let mut id_col = vec![0f64; 10];
2019-09-30T01:17:52.1927443Z         id_col[i] = 1f64;
2019-09-30T01:17:52.1927509Z 
2019-09-30T01:17:52.1927509Z 
2019-09-30T01:17:52.1927549Z     for _v in &vec {}
2019-09-30T01:17:52.1927576Z 
2019-09-30T01:17:52.1927800Z     for _v in &mut vec {}
2019-09-30T01:17:52.1927881Z     let out_vec = vec![1, 2, 3];
2019-09-30T01:17:52.1927881Z     let out_vec = vec![1, 2, 3];
2019-09-30T01:17:52.1927932Z     for _v in out_vec {}
2019-09-30T01:17:52.1927959Z 
2019-09-30T01:17:52.1927999Z     let array = [1, 2, 3];
2019-09-30T01:17:52.1928041Z     for _v in &array {}
2019-09-30T01:17:52.1928067Z 
2019-09-30T01:17:52.1928122Z     for _v in &vec {} // these are fine
2019-09-30T01:17:52.1928166Z     for _v in &mut vec {} // these are fine
2019-09-30T01:17:52.1928195Z 
2019-09-30T01:17:52.1928246Z     for _v in &[1, 2, 3] {}
2019-09-30T01:17:52.1928273Z 
2019-09-30T01:17:52.1928316Z     for _v in (&mut [1, 2, 3]).iter() {} // no error
2019-09-30T01:17:52.1928419Z 
2019-09-30T01:17:52.1928468Z     for _v in &[0; 32] {}
2019-09-30T01:17:52.1928495Z 
2019-09-30T01:17:52.1928537Z     for _v in [0; 33].iter() {} // no error
2019-09-30T01:17:52.1928566Z 
2019-09-30T01:17:52.1928609Z     let ll: LinkedList<()> = LinkedList::new();
2019-09-30T01:17:52.1928674Z     for _v in &ll {}
2019-09-30T01:17:52.1928701Z 
2019-09-30T01:17:52.1928743Z     let vd: VecDeque<()> = VecDeque::new();
2019-09-30T01:17:52.1928792Z     for _v in &vd {}
2019-09-30T01:17:52.1928819Z 
2019-09-30T01:17:52.1928862Z     let bh: BinaryHeap<()> = BinaryHeap::new();
2019-09-30T01:17:52.1928906Z     for _v in &bh {}
2019-09-30T01:17:52.1928941Z 
2019-09-30T01:17:52.1928983Z     let hm: HashMap<(), ()> = HashMap::new();
2019-09-30T01:17:52.1929026Z     for _v in &hm {}
2019-09-30T01:17:52.1929053Z 
2019-09-30T01:17:52.1929101Z     let bt: BTreeMap<(), ()> = BTreeMap::new();
2019-09-30T01:17:52.1929144Z     for _v in &bt {}
2019-09-30T01:17:52.1929170Z 
2019-09-30T01:17:52.1929212Z     let hs: HashSet<()> = HashSet::new();
2019-09-30T01:17:52.1929267Z     for _v in &hs {}
2019-09-30T01:17:52.1929293Z 
2019-09-30T01:17:52.1929334Z     let bs: BTreeSet<()> = BTreeSet::new();
2019-09-30T01:17:52.1929377Z     for _v in &bs {}
2019-09-30T01:17:52.1929408Z 
2019-09-30T01:17:52.1929455Z     let u = Unrelated(vec![]);
2019-09-30T01:17:52.1929500Z     for _v in u.next() {} // no error
2019-09-30T01:17:52.1929549Z     for _v in u.iter() {} // no error
2019-09-30T01:17:52.1929616Z     let mut out = vec![];
2019-09-30T01:17:52.1929616Z     let mut out = vec![];
2019-09-30T01:17:52.1929663Z     vec.iter().cloned().map(|x| out.push(x)).collect::<Vec<_>>();
2019-09-30T01:17:52.1929722Z     let _y = vec.iter().cloned().map(|x| out.push(x)).collect::<Vec<_>>(); // this is fine
2019-09-30T01:17:52.1929797Z     // Loop with explicit counter variable
2019-09-30T01:17:52.1929824Z 
2019-09-30T01:17:52.1929876Z     // Potential false positives
2019-09-30T01:17:52.1929919Z     let mut _index = 0;
2019-09-30T01:17:52.1929919Z     let mut _index = 0;
2019-09-30T01:17:52.1929967Z     _index = 1;
2019-09-30T01:17:52.1930023Z     for _v in &vec {
2019-09-30T01:17:52.1930065Z         _index += 1
2019-09-30T01:17:52.1930129Z 
2019-09-30T01:17:52.1930177Z     let mut _index = 0;
2019-09-30T01:17:52.1930219Z     _index += 1;
2019-09-30T01:17:52.1930219Z     _index += 1;
2019-09-30T01:17:52.1930267Z     for _v in &vec {
2019-09-30T01:17:52.1930308Z         _index += 1
2019-09-30T01:17:52.1930378Z 
2019-09-30T01:17:52.1930417Z     let mut _index = 0;
2019-09-30T01:17:52.1930468Z     if true {
2019-09-30T01:17:52.1930509Z         _index = 1
2019-09-30T01:17:52.1930509Z         _index = 1
2019-09-30T01:17:52.1930548Z     }
2019-09-30T01:17:52.1930587Z     for _v in &vec {
2019-09-30T01:17:52.1930634Z         _index += 1
2019-09-30T01:17:52.1930697Z 
2019-09-30T01:17:52.1930736Z     let mut _index = 0;
2019-09-30T01:17:52.1930784Z     let mut _index = 1;
2019-09-30T01:17:52.1930784Z     let mut _index = 1;
2019-09-30T01:17:52.1930824Z     for _v in &vec {
2019-09-30T01:17:52.1930865Z         _index += 1
2019-09-30T01:17:52.1930941Z 
2019-09-30T01:17:52.1930981Z     let mut _index = 0;
2019-09-30T01:17:52.1930981Z     let mut _index = 0;
2019-09-30T01:17:52.1931129Z     for _v in &vec {
2019-09-30T01:17:52.1931174Z         _index += 1;
2019-09-30T01:17:52.1931213Z         _index += 1
2019-09-30T01:17:52.1931275Z 
2019-09-30T01:17:52.1931379Z     let mut _index = 0;
2019-09-30T01:17:52.1931379Z     let mut _index = 0;
2019-09-30T01:17:52.1931428Z     for _v in &vec {
2019-09-30T01:17:52.1931467Z         _index *= 2;
2019-09-30T01:17:52.1931513Z         _index += 1
2019-09-30T01:17:52.1931575Z 
2019-09-30T01:17:52.1931613Z     let mut _index = 0;
2019-09-30T01:17:52.1931613Z     let mut _index = 0;
2019-09-30T01:17:52.1931657Z     for _v in &vec {
2019-09-30T01:17:52.1931696Z         _index = 1;
2019-09-30T01:17:52.1931735Z         _index += 1
2019-09-30T01:17:52.1931804Z 
2019-09-30T01:17:52.1931843Z     let mut _index = 0;
2019-09-30T01:17:52.1931868Z 
2019-09-30T01:17:52.1931868Z 
2019-09-30T01:17:52.1931905Z     for _v in &vec {
2019-09-30T01:17:52.1931958Z         let mut _index = 0;
2019-09-30T01:17:52.1932060Z         _index += 1
2019-09-30T01:17:52.1932131Z 
2019-09-30T01:17:52.1932169Z     let mut _index = 0;
2019-09-30T01:17:52.1932169Z     let mut _index = 0;
2019-09-30T01:17:52.1932209Z     for _v in &vec {
2019-09-30T01:17:52.1932248Z         _index += 1;
2019-09-30T01:17:52.1932300Z         _index = 0;
2019-09-30T01:17:52.1932362Z 
2019-09-30T01:17:52.1932400Z     let mut _index = 0;
2019-09-30T01:17:52.1932400Z     let mut _index = 0;
2019-09-30T01:17:52.1932806Z     for _v in &vec {
2019-09-30T01:17:52.1932879Z         for _x in 0..1 {
2019-09-30T01:17:52.1932921Z             _index += 1;
2019-09-30T01:17:52.1933011Z         _index += 1
2019-09-30T01:17:52.1933050Z     }
2019-09-30T01:17:52.1933075Z 
2019-09-30T01:17:52.1933122Z     let mut _index = 0;
---
2019-09-30T01:17:52.1933411Z     let mut _index = 0;
2019-09-30T01:17:52.1933451Z     if true {
2019-09-30T01:17:52.1933492Z         _index = 1
2019-09-30T01:17:52.1933531Z     };
2019-09-30T01:17:52.1933577Z     for _v in &vec {
2019-09-30T01:17:52.1933618Z         _index += 1
2019-09-30T01:17:52.1933694Z 
2019-09-30T01:17:52.1933733Z     let mut _index = 1;
2019-09-30T01:17:52.1933774Z     if false {
2019-09-30T01:17:52.1933814Z         _index = 0
2019-09-30T01:17:52.1933814Z         _index = 0
2019-09-30T01:17:52.1933858Z     };
2019-09-30T01:17:52.1933898Z     for _v in &vec {
2019-09-30T01:17:52.1933938Z         _index += 1
2019-09-30T01:17:52.1934015Z 
2019-09-30T01:17:52.1934054Z     let mut index = 0;
2019-09-30T01:17:52.1934093Z     {
2019-09-30T01:17:52.1934145Z         let mut _x = &mut index;
2019-09-30T01:17:52.1934145Z         let mut _x = &mut index;
2019-09-30T01:17:52.1934185Z     }
2019-09-30T01:17:52.1934224Z     for _v in &vec {
2019-09-30T01:17:52.1934264Z         _index += 1
2019-09-30T01:17:52.1934340Z 
2019-09-30T01:17:52.1934379Z     let mut index = 0;
2019-09-30T01:17:52.1934379Z     let mut index = 0;
2019-09-30T01:17:52.1934426Z     for _v in &vec {
2019-09-30T01:17:52.1934466Z         index += 1
2019-09-30T01:17:52.1934504Z     }
2019-09-30T01:17:52.1934546Z     println!("index: {}", index);
2019-09-30T01:17:52.1934593Z 
2019-09-30T01:17:52.1934914Z     fn f<T>(_: &T, _: &T) -> bool {
2019-09-30T01:17:52.1935002Z     }
2019-09-30T01:17:52.1935002Z     }
2019-09-30T01:17:52.1935059Z     fn g<T>(_: &mut [T], _: usize, _: usize) {
2019-09-30T01:17:52.1935142Z     }
2019-09-30T01:17:52.1935142Z     }
2019-09-30T01:17:52.1935193Z     for i in 1..vec.len() {
2019-09-30T01:17:52.1935409Z         if f(&vec[i - 1], &vec[i]) {
2019-09-30T01:17:52.1935614Z             g(&mut vec, i - 1, i);
2019-09-30T01:17:52.1935703Z     }
2019-09-30T01:17:52.1935751Z 
2019-09-30T01:17:52.1935751Z 
2019-09-30T01:17:52.1935793Z     for mid in 1..vec.len() {
2019-09-30T01:17:52.1935848Z         let (_, _) = vec.split_at(mid);
2019-09-30T01:17:52.1935945Z }
2019-09-30T01:17:52.1936078Z 
2019-09-30T01:17:52.1936078Z 
2019-09-30T01:17:52.1936307Z fn partition<T: PartialOrd + Send>(v: &mut [T]) -> usize {
2019-09-30T01:17:52.1936505Z     let pivot = v.len() - 1;
2019-09-30T01:17:52.1936691Z     let mut i = 0;
2019-09-30T01:17:52.1936742Z     for j in 0..pivot {
2019-09-30T01:17:52.1936783Z         if v[j] <= v[pivot] {
2019-09-30T01:17:52.1936842Z             v.swap(i, j);
2019-09-30T01:17:52.1936881Z             i += 1;
2019-09-30T01:17:52.1936972Z     }
2019-09-30T01:17:52.1936972Z     }
2019-09-30T01:17:52.1937010Z     v.swap(i, pivot);
2019-09-30T01:17:52.1937083Z }
2019-09-30T01:17:52.1937126Z 
2019-09-30T01:17:52.1937165Z #[warn(clippy::needless_range_loop)]
2019-09-30T01:17:52.1937165Z #[warn(clippy::needless_range_loop)]
2019-09-30T01:17:52.1937212Z pub fn manual_copy_same_destination(dst: &mut [i32], d: usize, s: usize) {
2019-09-30T01:17:52.1937487Z     // Same source and destination - don't trigger lint
2019-09-30T01:17:52.1937625Z     for i in 0..dst.len() {
2019-09-30T01:17:52.1937667Z         dst[d + i] = dst[s + i];
2019-09-30T01:17:52.1937761Z }
2019-09-30T01:17:52.1937786Z 
2019-09-30T01:17:52.1937824Z mod issue_2496 {
2019-09-30T01:17:52.1937864Z     pub trait Handle {
2019-09-30T01:17:52.1937864Z     pub trait Handle {
2019-09-30T01:17:52.1938127Z         fn new_for_index(index: usize) -> Self;
2019-09-30T01:17:52.1938327Z         fn index(&self) -> usize;
2019-09-30T01:17:52.1938411Z 
2019-09-30T01:17:52.1938411Z 
2019-09-30T01:17:52.1938606Z     pub fn test<H: Handle>() -> H {
2019-09-30T01:17:52.1938648Z         for x in 0..5 {
2019-09-30T01:17:52.1938691Z             let next_handle = H::new_for_index(x);
2019-09-30T01:17:52.1938754Z             println!("{}", next_handle.index());
2019-09-30T01:17:52.1938834Z         unimplemented!()
2019-09-30T01:17:52.1938890Z     }
2019-09-30T01:17:52.1938925Z }
2019-09-30T01:17:52.1938948Z 
2019-09-30T01:17:52.1938948Z 
2019-09-30T01:17:52.1938973Z 
2019-09-30T01:17:52.1939035Z diff of fixed:
2019-09-30T01:17:52.1939061Z 
2019-09-30T01:17:52.1939241Z  // run-rustfix
2019-09-30T01:17:52.1939281Z  
2019-09-30T01:17:52.1939338Z  #![allow(dead_code, unused)]
2019-09-30T01:17:52.1939415Z  use std::collections::*;
2019-09-30T01:17:52.1939452Z  
2019-09-30T01:17:52.1939515Z  #[warn(clippy::all)]
2019-09-30T01:17:52.1939515Z  #[warn(clippy::all)]
2019-09-30T01:17:52.1939556Z  struct Unrelated(Vec<u8>);
2019-09-30T01:17:52.1939597Z  impl Unrelated {
2019-09-30T01:17:52.1939827Z      fn next(&self) -> std::slice::Iter<u8> {
