Releases: thatSFguy/reticulum-rnode
Release list
v0.5.2
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.5.1
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.5.0
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.4.5
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.4.4
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.4.3
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.4.1
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.4.0
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.3.8
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.
v0.3.7
Flashing
The easiest way to flash is the web flasher — visit
https://thatSFguy.github.io/reticulum-rnode/
and pick this version from the dropdown. No toolchain
install required, works in any Chromium-based browser.
Manual flashing
Per-board assets attached to this release:
| File | How to use |
|---|---|
*.zip |
adafruit-nrfutil dfu serial -pkg <zip> -p <port>, or the web flasher |
*.uf2 |
Drag-and-drop onto NICENANO/XIAOBOOT USB drive (double-tap reset first) |
*.hex |
nRFConnect Programmer, J-Link Commander, or any SWD tool |
Put the board in bootloader mode (double-tap reset within
~500 ms) before flashing over serial or UF2.