Connect Network Device

This is where you start to connect a network device to your SDN Developer Lab. The process is:

1. Decide which API(s) your application will use.
2. Select your network device vendor from table below. Don't see your vendor? Try the 'Other Vendor' process (last bullet below), also email us your vendor so we can add it: support@elbrys.com
3. Find the column for the API(s) your application will use and follow the directions you find there.
4. Once you have your network device connected you can try-out/write SDN Applications that monitor or control it at the sample applications page.

	Vendor	Setup for RESTCONF	Setup for OpenNAC
	Tallac	[[ Setup	Tallac-RestConf]]
	Pica8	[[ Setup	Pica8-RestConf]]
	HP	[[ Setup	HP-RestConf]]
	Mininet	[[ Setup	Mininet-RestConf]]
	Brocade	[[ Setup	Brocade-RestConf]]
	Cisco	Coming	Coming
OTHER	Other Vendor	[[ Setup	Other-RestConf]]