2019-09-30T01:17:52.1939872Z          self.0.iter()
2019-09-30T01:17:52.1939964Z  
2019-09-30T01:17:52.1940170Z      fn iter(&self) -> std::slice::Iter<u8> {
2019-09-30T01:17:52.1940213Z          self.0.iter()
2019-09-30T01:17:52.1940251Z      }
2019-09-30T01:17:52.1940251Z      }
2019-09-30T01:17:52.1940306Z  }
2019-09-30T01:17:52.1940342Z  
2019-09-30T01:17:52.1940379Z  #[warn(
2019-09-30T01:17:52.1940436Z      clippy::needless_range_loop,
2019-09-30T01:17:52.1940478Z      clippy::explicit_iter_loop,
2019-09-30T01:17:52.1940529Z      clippy::explicit_into_iter_loop,
2019-09-30T01:17:52.1940570Z      clippy::iter_next_loop,
2019-09-30T01:17:52.1940627Z      clippy::reverse_range_loop,
2019-09-30T01:17:52.1940668Z      clippy::for_kv_map
2019-09-30T01:17:52.1940706Z  )]
2019-09-30T01:17:52.1940766Z  #[allow(
2019-09-30T01:17:52.1940805Z      clippy::linkedlist,
2019-09-30T01:17:52.1940846Z      clippy::shadow_unrelated,
2019-09-30T01:17:52.1940899Z      clippy::unnecessary_mut_passed,
2019-09-30T01:17:52.1940942Z      clippy::cognitive_complexity,
2019-09-30T01:17:52.1940983Z      clippy::similar_names
2019-09-30T01:17:52.1941021Z  )]
2019-09-30T01:17:52.1941083Z  #[allow(clippy::many_single_char_names, unused_variables, clippy::into_iter_on_array)]
2019-09-30T01:17:52.1941169Z      const MAX_LEN: usize = 42;
2019-09-30T01:17:52.1941226Z      let mut vec = vec![1, 2, 3, 4];
2019-09-30T01:17:52.1941265Z  
2019-09-30T01:17:52.1941265Z  
2019-09-30T01:17:52.1941467Z -    for i in (0..10).rev() {
2019-09-30T01:17:52.1941576Z          println!("{}", i);
2019-09-30T01:17:52.1941614Z      }
2019-09-30T01:17:52.1941650Z  
2019-09-30T01:17:52.1941650Z  
2019-09-30T01:17:52.1941860Z -    for i in (0..=10).rev() {
2019-09-30T01:17:52.1941904Z +    for i in 10..=0 {
2019-09-30T01:17:52.1942092Z      }
2019-09-30T01:17:52.1942128Z  
2019-09-30T01:17:52.1942128Z  
2019-09-30T01:17:52.1942782Z -    for i in (0..MAX_LEN).rev() {
2019-09-30T01:17:52.1942838Z +    for i in MAX_LEN..0 {
2019-09-30T01:17:52.1942940Z      }
2019-09-30T01:17:52.1942977Z  
2019-09-30T01:17:52.1943033Z      for i in 5..=5 {
2019-09-30T01:17:52.1943283Z          // not an error, this is the range with only one element “5”
---
2019-09-30T01:17:52.1944077Z          // not an error
2019-09-30T01:17:52.1944129Z          println!("{}", i);
2019-09-30T01:17:52.1944169Z      }
2019-09-30T01:17:52.1944222Z  
2019-09-30T01:17:52.1944264Z      for i in (10..0).map(|x| x * 2) {
2019-09-30T01:17:52.1944515Z          // not an error, it can't be known what arbitrary methods do to a range
2019-09-30T01:17:52.1944621Z      }
2019-09-30T01:17:52.1944659Z  
2019-09-30T01:17:52.1944720Z      // testing that the empty range lint folds constants
2019-09-30T01:17:52.1944720Z      // testing that the empty range lint folds constants
2019-09-30T01:17:52.1944928Z -    for i in (5 + 4..10).rev() {
2019-09-30T01:17:52.1944973Z +    for i in 10..5 + 4 {
2019-09-30T01:17:52.1945081Z      }
2019-09-30T01:17:52.1945118Z  
2019-09-30T01:17:52.1945118Z  
2019-09-30T01:17:52.1945328Z -    for i in ((3 - 1)..(5 + 2)).rev() {
2019-09-30T01:17:52.1945551Z +    for i in (5 + 2)..(3 - 1) {
2019-09-30T01:17:52.1945637Z      }
2019-09-30T01:17:52.1945692Z  
2019-09-30T01:17:52.1945692Z  
2019-09-30T01:17:52.1945742Z      for i in (2 * 2)..(2 * 3) {
2019-09-30T01:17:52.1945897Z          // no error, 4..6 is fine
2019-09-30T01:17:52.1945996Z      }
2019-09-30T01:17:52.1946031Z  
2019-09-30T01:17:52.1946069Z      let x = 42;
2019-09-30T01:17:52.1946126Z      for i in x..10 {
2019-09-30T01:17:52.1946126Z      for i in x..10 {
2019-09-30T01:17:52.1946334Z          // no error, not constant-foldable
2019-09-30T01:17:52.1946378Z          println!("{}", i);
2019-09-30T01:17:52.1946417Z      }
2019-09-30T01:17:52.1946470Z  
2019-09-30T01:17:52.1946507Z      // See #601
2019-09-30T01:17:52.1946546Z      for i in 0..10 {
2019-09-30T01:17:52.1946607Z          // no error, id_col does not exist outside the loop
2019-09-30T01:17:52.1946660Z          let mut id_col = vec![0f64; 10];
2019-09-30T01:17:52.1946702Z          id_col[i] = 1f64;
2019-09-30T01:17:52.1946793Z  
2019-09-30T01:17:52.1946793Z  
2019-09-30T01:17:52.1946978Z -    for _v in &vec {}
2019-09-30T01:17:52.1947021Z +    for _v in vec.iter() {}
2019-09-30T01:17:52.1947085Z  
2019-09-30T01:17:52.1947269Z -    for _v in &mut vec {}
2019-09-30T01:17:52.1947312Z +    for _v in vec.iter_mut() {}
2019-09-30T01:17:52.1947406Z      let out_vec = vec![1, 2, 3];
2019-09-30T01:17:52.1947406Z      let out_vec = vec![1, 2, 3];
2019-09-30T01:17:52.1947591Z -    for _v in out_vec {}
2019-09-30T01:17:52.1947650Z +    for _v in out_vec.into_iter() {}
2019-09-30T01:17:52.1947689Z  
2019-09-30T01:17:52.1947727Z      let array = [1, 2, 3];
2019-09-30T01:17:52.1947910Z -    for _v in &array {}
2019-09-30T01:17:52.1947970Z +    for _v in array.into_iter() {}
2019-09-30T01:17:52.1948008Z  
2019-09-30T01:17:52.1948049Z      for _v in &vec {} // these are fine
2019-09-30T01:17:52.1948106Z      for _v in &mut vec {} // these are fine
2019-09-30T01:17:52.1948153Z  
2019-09-30T01:17:52.1948344Z -    for _v in &[1, 2, 3] {}
2019-09-30T01:17:52.1948388Z +    for _v in [1, 2, 3].iter() {}
2019-09-30T01:17:52.1948445Z  
2019-09-30T01:17:52.1948486Z      for _v in (&mut [1, 2, 3]).iter() {} // no error
2019-09-30T01:17:52.1948609Z  
2019-09-30T01:17:52.1948850Z -    for _v in &[0; 32] {}
2019-09-30T01:17:52.1948895Z +    for _v in [0; 32].iter() {}
2019-09-30T01:17:52.1948933Z  
2019-09-30T01:17:52.1948992Z      for _v in [0; 33].iter() {} // no error
2019-09-30T01:17:52.1949030Z  
2019-09-30T01:17:52.1949071Z      let ll: LinkedList<()> = LinkedList::new();
2019-09-30T01:17:52.1949254Z -    for _v in &ll {}
2019-09-30T01:17:52.1949315Z +    for _v in ll.iter() {}
2019-09-30T01:17:52.1949352Z  
2019-09-30T01:17:52.1949392Z      let vd: VecDeque<()> = VecDeque::new();
2019-09-30T01:17:52.1949593Z -    for _v in &vd {}
2019-09-30T01:17:52.1949636Z +    for _v in vd.iter() {}
2019-09-30T01:17:52.1949673Z  
2019-09-30T01:17:52.1949811Z      let bh: BinaryHeap<()> = BinaryHeap::new();
2019-09-30T01:17:52.1950019Z -    for _v in &bh {}
2019-09-30T01:17:52.1950061Z +    for _v in bh.iter() {}
2019-09-30T01:17:52.1950098Z  
2019-09-30T01:17:52.1950156Z      let hm: HashMap<(), ()> = HashMap::new();
2019-09-30T01:17:52.1950346Z -    for _v in &hm {}
2019-09-30T01:17:52.1950388Z +    for _v in hm.iter() {}
2019-09-30T01:17:52.1950442Z  
2019-09-30T01:17:52.1950482Z      let bt: BTreeMap<(), ()> = BTreeMap::new();
2019-09-30T01:17:52.1950665Z -    for _v in &bt {}
2019-09-30T01:17:52.1950707Z +    for _v in bt.iter() {}
2019-09-30T01:17:52.1950762Z  
2019-09-30T01:17:52.1950802Z      let hs: HashSet<()> = HashSet::new();
2019-09-30T01:17:52.1950986Z -    for _v in &hs {}
2019-09-30T01:17:52.1951045Z +    for _v in hs.iter() {}
2019-09-30T01:17:52.1951082Z  
2019-09-30T01:17:52.1951122Z      let bs: BTreeSet<()> = BTreeSet::new();
2019-09-30T01:17:52.1951324Z -    for _v in &bs {}
2019-09-30T01:17:52.1951366Z +    for _v in bs.iter() {}
2019-09-30T01:17:52.1951412Z  
2019-09-30T01:17:52.1951450Z      let u = Unrelated(vec![]);
2019-09-30T01:17:52.1951510Z      for _v in u.next() {} // no error
2019-09-30T01:17:52.1951552Z      for _v in u.iter() {} // no error
2019-09-30T01:17:52.1951653Z      let mut out = vec![];
2019-09-30T01:17:52.1951653Z      let mut out = vec![];
2019-09-30T01:17:52.1951853Z      vec.iter().cloned().map(|x| out.push(x)).collect::<Vec<_>>();
2019-09-30T01:17:52.1951906Z      let _y = vec.iter().cloned().map(|x| out.push(x)).collect::<Vec<_>>(); // this is fine
2019-09-30T01:17:52.1952007Z      // Loop with explicit counter variable
2019-09-30T01:17:52.1952046Z  
2019-09-30T01:17:52.1952085Z      // Potential false positives
2019-09-30T01:17:52.1952144Z      let mut _index = 0;
2019-09-30T01:17:52.1952144Z      let mut _index = 0;
2019-09-30T01:17:52.1952183Z      _index = 1;
2019-09-30T01:17:52.1952224Z      for _v in &vec {
2019-09-30T01:17:52.1952282Z          _index += 1
2019-09-30T01:17:52.1952355Z  
2019-09-30T01:17:52.1952417Z      let mut _index = 0;
2019-09-30T01:17:52.1952836Z      _index += 1;
2019-09-30T01:17:52.1952836Z      _index += 1;
2019-09-30T01:17:52.1952882Z      for _v in &vec {
2019-09-30T01:17:52.1952923Z          _index += 1
2019-09-30T01:17:52.1953019Z  
2019-09-30T01:17:52.1953059Z      let mut _index = 0;
2019-09-30T01:17:52.1953124Z      if true {
2019-09-30T01:17:52.1953165Z          _index = 1
2019-09-30T01:17:52.1953165Z          _index = 1
2019-09-30T01:17:52.1953205Z      }
2019-09-30T01:17:52.1953245Z      for _v in &vec {
2019-09-30T01:17:52.1953304Z          _index += 1
2019-09-30T01:17:52.1953381Z  
2019-09-30T01:17:52.1953437Z      let mut _index = 0;
2019-09-30T01:17:52.1953478Z      let mut _index = 1;
2019-09-30T01:17:52.1953478Z      let mut _index = 1;
2019-09-30T01:17:52.1953519Z      for _v in &vec {
2019-09-30T01:17:52.1953560Z          _index += 1
2019-09-30T01:17:52.1953652Z  
2019-09-30T01:17:52.1953691Z      let mut _index = 0;
2019-09-30T01:17:52.1953691Z      let mut _index = 0;
2019-09-30T01:17:52.1953749Z      for _v in &vec {
2019-09-30T01:17:52.1953790Z          _index += 1;
2019-09-30T01:17:52.1953837Z          _index += 1
2019-09-30T01:17:52.1953931Z  
2019-09-30T01:17:52.1953970Z      let mut _index = 0;
2019-09-30T01:17:52.1953970Z      let mut _index = 0;
2019-09-30T01:17:52.1954010Z      for _v in &vec {
2019-09-30T01:17:52.1954067Z          _index *= 2;
2019-09-30T01:17:52.1954242Z          _index += 1
2019-09-30T01:17:52.1954347Z  
2019-09-30T01:17:52.1954387Z      let mut _index = 0;
2019-09-30T01:17:52.1954387Z      let mut _index = 0;
2019-09-30T01:17:52.1954428Z      for _v in &vec {
2019-09-30T01:17:52.1954468Z          _index = 1;
2019-09-30T01:17:52.1954525Z          _index += 1
2019-09-30T01:17:52.1954601Z  
2019-09-30T01:17:52.1954657Z      let mut _index = 0;
2019-09-30T01:17:52.1954695Z  
2019-09-30T01:17:52.1954695Z  
2019-09-30T01:17:52.1954735Z      for _v in &vec {
2019-09-30T01:17:52.1954776Z          let mut _index = 0;
2019-09-30T01:17:52.1954836Z          _index += 1
2019-09-30T01:17:52.1954911Z  
2019-09-30T01:17:52.1954968Z      let mut _index = 0;
2019-09-30T01:17:52.1954968Z      let mut _index = 0;
2019-09-30T01:17:52.1955081Z      for _v in &vec {
2019-09-30T01:17:52.1955121Z          _index += 1;
2019-09-30T01:17:52.1955179Z          _index = 0;
2019-09-30T01:17:52.1955256Z  
2019-09-30T01:17:52.1955295Z      let mut _index = 0;
2019-09-30T01:17:52.1955295Z      let mut _index = 0;
2019-09-30T01:17:52.1955359Z      for _v in &vec {
2019-09-30T01:17:52.1955401Z          for _x in 0..1 {
2019-09-30T01:17:52.1955443Z              _index += 1;
2019-09-30T01:17:52.1955541Z          _index += 1
2019-09-30T01:17:52.1955581Z      }
2019-09-30T01:17:52.1955618Z  
2019-09-30T01:17:52.1955673Z      let mut _index = 0;
---
2019-09-30T01:17:52.1955985Z      let mut _index = 0;
2019-09-30T01:17:52.1956026Z      if true {
2019-09-30T01:17:52.1956180Z          _index = 1
2019-09-30T01:17:52.1956237Z      };
2019-09-30T01:17:52.1956276Z      for _v in &vec {
2019-09-30T01:17:52.1956315Z          _index += 1
2019-09-30T01:17:52.1956406Z  
2019-09-30T01:17:52.1956443Z      let mut _index = 1;
2019-09-30T01:17:52.1956488Z      if false {
2019-09-30T01:17:52.1956544Z          _index = 0
2019-09-30T01:17:52.1956544Z          _index = 0
2019-09-30T01:17:52.1956582Z      };
2019-09-30T01:17:52.1956621Z      for _v in &vec {
2019-09-30T01:17:52.1956674Z          _index += 1
2019-09-30T01:17:52.1956747Z  
2019-09-30T01:17:52.1956785Z      let mut index = 0;
2019-09-30T01:17:52.1956838Z      {
2019-09-30T01:17:52.1956877Z          let mut _x = &mut index;
2019-09-30T01:17:52.1956877Z          let mut _x = &mut index;
2019-09-30T01:17:52.1956916Z      }
2019-09-30T01:17:52.1956968Z      for _v in &vec {
2019-09-30T01:17:52.1957007Z          _index += 1
2019-09-30T01:17:52.1957079Z  
2019-09-30T01:17:52.1957130Z      let mut index = 0;
2019-09-30T01:17:52.1957130Z      let mut index = 0;
2019-09-30T01:17:52.1957176Z      for _v in &vec {
2019-09-30T01:17:52.1957214Z          index += 1
2019-09-30T01:17:52.1957266Z      }
2019-09-30T01:17:52.1957306Z      println!("index: {}", index);
2019-09-30T01:17:52.1957344Z  
2019-09-30T01:17:52.1957647Z      fn f<T>(_: &T, _: &T) -> bool {
2019-09-30T01:17:52.1957758Z      }
2019-09-30T01:17:52.1957758Z      }
2019-09-30T01:17:52.1957800Z      fn g<T>(_: &mut [T], _: usize, _: usize) {
2019-09-30T01:17:52.1957899Z      }
2019-09-30T01:17:52.1957899Z      }
2019-09-30T01:17:52.1957938Z      for i in 1..vec.len() {
2019-09-30T01:17:52.1958161Z          if f(&vec[i - 1], &vec[i]) {
2019-09-30T01:17:52.1958362Z              g(&mut vec, i - 1, i);
2019-09-30T01:17:52.1958442Z      }
2019-09-30T01:17:52.1958497Z  
2019-09-30T01:17:52.1958497Z  
2019-09-30T01:17:52.1958536Z      for mid in 1..vec.len() {
2019-09-30T01:17:52.1958578Z          let (_, _) = vec.split_at(mid);
2019-09-30T01:17:52.1958680Z  }
2019-09-30T01:17:52.1958716Z  
2019-09-30T01:17:52.1958716Z  
2019-09-30T01:17:52.1958939Z  fn partition<T: PartialOrd + Send>(v: &mut [T]) -> usize {
2019-09-30T01:17:52.1959153Z      let pivot = v.len() - 1;
2019-09-30T01:17:52.1959196Z      let mut i = 0;
2019-09-30T01:17:52.1959236Z      for j in 0..pivot {
2019-09-30T01:17:52.1959382Z          if v[j] <= v[pivot] {
2019-09-30T01:17:52.1959432Z              v.swap(i, j);
2019-09-30T01:17:52.1959473Z              i += 1;
2019-09-30T01:17:52.1959566Z      }
2019-09-30T01:17:52.1959566Z      }
2019-09-30T01:17:52.1959603Z      v.swap(i, pivot);
2019-09-30T01:17:52.1959694Z  }
2019-09-30T01:17:52.1959729Z  
2019-09-30T01:17:52.1959768Z  #[warn(clippy::needless_range_loop)]
2019-09-30T01:17:52.1959768Z  #[warn(clippy::needless_range_loop)]
2019-09-30T01:17:52.1959831Z  pub fn manual_copy_same_destination(dst: &mut [i32], d: usize, s: usize) {
2019-09-30T01:17:52.1960083Z      // Same source and destination - don't trigger lint
2019-09-30T01:17:52.1960129Z      for i in 0..dst.len() {
2019-09-30T01:17:52.1960295Z          dst[d + i] = dst[s + i];
2019-09-30T01:17:52.1960370Z  }
2019-09-30T01:17:52.1960406Z  
2019-09-30T01:17:52.1960460Z  mod issue_2496 {
2019-09-30T01:17:52.1960500Z      pub trait Handle {
2019-09-30T01:17:52.1960500Z      pub trait Handle {
2019-09-30T01:17:52.1960747Z          fn new_for_index(index: usize) -> Self;
2019-09-30T01:17:52.1960964Z          fn index(&self) -> usize;
2019-09-30T01:17:52.1961042Z  
2019-09-30T01:17:52.1961042Z  
2019-09-30T01:17:52.1961237Z      pub fn test<H: Handle>() -> H {
2019-09-30T01:17:52.1961298Z          for x in 0..5 {
2019-09-30T01:17:52.1961341Z              let next_handle = H::new_for_index(x);
2019-09-30T01:17:52.1961387Z              println!("{}", next_handle.index());
2019-09-30T01:17:52.1961485Z          unimplemented!()
2019-09-30T01:17:52.1961523Z      }
2019-09-30T01:17:52.1961575Z  }
2019-09-30T01:17:52.1961611Z  
2019-09-30T01:17:52.1961611Z  
2019-09-30T01:17:52.1961637Z 
2019-09-30T01:17:52.1961679Z The actual fixed differed from the expected fixed.
2019-09-30T01:17:52.1962051Z Actual fixed saved to /checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/for_loop_fixable.fixed
2019-09-30T01:17:52.1962810Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'for_loop_fixable.rs'
2019-09-30T01:17:52.1962883Z 
2019-09-30T01:17:52.1962926Z error: 2 errors occurred comparing output.
2019-09-30T01:17:52.1962970Z status: exit code: 0
2019-09-30T01:17:52.1962970Z status: exit code: 0
2019-09-30T01:17:52.1964464Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/for_loop_fixable.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/for_loop_fixable.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/for_loop_fixable.stage-id.aux" "-A" "unused"
2019-09-30T01:17:52.1964894Z ------------------------------------------
2019-09-30T01:17:52.1964946Z 
2019-09-30T01:17:52.1965160Z ------------------------------------------
2019-09-30T01:17:52.1965204Z stderr:
---
2019-09-30T01:17:52.1966367Z expected stderr:
2019-09-30T01:17:52.1966587Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1966794Z   --> $DIR/manual_memcpy.rs:7:14
2019-09-30T01:17:52.1966857Z    |
2019-09-30T01:17:52.1966898Z LL |     for i in 0..src.len() {
2019-09-30T01:17:52.1966990Z    |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst[..src.len()].clone_from_slice(&src[..])`
2019-09-30T01:17:52.1967161Z    |
2019-09-30T01:17:52.1967425Z    = note: `-D clippy::manual-memcpy` implied by `-D warnings`
2019-09-30T01:17:52.1967670Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1967899Z   --> $DIR/manual_memcpy.rs:12:14
2019-09-30T01:17:52.1967942Z    |
2019-09-30T01:17:52.1967942Z    |
2019-09-30T01:17:52.1967982Z LL |     for i in 0..src.len() {
2019-09-30T01:17:52.1968054Z    |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst[10..(src.len() + 10)].clone_from_slice(&src[..])`
2019-09-30T01:17:52.1968309Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1968526Z   --> $DIR/manual_memcpy.rs:17:14
2019-09-30T01:17:52.1968568Z    |
2019-09-30T01:17:52.1968568Z    |
2019-09-30T01:17:52.1968608Z LL |     for i in 0..src.len() {
2019-09-30T01:17:52.1968661Z    |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst[..src.len()].clone_from_slice(&src[10..])`
2019-09-30T01:17:52.1968936Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1969134Z   --> $DIR/manual_memcpy.rs:22:14
2019-09-30T01:17:52.1969194Z    |
2019-09-30T01:17:52.1969194Z    |
2019-09-30T01:17:52.1969235Z LL |     for i in 11..src.len() {
2019-09-30T01:17:52.1969537Z    |              ^^^^^^^^^^^^^ help: try replacing the loop by: `dst[11..src.len()].clone_from_slice(&src[(11 - 10)..(src.len() - 10)])`
2019-09-30T01:17:52.1969811Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1970009Z   --> $DIR/manual_memcpy.rs:27:14
2019-09-30T01:17:52.1970050Z    |
2019-09-30T01:17:52.1970050Z    |
2019-09-30T01:17:52.1970108Z LL |     for i in 0..dst.len() {
2019-09-30T01:17:52.1970159Z    |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst.clone_from_slice(&src[..dst.len()])`
2019-09-30T01:17:52.1970410Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1970626Z   --> $DIR/manual_memcpy.rs:40:14
2019-09-30T01:17:52.1970676Z    |
2019-09-30T01:17:52.1970716Z LL |     for i in 10..256 {
2019-09-30T01:17:52.1970716Z LL |     for i in 10..256 {
2019-09-30T01:17:52.1970775Z    |              ^^^^^^^
2019-09-30T01:17:52.1970816Z help: try replacing the loop by
2019-09-30T01:17:52.1970855Z    |
2019-09-30T01:17:52.1971116Z LL |     for i in dst[10..256].clone_from_slice(&src[(10 - 5)..(256 - 5)])
2019-09-30T01:17:52.1971171Z LL |     dst2[(10 + 500)..(256 + 500)].clone_from_slice(&src[10..256]) {
2019-09-30T01:17:52.1971238Z 
2019-09-30T01:17:52.1971471Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1971670Z   --> $DIR/manual_memcpy.rs:52:14
2019-09-30T01:17:52.1971711Z    |
2019-09-30T01:17:52.1971711Z    |
2019-09-30T01:17:52.1971773Z LL |     for i in 10..LOOP_OFFSET {
2019-09-30T01:17:52.1972112Z    |              ^^^^^^^^^^^^^^^ help: try replacing the loop by: `dst[(10 + LOOP_OFFSET)..(LOOP_OFFSET + LOOP_OFFSET)].clone_from_slice(&src[(10 - some_var)..(LOOP_OFFSET - some_var)])`
2019-09-30T01:17:52.1972396Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1977452Z   --> $DIR/manual_memcpy.rs:65:14
2019-09-30T01:17:52.1977517Z    |
2019-09-30T01:17:52.1977517Z    |
2019-09-30T01:17:52.1977558Z LL |     for i in 0..src_vec.len() {
2019-09-30T01:17:52.1977798Z    |              ^^^^^^^^^^^^^^^^ help: try replacing the loop by: `dst_vec[..src_vec.len()].clone_from_slice(&src_vec[..])`
2019-09-30T01:17:52.1978114Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1978339Z   --> $DIR/manual_memcpy.rs:94:14
2019-09-30T01:17:52.1978382Z    |
2019-09-30T01:17:52.1978382Z    |
2019-09-30T01:17:52.1978425Z LL |     for i in from..from + src.len() {
2019-09-30T01:17:52.1979028Z    |              ^^^^^^^^^^^^^^^^^^^^^^ help: try replacing the loop by: `dst[from..from + src.len()].clone_from_slice(&src[0..(from + src.len() - from)])`
2019-09-30T01:17:52.1979303Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1983066Z   --> $DIR/manual_memcpy.rs:98:14
2019-09-30T01:17:52.1983324Z    |
2019-09-30T01:17:52.1983324Z    |
2019-09-30T01:17:52.1983366Z LL |     for i in from..from + 3 {
2019-09-30T01:17:52.1983738Z    |              ^^^^^^^^^^^^^^ help: try replacing the loop by: `dst[from..from + 3].clone_from_slice(&src[0..(from + 3 - from)])`
2019-09-30T01:17:52.1984033Z error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1984241Z   --> $DIR/manual_memcpy.rs:105:14
2019-09-30T01:17:52.1984301Z    |
2019-09-30T01:17:52.1984301Z    |
2019-09-30T01:17:52.1984343Z LL |     for i in 0..src.len() {
2019-09-30T01:17:52.1984396Z    |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst[..src.len()].clone_from_slice(&src[..])`
2019-09-30T01:17:52.1984489Z error: aborting due to 11 previous errors
2019-09-30T01:17:52.1984517Z 
2019-09-30T01:17:52.1984542Z 
2019-09-30T01:17:52.1984567Z 
2019-09-30T01:17:52.1984567Z 
2019-09-30T01:17:52.1984606Z diff of stderr:
2019-09-30T01:17:52.1984649Z 
2019-09-30T01:17:52.1984877Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1985092Z -  --> $DIR/manual_memcpy.rs:7:14
2019-09-30T01:17:52.1985288Z -   |
2019-09-30T01:17:52.1985493Z -LL |     for i in 0..src.len() {
2019-09-30T01:17:52.1985768Z -   |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst[..src.len()].clone_from_slice(&src[..])`
2019-09-30T01:17:52.1985973Z -   |
2019-09-30T01:17:52.1986314Z -   = note: `-D clippy::manual-memcpy` implied by `-D warnings`
2019-09-30T01:17:52.1986701Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1986919Z -  --> $DIR/manual_memcpy.rs:12:14
2019-09-30T01:17:52.1987089Z -   |
2019-09-30T01:17:52.1987089Z -   |
2019-09-30T01:17:52.1987283Z -LL |     for i in 0..src.len() {
2019-09-30T01:17:52.1987574Z -   |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst[10..(src.len() + 10)].clone_from_slice(&src[..])`
2019-09-30T01:17:52.1987966Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1988181Z -  --> $DIR/manual_memcpy.rs:17:14
2019-09-30T01:17:52.1988363Z -   |
2019-09-30T01:17:52.1988363Z -   |
2019-09-30T01:17:52.1988557Z -LL |     for i in 0..src.len() {
2019-09-30T01:17:52.1988825Z -   |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst[..src.len()].clone_from_slice(&src[10..])`
2019-09-30T01:17:52.1989241Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1989441Z -  --> $DIR/manual_memcpy.rs:22:14
2019-09-30T01:17:52.1989630Z -   |
2019-09-30T01:17:52.1989630Z -   |
2019-09-30T01:17:52.1989822Z -LL |     for i in 11..src.len() {
2019-09-30T01:17:52.1990115Z -   |              ^^^^^^^^^^^^^ help: try replacing the loop by: `dst[11..src.len()].clone_from_slice(&src[(11 - 10)..(src.len() - 10)])`
2019-09-30T01:17:52.1990529Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1990727Z -  --> $DIR/manual_memcpy.rs:27:14
2019-09-30T01:17:52.1990912Z -   |
2019-09-30T01:17:52.1990912Z -   |
2019-09-30T01:17:52.1991108Z -LL |     for i in 0..dst.len() {
2019-09-30T01:17:52.1991379Z -   |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst.clone_from_slice(&src[..dst.len()])`
2019-09-30T01:17:52.1992098Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1992311Z -  --> $DIR/manual_memcpy.rs:40:14
2019-09-30T01:17:52.1993122Z -   |
2019-09-30T01:17:52.1993419Z -LL |     for i in 10..256 {
2019-09-30T01:17:52.1993419Z -LL |     for i in 10..256 {
2019-09-30T01:17:52.1993616Z -   |              ^^^^^^^
2019-09-30T01:17:52.1993817Z -help: try replacing the loop by
2019-09-30T01:17:52.1994012Z -   |
2019-09-30T01:17:52.1994258Z -LL |     for i in dst[10..256].clone_from_slice(&src[(10 - 5)..(256 - 5)])
2019-09-30T01:17:52.1994511Z -LL |     dst2[(10 + 500)..(256 + 500)].clone_from_slice(&src[10..256]) {
2019-09-30T01:17:52.1994875Z -
2019-09-30T01:17:52.1995099Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1995306Z -  --> $DIR/manual_memcpy.rs:52:14
2019-09-30T01:17:52.1995499Z -   |
2019-09-30T01:17:52.1995499Z -   |
2019-09-30T01:17:52.1995834Z -LL |     for i in 10..LOOP_OFFSET {
2019-09-30T01:17:52.1996187Z -   |              ^^^^^^^^^^^^^^^ help: try replacing the loop by: `dst[(10 + LOOP_OFFSET)..(LOOP_OFFSET + LOOP_OFFSET)].clone_from_slice(&src[(10 - some_var)..(LOOP_OFFSET - some_var)])`
2019-09-30T01:17:52.1996635Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1996949Z -  --> $DIR/manual_memcpy.rs:65:14
2019-09-30T01:17:52.1997139Z -   |
2019-09-30T01:17:52.1997139Z -   |
2019-09-30T01:17:52.1997336Z -LL |     for i in 0..src_vec.len() {
2019-09-30T01:17:52.1997614Z -   |              ^^^^^^^^^^^^^^^^ help: try replacing the loop by: `dst_vec[..src_vec.len()].clone_from_slice(&src_vec[..])`
2019-09-30T01:17:52.1998023Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1998223Z -  --> $DIR/manual_memcpy.rs:94:14
2019-09-30T01:17:52.1998410Z -   |
2019-09-30T01:17:52.1998410Z -   |
2019-09-30T01:17:52.1998616Z -LL |     for i in from..from + src.len() {
2019-09-30T01:17:52.1998930Z -   |              ^^^^^^^^^^^^^^^^^^^^^^ help: try replacing the loop by: `dst[from..from + src.len()].clone_from_slice(&src[0..(from + src.len() - from)])`
2019-09-30T01:17:52.1999343Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.1999550Z -  --> $DIR/manual_memcpy.rs:98:14
2019-09-30T01:17:52.1999720Z -   |
2019-09-30T01:17:52.1999720Z -   |
2019-09-30T01:17:52.1999935Z -LL |     for i in from..from + 3 {
2019-09-30T01:17:52.2000222Z -   |              ^^^^^^^^^^^^^^ help: try replacing the loop by: `dst[from..from + 3].clone_from_slice(&src[0..(from + 3 - from)])`
2019-09-30T01:17:52.2000631Z -error: it looks like you're manually copying between slices
2019-09-30T01:17:52.2000831Z -  --> $DIR/manual_memcpy.rs:105:14
2019-09-30T01:17:52.2001002Z -   |
2019-09-30T01:17:52.2001002Z -   |
2019-09-30T01:17:52.2001214Z -LL |     for i in 0..src.len() {
2019-09-30T01:17:52.2001478Z -   |              ^^^^^^^^^^^^ help: try replacing the loop by: `dst[..src.len()].clone_from_slice(&src[..])`
2019-09-30T01:17:52.2001881Z -error: aborting due to 11 previous errors
2019-09-30T01:17:52.2002050Z -
2019-09-30T01:17:52.2002210Z -
2019-09-30T01:17:52.2002239Z 
2019-09-30T01:17:52.2002239Z 
2019-09-30T01:17:52.2002301Z The actual stderr differed from the expected stderr.
2019-09-30T01:17:52.2003025Z Actual stderr saved to /checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/manual_memcpy.stderr
2019-09-30T01:17:52.2003095Z To update references, run this command from build directory:
2019-09-30T01:17:52.2003481Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'manual_memcpy.rs'
2019-09-30T01:17:52.2003523Z 
2019-09-30T01:17:52.2003566Z error: 1 errors occurred comparing output.
2019-09-30T01:17:52.2003625Z status: exit code: 0
2019-09-30T01:17:52.2005149Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/manual_memcpy.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/manual_memcpy.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/manual_memcpy.stage-id.aux" "-A" "unused"
2019-09-30T01:17:52.2005697Z ------------------------------------------
2019-09-30T01:17:52.2005732Z 
2019-09-30T01:17:52.2006055Z ------------------------------------------
2019-09-30T01:17:52.2006097Z stderr:
---
2019-09-30T01:17:52.2006859Z normalized stderr:
2019-09-30T01:17:52.2006885Z 
2019-09-30T01:17:52.2006927Z 
2019-09-30T01:17:52.2006966Z expected stderr:
2019-09-30T01:17:52.2007014Z error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2007299Z    |
2019-09-30T01:17:52.2007339Z LL |         m = 5;
2019-09-30T01:17:52.2007379Z    |         ^^^^^
2019-09-30T01:17:52.2007434Z    |
2019-09-30T01:17:52.2007434Z    |
2019-09-30T01:17:52.2007666Z    = note: `-D clippy::mut-range-bound` implied by `-D warnings`
2019-09-30T01:17:52.2007699Z 
2019-09-30T01:17:52.2007763Z error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2008012Z    |
2019-09-30T01:17:52.2008051Z LL |         m *= 2;
2019-09-30T01:17:52.2008108Z    |         ^^^^^^
2019-09-30T01:17:52.2008134Z 
2019-09-30T01:17:52.2008134Z 
2019-09-30T01:17:52.2008180Z error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2008446Z    |
2019-09-30T01:17:52.2008484Z LL |         m = 5;
2019-09-30T01:17:52.2008532Z    |         ^^^^^
2019-09-30T01:17:52.2008574Z 
2019-09-30T01:17:52.2008574Z 
2019-09-30T01:17:52.2008620Z error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2008875Z    |
2019-09-30T01:17:52.2008922Z LL |         n = 7;
2019-09-30T01:17:52.2008962Z    |         ^^^^^
2019-09-30T01:17:52.2008988Z 
2019-09-30T01:17:52.2008988Z 
2019-09-30T01:17:52.2009049Z error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2009297Z    |
2019-09-30T01:17:52.2009297Z    |
2019-09-30T01:17:52.2009356Z LL |         let n = &mut m; // warning
2019-09-30T01:17:52.2009426Z 
2019-09-30T01:17:52.2009466Z error: aborting due to 5 previous errors
2019-09-30T01:17:52.2009510Z 
2019-09-30T01:17:52.2009533Z 
2019-09-30T01:17:52.2009533Z 
2019-09-30T01:17:52.2009557Z 
2019-09-30T01:17:52.2009595Z diff of stderr:
2019-09-30T01:17:52.2009621Z 
2019-09-30T01:17:52.2009903Z -error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2010275Z -   |
2019-09-30T01:17:52.2010476Z -LL |         m = 5;
2019-09-30T01:17:52.2010658Z -   |         ^^^^^
2019-09-30T01:17:52.2010910Z -   |
2019-09-30T01:17:52.2010910Z -   |
2019-09-30T01:17:52.2011167Z -   = note: `-D clippy::mut-range-bound` implied by `-D warnings`
2019-09-30T01:17:52.2011358Z -
2019-09-30T01:17:52.2011606Z -error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2011994Z -   |
2019-09-30T01:17:52.2012174Z -LL |         m *= 2;
2019-09-30T01:17:52.2012355Z -   |         ^^^^^^
2019-09-30T01:17:52.2012899Z -
2019-09-30T01:17:52.2012899Z -
2019-09-30T01:17:52.2013497Z -error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2014073Z -   |
2019-09-30T01:17:52.2014266Z -LL |         m = 5;
2019-09-30T01:17:52.2014451Z -   |         ^^^^^
2019-09-30T01:17:52.2014619Z -
2019-09-30T01:17:52.2014619Z -
2019-09-30T01:17:52.2014899Z -error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2015294Z -   |
2019-09-30T01:17:52.2015500Z -LL |         n = 7;
2019-09-30T01:17:52.2015689Z -   |         ^^^^^
2019-09-30T01:17:52.2015964Z -
2019-09-30T01:17:52.2015964Z -
2019-09-30T01:17:52.2016213Z -error: attempt to mutate range bound within loop; note that the range of the loop is unchanged
2019-09-30T01:17:52.2016608Z -   |
2019-09-30T01:17:52.2016608Z -   |
2019-09-30T01:17:52.2016810Z -LL |         let n = &mut m; // warning
2019-09-30T01:17:52.2017187Z -
2019-09-30T01:17:52.2017389Z -error: aborting due to 5 previous errors
2019-09-30T01:17:52.2017572Z -
2019-09-30T01:17:52.2017746Z -
---
2019-09-30T01:17:52.2018630Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'mut_range_bound.rs'
2019-09-30T01:17:52.2018673Z 
2019-09-30T01:17:52.2018714Z error: 1 errors occurred comparing output.
2019-09-30T01:17:52.2018756Z status: exit code: 0
2019-09-30T01:17:52.2020150Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/mut_range_bound.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/mut_range_bound.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/mut_range_bound.stage-id.aux" "-A" "unused"
2019-09-30T01:17:52.2020554Z ------------------------------------------
2019-09-30T01:17:52.2020603Z 
2019-09-30T01:17:52.2020807Z ------------------------------------------
2019-09-30T01:17:52.2020850Z stderr:
---
2019-09-30T01:17:52.2021757Z normalized stderr:
2019-09-30T01:17:52.2021783Z 
2019-09-30T01:17:52.2021807Z 
2019-09-30T01:17:52.2021863Z expected stderr:
2019-09-30T01:17:52.2021907Z error: the loop variable `i` is only used to index `ns`.
2019-09-30T01:17:52.2022118Z   --> $DIR/needless_range_loop.rs:15:14
2019-09-30T01:17:52.2022223Z LL |     for i in 3..10 {
2019-09-30T01:17:52.2022355Z    |              ^^^^^
2019-09-30T01:17:52.2022410Z    |
2019-09-30T01:17:52.2022410Z    |
2019-09-30T01:17:52.2023039Z    = note: `-D clippy::needless-range-loop` implied by `-D warnings`
2019-09-30T01:17:52.2023134Z    |
2019-09-30T01:17:52.2023134Z    |
2019-09-30T01:17:52.2023208Z LL |     for <item> in ns.iter().take(10).skip(3) {
2019-09-30T01:17:52.2023286Z 
2019-09-30T01:17:52.2023286Z 
2019-09-30T01:17:52.2023346Z error: the loop variable `i` is only used to index `ms`.
2019-09-30T01:17:52.2023565Z   --> $DIR/needless_range_loop.rs:36:14
2019-09-30T01:17:52.2023649Z LL |     for i in 0..ms.len() {
2019-09-30T01:17:52.2023710Z    |              ^^^^^^^^^^^
2019-09-30T01:17:52.2023753Z help: consider using an iterator
2019-09-30T01:17:52.2023794Z    |
2019-09-30T01:17:52.2023794Z    |
2019-09-30T01:17:52.2023853Z LL |     for <item> in &mut ms {
2019-09-30T01:17:52.2023923Z 
2019-09-30T01:17:52.2023923Z 
2019-09-30T01:17:52.2023976Z error: the loop variable `i` is only used to index `ms`.
2019-09-30T01:17:52.2024210Z   --> $DIR/needless_range_loop.rs:42:14
2019-09-30T01:17:52.2024294Z LL |     for i in 0..ms.len() {
2019-09-30T01:17:52.2024357Z    |              ^^^^^^^^^^^
2019-09-30T01:17:52.2024407Z help: consider using an iterator
2019-09-30T01:17:52.2024447Z    |
2019-09-30T01:17:52.2024447Z    |
2019-09-30T01:17:52.2024505Z LL |     for <item> in &mut ms {
2019-09-30T01:17:52.2024575Z 
2019-09-30T01:17:52.2024575Z 
2019-09-30T01:17:52.2024620Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2024854Z   --> $DIR/needless_range_loop.rs:66:14
2019-09-30T01:17:52.2024898Z    |
2019-09-30T01:17:52.2024939Z LL |     for i in x..x + 4 {
2019-09-30T01:17:52.2025042Z help: consider using an iterator
2019-09-30T01:17:52.2025083Z    |
2019-09-30T01:17:52.2025083Z    |
2019-09-30T01:17:52.2025126Z LL |     for <item> in vec.iter_mut().skip(x).take(4) {
2019-09-30T01:17:52.2025227Z 
2019-09-30T01:17:52.2025227Z 
2019-09-30T01:17:52.2025271Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2025506Z   --> $DIR/needless_range_loop.rs:73:14
2019-09-30T01:17:52.2025551Z    |
2019-09-30T01:17:52.2025599Z LL |     for i in x..=x + 4 {
2019-09-30T01:17:52.2025705Z help: consider using an iterator
2019-09-30T01:17:52.2025745Z    |
2019-09-30T01:17:52.2025745Z    |
2019-09-30T01:17:52.2025790Z LL |     for <item> in vec.iter_mut().skip(x).take(4 + 1) {
2019-09-30T01:17:52.2025995Z 
2019-09-30T01:17:52.2025995Z 
2019-09-30T01:17:52.2026037Z error: the loop variable `i` is only used to index `arr`.
2019-09-30T01:17:52.2026247Z   --> $DIR/needless_range_loop.rs:79:14
2019-09-30T01:17:52.2026347Z LL |     for i in 0..3 {
2019-09-30T01:17:52.2026389Z    |              ^^^^
2019-09-30T01:17:52.2026456Z help: consider using an iterator
2019-09-30T01:17:52.2026494Z    |
2019-09-30T01:17:52.2026494Z    |
2019-09-30T01:17:52.2026533Z LL |     for <item> in &arr {
2019-09-30T01:17:52.2026619Z 
2019-09-30T01:17:52.2026619Z 
2019-09-30T01:17:52.2026776Z error: the loop variable `i` is only used to index `arr`.
2019-09-30T01:17:52.2027024Z   --> $DIR/needless_range_loop.rs:83:14
2019-09-30T01:17:52.2027123Z LL |     for i in 0..2 {
2019-09-30T01:17:52.2027164Z    |              ^^^^
2019-09-30T01:17:52.2027221Z help: consider using an iterator
2019-09-30T01:17:52.2027259Z    |
2019-09-30T01:17:52.2027259Z    |
2019-09-30T01:17:52.2027300Z LL |     for <item> in arr.iter().take(2) {
2019-09-30T01:17:52.2027389Z 
2019-09-30T01:17:52.2027389Z 
2019-09-30T01:17:52.2027430Z error: the loop variable `i` is only used to index `arr`.
2019-09-30T01:17:52.2027637Z   --> $DIR/needless_range_loop.rs:87:14
2019-09-30T01:17:52.2027841Z LL |     for i in 1..3 {
2019-09-30T01:17:52.2027881Z    |              ^^^^
2019-09-30T01:17:52.2027922Z help: consider using an iterator
2019-09-30T01:17:52.2027978Z    |
2019-09-30T01:17:52.2027978Z    |
2019-09-30T01:17:52.2028019Z LL |     for <item> in arr.iter().skip(1) {
2019-09-30T01:17:52.2028113Z 
2019-09-30T01:17:52.2028113Z 
2019-09-30T01:17:52.2028155Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2028391Z   --> $DIR/needless_range_loop.rs:93:14
2019-09-30T01:17:52.2028432Z    |
2019-09-30T01:17:52.2028491Z LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2028574Z help: consider using an iterator
2019-09-30T01:17:52.2028630Z    |
2019-09-30T01:17:52.2028630Z    |
2019-09-30T01:17:52.2028669Z LL |     for <item> in &vec {
2019-09-30T01:17:52.2028736Z 
2019-09-30T01:17:52.2028736Z 
2019-09-30T01:17:52.2028796Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2029004Z   --> $DIR/needless_range_loop.rs:102:14
2019-09-30T01:17:52.2029054Z    |
2019-09-30T01:17:52.2029112Z LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2029195Z help: consider using an iterator
2019-09-30T01:17:52.2029250Z    |
2019-09-30T01:17:52.2029250Z    |
2019-09-30T01:17:52.2029296Z LL |     for <item> in &vec {
2019-09-30T01:17:52.2029365Z 
2019-09-30T01:17:52.2029365Z 
2019-09-30T01:17:52.2029427Z error: the loop variable `j` is only used to index `STATIC`.
2019-09-30T01:17:52.2029637Z   --> $DIR/needless_range_loop.rs:107:14
2019-09-30T01:17:52.2029679Z    |
2019-09-30T01:17:52.2029718Z LL |     for j in 0..4 {
2019-09-30T01:17:52.2029818Z help: consider using an iterator
2019-09-30T01:17:52.2029857Z    |
2019-09-30T01:17:52.2029857Z    |
2019-09-30T01:17:52.2029914Z LL |     for <item> in &STATIC {
2019-09-30T01:17:52.2029981Z 
2019-09-30T01:17:52.2029981Z 
2019-09-30T01:17:52.2030025Z error: the loop variable `j` is only used to index `CONST`.
2019-09-30T01:17:52.2030257Z   --> $DIR/needless_range_loop.rs:111:14
2019-09-30T01:17:52.2030300Z    |
2019-09-30T01:17:52.2030339Z LL |     for j in 0..4 {
2019-09-30T01:17:52.2030446Z help: consider using an iterator
2019-09-30T01:17:52.2030484Z    |
2019-09-30T01:17:52.2030484Z    |
2019-09-30T01:17:52.2030539Z LL |     for <item> in &CONST {
2019-09-30T01:17:52.2030607Z 
2019-09-30T01:17:52.2030607Z 
2019-09-30T01:17:52.2030649Z error: the loop variable `i` is used to index `vec`
2019-09-30T01:17:52.2030873Z   --> $DIR/needless_range_loop.rs:115:14
2019-09-30T01:17:52.2030915Z    |
2019-09-30T01:17:52.2030954Z LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2031054Z help: consider using an iterator
2019-09-30T01:17:52.2031093Z    |
2019-09-30T01:17:52.2031093Z    |
2019-09-30T01:17:52.2031134Z LL |     for (i, <item>) in vec.iter().enumerate() {
2019-09-30T01:17:52.2031233Z 
2019-09-30T01:17:52.2031233Z 
2019-09-30T01:17:52.2031276Z error: the loop variable `i` is only used to index `vec2`.
2019-09-30T01:17:52.2031501Z   --> $DIR/needless_range_loop.rs:123:14
2019-09-30T01:17:52.2031544Z    |
2019-09-30T01:17:52.2031875Z LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2032010Z help: consider using an iterator
2019-09-30T01:17:52.2032048Z    |
2019-09-30T01:17:52.2032048Z    |
2019-09-30T01:17:52.2032089Z LL |     for <item> in vec2.iter().take(vec.len()) {
2019-09-30T01:17:52.2032181Z 
2019-09-30T01:17:52.2032181Z 
2019-09-30T01:17:52.2032223Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2032963Z   --> $DIR/needless_range_loop.rs:127:14
2019-09-30T01:17:52.2033039Z    |
2019-09-30T01:17:52.2033079Z LL |     for i in 5..vec.len() {
2019-09-30T01:17:52.2033182Z help: consider using an iterator
2019-09-30T01:17:52.2033373Z    |
2019-09-30T01:17:52.2033373Z    |
2019-09-30T01:17:52.2033414Z LL |     for <item> in vec.iter().skip(5) {
2019-09-30T01:17:52.2033509Z 
2019-09-30T01:17:52.2033509Z 
2019-09-30T01:17:52.2033561Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2033832Z   --> $DIR/needless_range_loop.rs:131:14
2019-09-30T01:17:52.2033935Z LL |     for i in 0..MAX_LEN {
2019-09-30T01:17:52.2033978Z    |              ^^^^^^^^^^
2019-09-30T01:17:52.2034037Z help: consider using an iterator
2019-09-30T01:17:52.2034077Z    |
2019-09-30T01:17:52.2034077Z    |
2019-09-30T01:17:52.2034119Z LL |     for <item> in vec.iter().take(MAX_LEN) {
2019-09-30T01:17:52.2034211Z 
2019-09-30T01:17:52.2034211Z 
2019-09-30T01:17:52.2034255Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2034962Z   --> $DIR/needless_range_loop.rs:135:14
2019-09-30T01:17:52.2035037Z    |
2019-09-30T01:17:52.2035092Z LL |     for i in 0..=MAX_LEN {
2019-09-30T01:17:52.2035177Z help: consider using an iterator
2019-09-30T01:17:52.2035237Z    |
2019-09-30T01:17:52.2035237Z    |
2019-09-30T01:17:52.2035281Z LL |     for <item> in vec.iter().take(MAX_LEN + 1) {
2019-09-30T01:17:52.2035382Z 
2019-09-30T01:17:52.2035382Z 
2019-09-30T01:17:52.2035426Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2035655Z   --> $DIR/needless_range_loop.rs:139:14
2019-09-30T01:17:52.2035757Z LL |     for i in 5..10 {
2019-09-30T01:17:52.2035799Z    |              ^^^^^
2019-09-30T01:17:52.2035843Z help: consider using an iterator
2019-09-30T01:17:52.2035901Z    |
2019-09-30T01:17:52.2035901Z    |
2019-09-30T01:17:52.2036053Z LL |     for <item> in vec.iter().take(10).skip(5) {
2019-09-30T01:17:52.2036125Z 
2019-09-30T01:17:52.2036125Z 
2019-09-30T01:17:52.2036184Z error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2036525Z   --> $DIR/needless_range_loop.rs:143:14
2019-09-30T01:17:52.2036628Z LL |     for i in 5..=10 {
2019-09-30T01:17:52.2036671Z    |              ^^^^^^
2019-09-30T01:17:52.2036721Z help: consider using an iterator
2019-09-30T01:17:52.2036779Z    |
2019-09-30T01:17:52.2036779Z    |
2019-09-30T01:17:52.2036822Z LL |     for <item> in vec.iter().take(10 + 1).skip(5) {
2019-09-30T01:17:52.2036898Z 
2019-09-30T01:17:52.2036898Z 
2019-09-30T01:17:52.2036959Z error: the loop variable `i` is used to index `vec`
2019-09-30T01:17:52.2037176Z   --> $DIR/needless_range_loop.rs:147:14
2019-09-30T01:17:52.2037220Z    |
2019-09-30T01:17:52.2037278Z LL |     for i in 5..vec.len() {
2019-09-30T01:17:52.2037363Z help: consider using an iterator
2019-09-30T01:17:52.2037403Z    |
2019-09-30T01:17:52.2037403Z    |
2019-09-30T01:17:52.2037463Z LL |     for (i, <item>) in vec.iter().enumerate().skip(5) {
2019-09-30T01:17:52.2037550Z 
2019-09-30T01:17:52.2037550Z 
2019-09-30T01:17:52.2037608Z error: the loop variable `i` is used to index `vec`
2019-09-30T01:17:52.2037824Z   --> $DIR/needless_range_loop.rs:151:14
2019-09-30T01:17:52.2038064Z LL |     for i in 5..10 {
2019-09-30T01:17:52.2038107Z    |              ^^^^^
2019-09-30T01:17:52.2038150Z help: consider using an iterator
2019-09-30T01:17:52.2038190Z    |
2019-09-30T01:17:52.2038190Z    |
2019-09-30T01:17:52.2038255Z LL |     for (i, <item>) in vec.iter().enumerate().take(10).skip(5) {
2019-09-30T01:17:52.2038337Z 
2019-09-30T01:17:52.2038337Z 
2019-09-30T01:17:52.2038393Z error: the loop variable `i` is used to index `vec`
2019-09-30T01:17:52.2038647Z   --> $DIR/needless_range_loop.rs:156:14
2019-09-30T01:17:52.2038691Z    |
2019-09-30T01:17:52.2038731Z LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2038922Z help: consider using an iterator
2019-09-30T01:17:52.2038962Z    |
2019-09-30T01:17:52.2038962Z    |
2019-09-30T01:17:52.2039011Z LL |     for (i, <item>) in vec.iter_mut().enumerate() {
2019-09-30T01:17:52.2039094Z 
2019-09-30T01:17:52.2039136Z error: aborting due to 22 previous errors
2019-09-30T01:17:52.2039171Z 
2019-09-30T01:17:52.2039196Z 
2019-09-30T01:17:52.2039196Z 
2019-09-30T01:17:52.2039221Z 
2019-09-30T01:17:52.2039260Z diff of stderr:
2019-09-30T01:17:52.2039288Z 
2019-09-30T01:17:52.2039552Z -error: the loop variable `i` is only used to index `ns`.
2019-09-30T01:17:52.2039765Z -  --> $DIR/needless_range_loop.rs:15:14
2019-09-30T01:17:52.2040154Z -LL |     for i in 3..10 {
2019-09-30T01:17:52.2040345Z -   |              ^^^^^
2019-09-30T01:17:52.2040518Z -   |
2019-09-30T01:17:52.2040518Z -   |
2019-09-30T01:17:52.2040759Z -   = note: `-D clippy::needless-range-loop` implied by `-D warnings`
2019-09-30T01:17:52.2041152Z -   |
2019-09-30T01:17:52.2041152Z -   |
2019-09-30T01:17:52.2041377Z -LL |     for <item> in ns.iter().take(10).skip(3) {
2019-09-30T01:17:52.2041880Z -
2019-09-30T01:17:52.2041880Z -
2019-09-30T01:17:52.2042104Z -error: the loop variable `i` is only used to index `ms`.
2019-09-30T01:17:52.2042353Z -  --> $DIR/needless_range_loop.rs:36:14
2019-09-30T01:17:52.2043480Z -LL |     for i in 0..ms.len() {
2019-09-30T01:17:52.2043694Z -   |              ^^^^^^^^^^^
2019-09-30T01:17:52.2043896Z -help: consider using an iterator
2019-09-30T01:17:52.2044071Z -   |
2019-09-30T01:17:52.2044071Z -   |
2019-09-30T01:17:52.2044268Z -LL |     for <item> in &mut ms {
2019-09-30T01:17:52.2044646Z -
2019-09-30T01:17:52.2044646Z -
2019-09-30T01:17:52.2044868Z -error: the loop variable `i` is only used to index `ms`.
2019-09-30T01:17:52.2045093Z -  --> $DIR/needless_range_loop.rs:42:14
2019-09-30T01:17:52.2045482Z -LL |     for i in 0..ms.len() {
2019-09-30T01:17:52.2045687Z -   |              ^^^^^^^^^^^
2019-09-30T01:17:52.2045889Z -help: consider using an iterator
2019-09-30T01:17:52.2046062Z -   |
2019-09-30T01:17:52.2046062Z -   |
2019-09-30T01:17:52.2046260Z -LL |     for <item> in &mut ms {
2019-09-30T01:17:52.2046646Z -
2019-09-30T01:17:52.2046646Z -
2019-09-30T01:17:52.2046867Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2047091Z -  --> $DIR/needless_range_loop.rs:66:14
2019-09-30T01:17:52.2047265Z -   |
2019-09-30T01:17:52.2047463Z -LL |     for i in x..x + 4 {
2019-09-30T01:17:52.2047866Z -help: consider using an iterator
2019-09-30T01:17:52.2048039Z -   |
2019-09-30T01:17:52.2048039Z -   |
2019-09-30T01:17:52.2048262Z -LL |     for <item> in vec.iter_mut().skip(x).take(4) {
2019-09-30T01:17:52.2048666Z -
2019-09-30T01:17:52.2048666Z -
2019-09-30T01:17:52.2048899Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2049121Z -  --> $DIR/needless_range_loop.rs:73:14
2019-09-30T01:17:52.2049296Z -   |
2019-09-30T01:17:52.2049493Z -LL |     for i in x..=x + 4 {
2019-09-30T01:17:52.2050022Z -help: consider using an iterator
2019-09-30T01:17:52.2050247Z -   |
2019-09-30T01:17:52.2050247Z -   |
2019-09-30T01:17:52.2050474Z -LL |     for <item> in vec.iter_mut().skip(x).take(4 + 1) {
2019-09-30T01:17:52.2050886Z -
2019-09-30T01:17:52.2050886Z -
2019-09-30T01:17:52.2051109Z -error: the loop variable `i` is only used to index `arr`.
2019-09-30T01:17:52.2051332Z -  --> $DIR/needless_range_loop.rs:79:14
2019-09-30T01:17:52.2051702Z -LL |     for i in 0..3 {
2019-09-30T01:17:52.2051903Z -   |              ^^^^
2019-09-30T01:17:52.2052107Z -help: consider using an iterator
2019-09-30T01:17:52.2052565Z -   |
2019-09-30T01:17:52.2052565Z -   |
2019-09-30T01:17:52.2052961Z -LL |     for <item> in &arr {
2019-09-30T01:17:52.2053344Z -
2019-09-30T01:17:52.2053344Z -
2019-09-30T01:17:52.2053567Z -error: the loop variable `i` is only used to index `arr`.
2019-09-30T01:17:52.2053793Z -  --> $DIR/needless_range_loop.rs:83:14
2019-09-30T01:17:52.2054173Z -LL |     for i in 0..2 {
2019-09-30T01:17:52.2054375Z -   |              ^^^^
2019-09-30T01:17:52.2054580Z -help: consider using an iterator
2019-09-30T01:17:52.2054755Z -   |
2019-09-30T01:17:52.2054755Z -   |
2019-09-30T01:17:52.2054969Z -LL |     for <item> in arr.iter().take(2) {
2019-09-30T01:17:52.2055366Z -
2019-09-30T01:17:52.2055366Z -
2019-09-30T01:17:52.2055590Z -error: the loop variable `i` is only used to index `arr`.
2019-09-30T01:17:52.2055812Z -  --> $DIR/needless_range_loop.rs:87:14
2019-09-30T01:17:52.2056184Z -LL |     for i in 1..3 {
2019-09-30T01:17:52.2056382Z -   |              ^^^^
2019-09-30T01:17:52.2056595Z -help: consider using an iterator
2019-09-30T01:17:52.2056771Z -   |
2019-09-30T01:17:52.2056771Z -   |
2019-09-30T01:17:52.2056985Z -LL |     for <item> in arr.iter().skip(1) {
2019-09-30T01:17:52.2057381Z -
2019-09-30T01:17:52.2057381Z -
2019-09-30T01:17:52.2057614Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2057839Z -  --> $DIR/needless_range_loop.rs:93:14
2019-09-30T01:17:52.2058017Z -   |
2019-09-30T01:17:52.2058220Z -LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2058634Z -help: consider using an iterator
2019-09-30T01:17:52.2058808Z -   |
2019-09-30T01:17:52.2058808Z -   |
2019-09-30T01:17:52.2059005Z -LL |     for <item> in &vec {
2019-09-30T01:17:52.2059381Z -
2019-09-30T01:17:52.2059381Z -
2019-09-30T01:17:52.2059605Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2059831Z -  --> $DIR/needless_range_loop.rs:102:14
2019-09-30T01:17:52.2060009Z -   |
2019-09-30T01:17:52.2060219Z -LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2060631Z -help: consider using an iterator
2019-09-30T01:17:52.2060806Z -   |
2019-09-30T01:17:52.2060806Z -   |
2019-09-30T01:17:52.2061002Z -LL |     for <item> in &vec {
2019-09-30T01:17:52.2061389Z -
2019-09-30T01:17:52.2061389Z -
2019-09-30T01:17:52.2061616Z -error: the loop variable `j` is only used to index `STATIC`.
2019-09-30T01:17:52.2061841Z -  --> $DIR/needless_range_loop.rs:107:14
2019-09-30T01:17:52.2062016Z -   |
2019-09-30T01:17:52.2062211Z -LL |     for j in 0..4 {
2019-09-30T01:17:52.2063467Z -help: consider using an iterator
2019-09-30T01:17:52.2063641Z -   |
2019-09-30T01:17:52.2063641Z -   |
2019-09-30T01:17:52.2063838Z -LL |     for <item> in &STATIC {
2019-09-30T01:17:52.2064218Z -
2019-09-30T01:17:52.2064218Z -
2019-09-30T01:17:52.2064443Z -error: the loop variable `j` is only used to index `CONST`.
2019-09-30T01:17:52.2064683Z -  --> $DIR/needless_range_loop.rs:111:14
2019-09-30T01:17:52.2064858Z -   |
2019-09-30T01:17:52.2065049Z -LL |     for j in 0..4 {
2019-09-30T01:17:52.2065496Z -help: consider using an iterator
2019-09-30T01:17:52.2065671Z -   |
2019-09-30T01:17:52.2065671Z -   |
2019-09-30T01:17:52.2066006Z -LL |     for <item> in &CONST {
2019-09-30T01:17:52.2066438Z -
2019-09-30T01:17:52.2066438Z -
2019-09-30T01:17:52.2066659Z -error: the loop variable `i` is used to index `vec`
2019-09-30T01:17:52.2066884Z -  --> $DIR/needless_range_loop.rs:115:14
2019-09-30T01:17:52.2067064Z -   |
2019-09-30T01:17:52.2067263Z -LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2067669Z -help: consider using an iterator
2019-09-30T01:17:52.2067844Z -   |
2019-09-30T01:17:52.2067844Z -   |
2019-09-30T01:17:52.2068064Z -LL |     for (i, <item>) in vec.iter().enumerate() {
2019-09-30T01:17:52.2068593Z -
2019-09-30T01:17:52.2068593Z -
2019-09-30T01:17:52.2068819Z -error: the loop variable `i` is only used to index `vec2`.
2019-09-30T01:17:52.2069046Z -  --> $DIR/needless_range_loop.rs:123:14
2019-09-30T01:17:52.2069224Z -   |
2019-09-30T01:17:52.2069424Z -LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2069845Z -help: consider using an iterator
2019-09-30T01:17:52.2070020Z -   |
2019-09-30T01:17:52.2070020Z -   |
2019-09-30T01:17:52.2070240Z -LL |     for <item> in vec2.iter().take(vec.len()) {
2019-09-30T01:17:52.2070646Z -
2019-09-30T01:17:52.2070646Z -
2019-09-30T01:17:52.2070869Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2071091Z -  --> $DIR/needless_range_loop.rs:127:14
2019-09-30T01:17:52.2071268Z -   |
2019-09-30T01:17:52.2071469Z -LL |     for i in 5..vec.len() {
2019-09-30T01:17:52.2072060Z -help: consider using an iterator
2019-09-30T01:17:52.2072247Z -   |
2019-09-30T01:17:52.2072247Z -   |
2019-09-30T01:17:52.2072665Z -LL |     for <item> in vec.iter().skip(5) {
2019-09-30T01:17:52.2073115Z -
2019-09-30T01:17:52.2073115Z -
2019-09-30T01:17:52.2073338Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2073573Z -  --> $DIR/needless_range_loop.rs:131:14
2019-09-30T01:17:52.2073948Z -LL |     for i in 0..MAX_LEN {
2019-09-30T01:17:52.2074154Z -   |              ^^^^^^^^^^
2019-09-30T01:17:52.2074355Z -help: consider using an iterator
2019-09-30T01:17:52.2074529Z -   |
2019-09-30T01:17:52.2074529Z -   |
2019-09-30T01:17:52.2074745Z -LL |     for <item> in vec.iter().take(MAX_LEN) {
2019-09-30T01:17:52.2075142Z -
2019-09-30T01:17:52.2075142Z -
2019-09-30T01:17:52.2075365Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2075587Z -  --> $DIR/needless_range_loop.rs:135:14
2019-09-30T01:17:52.2075761Z -   |
2019-09-30T01:17:52.2075969Z -LL |     for i in 0..=MAX_LEN {
2019-09-30T01:17:52.2076378Z -help: consider using an iterator
2019-09-30T01:17:52.2076551Z -   |
2019-09-30T01:17:52.2076551Z -   |
2019-09-30T01:17:52.2076771Z -LL |     for <item> in vec.iter().take(MAX_LEN + 1) {
2019-09-30T01:17:52.2077180Z -
2019-09-30T01:17:52.2077180Z -
2019-09-30T01:17:52.2077402Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2077625Z -  --> $DIR/needless_range_loop.rs:139:14
2019-09-30T01:17:52.2077995Z -LL |     for i in 5..10 {
2019-09-30T01:17:52.2078194Z -   |              ^^^^^
2019-09-30T01:17:52.2078397Z -help: consider using an iterator
2019-09-30T01:17:52.2078569Z -   |
2019-09-30T01:17:52.2078569Z -   |
2019-09-30T01:17:52.2078795Z -LL |     for <item> in vec.iter().take(10).skip(5) {
2019-09-30T01:17:52.2079190Z -
2019-09-30T01:17:52.2079190Z -
2019-09-30T01:17:52.2079411Z -error: the loop variable `i` is only used to index `vec`.
2019-09-30T01:17:52.2079644Z -  --> $DIR/needless_range_loop.rs:143:14
2019-09-30T01:17:52.2080014Z -LL |     for i in 5..=10 {
2019-09-30T01:17:52.2080216Z -   |              ^^^^^^
2019-09-30T01:17:52.2080551Z -help: consider using an iterator
2019-09-30T01:17:52.2080771Z -   |
2019-09-30T01:17:52.2080771Z -   |
2019-09-30T01:17:52.2081005Z -LL |     for <item> in vec.iter().take(10 + 1).skip(5) {
2019-09-30T01:17:52.2081406Z -
2019-09-30T01:17:52.2081406Z -
2019-09-30T01:17:52.2081624Z -error: the loop variable `i` is used to index `vec`
2019-09-30T01:17:52.2081847Z -  --> $DIR/needless_range_loop.rs:147:14
2019-09-30T01:17:52.2082024Z -   |
2019-09-30T01:17:52.2082225Z -LL |     for i in 5..vec.len() {
2019-09-30T01:17:52.2082868Z -help: consider using an iterator
2019-09-30T01:17:52.2083045Z -   |
2019-09-30T01:17:52.2083045Z -   |
2019-09-30T01:17:52.2083284Z -LL |     for (i, <item>) in vec.iter().enumerate().skip(5) {
2019-09-30T01:17:52.2083855Z -
2019-09-30T01:17:52.2083855Z -
2019-09-30T01:17:52.2084072Z -error: the loop variable `i` is used to index `vec`
2019-09-30T01:17:52.2084307Z -  --> $DIR/needless_range_loop.rs:151:14
2019-09-30T01:17:52.2084676Z -LL |     for i in 5..10 {
2019-09-30T01:17:52.2084877Z -   |              ^^^^^
2019-09-30T01:17:52.2085076Z -help: consider using an iterator
2019-09-30T01:17:52.2085249Z -   |
2019-09-30T01:17:52.2085249Z -   |
2019-09-30T01:17:52.2085495Z -LL |     for (i, <item>) in vec.iter().enumerate().take(10).skip(5) {
2019-09-30T01:17:52.2085909Z -
2019-09-30T01:17:52.2085909Z -
2019-09-30T01:17:52.2086131Z -error: the loop variable `i` is used to index `vec`
2019-09-30T01:17:52.2086347Z -  --> $DIR/needless_range_loop.rs:156:14
2019-09-30T01:17:52.2086522Z -   |
2019-09-30T01:17:52.2086722Z -LL |     for i in 0..vec.len() {
2019-09-30T01:17:52.2087144Z -help: consider using an iterator
2019-09-30T01:17:52.2087315Z -   |
2019-09-30T01:17:52.2087315Z -   |
2019-09-30T01:17:52.2087548Z -LL |     for (i, <item>) in vec.iter_mut().enumerate() {
2019-09-30T01:17:52.2087954Z -
2019-09-30T01:17:52.2088174Z -error: aborting due to 22 previous errors
2019-09-30T01:17:52.2088347Z -
2019-09-30T01:17:52.2088512Z -
---
2019-09-30T01:17:52.2089400Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'needless_range_loop.rs'
2019-09-30T01:17:52.2089453Z 
2019-09-30T01:17:52.2089497Z error: 1 errors occurred comparing output.
2019-09-30T01:17:52.2089549Z status: exit code: 0
2019-09-30T01:17:52.2091064Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/needless_range_loop.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/needless_range_loop.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/needless_range_loop.stage-id.aux" "-A" "unused"
2019-09-30T01:17:52.2091510Z ------------------------------------------
2019-09-30T01:17:52.2091543Z 
2019-09-30T01:17:52.2091754Z ------------------------------------------
2019-09-30T01:17:52.2091810Z stderr:
---
2019-09-30T01:17:52.2094060Z    |
2019-09-30T01:17:52.2094116Z    = note: `#[deny(const_err)]` on by default
2019-09-30T01:17:52.2094145Z 
2019-09-30T01:17:52.2094379Z thread 'rustc' panicked at 'assertion failed: `(left == right)`
2019-09-30T01:17:52.2094428Z   left: `Size { raw: 0 }`,
2019-09-30T01:17:52.2094712Z  right: `Size { raw: 1 }`: Size mismatch when writing bits', src/librustc_mir/interpret/place.rs:736:21
2019-09-30T01:17:52.2094807Z 
2019-09-30T01:17:52.2094874Z error: internal compiler error: unexpected panic
2019-09-30T01:17:52.2094904Z 
2019-09-30T01:17:52.2094948Z note: the compiler unexpectedly panicked. this is a bug.
2019-09-30T01:17:52.2094948Z note: the compiler unexpectedly panicked. this is a bug.
2019-09-30T01:17:52.2094978Z 
2019-09-30T01:17:52.2095396Z note: we would appreciate a bug report: ***/blob/master/CONTRIBUTING.md#bug-reports
2019-09-30T01:17:52.2095678Z note: rustc 1.40.0-dev running on x86_64-unknown-linux-gnu
2019-09-30T01:17:52.2095724Z 
2019-09-30T01:17:52.2095943Z note: compiler flags: -Z ui-testing -C prefer-dynamic
2019-09-30T01:17:52.2095975Z 
---
2019-09-30T01:17:52.2101751Z -LL |     &empty[1..5];
2019-09-30T01:17:52.2101951Z -   |            ^
2019-09-30T01:17:52.2102124Z -   |
2019-09-30T01:17:52.2102360Z -   = note: `-D clippy::out-of-bounds-indexing` implied by `-D warnings`
2019-09-30T01:17:52.2102864Z +thread 'rustc' panicked at 'assertion failed: `(left == right)`
2019-09-30T01:17:52.2102925Z +  left: `Size { raw: 0 }`,
2019-09-30T01:17:52.2103205Z + right: `Size { raw: 1 }`: Size mismatch when writing bits', src/librustc_mir/interpret/place.rs:736:21
2019-09-30T01:17:52.2103278Z +note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace.
2019-09-30T01:17:52.2103522Z -error: range is out of bounds
2019-09-30T01:17:52.2103736Z -  --> $DIR/empty_array.rs:8:16
2019-09-30T01:17:52.2103913Z -   |
2019-09-30T01:17:52.2104104Z -LL |     &empty[0..=4];
---
2019-09-30T01:17:52.2105905Z -  --> $DIR/empty_array.rs:10:12
2019-09-30T01:17:52.2106081Z -   |
2019-09-30T01:17:52.2106271Z -LL |     &empty[1..];
2019-09-30T01:17:52.2106472Z -   |            ^
2019-09-30T01:17:52.2106806Z +note: we would appreciate a bug report: ***/blob/master/CONTRIBUTING.md#bug-reports
2019-09-30T01:17:52.2107084Z -error: range is out of bounds
2019-09-30T01:17:52.2107287Z -  --> $DIR/empty_array.rs:11:14
2019-09-30T01:17:52.2107464Z -   |
2019-09-30T01:17:52.2107678Z -LL |     &empty[..4];
---
2019-09-30T01:17:52.2108681Z -  --> $DIR/empty_array.rs:12:16
2019-09-30T01:17:52.2108902Z -   |
2019-09-30T01:17:52.2109112Z -LL |     &empty[0..=0];
2019-09-30T01:17:52.2109302Z -   |                ^
2019-09-30T01:17:52.2109523Z +note: compiler flags: -Z ui-testing -C prefer-dynamic
2019-09-30T01:17:52.2109777Z -error: range is out of bounds
2019-09-30T01:17:52.2109978Z -  --> $DIR/empty_array.rs:13:15
2019-09-30T01:17:52.2110154Z -   |
2019-09-30T01:17:52.2110360Z -LL |     &empty[..=0];
---
2019-09-30T01:17:52.2112618Z tests/ui/update-references.sh '/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base' 'out_of_bounds_indexing/empty_array.rs'
2019-09-30T01:17:52.2112676Z 
2019-09-30T01:17:52.2112737Z error: 1 errors occurred comparing output.
2019-09-30T01:17:52.2112779Z status: exit code: 101
2019-09-30T01:17:52.2114317Z command: "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools-bin/clippy-driver" "tests/ui/out_of_bounds_indexing/empty_array.rs" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base" "--target=x86_64-unknown-linux-gnu" "--error-format" "json" "-C" "prefer-dynamic" "-o" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/out_of_bounds_indexing/empty_array.stage-id" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps" "-Dwarnings" "-Zui-testing" "--extern" "serde=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libserde-23d814d56e4a27a6.rlib" "--extern" "regex=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libregex-28e39b75b54d56f5.rlib" "--extern" "clippy_lints=/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/release/deps/libclippy_lints-00261d9ef13abc66.rlib" "-L" "/checkout/obj/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-linux-gnu/release/build/clippy-7ccc90d9ed54ca9b/out/test_build_base/out_of_bounds_indexing/empty_array.stage-id.aux" "-A" "unused"
2019-09-30T01:17:52.2114783Z ------------------------------------------
2019-09-30T01:17:52.2114826Z 
2019-09-30T01:17:52.2115085Z ------------------------------------------
2019-09-30T01:17:52.2115131Z stderr:
2019-09-30T01:17:52.2115131Z stderr:
2019-09-30T01:17:52.2115361Z ------------------------------------------
2019-09-30T01:17:52.2116509Z {"message":"index out of bounds: the len is 0 but the index is 0","code":{"code":"const_err","explanation":null},"level":"error","spans":[{"file_name":"tests/ui/out_of_bounds_indexing/empty_array.rs","byte_start":147,"byte_end":155,"line_start":6,"line_end":6,"column_start":5,"column_end":13,"is_primary":true,"text":[{"text":"    empty[0];","highlight_start":5,"highlight_end":13}],"label":null,"suggested_replacement":null,"suggestion_applicability":null,"expansion":null}],"children":[{"message":"`#[deny(const_err)]` on by default","code":null,"level":"note","spans":[],"children":[],"rendered":null}],"rendered":"error: index out of bounds: the len is 0 but the index is 0\n  --> tests/ui/out_of_bounds_indexing/empty_array.rs:6:5\n   |\nLL |     empty[0];\n   |     ^^^^^^^^\n   |\n   = note: `#[deny(const_err)]` on by default\n\n"}
2019-09-30T01:17:52.2116897Z thread 'rustc' panicked at 'assertion failed: `(left == right)`
2019-09-30T01:17:52.2116951Z   left: `Size { raw: 0 }`,
2019-09-30T01:17:52.2117250Z  right: `Size { raw: 1 }`: Size mismatch when writing bits', src/librustc_mir/interpret/place.rs:736:21
2019-09-30T01:17:52.2117365Z 
2019-09-30T01:17:52.2117411Z error: internal compiler error: unexpected panic
2019-09-30T01:17:52.2117453Z 
2019-09-30T01:17:52.2117500Z note: the compiler unexpectedly panicked. this is a bug.
2019-09-30T01:17:52.2117500Z note: the compiler unexpectedly panicked. this is a bug.
2019-09-30T01:17:52.2117531Z 
2019-09-30T01:17:52.2118042Z note: we would appreciate a bug report: ***/blob/master/CONTRIBUTING.md#bug-reports
2019-09-30T01:17:52.2118348Z note: rustc 1.40.0-dev running on x86_64-unknown-linux-gnu
2019-09-30T01:17:52.2118381Z 
2019-09-30T01:17:52.2118634Z note: compiler flags: -Z ui-testing -C prefer-dynamic
2019-09-30T01:17:52.2118678Z 
---
2019-09-30T02:00:48.1506830Z Verifying status of rustfmt...
2019-09-30T02:00:48.1524363Z Verifying status of clippy-driver...
2019-09-30T02:00:48.1539168Z This PR updated 'src/tools/clippy', verifying if status is 'test-pass'...
2019-09-30T02:00:48.1554662Z 
2019-09-30T02:00:48.1555294Z ⚠️ We detected that this PR updated 'clippy-driver', but its tests failed.
2019-09-30T02:00:48.1555340Z 
2019-09-30T02:00:48.1555684Z If you do intend to update 'clippy-driver', please check the error messages above and
2019-09-30T02:00:48.1555747Z commit another update.
2019-09-30T02:00:48.1555779Z 
2019-09-30T02:00:48.1556083Z If you do NOT intend to update 'clippy-driver', please ensure you did not accidentally
2019-09-30T02:00:48.1557578Z change the submodule at 'src/tools/clippy'. You may ask your reviewer for the
2019-09-30T02:00:48.1557942Z proper steps.
2019-09-30T02:00:48.1577698Z   local time: Mon Sep 30 02:00:48 UTC 2019
2019-09-30T02:00:48.5225973Z   network time: Mon, 30 Sep 2019 02:00:48 GMT
2019-09-30T02:00:48.5231039Z == end clock drift check ==
2019-09-30T02:00:48.5231039Z == end clock drift check ==
2019-09-30T02:00:49.6622311Z ##[error]Bash exited with code '3'.
2019-09-30T02:00:49.6687221Z ##[section]Starting: Checkout
2019-09-30T02:00:49.6689606Z ==============================================================================
2019-09-30T02:00:49.6689670Z Task         : Get sources
2019-09-30T02:00:49.6689722Z Description  : Get sources from a repository. Supports Git, TfsVC, and SVN repositories.

I'm a bot! I can only do what humans tell me to, so if this was not helpful or you have suggestions for improvements, please ping or otherwise contact @TimNN. (Feature Requests)

JohnTitor · 2019-09-30T02:37:28Z

Hmm, oddly, some stderr have gone.

mati865 · 2019-09-30T07:24:00Z

Seems to be caused by Clippy. Tests don't work because compiler crashes.

Manishearth · 2019-09-30T16:34:36Z

These seem to be new failures caused in the tests since the last clippy update, i.e something changed in the compiler in the time it took for us to do the clippyup.

Manishearth · 2019-09-30T18:25:06Z

It was broken by something in #64902

JohnTitor · 2019-09-30T19:25:09Z

It seems some loop lints are broken.

Manishearth · 2019-10-01T17:13:41Z

Figured it out. It was #64825

Manishearth · 2019-10-01T17:32:45Z

rust-lang/rust-clippy#4604

will open a new PR

Manishearth · 2019-10-01T17:35:22Z

#64963

rust-highfive assigned oli-obk Sep 28, 2019

rust-highfive added the S-waiting-on-review Status: Awaiting review from the assignee but also interested parties. label Sep 28, 2019

bors added S-waiting-on-bors Status: Waiting on bors to run and complete tests. Bors will change the label on completion. and removed S-waiting-on-review Status: Awaiting review from the assignee but also interested parties. labels Sep 28, 2019

bors added S-waiting-on-review Status: Awaiting review from the assignee but also interested parties. and removed S-waiting-on-bors Status: Waiting on bors to run and complete tests. Bors will change the label on completion. labels Sep 28, 2019

tesuji mentioned this pull request Sep 29, 2019

Update clippy #64900

Closed

JohnTitor closed this Sep 29, 2019

JohnTitor reopened this Sep 29, 2019

Update clippy

0e98559

JohnTitor force-pushed the update-clippy branch from 7f82487 to 0e98559 Compare September 29, 2019 23:05

Manishearth closed this Oct 1, 2019

JohnTitor deleted the update-clippy branch March 27, 2020 00:53

Uh oh!

Conversation

JohnTitor commented Sep 28, 2019

Uh oh!

rust-highfive commented Sep 28, 2019

Uh oh!

oli-obk commented Sep 28, 2019

Uh oh!

bors commented Sep 28, 2019

Uh oh!

bors commented Sep 28, 2019

Uh oh!

rust-highfive commented Sep 28, 2019

Uh oh!

bors commented Sep 28, 2019

Uh oh!

JohnTitor commented Sep 29, 2019

Uh oh!

JohnTitor commented Sep 29, 2019

Uh oh!

JohnTitor commented Sep 29, 2019

Uh oh!

JohnTitor commented Sep 29, 2019

Uh oh!

rust-highfive commented Sep 29, 2019

Uh oh!

rust-highfive commented Sep 30, 2019

Uh oh!

JohnTitor commented Sep 30, 2019

Uh oh!

mati865 commented Sep 30, 2019

Uh oh!

Manishearth commented Sep 30, 2019

Uh oh!

Manishearth commented Sep 30, 2019

Uh oh!

JohnTitor commented Sep 30, 2019

Uh oh!

Manishearth commented Oct 1, 2019

Uh oh!

Manishearth commented Oct 1, 2019

Uh oh!

Manishearth commented Oct 1, 2019

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

6 participants